OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6f7aeeec7e
linux/drivers/net/tulip/interrupt.c
Eric Dumazet 1a18abaa87 tulip: use integrated netdev stats 
struct tulip_private is a bit large (order-1 allocation even on 32bit
arch), try to shrink it, remove its net_device_stats field.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03 09:44:51 -07:00

812 lines
25 KiB
C
Raw Blame History

/*
drivers/net/tulip/interrupt.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
*/
#include <linux/pci.h>
#include "tulip.h"
#include <linux/etherdevice.h>
int tulip_rx_copybreak;
unsigned int tulip_max_interrupt_work;
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
#define MIT_SIZE 15
#define MIT_TABLE 15 /* We use 0 or max */
static unsigned int mit_table[MIT_SIZE+1] =
{
/* CRS11 21143 hardware Mitigation Control Interrupt
We use only RX mitigation we other techniques for
TX intr. mitigation.
31 Cycle Size (timer control)
30:27 TX timer in 16 * Cycle size
26:24 TX No pkts before Int.
23:20 RX timer in Cycle size
19:17 RX No pkts before Int.
16 Continues Mode (CM)
*/
0x0, /* IM disabled */
0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */
0x80150000,
0x80270000,
0x80370000,
0x80490000,
0x80590000,
0x80690000,
0x807B0000,
0x808B0000,
0x809D0000,
0x80AD0000,
0x80BD0000,
0x80CF0000,
0x80DF0000,
// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */
0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */
};
#endif
int tulip_refill_rx(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
int entry;
int refilled = 0;
/* Refill the Rx ring buffers. */
for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
entry = tp->dirty_rx % RX_RING_SIZE;
if (tp->rx_buffers[entry].skb == NULL) {
struct sk_buff *skb;
dma_addr_t mapping;
skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
if (skb == NULL)
break;
mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
tp->rx_buffers[entry].mapping = mapping;
skb->dev = dev; /* Mark as being used by this device. */
tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
refilled++;
}
tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
}
if(tp->chip_id == LC82C168) {
if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) {
/* Rx stopped due to out of buffers,
* restart it
*/
iowrite32(0x01, tp->base_addr + CSR2);
}
}
return refilled;
}
#ifdef CONFIG_TULIP_NAPI
void oom_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *)data;
struct tulip_private *tp = netdev_priv(dev);
napi_schedule(&tp->napi);
}
int tulip_poll(struct napi_struct *napi, int budget)
{
struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
struct net_device *dev = tp->dev;
int entry = tp->cur_rx % RX_RING_SIZE;
int work_done = 0;
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
int received = 0;
#endif
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
/* that one buffer is needed for mit activation; or might be a
bug in the ring buffer code; check later -- JHS*/
if (budget >=RX_RING_SIZE) budget--;
#endif
if (tulip_debug > 4)
printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
entry, tp->rx_ring[entry].status);
do {
if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
break;
}
/* Acknowledge current RX interrupt sources. */
iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
short pkt_len;
if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
break;
if (tulip_debug > 5)
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
dev->name, entry, status);
if (++work_done >= budget)
goto not_done;
/*
* Omit the four octet CRC from the length.
* (May not be considered valid until we have
* checked status for RxLengthOver2047 bits)
*/
pkt_len = ((status >> 16) & 0x7ff) - 4;
/*
* Maximum pkt_len is 1518 (1514 + vlan header)
* Anything higher than this is always invalid
* regardless of RxLengthOver2047 bits
*/
if ((status & (RxLengthOver2047 |
RxDescCRCError |
RxDescCollisionSeen |
RxDescRunt |
RxDescDescErr |
RxWholePkt)) != RxWholePkt ||
pkt_len > 1518) {
if ((status & (RxLengthOver2047 |
RxWholePkt)) != RxWholePkt) {
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
dev_warn(&dev->dev,
"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
status);
dev->stats.rx_length_errors++;
}
} else {
/* There was a fatal error. */
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
dev->name, status);
dev->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
(status & RxDescRunt))
dev->stats.rx_length_errors++;
if (status & 0x0004)
dev->stats.rx_frame_errors++;
if (status & 0x0002)
dev->stats.rx_crc_errors++;
if (status & 0x0001)
dev->stats.rx_fifo_errors++;
}
} else {
struct sk_buff *skb;
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
if (pkt_len < tulip_rx_copybreak &&
(skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single_for_cpu(tp->pdev,
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
#if ! defined(__alpha__)
skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
tp->rx_buffers[entry].skb->data,
pkt_len);
#endif
pci_dma_sync_single_for_device(tp->pdev,
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
} else { /* Pass up the skb already on the Rx ring. */
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
pkt_len);
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
dev_err(&dev->dev,
"Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
le32_to_cpu(tp->rx_ring[entry].buffer1),
(unsigned long long)tp->rx_buffers[entry].mapping,
skb->head, temp);
}
#endif
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
tp->rx_buffers[entry].skb = NULL;
tp->rx_buffers[entry].mapping = 0;
}
skb->protocol = eth_type_trans(skb, dev);
netif_receive_skb(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
}
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
received++;
#endif
entry = (++tp->cur_rx) % RX_RING_SIZE;
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
tulip_refill_rx(dev);
}
/* New ack strategy... irq does not ack Rx any longer
hopefully this helps */
/* Really bad things can happen here... If new packet arrives
* and an irq arrives (tx or just due to occasionally unset
* mask), it will be acked by irq handler, but new thread
* is not scheduled. It is major hole in design.
