OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7325570471
linux/arch/sh/boards/Kconfig
Linus Torvalds 2e341ca686 Sound updates for 3.5-rc1 
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00

365 lines
8.8 KiB
Plaintext
Raw Blame History

menu "Board support"
config SOLUTION_ENGINE
bool
config SH_ALPHA_BOARD
bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
config SH_7206_SOLUTION_ENGINE
bool "SolutionEngine7206"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7206
help
Select 7206 SolutionEngine if configuring for a Hitachi SH7206
evaluation board.
config SH_7619_SOLUTION_ENGINE
bool "SolutionEngine7619"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7619
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7721_SOLUTION_ENGINE
bool "SolutionEngine7721"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7721
help
Select 7721 SolutionEngine if configuring for a Hitachi SH7721
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7724_SOLUTION_ENGINE
bool "SolutionEngine7724"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_RSK
bool "Renesas Starter Kit"
depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
help
Select this option if configuring for any of the RSK+ MCU
evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select SYS_SUPPORTS_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
config SH_SDK7786
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
select SYS_SUPPORTS_PCI
select NO_IOPORT if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED if MMU
config SH_SH7757LCR
bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757
select ARCH_REQUIRE_GPIOLIB
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
depends on SH_SH7785LCR && 29BIT
default y
help
This board has 2 physical memory maps. It can be changed with
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
config SH_SH7785LCR_PT
bool "SH7785LCR prototype board on 32-bit MMU mode"
depends on SH_SH7785LCR && 32BIT
default n
help
If you use prototype board, this option is enabled.
config SH_URQUELL
bool "Urquell"
depends on CPU_SUBTYPE_SH7786
select ARCH_REQUIRE_GPIOLIB
select SYS_SUPPORTS_PCI
select NO_IOPORT if !PCI
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
select ARCH_REQUIRE_GPIOLIB
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
select ARCH_REQUIRE_GPIOLIB
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
config SH_KFR2R09
bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
help
"Kit For R2R for 2009" support.
config SH_ECOVEC
bool "EcoVec"
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD
help
Renesas "R0P7724LC0011/21RL (EcoVec)" support.
config SH_SH7763RDP
bool "SH7763RDP"
depends on CPU_SUBTYPE_SH7763
help
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
config SH_ESPT
bool "ESPT"
depends on CPU_SUBTYPE_SH7763
help
Select ESPT if configuring for a Renesas SH7763
with gigabit ether evaluation board.
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_EDOSK7760
bool "EDOSK7760"
depends on CPU_SUBTYPE_SH7760
help
Select if configuring for a Renesas EDOSK7760
evaluation board.
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
depends on CPU_SUBTYPE_SH7706
select CPU_HAS_IPR_IRQ
help
Select SHMIN if configuring for the SHMIN board.
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
select NO_IOPORT if !PCI
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
select ARCH_REQUIRE_GPIOLIB
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7709
help
Select if configuring for an SMSC Polaris development board
config SH_SH2007
bool "SH-2007 board"
select NO_IOPORT
depends on CPU_SUBTYPE_SH7780
help
SH-2007 is a single-board computer based around SH7780 chip
intended for embedded applications.
It has an Ethernet interface (SMC9118), direct connected
Compact Flash socket, two serial ports and PC-104 bus.
More information at <http://sh2000.sh-linux.org>.
config SH_APSH4A3A
bool "AP-SH4A-3A"
select SH_ALPHA_BOARD
depends on CPU_SUBTYPE_SH7785
help
Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7786
help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
source "arch/sh/boards/mach-rsk/Kconfig"
if SH_MAGIC_PANEL_R2
menu "Magic Panel R2 options"
config SH_MAGIC_PANEL_R2_VERSION
int SH_MAGIC_PANEL_R2_VERSION
default "3"
help
Set the version of the Magic Panel R2
endmenu
endif
endmenu
Reference in New Issue View Git Blame Copy Permalink