OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7287fb9114
linux/drivers/regulator/max8998.c
MyungJoo Ham 735a3d9efd regulator: Support MAX8998/LP3974 DVS-GPIO 
The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and
BUCK2-DVS2 modes. This patch adds such modes and an option to block
setting buck1/2 voltages out of the preset values.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:16 +01:00

916 lines
23 KiB
C
Raw Blame History

/*
* max8998.c - Voltage regulator driver for the Maxim 8998
*
* Copyright (C) 2009-2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
* Marek Szyprowski <m.szyprowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/max8998.h>
#include <linux/mfd/max8998-private.h>
struct max8998_data {
struct device *dev;
struct max8998_dev *iodev;
int num_regulators;
struct regulator_dev **rdev;
u8 buck1_vol[4]; /* voltages for selection */
u8 buck2_vol[2];
unsigned int buck1_idx; /* index to last changed voltage */
/* value in a set */
unsigned int buck2_idx;
};
struct voltage_map_desc {
int min;
int max;
int step;
};
/* Voltage maps */
static const struct voltage_map_desc ldo23_voltage_map_desc = {
.min = 800, .step = 50, .max = 1300,
};
static const struct voltage_map_desc ldo456711_voltage_map_desc = {
.min = 1600, .step = 100, .max = 3600,
};
static const struct voltage_map_desc ldo8_voltage_map_desc = {
.min = 3000, .step = 100, .max = 3600,
};
static const struct voltage_map_desc ldo9_voltage_map_desc = {
.min = 2800, .step = 100, .max = 3100,
};
static const struct voltage_map_desc ldo10_voltage_map_desc = {
.min = 950, .step = 50, .max = 1300,
};
static const struct voltage_map_desc ldo1213_voltage_map_desc = {
.min = 800, .step = 100, .max = 3300,
};
static const struct voltage_map_desc ldo1415_voltage_map_desc = {
.min = 1200, .step = 100, .max = 3300,
};
static const struct voltage_map_desc ldo1617_voltage_map_desc = {
.min = 1600, .step = 100, .max = 3600,
};
static const struct voltage_map_desc buck12_voltage_map_desc = {
.min = 750, .step = 25, .max = 1525,
};
static const struct voltage_map_desc buck3_voltage_map_desc = {
.min = 1600, .step = 100, .max = 3600,
};
static const struct voltage_map_desc buck4_voltage_map_desc = {
.min = 800, .step = 100, .max = 2300,
};
static const struct voltage_map_desc *ldo_voltage_map[] = {
NULL,
NULL,
&ldo23_voltage_map_desc, /* LDO2 */
&ldo23_voltage_map_desc, /* LDO3 */
&ldo456711_voltage_map_desc, /* LDO4 */
&ldo456711_voltage_map_desc, /* LDO5 */
&ldo456711_voltage_map_desc, /* LDO6 */
&ldo456711_voltage_map_desc, /* LDO7 */
&ldo8_voltage_map_desc, /* LDO8 */
&ldo9_voltage_map_desc, /* LDO9 */
&ldo10_voltage_map_desc, /* LDO10 */
&ldo456711_voltage_map_desc, /* LDO11 */
&ldo1213_voltage_map_desc, /* LDO12 */
&ldo1213_voltage_map_desc, /* LDO13 */
&ldo1415_voltage_map_desc, /* LDO14 */
&ldo1415_voltage_map_desc, /* LDO15 */
&ldo1617_voltage_map_desc, /* LDO16 */
&ldo1617_voltage_map_desc, /* LDO17 */
&buck12_voltage_map_desc, /* BUCK1 */
&buck12_voltage_map_desc, /* BUCK2 */
&buck3_voltage_map_desc, /* BUCK3 */
&buck4_voltage_map_desc, /* BUCK4 */
};
static inline int max8998_get_ldo(struct regulator_dev *rdev)
{
return rdev_get_id(rdev);
}
static int max8998_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
const struct voltage_map_desc *desc;
int ldo = max8998_get_ldo(rdev);
int val;
if (ldo >= ARRAY_SIZE(ldo_voltage_map))
return -EINVAL;
desc = ldo_voltage_map[ldo];
if (desc == NULL)
return -EINVAL;
val = desc->min + desc->step * selector;
if (val > desc->max)
return -EINVAL;
return val * 1000;
}
static int max8998_get_enable_register(struct regulator_dev *rdev,
int *reg, int *shift)
{
int ldo = max8998_get_ldo(rdev);
switch (ldo) {
case MAX8998_LDO2 ... MAX8998_LDO5:
*reg = MAX8998_REG_ONOFF1;
*shift = 3 - (ldo - MAX8998_LDO2);
break;
case MAX8998_LDO6 ... MAX8998_LDO13:
*reg = MAX8998_REG_ONOFF2;
