OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
72809cbf67
linux/drivers/scsi/53c700.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

529 lines
16 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/* -*- mode: c; c-basic-offset: 8 -*- */
/* Driver for 53c700 and 53c700-66 chips from NCR and Symbios
*
* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
*/
#ifndef _53C700_H
#define _53C700_H
#include <linux/interrupt.h>
#include <asm/io.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
/* Turn on for general debugging---too verbose for normal use */
#undef NCR_700_DEBUG
/* Debug the tag queues, checking hash queue allocation and deallocation
* and search for duplicate tags */
#undef NCR_700_TAG_DEBUG
#ifdef NCR_700_DEBUG
#define DEBUG(x) printk x
#define DDEBUG(prefix, sdev, fmt, a...) \
sdev_printk(prefix, sdev, fmt, ##a)
#define CDEBUG(prefix, scmd, fmt, a...) \
scmd_printk(prefix, scmd, fmt, ##a)
#else
#define DEBUG(x) do {} while (0)
#define DDEBUG(prefix, scmd, fmt, a...) do {} while (0)
#define CDEBUG(prefix, scmd, fmt, a...) do {} while (0)
#endif
/* The number of available command slots */
#define NCR_700_COMMAND_SLOTS_PER_HOST 64
/* The maximum number of Scatter Gathers we allow */
#define NCR_700_SG_SEGMENTS 32
/* The maximum number of luns (make this of the form 2^n) */
#define NCR_700_MAX_LUNS 32
#define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1)
/* Maximum number of tags the driver ever allows per device */
#define NCR_700_MAX_TAGS 16
/* Tag depth the driver starts out with (can be altered in sysfs) */
#define NCR_700_DEFAULT_TAGS 4
/* This is the default number of commands per LUN in the untagged case.
* two is a good value because it means we can have one command active and
* one command fully prepared and waiting
*/
#define NCR_700_CMD_PER_LUN 2
/* magic byte identifying an internally generated REQUEST_SENSE command */
#define NCR_700_INTERNAL_SENSE_MAGIC 0x42
struct NCR_700_Host_Parameters;
/* These are the externally used routines */
struct Scsi_Host *NCR_700_detect(struct scsi_host_template *,
struct NCR_700_Host_Parameters *, struct device *);
int NCR_700_release(struct Scsi_Host *host);
irqreturn_t NCR_700_intr(int, void *);
enum NCR_700_Host_State {
NCR_700_HOST_BUSY,
NCR_700_HOST_FREE,
};
struct NCR_700_SG_List {
/* The following is a script fragment to move the buffer onto the
* bus and then link the next fragment or return */
#define SCRIPT_MOVE_DATA_IN 0x09000000
#define SCRIPT_MOVE_DATA_OUT 0x08000000
__u32 ins;
__u32 pAddr;
#define SCRIPT_NOP 0x80000000
#define SCRIPT_RETURN 0x90080000
};
struct NCR_700_Device_Parameters {
/* space for creating a request sense command. Really, except
* for the annoying SCSI-2 requirement for LUN information in
* cmnd[1], this could be in static storage */
unsigned char cmnd[MAX_COMMAND_SIZE];
__u8 depth;
struct scsi_cmnd *current_cmnd; /* currently active command */
};
/* The SYNC negotiation sequence looks like:
*
* If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
* initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
* If we get an SDTR reply, work out the SXFER parameters, squirrel
* them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set
* DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel
*
*
* 0:7 SXFER_REG negotiated value for this device
* 8:15 Current queue depth
* 16 negotiated SYNC flag
* 17 begin SYNC negotiation flag
* 18 device supports tag queueing */
#define NCR_700_DEV_NEGOTIATED_SYNC (1<<16)
#define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17)
#define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp)
{
struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
return hostdata->cmnd;
}
static inline void
NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
{
struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
hostdata->depth = depth;
}
static inline __u8
NCR_700_get_depth(struct scsi_device *SDp)
{
struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
