OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
734c5cd5bc
linux/drivers/net/wireless/rayctl.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

735 lines
26 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _RAYCTL_H_
#define _RAYCTL_H_
typedef unsigned char UCHAR;
/****** IEEE 802.11 constants ************************************************/
#define ADDRLEN 6
/* Frame control 1 bit fields */
#define PROTOCOL_VER 0x00
#define DATA_TYPE 0x08
#define ASSOC_REQ_TYPE 0x00
#define ASSOC_RESP_TYPE 0x10
#define REASSOC_REQ_TYPE 0x20
#define REASSOC_RESP_TYPE 0x30
#define NULL_MSG_TYPE 0x48
#define BEACON_TYPE 0x80
#define DISASSOC_TYPE 0xA0
#define PSPOLL_TYPE 0xA4
#define AUTHENTIC_TYPE 0xB0
#define DEAUTHENTIC_TYPE 0xC0
/* Frame control 2 bit fields */
#define FC2_TO_DS 0x01
#define FC2_FROM_DS 0x02
#define FC2_MORE_FRAG 0x04
#define FC2_RETRY 0x08
#define FC2_PSM 0x10
#define FC2_MORE_DATA 0x20
#define FC2_WEP 0x40
#define FC2_ORDER 0x80
/*****************************************************************************/
/* 802.11 element ID's and lengths */
#define C_BP_CAPABILITY_ESS 0x01
#define C_BP_CAPABILITY_IBSS 0x02
#define C_BP_CAPABILITY_CF_POLLABLE 0x04
#define C_BP_CAPABILITY_CF_POLL_REQUEST 0x08
#define C_BP_CAPABILITY_PRIVACY 0x10
#define C_ESSID_ELEMENT_ID 0
#define C_ESSID_ELEMENT_MAX_LENGTH 32
#define C_SUPPORTED_RATES_ELEMENT_ID 1
#define C_SUPPORTED_RATES_ELEMENT_LENGTH 2
#define C_FH_PARAM_SET_ELEMENT_ID 2
#define C_FH_PARAM_SET_ELEMENT_LNGTH 5
#define C_CF_PARAM_SET_ELEMENT_ID 4
#define C_CF_PARAM_SET_ELEMENT_LNGTH 6
#define C_TIM_ELEMENT_ID 5
#define C_TIM_BITMAP_LENGTH 251
#define C_TIM_BMCAST_BIT 0x01
#define C_IBSS_ELEMENT_ID 6
#define C_IBSS_ELEMENT_LENGTH 2
#define C_JAPAN_CALL_SIGN_ELEMENT_ID 51
#define C_JAPAN_CALL_SIGN_ELEMENT_LNGTH 12
#define C_DISASSOC_REASON_CODE_LEN 2
#define C_DISASSOC_REASON_CODE_DEFAULT 8
#define C_CRC_LEN 4
#define C_NUM_SUPPORTED_RATES 8
/****** IEEE 802.11 mac header for type data packets *************************/
struct mac_header {
UCHAR frame_ctl_1;
UCHAR frame_ctl_2;
UCHAR duration_lsb;
UCHAR duration_msb;
UCHAR addr_1[ADDRLEN];
UCHAR addr_2[ADDRLEN];
UCHAR addr_3[ADDRLEN];
UCHAR seq_frag_num[2];
/* UCHAR addr_4[ADDRLEN]; *//* only present for AP to AP (TO DS and FROM DS */
};
/****** IEEE 802.11 frame element structures *********************************/
struct essid_element
{
UCHAR id;
UCHAR length;
UCHAR text[C_ESSID_ELEMENT_MAX_LENGTH];
};
struct rates_element
{
UCHAR id;
UCHAR length;
UCHAR value[8];
};
struct freq_hop_element
{
UCHAR id;
UCHAR length;
UCHAR dwell_time[2];
UCHAR hop_set;
UCHAR hop_pattern;
UCHAR hop_index;
};
struct tim_element
{
UCHAR id;
UCHAR length;
UCHAR dtim_count;
UCHAR dtim_period;
UCHAR bitmap_control;
UCHAR tim[C_TIM_BITMAP_LENGTH];
};
struct ibss_element
{
UCHAR id;
UCHAR length;
UCHAR atim_window[2];
};
struct japan_call_sign_element
{
UCHAR id;
UCHAR length;
UCHAR call_sign[12];
};
/****** Beacon message structures ********************************************/
/* .elements is a large lump of max size because elements are variable size */
struct infra_beacon
{
UCHAR timestamp[8];
UCHAR beacon_intvl[2];
UCHAR capability[2];
UCHAR elements[sizeof(struct essid_element)