*shift = 7 - (ldo - MAX8998_LDO6);
break;
case MAX8998_LDO14 ... MAX8998_LDO17:
*reg = MAX8998_REG_ONOFF3;
*shift = 7 - (ldo - MAX8998_LDO14);
break;
case MAX8998_BUCK1 ... MAX8998_BUCK4:
*reg = MAX8998_REG_ONOFF1;
*shift = 7 - (ldo - MAX8998_BUCK1);
break;
case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
*reg = MAX8998_REG_ONOFF4;
*shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
break;
case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
*reg = MAX8998_REG_CHGR2;
*shift = 7 - (ldo - MAX8998_ESAFEOUT1);
break;
default:
return -EINVAL;
}
return 0;
}
static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
int ret, reg, shift = 8;
u8 val;
ret = max8998_get_enable_register(rdev, &reg, &shift);
if (ret)
return ret;
ret = max8998_read_reg(i2c, reg, &val);
if (ret)
return ret;
return val & (1 << shift);
}
static int max8998_ldo_enable(struct regulator_dev *rdev)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
int reg, shift = 8, ret;
ret = max8998_get_enable_register(rdev, &reg, &shift);
if (ret)
return ret;
return max8998_update_reg(i2c, reg, 1<<shift, 1<<shift);
}
static int max8998_ldo_disable(struct regulator_dev *rdev)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
int reg, shift = 8, ret;
ret = max8998_get_enable_register(rdev, &reg, &shift);
if (ret)
return ret;
return max8998_update_reg(i2c, reg, 0, 1<<shift);
}
static int max8998_get_voltage_register(struct regulator_dev *rdev,
int *_reg, int *_shift, int *_mask)
{
int ldo = max8998_get_ldo(rdev);
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
int reg, shift = 0, mask = 0xff;
switch (ldo) {
case MAX8998_LDO2 ... MAX8998_LDO3:
reg = MAX8998_REG_LDO2_LDO3;
mask = 0xf;
if (ldo == MAX8998_LDO2)
shift = 4;
else
shift = 0;
break;
case MAX8998_LDO4 ... MAX8998_LDO7:
reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
break;
case MAX8998_LDO8 ... MAX8998_LDO9:
reg = MAX8998_REG_LDO8_LDO9;
mask = 0xf;
if (ldo == MAX8998_LDO8)
shift = 4;
else
shift = 0;
break;
case MAX8998_LDO10 ... MAX8998_LDO11:
reg = MAX8998_REG_LDO10_LDO11;
if (ldo == MAX8998_LDO10) {
shift = 5;
mask = 0x7;
} else {
shift = 0;
mask = 0x1f;
}
break;
case MAX8998_LDO12 ... MAX8998_LDO17:
reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
break;
case MAX8998_BUCK1:
reg = MAX8998_REG_BUCK1_VOLTAGE1 + max8998->buck1_idx;
break;
case MAX8998_BUCK2:
reg = MAX8998_REG_BUCK2_VOLTAGE1 + max8998->buck2_idx;
break;
case MAX8998_BUCK3:
reg = MAX8998_REG_BUCK3;
break;
case MAX8998_BUCK4:
reg = MAX8998_REG_BUCK4;
break;
default:
return -EINVAL;
}
*_reg = reg;
*_shift = shift;
*_mask = mask;
return 0;
}
static int max8998_get_voltage(struct regulator_dev *rdev)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
int reg, shift = 0, mask, ret;
u8 val;
ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
ret = max8998_read_reg(i2c, reg, &val);
if (ret)
return ret;
val >>= shift;
val &= mask;
return max8998_list_voltage(rdev, val);
}
static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int ldo = max8998_get_ldo(rdev);
int reg, shift = 0, mask, ret;
int i = 0;
if (ldo >= ARRAY_SIZE(ldo_voltage_map))
return -EINVAL;
desc = ldo_voltage_map[ldo];
if (desc == NULL)
return -EINVAL;
if (max_vol < desc->min || min_vol > desc->max)
return -EINVAL;
while (desc->min + desc->step*i < min_vol &&
desc->min + desc->step*i < desc->max)
i++;
if (desc->min + desc->step*i > max_vol)
return -EINVAL;
*selector = i;
ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
return ret;
}
static inline void buck1_gpio_set(int gpio1, int gpio2, int v)
{
gpio_set_value(gpio1, v & 0x1);
gpio_set_value(gpio2, (v >> 1) & 0x1);
}
static inline void buck2_gpio_set(int gpio, int v)
{
gpio_set_value(gpio, v & 0x1);
}
static int max8998_set_voltage_buck(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct max8998_platform_data *pdata =
dev_get_platdata(max8998->iodev->dev);