return hostdata->depth;
}
static inline int
NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)
{
return (spi_flags(SDp->sdev_target) & flag) == flag;
}
static inline int
NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag)
{
return (spi_flags(SDp->sdev_target) & flag) == 0;
}
static inline void
NCR_700_set_flag(struct scsi_device *SDp, __u32 flag)
{
spi_flags(SDp->sdev_target) |= flag;
}
static inline void
NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag)
{
spi_flags(SDp->sdev_target) &= ~flag;
}
enum NCR_700_tag_neg_state {
NCR_700_START_TAG_NEGOTIATION = 0,
NCR_700_DURING_TAG_NEGOTIATION = 1,
NCR_700_FINISHED_TAG_NEGOTIATION = 2,
};
static inline enum NCR_700_tag_neg_state
NCR_700_get_tag_neg_state(struct scsi_device *SDp)
{
return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3);
}
static inline void
NCR_700_set_tag_neg_state(struct scsi_device *SDp,
enum NCR_700_tag_neg_state state)
{
/* clear the slot */
spi_flags(SDp->sdev_target) &= ~(0x3 << 20);
spi_flags(SDp->sdev_target) |= ((__u32)state) << 20;
}
struct NCR_700_command_slot {
struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1];
struct NCR_700_SG_List *pSG;
#define NCR_700_SLOT_MASK 0xFC
#define NCR_700_SLOT_MAGIC 0xb8
#define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */
#define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */
#define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */
__u8 state;
#define NCR_700_FLAG_AUTOSENSE 0x01
__u8 flags;
__u8 pad1[2]; /* Needed for m68k where min alignment is 2 bytes */
int tag;
__u32 resume_offset;
struct scsi_cmnd *cmnd;
/* The pci_mapped address of the actual command in cmnd */
dma_addr_t pCmd;
__u32 temp;
/* if this command is a pci_single mapping, holds the dma address
* for later unmapping in the done routine */
dma_addr_t dma_handle;
/* historical remnant, now used to link free commands */
struct NCR_700_command_slot *ITL_forw;
};
struct NCR_700_Host_Parameters {
/* These must be filled in by the calling driver */
int clock; /* board clock speed in MHz */
void __iomem *base; /* the base for the port (copied to host) */
struct device *dev;
__u32 dmode_extra; /* adjustable bus settings */
__u32 dcntl_extra; /* adjustable bus settings */
__u32 ctest7_extra; /* adjustable bus settings */
__u32 differential:1; /* if we are differential */
#ifdef CONFIG_53C700_LE_ON_BE
/* This option is for HP only. Set it if your chip is wired for
* little endian on this platform (which is big endian) */
__u32 force_le_on_be:1;
#endif
__u32 chip710:1; /* set if really a 710 not 700 */
__u32 burst_length:4; /* set to 0 to disable 710 bursting */
/* NOTHING BELOW HERE NEEDS ALTERING */
__u32 fast:1; /* if we can alter the SCSI bus clock
speed (so can negiotiate sync) */
int sync_clock; /* The speed of the SYNC core */
__u32 *script; /* pointer to script location */
__u32 pScript; /* physical mem addr of script */
enum NCR_700_Host_State state; /* protected by state lock */
struct scsi_cmnd *cmd;
/* Note: pScript contains the single consistent block of
* memory. All the msgin, msgout and status are allocated in
* this memory too (at separate cache lines). TOTAL_MEM_SIZE
* represents the total size of this area */
#define MSG_ARRAY_SIZE 8
#define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT)))
__u8 *msgout;
#define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
__u8 *msgin;
#define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
__u8 *status;
#define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
struct NCR_700_command_slot *slots;
#define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST))
int saved_slot_position;
int command_slot_count; /* protected by state lock */
__u8 tag_negotiated;
__u8 rev;
__u8 reselection_id;
__u8 min_period;
/* Free list, singly linked by ITL_forw elements */
struct NCR_700_command_slot *free_list;
/* Completion for waited for ops, like reset, abort or
* device reset.