+ sizeof(struct rates_element)
+ sizeof(struct freq_hop_element)
+ sizeof(struct japan_call_sign_element)
+ sizeof(struct tim_element)];
};
struct adhoc_beacon
{
UCHAR timestamp[8];
UCHAR beacon_intvl[2];
UCHAR capability[2];
UCHAR elements[sizeof(struct essid_element)
+ sizeof(struct rates_element)
+ sizeof(struct freq_hop_element)
+ sizeof(struct japan_call_sign_element)
+ sizeof(struct ibss_element)];
};
/*****************************************************************************/
/*****************************************************************************/
/* #define C_MAC_HDR_2_WEP 0x40 */
/* TX/RX CCS constants */
#define TX_HEADER_LENGTH 0x1C
#define RX_MAC_HEADER_LENGTH 0x18
#define TX_AUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 6)
#define TX_AUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
#define TX_AUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
#define TX_DEAUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 2)
#define TX_DEAUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
#define TX_DEAUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
#define FCS_LEN 4
#define ADHOC 0
#define INFRA 1
#define TYPE_STA 0
#define TYPE_AP 1
#define PASSIVE_SCAN 1
#define ACTIVE_SCAN 1
#define PSM_CAM 0
/* Country codes */
#define USA 1
#define EUROPE 2
#define JAPAN 3
#define KOREA 4
#define SPAIN 5
#define FRANCE 6
#define ISRAEL 7
#define AUSTRALIA 8
#define JAPAN_TEST 9
/* Hop pattern lengths */
#define USA_HOP_MOD 79
#define EUROPE_HOP_MOD 79
#define JAPAN_HOP_MOD 23
#define KOREA_HOP_MOD 23
#define SPAIN_HOP_MOD 27
#define FRANCE_HOP_MOD 35
#define ISRAEL_HOP_MOD 35
#define AUSTRALIA_HOP_MOD 47
#define JAPAN_TEST_HOP_MOD 23
#define ESSID_SIZE 32
/**********************************************************************/
/* CIS Register Constants */
#define CIS_OFFSET 0x0f00
/* Configuration Option Register (0x0F00) */
#define COR_OFFSET 0x00
#define COR_SOFT_RESET 0x80
#define COR_LEVEL_IRQ 0x40
#define COR_CONFIG_NUM 0x01
#define COR_DEFAULT (COR_LEVEL_IRQ | COR_CONFIG_NUM)
/* Card Configuration and Status Register (0x0F01) */
#define CCSR_OFFSET 0x01
#define CCSR_HOST_INTR_PENDING 0x01
#define CCSR_POWER_DOWN 0x04
/* HCS Interrupt Register (0x0F05) */
#define HCS_INTR_OFFSET 0x05
/* #define HCS_INTR_OFFSET 0x0A */
#define HCS_INTR_CLEAR 0x00
/* ECF Interrupt Register (0x0F06) */
#define ECF_INTR_OFFSET 0x06
/* #define ECF_INTR_OFFSET 0x0C */
#define ECF_INTR_SET 0x01
/* Authorization Register 0 (0x0F08) */
#define AUTH_0_ON 0x57
/* Authorization Register 1 (0x0F09) */
#define AUTH_1_ON 0x82
/* Program Mode Register (0x0F0A) */
#define PC2PM 0x02
#define PC2CAL 0x10
#define PC2MLSE 0x20
/* PC Test Mode Register (0x0F0B) */
#define PC_TEST_MODE 0x08
/* Frequency Control Word (0x0F10) */
/* Range 0x02 - 0xA6 */
/* Test Mode Control 1-4 (0x0F14 - 0x0F17) */
/**********************************************************************/
/* Shared RAM Area */
#define SCB_BASE 0x0000
#define STATUS_BASE 0x0100
#define HOST_TO_ECF_BASE 0x0200
#define ECF_TO_HOST_BASE 0x0300
#define CCS_BASE 0x0400
#define RCS_BASE 0x0800
#define INFRA_TIM_BASE 0x0C00
#define SSID_LIST_BASE 0x0D00
#define TX_BUF_BASE 0x1000
#define RX_BUF_BASE 0x8000
