linux/arch/arm/mach-sa1100/include/mach/collie.h
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00

89 lines
3.7 KiB
C

/*
* arch/arm/mach-sa1100/include/mach/collie.h
*
* This file contains the hardware specific definitions for Assabet
* Only include this file from SA1100-specific files.
*
* ChangeLog:
* 04-06-2001 Lineo Japan, Inc.
* 04-16-2001 SHARP Corporation
* 07-07-2002 Chris Larson <clarson@digi.com>
*
*/
#ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H
#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
COLLIE_SCP_LB_VOL_CHG )
#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
COLLIE_SCP_CHARGE_ON )
/* GPIOs for which the generic definition doesn't say much */
#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
#define COLLIE_GPIO_CO GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
/* Interrupts */
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0
#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1
#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2
#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3
#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13
#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
#endif