*
* NOTE: relies on single threading in the error handler to
* have only one outstanding at once */
struct completion *eh_complete;
};
/*
* 53C700 Register Interface - the offset from the Selected base
* I/O address */
#ifdef CONFIG_53C700_LE_ON_BE
#define bE (hostdata->force_le_on_be ? 0 : 3)
#define bSWAP (hostdata->force_le_on_be)
#define bEBus (!hostdata->force_le_on_be)
#elif defined(__BIG_ENDIAN)
#define bE 3
#define bSWAP 0
#elif defined(__LITTLE_ENDIAN)
#define bE 0
#define bSWAP 0
#else
#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
#endif
#ifndef bEBus
#ifdef CONFIG_53C700_BE_BUS
#define bEBus 1
#else
#define bEBus 0
#endif
#endif
#define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x))
#define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x))
/* NOTE: These registers are in the LE register space only, the required byte
* swapping is done by the NCR_700_{read|write}[b] functions */
#define SCNTL0_REG 0x00
#define FULL_ARBITRATION 0xc0
#define PARITY 0x08
#define ENABLE_PARITY 0x04
#define AUTO_ATN 0x02
#define SCNTL1_REG 0x01
#define SLOW_BUS 0x80
#define ENABLE_SELECT 0x20
#define ASSERT_RST 0x08
#define ASSERT_EVEN_PARITY 0x04
#define SDID_REG 0x02
#define SIEN_REG 0x03
#define PHASE_MM_INT 0x80
#define FUNC_COMP_INT 0x40
#define SEL_TIMEOUT_INT 0x20
#define SELECT_INT 0x10
#define GROSS_ERR_INT 0x08
#define UX_DISC_INT 0x04
#define RST_INT 0x02
#define PAR_ERR_INT 0x01
#define SCID_REG 0x04
#define SXFER_REG 0x05
#define ASYNC_OPERATION 0x00
#define SODL_REG 0x06
#define SOCL_REG 0x07
#define SFBR_REG 0x08
#define SIDL_REG 0x09
#define SBDL_REG 0x0A
#define SBCL_REG 0x0B
/* read bits */
#define SBCL_IO 0x01
/*write bits */
#define SYNC_DIV_AS_ASYNC 0x00
#define SYNC_DIV_1_0 0x01
#define SYNC_DIV_1_5 0x02
#define SYNC_DIV_2_0 0x03
#define DSTAT_REG 0x0C
#define ILGL_INST_DETECTED 0x01
#define WATCH_DOG_INTERRUPT 0x02
#define SCRIPT_INT_RECEIVED 0x04
#define ABORTED 0x10
#define SSTAT0_REG 0x0D
#define PARITY_ERROR 0x01
#define SCSI_RESET_DETECTED 0x02
#define UNEXPECTED_DISCONNECT 0x04
#define SCSI_GROSS_ERROR 0x08
#define SELECTED 0x10
#define SELECTION_TIMEOUT 0x20
#define FUNCTION_COMPLETE 0x40
#define PHASE_MISMATCH 0x80
#define SSTAT1_REG 0x0E
#define SIDL_REG_FULL 0x80
#define SODR_REG_FULL 0x40
#define SODL_REG_FULL 0x20
#define SSTAT2_REG 0x0F
#define CTEST0_REG 0x14
#define BTB_TIMER_DISABLE 0x40
#define CTEST1_REG 0x15
#define CTEST2_REG 0x16
#define CTEST3_REG 0x17
#define CTEST4_REG 0x18
#define DISABLE_FIFO 0x00
#define SLBE 0x10
#define SFWR 0x08
#define BYTE_LANE0 0x04
#define BYTE_LANE1 0x05
#define BYTE_LANE2 0x06
#define BYTE_LANE3 0x07
#define SCSI_ZMODE 0x20
#define ZMODE 0x40
#define CTEST5_REG 0x19
#define MASTER_CONTROL 0x10
#define DMA_DIRECTION 0x08
#define CTEST7_REG 0x1B
#define BURST_DISABLE 0x80 /* 710 only */
#define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */
#define DFP 0x08
#define EVP 0x04
#define CTEST7_TT1 0x02
#define DIFF 0x01
#define CTEST6_REG 0x1A
#define TEMP_REG 0x1C
#define DFIFO_REG 0x20
#define FLUSH_DMA_FIFO 0x80
#define CLR_FIFO 0x40
#define ISTAT_REG 0x21
#define ABORT_OPERATION 0x80
#define SOFTWARE_RESET_710 0x40
#define DMA_INT_PENDING 0x01
#define SCSI_INT_PENDING 0x02
#define CONNECTED 0x08
#define CTEST8_REG 0x22
#define LAST_DIS_ENBL 0x01
#define SHORTEN_FILTERING 0x04
#define ENABLE_ACTIVE_NEGATION 0x10
#define GENERATE_RECEIVE_PARITY 0x20
#define CLR_FIFO_710 0x04
#define FLUSH_DMA_FIFO_710 0x08
#define CTEST9_REG 0x23
#define DBC_REG 0x24
#define DCMD_REG 0x27
#define DNAD_REG 0x28
#define DIEN_REG 0x39
#define BUS_FAULT 0x20