* No idea how to fix this if "playing with fire" will fail
* tomorrow (night 011029). If it will not fail, we won
* finally: amount of IO did not increase at all. */
} while ((ioread32(tp->base_addr + CSR5) & RxIntr));
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
/* We use this simplistic scheme for IM. It's proven by
real life installations. We can have IM enabled
continuesly but this would cause unnecessary latency.
Unfortunely we can't use all the NET_RX_* feedback here.
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
We monitor the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
ON: More then 1 pkt received (per intr.) OR we are dropping
OFF: Only 1 pkt received
Note. We only use min and max (0, 15) settings from mit_table */
if( tp->flags & HAS_INTR_MITIGATION) {
if( received > 1 ) {
if( ! tp->mit_on ) {
tp->mit_on = 1;
iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11);
}
}
else {
if( tp->mit_on ) {
tp->mit_on = 0;
iowrite32(0, tp->base_addr + CSR11);
}
}
}
#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
tulip_refill_rx(dev);
/* If RX ring is not full we are out of memory. */
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
goto oom;
/* Remove us from polling list and enable RX intr. */
napi_complete(napi);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
/* The last op happens after poll completion. Which means the following:
* 1. it can race with disabling irqs in irq handler
* 2. it can race with dise/enabling irqs in other poll threads
* 3. if an irq raised after beginning loop, it will be immediately
* triggered here.
*
* Summarizing: the logic results in some redundant irqs both
* due to races in masking and due to too late acking of already
* processed irqs. But it must not result in losing events.
*/
return work_done;
not_done:
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
tulip_refill_rx(dev);
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
goto oom;
return work_done;
oom: /* Executed with RX ints disabled */
/* Start timer, stop polling, but do not enable rx interrupts. */
mod_timer(&tp->oom_timer, jiffies+1);
/* Think: timer_pending() was an explicit signature of bug.
* Timer can be pending now but fired and completed
* before we did napi_complete(). See? We would lose it. */
/* remove ourselves from the polling list */
napi_complete(napi);
return work_done;
}
#else /* CONFIG_TULIP_NAPI */
static int tulip_rx(struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
int entry = tp->cur_rx % RX_RING_SIZE;
int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
int received = 0;
if (tulip_debug > 4)
printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
entry, tp->rx_ring[entry].status);
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
short pkt_len;
if (tulip_debug > 5)
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
dev->name, entry, status);
if (--rx_work_limit < 0)
break;
/*
Omit the four octet CRC from the length.
(May not be considered valid until we have
checked status for RxLengthOver2047 bits)
*/
pkt_len = ((status >> 16) & 0x7ff) - 4;
/*
Maximum pkt_len is 1518 (1514 + vlan header)
Anything higher than this is always invalid
regardless of RxLengthOver2047 bits
*/
if ((status & (RxLengthOver2047 |
RxDescCRCError |
RxDescCollisionSeen |
RxDescRunt |
RxDescDescErr |
RxWholePkt)) != RxWholePkt ||
pkt_len > 1518) {
if ((status & (RxLengthOver2047 |
RxWholePkt)) != RxWholePkt) {
/* Ingore earlier buffers. */
if ((status & 0xffff) != 0x7fff) {
if (tulip_debug > 1)
dev_warn(&dev->dev,
"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
status);
dev->stats.rx_length_errors++;
}
} else {
/* There was a fatal error. */
if (tulip_debug > 2)
printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
dev->name, status);
dev->stats.rx_errors++; /* end of a packet.*/
if (pkt_len > 1518 ||
(status & RxDescRunt))
dev->stats.rx_length_errors++;
if (status & 0x0004)
dev->stats.rx_frame_errors++;
if (status & 0x0002)
dev->stats.rx_crc_errors++;
if (status & 0x0001)
dev->stats.rx_fifo_errors++;
}
} else {
struct sk_buff *skb;
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
if (pkt_len < tulip_rx_copybreak &&
(skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single_for_cpu(tp->pdev,
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
#if ! defined(__alpha__)
skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
tp->rx_buffers[entry].skb->data,
pkt_len);
#endif
pci_dma_sync_single_for_device(tp->pdev,
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
} else { /* Pass up the skb already on the Rx ring. */
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
pkt_len);
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
dev_err(&dev->dev,
"Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n",
le32_to_cpu(tp->rx_ring[entry].buffer1),
(long long)tp->rx_buffers[entry].mapping,
skb->head, temp);
}
#endif
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
tp->rx_buffers[entry].skb = NULL;
tp->rx_buffers[entry].mapping = 0;
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
}
received++;
entry = (++tp->cur_rx) % RX_RING_SIZE;
}
return received;
}
#endif /* CONFIG_TULIP_NAPI */
static inline unsigned int phy_interrupt (struct net_device *dev)
{
#ifdef __hppa__
struct tulip_private *tp = netdev_priv(dev);
int csr12 = ioread32(tp->base_addr + CSR12) & 0xff;
if (csr12 != tp->csr12_shadow) {
/* ack interrupt */
iowrite32(csr12 | 0x02, tp->base_addr + CSR12);
tp->csr12_shadow = csr12;
/* do link change stuff */
spin_lock(&tp->lock);
tulip_check_duplex(dev);
spin_unlock(&tp->lock);
/* clear irq ack bit */
iowrite32(csr12 & ~0x02, tp->base_addr + CSR12);
return 1;
}
#endif
return 0;
}
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
irqreturn_t tulip_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = (struct net_device *)dev_instance;
struct tulip_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->base_addr;
int csr5;
int missed;
int rx = 0;
int tx = 0;
int oi = 0;
int maxrx = RX_RING_SIZE;
int maxtx = TX_RING_SIZE;
int maxoi = TX_RING_SIZE;
#ifdef CONFIG_TULIP_NAPI
int rxd = 0;
#else
int entry;
#endif
unsigned int work_count = tulip_max_interrupt_work;
unsigned int handled = 0;
/* Let's see whether the interrupt really is for us */
csr5 = ioread32(ioaddr + CSR5);
if (tp->flags & HAS_PHY_IRQ)
handled = phy_interrupt (dev);
if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
return IRQ_RETVAL(handled);
tp->nir++;
do {
#ifdef CONFIG_TULIP_NAPI
if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
rxd++;
/* Mask RX intrs and add the device to poll list. */
iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
napi_schedule(&tp->napi);
if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
break;
}
/* Acknowledge the interrupt sources we handle here ASAP
the poll function does Rx and RxNoBuf acking */
iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
#else
/* Acknowledge all of the current interrupt sources ASAP. */
iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
if (csr5 & (RxIntr | RxNoBuf)) {
rx += tulip_rx(dev);
tulip_refill_rx(dev);
}
#endif /* CONFIG_TULIP_NAPI */
if (tulip_debug > 4)
printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x\n",
dev->name, csr5, ioread32(ioaddr + CSR5));
if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
unsigned int dirty_tx;
spin_lock(&tp->lock);
for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
dirty_tx++) {
int entry = dirty_tx % TX_RING_SIZE;
int status = le32_to_cpu(tp->tx_ring[entry].status);
if (status < 0)
break; /* It still has not been Txed */
/* Check for Rx filter setup frames. */
if (tp->tx_buffers[entry].skb == NULL) {
/* test because dummy frames not mapped */
if (tp->tx_buffers[entry].mapping)
pci_unmap_single(tp->pdev,
tp->tx_buffers[entry].mapping,
sizeof(tp->setup_frame),
PCI_DMA_TODEVICE);
continue;
}
if (status & 0x8000) {
/* There was an major error, log it. */
#ifndef final_version
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
dev->name, status);
#endif
dev->stats.tx_errors++;
if (status & 0x4104)
dev->stats.tx_aborted_errors++;
if (status & 0x0C00)
dev->stats.tx_carrier_errors++;
if (status & 0x0200)
dev->stats.tx_window_errors++;
if (status & 0x0002)
dev->stats.tx_fifo_errors++;
if ((status & 0x0080) && tp->full_duplex == 0)
dev->stats.tx_heartbeat_errors++;
} else {
dev->stats.tx_bytes +=
tp->tx_buffers[entry].skb->len;
dev->stats.collisions += (status >> 3) & 15;
dev->stats.tx_packets++;
}
pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
tp->tx_buffers[entry].skb->len,
PCI_DMA_TODEVICE);