struct i2c_client *i2c = max8998->iodev->i2c;
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int buck = max8998_get_ldo(rdev);
int reg, shift = 0, mask, ret;
int difference = 0, i = 0, j = 0, previous_vol = 0;
u8 val = 0;
static u8 buck1_last_val;
if (buck >= ARRAY_SIZE(ldo_voltage_map))
return -EINVAL;
desc = ldo_voltage_map[buck];
if (desc == NULL)
return -EINVAL;
if (max_vol < desc->min || min_vol > desc->max)
return -EINVAL;
while (desc->min + desc->step*i < min_vol &&
desc->min + desc->step*i < desc->max)
i++;
if (desc->min + desc->step*i > max_vol)
return -EINVAL;
*selector = i;
ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
previous_vol = max8998_get_voltage(rdev);
/* Check if voltage needs to be changed */
/* if previous_voltage equal new voltage, return */
if (previous_vol == max8998_list_voltage(rdev, i)) {
dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
previous_vol, max8998_list_voltage(rdev, i));
return ret;
}
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
"BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\
buck1_vol3:%d, buck1_vol4:%d\n",
i, max8998->buck1_vol[0], max8998->buck1_vol[1],
max8998->buck1_vol[2], max8998->buck1_vol[3]);
if (gpio_is_valid(pdata->buck1_set1) &&
gpio_is_valid(pdata->buck1_set2)) {
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
if (max8998->buck1_vol[j] == i) {
max8998->buck1_idx = j;
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, j);
goto buck1_exit;
}
}
if (pdata->buck_voltage_lock)
return -EINVAL;
/* no predefine regulator found */
max8998->buck1_idx = (buck1_last_val % 2) + 2;
dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
max8998->buck1_idx);
max8998->buck1_vol[max8998->buck1_idx] = i;
ret = max8998_get_voltage_register(rdev, &reg,
&shift,
&mask);
ret = max8998_write_reg(i2c, reg, i);
buck1_gpio_set(pdata->buck1_set1,
pdata->buck1_set2, max8998->buck1_idx);
buck1_last_val++;
buck1_exit:
dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n",
i2c->name, gpio_get_value(pdata->buck1_set1),
gpio_get_value(pdata->buck1_set2));
break;
} else {
ret = max8998_write_reg(i2c, reg, i);
}
break;
case MAX8998_BUCK2:
dev_dbg(max8998->dev,
"BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n"
, i, max8998->buck2_vol[0], max8998->buck2_vol[1]);
if (gpio_is_valid(pdata->buck2_set3)) {
/* check if requested voltage */
/* value is already defined */
for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
if (max8998->buck2_vol[j] == i) {
max8998->buck2_idx = j;
buck2_gpio_set(pdata->buck2_set3, j);
goto buck2_exit;
}
}
if (pdata->buck_voltage_lock)
return -EINVAL;
max8998_get_voltage_register(rdev,
&reg, &shift, &mask);
ret = max8998_write_reg(i2c, reg, i);
max8998->buck2_vol[max8998->buck2_idx] = i;
buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
buck2_exit:
dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
gpio_get_value(pdata->buck2_set3));
} else {
ret = max8998_write_reg(i2c, reg, i);
}
break;
case MAX8998_BUCK3:
case MAX8998_BUCK4:
ret = max8998_update_reg(i2c, reg, i<<shift, mask<<shift);
break;
}
/* Voltage stabilization */
max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
/* lp3974 hasn't got ENRAMP bit - ramp is assumed as true */
/* MAX8998 has ENRAMP bit implemented, so test it*/
if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
return ret;
difference = desc->min + desc->step*i - previous_vol/1000;
if (difference > 0)
udelay(difference / ((val & 0x0f) + 1));
return ret;
}
static struct regulator_ops max8998_ldo_ops = {
.list_voltage = max8998_list_voltage,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage = max8998_get_voltage,
.set_voltage = max8998_set_voltage_ldo,
.set_suspend_enable = max8998_ldo_enable,
.set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_ops max8998_buck_ops = {
.list_voltage = max8998_list_voltage,