#define ABORT_INT 0x10
#define INT_INST_INT 0x04
#define WD_INT 0x02
#define ILGL_INST_INT 0x01
#define DCNTL_REG 0x3B
#define SOFTWARE_RESET 0x01
#define COMPAT_700_MODE 0x01
#define SCRPTS_16BITS 0x20
#define EA_710 0x20
#define ASYNC_DIV_2_0 0x00
#define ASYNC_DIV_1_5 0x40
#define ASYNC_DIV_1_0 0x80
#define ASYNC_DIV_3_0 0xc0
#define DMODE_710_REG 0x38
#define DMODE_700_REG 0x34
#define BURST_LENGTH_1 0x00
#define BURST_LENGTH_2 0x40
#define BURST_LENGTH_4 0x80
#define BURST_LENGTH_8 0xC0
#define DMODE_FC1 0x10
#define DMODE_FC2 0x20
#define BW16 32
#define MODE_286 16
#define IO_XFER 8
#define FIXED_ADDR 4
#define DSP_REG 0x2C
#define DSPS_REG 0x30
/* Parameters to begin SDTR negotiations. Empirically, I find that
* the 53c700-66 cannot handle an offset >8, so don't change this */
#define NCR_700_MAX_OFFSET 8
/* Was hoping the max offset would be greater for the 710, but
* empirically it seems to be 8 also */
#define NCR_710_MAX_OFFSET 8
#define NCR_700_MIN_XFERP 1
#define NCR_710_MIN_XFERP 0
#define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */
#define script_patch_32(dev, script, symbol, value) \
{ \
int i; \
dma_addr_t da = value; \
for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
__u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + da; \
(script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
DEBUG((" script, patching %s at %d to %pad\n", \
#symbol, A_##symbol##_used[i], &da)); \
} \
}
#define script_patch_32_abs(dev, script, symbol, value) \
{ \
int i; \
dma_addr_t da = value; \
for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
(script)[A_##symbol##_used[i]] = bS_to_host(da); \
dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
DEBUG((" script, patching %s at %d to %pad\n", \
#symbol, A_##symbol##_used[i], &da)); \
} \
}
/* Used for patching the SCSI ID in the SELECT instruction */
#define script_patch_ID(dev, script, symbol, value) \
{ \
int i; \
for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
__u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
val &= 0xff00ffff; \
val |= ((value) & 0xff) << 16; \
(script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
DEBUG((" script, patching ID field %s at %d to 0x%x\n", \
#symbol, A_##symbol##_used[i], val)); \
} \
}
#define script_patch_16(dev, script, symbol, value) \
{ \
int i; \
for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
__u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
val &= 0xffff0000; \
val |= ((value) & 0xffff); \
(script)[A_##symbol##_used[i]] = bS_to_host(val); \
dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
DEBUG((" script, patching short field %s at %d to 0x%x\n", \
#symbol, A_##symbol##_used[i], val)); \
} \
}
static inline __u8
NCR_700_readb(struct Scsi_Host *host, __u32 reg)
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
return ioread8(hostdata->base + (reg^bE));
}
static inline __u32
NCR_700_readl(struct Scsi_Host *host, __u32 reg)
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
__u32 value = bEBus ? ioread32be(hostdata->base + reg) :
ioread32(hostdata->base + reg);
#if 1
/* sanity check the register */
BUG_ON((reg & 0x3) != 0);
#endif
return value;
}
static inline void
NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
iowrite8(value, hostdata->base + (reg^bE));
}
static inline void
NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
#if 1
/* sanity check the register */
BUG_ON((reg & 0x3) != 0);
#endif
bEBus ? iowrite32be(value, hostdata->base + reg):
iowrite32(value, hostdata->base + reg);
}
#endif
Reference in New Issue View Git Blame Copy Permalink