#define NUMBER_OF_CCS 64
#define NUMBER_OF_RCS 64
/*#define NUMBER_OF_TX_CCS 14 */
#define NUMBER_OF_TX_CCS 14
#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))
#define RX_BUFF_END 0x3FFF
/* Values for buffer_status */
#define CCS_BUFFER_FREE 0
#define CCS_BUFFER_BUSY 1
#define CCS_COMMAND_COMPLETE 2
#define CCS_COMMAND_FAILED 3
/* Values for cmd */
#define CCS_DOWNLOAD_STARTUP_PARAMS 1
#define CCS_UPDATE_PARAMS 2
#define CCS_REPORT_PARAMS 3
#define CCS_UPDATE_MULTICAST_LIST 4
#define CCS_UPDATE_POWER_SAVINGS_MODE 5
#define CCS_START_NETWORK 6
#define CCS_JOIN_NETWORK 7
#define CCS_START_ASSOCIATION 8
#define CCS_TX_REQUEST 9
#define CCS_TEST_MEMORY 0xa
#define CCS_SHUTDOWN 0xb
#define CCS_DUMP_MEMORY 0xc
#define CCS_START_TIMER 0xe
#define CCS_LAST_CMD CCS_START_TIMER
/* Values for link field */
#define CCS_END_LIST 0xff
/* values for buffer_status field */
#define RCS_BUFFER_FREE 0
#define RCS_BUFFER_BUSY 1
#define RCS_COMPLETE 2
#define RCS_FAILED 3
#define RCS_BUFFER_RELEASE 0xFF
/* values for interrupt_id field */
#define PROCESS_RX_PACKET 0x80 /* */
#define REJOIN_NET_COMPLETE 0x81 /* RCS ID: Rejoin Net Complete */
#define ROAMING_INITIATED 0x82 /* RCS ID: Roaming Initiated */
#define JAPAN_CALL_SIGN_RXD 0x83 /* RCS ID: New Japan Call Sign */
/*****************************************************************************/
/* Memory types for dump memory command */
#define C_MEM_PROG 0
#define C_MEM_XDATA 1
#define C_MEM_SFR 2
#define C_MEM_IDATA 3
/*** Return values for hw_xmit **********/
#define XMIT_OK (0)
#define XMIT_MSG_BAD (-1)
#define XMIT_NO_CCS (-2)
#define XMIT_NO_INTR (-3)
#define XMIT_NEED_AUTH (-4)
/*** Values for card status */
#define CARD_INSERTED (0)
#define CARD_AWAITING_PARAM (1)
#define CARD_INIT_ERROR (11)
#define CARD_DL_PARAM (2)
#define CARD_DL_PARAM_ERROR (12)
#define CARD_DOING_ACQ (3)
#define CARD_ACQ_COMPLETE (4)
#define CARD_ACQ_FAILED (14)
#define CARD_AUTH_COMPLETE (5)
#define CARD_AUTH_REFUSED (15)
#define CARD_ASSOC_COMPLETE (6)
#define CARD_ASSOC_FAILED (16)
/*** Values for authentication_state ***********************************/
#define UNAUTHENTICATED (0)
#define AWAITING_RESPONSE (1)
#define AUTHENTICATED (2)
#define NEED_TO_AUTH (3)
/*** Values for authentication type ************************************/
#define OPEN_AUTH_REQUEST (1)
#define OPEN_AUTH_RESPONSE (2)
#define BROADCAST_DEAUTH (0xc0)
/*** Values for timer functions ****************************************/
#define TODO_NOTHING (0)
#define TODO_VERIFY_DL_START (-1)
#define TODO_START_NET (-2)
#define TODO_JOIN_NET (-3)
#define TODO_AUTHENTICATE_TIMEOUT (-4)
#define TODO_SEND_CCS (-5)
/***********************************************************************/
/* Parameter passing structure for update/report parameter CCS's */
struct object_id {
void *object_addr;
unsigned char object_length;
};
#define OBJID_network_type 0
#define OBJID_acting_as_ap_status 1
#define OBJID_current_ess_id 2
#define OBJID_scanning_mode 3
#define OBJID_power_mgt_state 4
#define OBJID_mac_address 5
#define OBJID_frag_threshold 6
#define OBJID_hop_time 7
#define OBJID_beacon_period 8
#define OBJID_dtim_period 9
#define OBJID_retry_max 10
#define OBJID_ack_timeout 11