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.get_voltage = max8998_get_voltage,
.set_voltage = max8998_set_voltage_buck,
.set_suspend_enable = max8998_ldo_enable,
.set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_ops max8998_others_ops = {
.is_enabled = max8998_ldo_is_enabled,
.enable = max8998_ldo_enable,
.disable = max8998_ldo_disable,
.set_suspend_enable = max8998_ldo_enable,
.set_suspend_disable = max8998_ldo_disable,
};
static struct regulator_desc regulators[] = {
{
.name = "LDO2",
.id = MAX8998_LDO2,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO3",
.id = MAX8998_LDO3,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO4",
.id = MAX8998_LDO4,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO5",
.id = MAX8998_LDO5,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO6",
.id = MAX8998_LDO6,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO7",
.id = MAX8998_LDO7,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO8",
.id = MAX8998_LDO8,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO9",
.id = MAX8998_LDO9,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO10",
.id = MAX8998_LDO10,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO11",
.id = MAX8998_LDO11,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO12",
.id = MAX8998_LDO12,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO13",
.id = MAX8998_LDO13,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO14",
.id = MAX8998_LDO14,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO15",
.id = MAX8998_LDO15,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO16",
.id = MAX8998_LDO16,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "LDO17",
.id = MAX8998_LDO17,
.ops = &max8998_ldo_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "BUCK1",
.id = MAX8998_BUCK1,
.ops = &max8998_buck_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "BUCK2",
.id = MAX8998_BUCK2,
.ops = &max8998_buck_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "BUCK3",
.id = MAX8998_BUCK3,
.ops = &max8998_buck_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "BUCK4",
.id = MAX8998_BUCK4,
.ops = &max8998_buck_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "EN32KHz AP",
.id = MAX8998_EN32KHZ_AP,
.ops = &max8998_others_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "EN32KHz CP",
.id = MAX8998_EN32KHZ_CP,
.ops = &max8998_others_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "ENVICHG",
.id = MAX8998_ENVICHG,
.ops = &max8998_others_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "ESAFEOUT1",
.id = MAX8998_ESAFEOUT1,
.ops = &max8998_others_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}, {
.name = "ESAFEOUT2",
.id = MAX8998_ESAFEOUT2,
.ops = &max8998_others_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
}
};
static __devinit int max8998_pmic_probe(struct platform_device *pdev)
{
struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
struct regulator_dev **rdev;
struct max8998_data *max8998;
struct i2c_client *i2c;
int i, ret, size;
if (!pdata) {
dev_err(pdev->dev.parent, "No platform init data supplied\n");
return -ENODEV;
}
max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
if (!max8998)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * pdata->num_regulators;
max8998->rdev = kzalloc(size, GFP_KERNEL);
if (!max8998->rdev) {
kfree(max8998);
return -ENOMEM;
}
rdev = max8998->rdev;
max8998->dev = &pdev->dev;
max8998->iodev = iodev;
max8998->num_regulators = pdata->num_regulators;
platform_set_drvdata(pdev, max8998);
i2c = max8998->iodev->i2c;
max8998->buck1_idx = pdata->buck1_default_idx;
max8998->buck2_idx = pdata->buck2_default_idx;
/* NOTE: */
/* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */
/* will be displayed */
/* Check if MAX8998 voltage selection GPIOs are defined */
if (gpio_is_valid(pdata->buck1_set1) &&
gpio_is_valid(pdata->buck1_set2)) {