/* Free the original skb. */
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
tx++;
}
#ifndef final_version
if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
dev_err(&dev->dev,
"Out-of-sync dirty pointer, %d vs. %d\n",
dirty_tx, tp->cur_tx);
dirty_tx += TX_RING_SIZE;
}
#endif
if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
netif_wake_queue(dev);
tp->dirty_tx = dirty_tx;
if (csr5 & TxDied) {
if (tulip_debug > 2)
dev_warn(&dev->dev,
"The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n",
csr5, ioread32(ioaddr + CSR6),
tp->csr6);
tulip_restart_rxtx(tp);
}
spin_unlock(&tp->lock);
}
/* Log errors. */
if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
if (csr5 == 0xffffffff)
break;
if (csr5 & TxJabber)
dev->stats.tx_errors++;
if (csr5 & TxFIFOUnderflow) {
if ((tp->csr6 & 0xC000) != 0xC000)
tp->csr6 += 0x4000; /* Bump up the Tx threshold */
else
tp->csr6 |= 0x00200000; /* Store-n-forward. */
/* Restart the transmit process. */
tulip_restart_rxtx(tp);
iowrite32(0, ioaddr + CSR1);
}
if (csr5 & (RxDied | RxNoBuf)) {
if (tp->flags & COMET_MAC_ADDR) {
iowrite32(tp->mc_filter[0], ioaddr + 0xAC);
iowrite32(tp->mc_filter[1], ioaddr + 0xB0);
}
}
if (csr5 & RxDied) { /* Missed a Rx frame. */
dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
dev->stats.rx_errors++;
tulip_start_rxtx(tp);
}
/*
* NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
* call is ever done under the spinlock
*/
if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
if (tp->link_change)
(tp->link_change)(dev, csr5);
}
if (csr5 & SystemError) {
int error = (csr5 >> 23) & 7;
/* oops, we hit a PCI error. The code produced corresponds
* to the reason:
* 0 - parity error
* 1 - master abort
* 2 - target abort
* Note that on parity error, we should do a software reset
* of the chip to get it back into a sane state (according
* to the 21142/3 docs that is).
* -- rmk
*/
dev_err(&dev->dev,
"(%lu) System Error occurred (%d)\n",
tp->nir, error);
}
/* Clear all error sources, included undocumented ones! */
iowrite32(0x0800f7ba, ioaddr + CSR5);
oi++;
}
if (csr5 & TimerInt) {
if (tulip_debug > 2)
dev_err(&dev->dev,
"Re-enabling interrupts, %08x\n",
csr5);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tp->ttimer = 0;
oi++;
}
if (tx > maxtx || rx > maxrx || oi > maxoi) {
if (tulip_debug > 1)
dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
csr5, tp->nir, tx, rx, oi);
/* Acknowledge all interrupt sources. */
iowrite32(0x8001ffff, ioaddr + CSR5);
if (tp->flags & HAS_INTR_MITIGATION) {
/* Josip Loncaric at ICASE did extensive experimentation
to develop a good interrupt mitigation setting.*/
iowrite32(0x8b240000, ioaddr + CSR11);
} else if (tp->chip_id == LC82C168) {
/* the LC82C168 doesn't have a hw timer.*/
iowrite32(0x00, ioaddr + CSR7);
mod_timer(&tp->timer, RUN_AT(HZ/50));
} else {
/* Mask all interrupting sources, set timer to
re-enable. */
iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
iowrite32(0x0012, ioaddr + CSR11);
}
break;
}
work_count--;
if (work_count == 0)
break;
csr5 = ioread32(ioaddr + CSR5);
#ifdef CONFIG_TULIP_NAPI
if (rxd)
csr5 &= ~RxPollInt;
} while ((csr5 & (TxNoBuf |
TxDied |
TxIntr |
TimerInt |
/* Abnormal intr. */
RxDied |
TxFIFOUnderflow |
TxJabber |
TPLnkFail |
SystemError )) != 0);
#else
} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
tulip_refill_rx(dev);
/* check if the card is in suspend mode */
entry = tp->dirty_rx % RX_RING_SIZE;
if (tp->rx_buffers[entry].skb == NULL) {
if (tulip_debug > 1)
dev_warn(&dev->dev,
"in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n",
tp->nir, tp->cur_rx, tp->ttimer, rx);
if (tp->chip_id == LC82C168) {
iowrite32(0x00, ioaddr + CSR7);
mod_timer(&tp->timer, RUN_AT(HZ/50));
} else {
if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
if (tulip_debug > 1)
dev_warn(&dev->dev,
"in rx suspend mode: (%lu) set timer\n",
tp->nir);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
ioaddr + CSR7);
iowrite32(TimerInt, ioaddr + CSR5);
iowrite32(12, ioaddr + CSR11);
tp->ttimer = 1;
}
}
}
#endif /* CONFIG_TULIP_NAPI */
if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
}
if (tulip_debug > 4)
printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
dev->name, ioread32(ioaddr + CSR5));
return IRQ_HANDLED;
}
Reference in New Issue View Git Blame Copy Permalink