#define OBJID_sifs 12
#define OBJID_difs 13
#define OBJID_pifs 14
#define OBJID_rts_threshold 15
#define OBJID_scan_dwell_time 16
#define OBJID_max_scan_dwell_time 17
#define OBJID_assoc_resp_timeout 18
#define OBJID_adhoc_scan_cycle_max 19
#define OBJID_infra_scan_cycle_max 20
#define OBJID_infra_super_cycle_max 21
#define OBJID_promiscuous_mode 22
#define OBJID_unique_word 23
#define OBJID_slot_time 24
#define OBJID_roaming_low_snr 25
#define OBJID_low_snr_count_thresh 26
#define OBJID_infra_missed_bcn 27
#define OBJID_adhoc_missed_bcn 28
#define OBJID_curr_country_code 29
#define OBJID_hop_pattern 30
#define OBJID_reserved 31
#define OBJID_cw_max_msb 32
#define OBJID_cw_min_msb 33
#define OBJID_noise_filter_gain 34
#define OBJID_noise_limit_offset 35
#define OBJID_det_rssi_thresh_offset 36
#define OBJID_med_busy_thresh_offset 37
#define OBJID_det_sync_thresh 38
#define OBJID_test_mode 39
#define OBJID_test_min_chan_num 40
#define OBJID_test_max_chan_num 41
#define OBJID_allow_bcast_ID_prbrsp 42
#define OBJID_privacy_must_start 43
#define OBJID_privacy_can_join 44
#define OBJID_basic_rate_set 45
/**** Configuration/Status/Control Area ***************************/
/* System Control Block (SCB) Area
* Located at Shared RAM offset 0
*/
struct scb {
UCHAR ccs_index;
UCHAR rcs_index;
};
/****** Status area at Shared RAM offset 0x0100 ******************************/
struct status {
UCHAR mrx_overflow_for_host; /* 0=ECF may write, 1=host may write*/
UCHAR mrx_checksum_error_for_host; /* 0=ECF may write, 1=host may write*/
UCHAR rx_hec_error_for_host; /* 0=ECF may write, 1=host may write*/
UCHAR reserved1;
short mrx_overflow; /* ECF increments on rx overflow */
short mrx_checksum_error; /* ECF increments on rx CRC error */
short rx_hec_error; /* ECF incs on mac header CRC error */
UCHAR rxnoise; /* Average RSL measurement */
};
/****** Host-to-ECF Data Area at Shared RAM offset 0x200 *********************/
struct host_to_ecf_area {
};
/****** ECF-to-Host Data Area at Shared RAM offset 0x0300 ********************/
struct startup_res_518 {
UCHAR startup_word;
UCHAR station_addr[ADDRLEN];
UCHAR calc_prog_chksum;
UCHAR calc_cis_chksum;
UCHAR ecf_spare[7];
UCHAR japan_call_sign[12];
};
struct startup_res_6 {
UCHAR startup_word;
UCHAR station_addr[ADDRLEN];
UCHAR reserved;
UCHAR supp_rates[8];
UCHAR japan_call_sign[12];
UCHAR calc_prog_chksum;
UCHAR calc_cis_chksum;
UCHAR firmware_version[3];
UCHAR asic_version;
UCHAR tib_length;
};
struct start_join_net_params {
UCHAR net_type;
UCHAR ssid[ESSID_SIZE];
UCHAR reserved;
UCHAR privacy_can_join;
};
/****** Command Control Structure area at Shared ram offset 0x0400 ***********/
/* Structures for command specific parameters (ccs.var) */
struct update_param_cmd {
UCHAR object_id;
UCHAR number_objects;
UCHAR failure_cause;
};
struct report_param_cmd {
UCHAR object_id;
UCHAR number_objects;
UCHAR failure_cause;
UCHAR length;
};
struct start_network_cmd {
UCHAR update_param;
UCHAR bssid[ADDRLEN];
UCHAR net_initiated;
UCHAR net_default_tx_rate;
UCHAR encryption;
};
struct join_network_cmd {
UCHAR update_param;
UCHAR bssid[ADDRLEN];
UCHAR net_initiated;
UCHAR net_default_tx_rate;
UCHAR encryption;
};
struct tx_requested_cmd {
UCHAR tx_data_ptr[2];
UCHAR tx_data_length[2];
UCHAR host_reserved[2];
UCHAR reserved[3];
UCHAR tx_rate;
UCHAR pow_sav_mode;
UCHAR retries;
UCHAR antenna;
};
struct tx_requested_cmd_4 {
UCHAR tx_data_ptr[2];
UCHAR tx_data_length[2];
UCHAR dest_addr[ADDRLEN];
UCHAR pow_sav_mode;
UCHAR retries;
UCHAR station_id;
};
struct memory_dump_cmd {
UCHAR memory_type;
UCHAR memory_ptr[2];
UCHAR length;
};
struct update_association_cmd {
UCHAR status;
UCHAR aid[2];
};
struct start_timer_cmd {
UCHAR duration[2];
};
struct ccs {
UCHAR buffer_status; /* 0 = buffer free, 1 = buffer busy */
/* 2 = command complete, 3 = failed */
UCHAR cmd; /* command to ECF */
UCHAR link; /* link to next CCS, FF=end of list */
/* command specific parameters */
union {
char reserved[13];
struct update_param_cmd update_param;
struct report_param_cmd report_param;
UCHAR nummulticast;
UCHAR mode;
struct start_network_cmd start_network;
struct join_network_cmd join_network;
struct tx_requested_cmd tx_request;
struct memory_dump_cmd memory_dump;
struct update_association_cmd update_assoc;
struct start_timer_cmd start_timer;
} var;
};
/*****************************************************************************/
/* Transmit buffer structures */
struct tib_structure {
UCHAR ccs_index;
UCHAR psm;
UCHAR pass_fail;
UCHAR retry_count;
UCHAR max_retries;
UCHAR frags_remaining;
UCHAR no_rb;
UCHAR rts_reqd;
UCHAR csma_tx_cntrl_2;
UCHAR sifs_tx_cntrl_2;
UCHAR tx_dma_addr_1[2];
UCHAR tx_dma_addr_2[2];
UCHAR var_dur_2mhz[2];
UCHAR var_dur_1mhz[2];
UCHAR max_dur_2mhz[2];
UCHAR max_dur_1mhz[2];
UCHAR hdr_len;
UCHAR max_frag_len[2];
UCHAR var_len[2];
UCHAR phy_hdr_4;
UCHAR mac_hdr_1;
UCHAR mac_hdr_2;
UCHAR sid[2];
};
struct phy_header {
UCHAR sfd[2];
UCHAR hdr_3;
UCHAR hdr_4;
};
struct ray_rx_msg {
struct mac_header mac;
UCHAR var[0];
};
struct tx_msg {
struct tib_structure tib;
struct phy_header phy;
struct mac_header mac;
UCHAR var[1];
};
/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800 */
/* Structures for command specific parameters (rcs.var) */
struct rx_packet_cmd {
UCHAR rx_data_ptr[2];
UCHAR rx_data_length[2];
UCHAR rx_sig_lev;
UCHAR next_frag_rcs_index;
UCHAR totalpacketlength[2];
};
struct rejoin_net_cmplt_cmd {
UCHAR reserved;
UCHAR bssid[ADDRLEN];
};
struct japan_call_sign_rxd {
UCHAR rxd_call_sign[8];
UCHAR reserved[5];
};
struct rcs {
UCHAR buffer_status;
UCHAR interrupt_id;
UCHAR link_field;
/* command specific parameters */
union {
UCHAR reserved[13];
struct rx_packet_cmd rx_packet;
struct rejoin_net_cmplt_cmd rejoin_net_complete;
struct japan_call_sign_rxd japan_call_sign;
} var;
};
/****** Startup parameter structures for both versions of firmware ***********/
struct b4_startup_params {
UCHAR a_network_type; /* C_ADHOC, C_INFRA */
UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
UCHAR a_scanning_mode; /* passive 0, active 1 */
UCHAR a_power_mgt_state; /* CAM 0, */
UCHAR a_mac_addr[ADDRLEN]; /* */
UCHAR a_frag_threshold[2]; /* 512 */
UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
UCHAR a_dtim_period; /* in beacons */
UCHAR a_retry_max; /* */
UCHAR a_ack_timeout; /* */
UCHAR a_sifs; /* */
UCHAR a_difs; /* */
UCHAR a_pifs; /* */
UCHAR a_rts_threshold[2]; /* */
UCHAR a_scan_dwell_time[2]; /* */