/* Check if SET1 is not equal to 0 */
if (!pdata->buck1_set1) {
printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set1);
return -EIO;
}
/* Check if SET2 is not equal to 0 */
if (!pdata->buck1_set2) {
printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck1_set2);
return -EIO;
}
gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
gpio_direction_output(pdata->buck1_set1,
max8998->buck1_idx & 0x1);
gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
gpio_direction_output(pdata->buck1_set2,
(max8998->buck1_idx >> 1) & 0x1);
/* Set predefined value for BUCK1 register 1 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck1_voltage1 / 1000))
i++;
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
if (ret)
return ret;
/* Set predefined value for BUCK1 register 2 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck1_voltage2 / 1000))
i++;
max8998->buck1_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
if (ret)
return ret;
/* Set predefined value for BUCK1 register 3 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck1_voltage3 / 1000))
i++;
max8998->buck1_vol[2] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
if (ret)
return ret;
/* Set predefined value for BUCK1 register 4 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck1_voltage4 / 1000))
i++;
max8998->buck1_vol[3] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
if (ret)
return ret;
}
if (gpio_is_valid(pdata->buck2_set3)) {
/* Check if SET3 is not equal to 0 */
if (!pdata->buck2_set3) {
printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
WARN_ON(!pdata->buck2_set3);
return -EIO;
}
gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
gpio_direction_output(pdata->buck2_set3,
max8998->buck2_idx & 0x1);
/* BUCK2 register 1 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck2_voltage1 / 1000))
i++;
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
if (ret)
return ret;
/* BUCK2 register 2 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
< (pdata->buck2_voltage2 / 1000))
i++;
printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
max8998->buck2_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
if (ret)
return ret;
}
for (i = 0; i < pdata->num_regulators; i++) {
const struct voltage_map_desc *desc;
int id = pdata->regulators[i].id;
int index = id - MAX8998_LDO2;
desc = ldo_voltage_map[id];
if (desc && regulators[index].ops != &max8998_others_ops) {
int count = (desc->max - desc->min) / desc->step + 1;
regulators[index].n_voltages = count;
}
rdev[i] = regulator_register(&regulators[index], max8998->dev,
pdata->regulators[i].initdata, max8998);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(max8998->dev, "regulator init failed\n");
rdev[i] = NULL;
goto err;
}
}
return 0;
err:
for (i = 0; i < max8998->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
kfree(max8998->rdev);
kfree(max8998);
return ret;
}
static int __devexit max8998_pmic_remove(struct platform_device *pdev)
{
struct max8998_data *max8998 = platform_get_drvdata(pdev);
struct regulator_dev **rdev = max8998->rdev;
int i;
for (i = 0; i < max8998->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
kfree(max8998->rdev);
kfree(max8998);
return 0;
}
static const struct platform_device_id max8998_pmic_id[] = {
{ "max8998-pmic", TYPE_MAX8998 },
{ "lp3974-pmic", TYPE_LP3974 },
{ }
};
static struct platform_driver max8998_pmic_driver = {
.driver = {
.name = "max8998-pmic",
.owner = THIS_MODULE,
},
.probe = max8998_pmic_probe,
.remove = __devexit_p(max8998_pmic_remove),
.id_table = max8998_pmic_id,
};
static int __init max8998_pmic_init(void)
{
return platform_driver_register(&max8998_pmic_driver);
}
subsys_initcall(max8998_pmic_init);
static void __exit max8998_pmic_cleanup(void)
{
platform_driver_unregister(&max8998_pmic_driver);
}
module_exit(max8998_pmic_cleanup);
MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink