linux/arch/arc/kernel/intc-compact.c

175 lines
4.8 KiB
C

/*
* Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include <asm/irq.h>
#define NR_CPU_IRQS 32 /* number of irq lines coming in */
#define TIMER0_IRQ 3 /* Fixed by ISA */
/*
* Early Hardware specific Interrupt setup
* -Platform independent, needed for each CPU (not foldable into init_IRQ)
* -Called very early (start_kernel -> setup_arch -> setup_processor)
*
* what it does ?
* -Optionally, setup the High priority Interrupts as Level 2 IRQs
*/
void arc_init_IRQ(void)
{
unsigned int level_mask = 0, i;
/* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
/*
* Write to register, even if no LV2 IRQs configured to reset it
* in case bootloader had mucked with it
*/
write_aux_reg(AUX_IRQ_LEV, level_mask);
if (level_mask)
pr_info("Level-2 interrupts bitset %x\n", level_mask);
/*
* Disable all IRQ lines so faulty external hardware won't
* trigger interrupt that kernel is not ready to handle.
*/
for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) {
unsigned int ienb;
ienb = read_aux_reg(AUX_IENABLE);
ienb &= ~(1 << i);
write_aux_reg(AUX_IENABLE, ienb);
}
}
/*
* ARC700 core includes a simple on-chip intc supporting
* -per IRQ enable/disable
* -2 levels of interrupts (high/low)
* -all interrupts being level triggered
*
* To reduce platform code, we assume all IRQs directly hooked-up into intc.
* Platforms with external intc, hence cascaded IRQs, are free to over-ride
* below, per IRQ.
*/
static void arc_irq_mask(struct irq_data *data)
{
unsigned int ienb;
ienb = read_aux_reg(AUX_IENABLE);
ienb &= ~(1 << data->hwirq);
write_aux_reg(AUX_IENABLE, ienb);
}
static void arc_irq_unmask(struct irq_data *data)
{
unsigned int ienb;
ienb = read_aux_reg(AUX_IENABLE);
ienb |= (1 << data->hwirq);
write_aux_reg(AUX_IENABLE, ienb);
}
static struct irq_chip onchip_intc = {
.name = "ARC In-core Intc",
.irq_mask = arc_irq_mask,
.irq_unmask = arc_irq_unmask,
};
static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
switch (hw) {
case TIMER0_IRQ:
irq_set_percpu_devid(irq);
irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
break;
default:
irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
}
return 0;
}
static const struct irq_domain_ops arc_intc_domain_ops = {
.xlate = irq_domain_xlate_onecell,
.map = arc_intc_domain_map,
};
static int __init
init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
{
struct irq_domain *root_domain;
if (parent)
panic("DeviceTree incore intc not a root irq controller\n");
root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
&arc_intc_domain_ops, NULL);
if (!root_domain)
panic("root irq domain not avail\n");
/*
* Needed for primary domain lookup to succeed
* This is a primary irqchip, and can never have a parent
*/
irq_set_default_host(root_domain);
return 0;
}
IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
/*
* arch_local_irq_enable - Enable interrupts.
*
* 1. Explicitly called to re-enable interrupts
* 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
* which maybe in hard ISR itself
*
* Semantics of this function change depending on where it is called from:
*
* -If called from hard-ISR, it must not invert interrupt priorities
* e.g. suppose TIMER is high priority (Level 2) IRQ
* Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
* Here local_irq_enable( ) shd not re-enable lower priority interrupts
* -If called from soft-ISR, it must re-enable all interrupts
* soft ISR are low prioity jobs which can be very slow, thus all IRQs
* must be enabled while they run.
* Now hardware context wise we may still be in L2 ISR (not done rtie)
* still we must re-enable both L1 and L2 IRQs
* Another twist is prev scenario with flow being
* L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR
* here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
* over-written (this is deficiency in ARC700 Interrupt mechanism)
*/
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */
void arch_local_irq_enable(void)
{
unsigned long flags = arch_local_save_flags();
if (flags & STATUS_A2_MASK)
flags |= STATUS_E2_MASK;
else if (flags & STATUS_A1_MASK)
flags |= STATUS_E1_MASK;
arch_local_irq_restore(flags);
}
EXPORT_SYMBOL(arch_local_irq_enable);
#endif