linux/include/media/v4l2-mediabus.h

179 lines
6.1 KiB
C

/*
* Media Bus API header
*
* Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef V4L2_MEDIABUS_H
#define V4L2_MEDIABUS_H
#include <linux/v4l2-mediabus.h>
#include <linux/bitops.h>
/* Parallel flags */
/*
* Can the client run in master or in slave mode. By "Master mode" an operation
* mode is meant, when the client (e.g., a camera sensor) is producing
* horizontal and vertical synchronisation. In "Slave mode" the host is
* providing these signals to the slave.
*/
#define V4L2_MBUS_MASTER BIT(0)
#define V4L2_MBUS_SLAVE BIT(1)
/*
* Signal polarity flags
* Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
* V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
* configuration of hardware that uses [HV]REF signals
*/
#define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2)
#define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3)
#define V4L2_MBUS_VSYNC_ACTIVE_HIGH BIT(4)
#define V4L2_MBUS_VSYNC_ACTIVE_LOW BIT(5)
#define V4L2_MBUS_PCLK_SAMPLE_RISING BIT(6)
#define V4L2_MBUS_PCLK_SAMPLE_FALLING BIT(7)
#define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(8)
#define V4L2_MBUS_DATA_ACTIVE_LOW BIT(9)
/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
#define V4L2_MBUS_FIELD_EVEN_HIGH BIT(10)
/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
#define V4L2_MBUS_FIELD_EVEN_LOW BIT(11)
/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(12)
#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(13)
/* Serial flags */
/* How many lanes the client can use */
#define V4L2_MBUS_CSI2_1_LANE BIT(0)
#define V4L2_MBUS_CSI2_2_LANE BIT(1)
#define V4L2_MBUS_CSI2_3_LANE BIT(2)
#define V4L2_MBUS_CSI2_4_LANE BIT(3)
/* On which channels it can send video data */
#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4)
#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5)
#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6)
#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7)
/* Does it support only continuous or also non-continuous clock mode */
#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8)
#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9)
#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
/**
* enum v4l2_mbus_type - media bus type
* @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync
* @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can
* also be used for BT.1120
* @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface
* @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2)
* @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
*/
enum v4l2_mbus_type {
V4L2_MBUS_PARALLEL,
V4L2_MBUS_BT656,
V4L2_MBUS_CSI1,
V4L2_MBUS_CCP2,
V4L2_MBUS_CSI2,
};
/**
* struct v4l2_mbus_config - media bus configuration
* @type: in: interface type
* @flags: in / out: configuration flags, depending on @type
*/
struct v4l2_mbus_config {
enum v4l2_mbus_type type;
unsigned int flags;
};
/**
* v4l2_fill_pix_format - Ancillary routine that fills a &struct
* v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
*
* @pix_fmt: pointer to &struct v4l2_pix_format to be filled
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
*/
static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
const struct v4l2_mbus_framefmt *mbus_fmt)
{
pix_fmt->width = mbus_fmt->width;
pix_fmt->height = mbus_fmt->height;
pix_fmt->field = mbus_fmt->field;
pix_fmt->colorspace = mbus_fmt->colorspace;
pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
pix_fmt->quantization = mbus_fmt->quantization;
pix_fmt->xfer_func = mbus_fmt->xfer_func;
}
/**
* v4l2_fill_pix_format - Ancillary routine that fills a &struct
* v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
* data format code.
*
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
* @pix_fmt: pointer to &struct v4l2_pix_format to be used as model
* @code: data format code (from &enum v4l2_mbus_pixelcode)
*/
static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
const struct v4l2_pix_format *pix_fmt,
u32 code)
{
mbus_fmt->width = pix_fmt->width;
mbus_fmt->height = pix_fmt->height;
mbus_fmt->field = pix_fmt->field;
mbus_fmt->colorspace = pix_fmt->colorspace;
mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
mbus_fmt->quantization = pix_fmt->quantization;
mbus_fmt->xfer_func = pix_fmt->xfer_func;
mbus_fmt->code = code;
}
/**
* v4l2_fill_pix_format - Ancillary routine that fills a &struct
* v4l2_pix_format_mplane fields from a media bus structure.
*
* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
*/
static inline void v4l2_fill_pix_format_mplane(
struct v4l2_pix_format_mplane *pix_mp_fmt,
const struct v4l2_mbus_framefmt *mbus_fmt)
{
pix_mp_fmt->width = mbus_fmt->width;
pix_mp_fmt->height = mbus_fmt->height;
pix_mp_fmt->field = mbus_fmt->field;
pix_mp_fmt->colorspace = mbus_fmt->colorspace;
pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
pix_mp_fmt->quantization = mbus_fmt->quantization;
pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
}
/**
* v4l2_fill_pix_format - Ancillary routine that fills a &struct
* v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
*
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be used as model
*/
static inline void v4l2_fill_mbus_format_mplane(
struct v4l2_mbus_framefmt *mbus_fmt,
const struct v4l2_pix_format_mplane *pix_mp_fmt)
{
mbus_fmt->width = pix_mp_fmt->width;
mbus_fmt->height = pix_mp_fmt->height;
mbus_fmt->field = pix_mp_fmt->field;
mbus_fmt->colorspace = pix_mp_fmt->colorspace;
mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
mbus_fmt->quantization = pix_mp_fmt->quantization;
mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
}
#endif