UCHAR a_max_scan_dwell_time[2]; /* */
UCHAR a_assoc_resp_timeout_thresh; /* */
UCHAR a_adhoc_scan_cycle_max; /* */
UCHAR a_infra_scan_cycle_max; /* */
UCHAR a_infra_super_scan_cycle_max; /* */
UCHAR a_promiscuous_mode; /* */
UCHAR a_unique_word[2]; /* */
UCHAR a_slot_time; /* */
UCHAR a_roaming_low_snr_thresh; /* */
UCHAR a_low_snr_count_thresh; /* */
UCHAR a_infra_missed_bcn_thresh; /* */
UCHAR a_adhoc_missed_bcn_thresh; /* */
UCHAR a_curr_country_code; /* C_USA */
UCHAR a_hop_pattern; /* */
UCHAR a_hop_pattern_length; /* */
/* b4 - b5 differences start here */
UCHAR a_cw_max; /* */
UCHAR a_cw_min; /* */
UCHAR a_noise_filter_gain; /* */
UCHAR a_noise_limit_offset; /* */
UCHAR a_det_rssi_thresh_offset; /* */
UCHAR a_med_busy_thresh_offset; /* */
UCHAR a_det_sync_thresh; /* */
UCHAR a_test_mode; /* */
UCHAR a_test_min_chan_num; /* */
UCHAR a_test_max_chan_num; /* */
UCHAR a_rx_tx_delay; /* */
UCHAR a_current_bss_id[ADDRLEN]; /* */
UCHAR a_hop_set; /* */
};
struct b5_startup_params {
UCHAR a_network_type; /* C_ADHOC, C_INFRA */
UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
UCHAR a_scanning_mode; /* passive 0, active 1 */
UCHAR a_power_mgt_state; /* CAM 0, */
UCHAR a_mac_addr[ADDRLEN]; /* */
UCHAR a_frag_threshold[2]; /* 512 */
UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
UCHAR a_dtim_period; /* in beacons */
UCHAR a_retry_max; /* 4 */
UCHAR a_ack_timeout; /* */
UCHAR a_sifs; /* */
UCHAR a_difs; /* */
UCHAR a_pifs; /* */
UCHAR a_rts_threshold[2]; /* */
UCHAR a_scan_dwell_time[2]; /* */
UCHAR a_max_scan_dwell_time[2]; /* */
UCHAR a_assoc_resp_timeout_thresh; /* */
UCHAR a_adhoc_scan_cycle_max; /* */
UCHAR a_infra_scan_cycle_max; /* */
UCHAR a_infra_super_scan_cycle_max; /* */
UCHAR a_promiscuous_mode; /* */
UCHAR a_unique_word[2]; /* */
UCHAR a_slot_time; /* */
UCHAR a_roaming_low_snr_thresh; /* */
UCHAR a_low_snr_count_thresh; /* */
UCHAR a_infra_missed_bcn_thresh; /* */
UCHAR a_adhoc_missed_bcn_thresh; /* */
UCHAR a_curr_country_code; /* C_USA */
UCHAR a_hop_pattern; /* */
UCHAR a_hop_pattern_length; /* */
/* b4 - b5 differences start here */
UCHAR a_cw_max[2]; /* */
UCHAR a_cw_min[2]; /* */
UCHAR a_noise_filter_gain; /* */
UCHAR a_noise_limit_offset; /* */
UCHAR a_det_rssi_thresh_offset; /* */
UCHAR a_med_busy_thresh_offset; /* */
UCHAR a_det_sync_thresh; /* */
UCHAR a_test_mode; /* */
UCHAR a_test_min_chan_num; /* */
UCHAR a_test_max_chan_num; /* */
UCHAR a_allow_bcast_SSID_probe_rsp;
UCHAR a_privacy_must_start;
UCHAR a_privacy_can_join;
UCHAR a_basic_rate_set[8];
};
/*****************************************************************************/
#define RAY_IOCG_PARMS (SIOCDEVPRIVATE)
#define RAY_IOCS_PARMS (SIOCDEVPRIVATE + 1)
#define RAY_DO_CMD (SIOCDEVPRIVATE + 2)
/****** ethernet <-> 802.11 translation **************************************/
typedef struct snaphdr_t
{
UCHAR dsap;
UCHAR ssap;
UCHAR ctrl;
UCHAR org[3];
UCHAR ethertype[2];
} snaphdr_t;
#define BRIDGE_ENCAP 0xf80000
#define RFC1042_ENCAP 0
#define SNAP_ID 0x0003aaaa
#define RAY_IPX_TYPE 0x8137
#define APPLEARP_TYPE 0x80f3
/*****************************************************************************/
#endif /* _RAYCTL_H_ */
Reference in New Issue View Git Blame Copy Permalink