linux/Documentation/sound/soc/dapm.rst

361 lines
11 KiB
ReStructuredText

===================================================
Dynamic Audio Power Management for Portable Devices
===================================================
Description
===========
Dynamic Audio Power Management (DAPM) is designed to allow portable
Linux devices to use the minimum amount of power within the audio
subsystem at all times. It is independent of other kernel PM and as
such, can easily co-exist with the other PM systems.
DAPM is also completely transparent to all user space applications as
all power switching is done within the ASoC core. No code changes or
recompiling are required for user space applications. DAPM makes power
switching decisions based upon any audio stream (capture/playback)
activity and audio mixer settings within the device.
DAPM spans the whole machine. It covers power control within the entire
audio subsystem, this includes internal codec power blocks and machine
level power systems.
There are 4 power domains within DAPM
Codec bias domain
VREF, VMID (core codec and audio power)
Usually controlled at codec probe/remove and suspend/resume, although
can be set at stream time if power is not needed for sidetone, etc.
Platform/Machine domain
physically connected inputs and outputs
Is platform/machine and user action specific, is configured by the
machine driver and responds to asynchronous events e.g when HP
are inserted
Path domain
audio subsystem signal paths
Automatically set when mixer and mux settings are changed by the user.
e.g. alsamixer, amixer.
Stream domain
DACs and ADCs.
Enabled and disabled when stream playback/capture is started and
stopped respectively. e.g. aplay, arecord.
All DAPM power switching decisions are made automatically by consulting an audio
routing map of the whole machine. This map is specific to each machine and
consists of the interconnections between every audio component (including
internal codec components). All audio components that effect power are called
widgets hereafter.
DAPM Widgets
============
Audio DAPM widgets fall into a number of types:-
Mixer
Mixes several analog signals into a single analog signal.
Mux
An analog switch that outputs only one of many inputs.
PGA
A programmable gain amplifier or attenuation widget.
ADC
Analog to Digital Converter
DAC
Digital to Analog Converter
Switch
An analog switch
Input
A codec input pin
Output
A codec output pin
Headphone
Headphone (and optional Jack)
Mic
Mic (and optional Jack)
Line
Line Input/Output (and optional Jack)
Speaker
Speaker
Supply
Power or clock supply widget used by other widgets.
Regulator
External regulator that supplies power to audio components.
Clock
External clock that supplies clock to audio components.
AIF IN
Audio Interface Input (with TDM slot mask).
AIF OUT
Audio Interface Output (with TDM slot mask).
Siggen
Signal Generator.
DAI IN
Digital Audio Interface Input.
DAI OUT
Digital Audio Interface Output.
DAI Link
DAI Link between two DAI structures
Pre
Special PRE widget (exec before all others)
Post
Special POST widget (exec after all others)
Buffer
Inter widget audio data buffer within a DSP.
Scheduler
DSP internal scheduler that schedules component/pipeline processing
work.
Effect
Widget that performs an audio processing effect.
SRC
Sample Rate Converter within DSP or CODEC
ASRC
Asynchronous Sample Rate Converter within DSP or CODEC
Encoder
Widget that encodes audio data from one format (usually PCM) to another
usually more compressed format.
Decoder
Widget that decodes audio data from a compressed format to an
uncompressed format like PCM.
(Widgets are defined in include/sound/soc-dapm.h)
Widgets can be added to the sound card by any of the component driver types.
There are convenience macros defined in soc-dapm.h that can be used to quickly
build a list of widgets of the codecs and machines DAPM widgets.
Most widgets have a name, register, shift and invert. Some widgets have extra
parameters for stream name and kcontrols.
Stream Domain Widgets
---------------------
Stream Widgets relate to the stream power domain and only consist of ADCs
(analog to digital converters), DACs (digital to analog converters),
AIF IN and AIF OUT.
Stream widgets have the following format:-
::
SND_SOC_DAPM_DAC(name, stream name, reg, shift, invert),
SND_SOC_DAPM_AIF_IN(name, stream, slot, reg, shift, invert)
NOTE: the stream name must match the corresponding stream name in your codec
snd_soc_codec_dai.
e.g. stream widgets for HiFi playback and capture
::
SND_SOC_DAPM_DAC("HiFi DAC", "HiFi Playback", REG, 3, 1),
SND_SOC_DAPM_ADC("HiFi ADC", "HiFi Capture", REG, 2, 1),
e.g. stream widgets for AIF
::
SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
Path Domain Widgets
-------------------
Path domain widgets have a ability to control or affect the audio signal or
audio paths within the audio subsystem. They have the following form:-
::
SND_SOC_DAPM_PGA(name, reg, shift, invert, controls, num_controls)
Any widget kcontrols can be set using the controls and num_controls members.
e.g. Mixer widget (the kcontrols are declared first)
::
/* Output Mixer */
static const snd_kcontrol_new_t wm8731_output_mixer_controls[] = {
SOC_DAPM_SINGLE("Line Bypass Switch", WM8731_APANA, 3, 1, 0),
SOC_DAPM_SINGLE("Mic Sidetone Switch", WM8731_APANA, 5, 1, 0),
SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
};
SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
ARRAY_SIZE(wm8731_output_mixer_controls)),
If you don't want the mixer elements prefixed with the name of the mixer widget,
you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
as for SND_SOC_DAPM_MIXER.
Machine domain Widgets
----------------------
Machine widgets are different from codec widgets in that they don't have a
codec register bit associated with them. A machine widget is assigned to each
machine audio component (non codec or DSP) that can be independently
powered. e.g.
* Speaker Amp
* Microphone Bias
* Jack connectors
A machine widget can have an optional call back.
e.g. Jack connector widget for an external Mic that enables Mic Bias
when the Mic is inserted:-::
static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
{
gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
SND_SOC_DAPM_MIC("Mic Jack", spitz_mic_bias),
Codec (BIAS) Domain
-------------------
The codec bias power domain has no widgets and is handled by the codecs DAPM
event handler. This handler is called when the codec powerstate is changed wrt
to any stream event or by kernel PM events.
Virtual Widgets
---------------
Sometimes widgets exist in the codec or machine audio map that don't have any
corresponding soft power control. In this case it is necessary to create
a virtual widget - a widget with no control bits e.g.
::
SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
This can be used to merge to signal paths together in software.
After all the widgets have been defined, they can then be added to the DAPM
subsystem individually with a call to snd_soc_dapm_new_control().
Codec/DSP Widget Interconnections
=================================
Widgets are connected to each other within the codec, platform and machine by
audio paths (called interconnections). Each interconnection must be defined in
order to create a map of all audio paths between widgets.
This is easiest with a diagram of the codec or DSP (and schematic of the machine
audio system), as it requires joining widgets together via their audio signal
paths.
e.g., from the WM8731 output mixer (wm8731.c)
The WM8731 output mixer has 3 inputs (sources)
1. Line Bypass Input
2. DAC (HiFi playback)
3. Mic Sidetone Input
Each input in this example has a kcontrol associated with it (defined in example
above) and is connected to the output mixer via its kcontrol name. We can now
connect the destination widget (wrt audio signal) with its source widgets.
::
/* output mixer */
{"Output Mixer", "Line Bypass Switch", "Line Input"},
{"Output Mixer", "HiFi Playback Switch", "DAC"},
{"Output Mixer", "Mic Sidetone Switch", "Mic Bias"},
So we have :-
* Destination Widget <=== Path Name <=== Source Widget, or
* Sink, Path, Source, or
* ``Output Mixer`` is connected to the ``DAC`` via the ``HiFi Playback Switch``.
When there is no path name connecting widgets (e.g. a direct connection) we
pass NULL for the path name.
Interconnections are created with a call to:-
::
snd_soc_dapm_connect_input(codec, sink, path, source);
Finally, snd_soc_dapm_new_widgets(codec) must be called after all widgets and
interconnections have been registered with the core. This causes the core to
scan the codec and machine so that the internal DAPM state matches the
physical state of the machine.
Machine Widget Interconnections
-------------------------------
Machine widget interconnections are created in the same way as codec ones and
directly connect the codec pins to machine level widgets.
e.g. connects the speaker out codec pins to the internal speaker.
::
/* ext speaker connected to codec pins LOUT2, ROUT2 */
{"Ext Spk", NULL , "ROUT2"},
{"Ext Spk", NULL , "LOUT2"},
This allows the DAPM to power on and off pins that are connected (and in use)
and pins that are NC respectively.
Endpoint Widgets
================
An endpoint is a start or end point (widget) of an audio signal within the
machine and includes the codec. e.g.
* Headphone Jack
* Internal Speaker
* Internal Mic
* Mic Jack
* Codec Pins
Endpoints are added to the DAPM graph so that their usage can be determined in
order to save power. e.g. NC codecs pins will be switched OFF, unconnected
jacks can also be switched OFF.
DAPM Widget Events
==================
Some widgets can register their interest with the DAPM core in PM events.
e.g. A Speaker with an amplifier registers a widget so the amplifier can be
powered only when the spk is in use.
::
/* turn speaker amplifier on/off depending on use */
static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
{
gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
/* corgi machine dapm widgets */
static const struct snd_soc_dapm_widget wm8731_dapm_widgets =
SND_SOC_DAPM_SPK("Ext Spk", corgi_amp_event);
Please see soc-dapm.h for all other widgets that support events.
Event types
-----------
The following event types are supported by event widgets.
::
/* dapm event types */
#define SND_SOC_DAPM_PRE_PMU 0x1 /* before widget power up */
#define SND_SOC_DAPM_POST_PMU 0x2 /* after widget power up */
#define SND_SOC_DAPM_PRE_PMD 0x4 /* before widget power down */
#define SND_SOC_DAPM_POST_PMD 0x8 /* after widget power down */
#define SND_SOC_DAPM_PRE_REG 0x10 /* before audio path setup */
#define SND_SOC_DAPM_POST_REG 0x20 /* after audio path setup */