David Brownell c06d4dcf50 usb: ehci should use u16 for isochronous intervals ... While most isochronous endpoints have short polling intervals, the EHCI driver won't necessarily handle larger ones correctly. This patch switches to use a "u16" to represent those periods, not a u8, since it can always work: the largest expressible period is 2^15 units ... not the previous too-short limit of 128 frames (full or low speeds) or microframes (high speed, 32 frames). This bug is essentially theoretical, since the few ISO endpoints I've seen which don't use one transfer per frame are high speed ones using more than that (including high bandwidth, 24 KB/msec). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>		2008-02-01 14:35:06 -08:00
..
ehci-au1xxx.c	USB: force handover port to companion when hub_port_connect_change fails	2008-02-01 14:34:52 -08:00
ehci-dbg.c	USB: EHCI: add separate IAA watchdog timer	2008-02-01 14:34:55 -08:00
ehci-fsl.c	USB: Spelling fixes	2008-02-01 14:34:57 -08:00
ehci-fsl.h
ehci-hcd.c	USB: add ehci-ixp bus glue	2008-02-01 14:35:02 -08:00
ehci-hub.c	usb: ehci, remove false clear-reset path	2008-02-01 14:35:06 -08:00
ehci-ixp4xx.c	USB: add ehci-ixp bus glue	2008-02-01 14:35:02 -08:00
ehci-mem.c
ehci-orion.c	USB: add Marvell Orion USB host support	2008-02-01 14:34:58 -08:00
ehci-pci.c	USB: EHCI: add separate IAA watchdog timer	2008-02-01 14:34:55 -08:00
ehci-ppc-of.c	USB: add ehci-ppc-of bus glue (device-tree aware)	2008-02-01 14:35:01 -08:00
ehci-ppc-soc.c	USB: force handover port to companion when hub_port_connect_change fails	2008-02-01 14:34:52 -08:00
ehci-ps3.c	USB: force handover port to companion when hub_port_connect_change fails	2008-02-01 14:34:52 -08:00
ehci-q.c	USB: ehci potential oops fix on ARC/TDI cores	2008-02-01 14:34:58 -08:00
ehci-sched.c	USB: ehci completes high speed ISO URBs sooner	2008-02-01 14:35:02 -08:00
ehci.h	usb: ehci should use u16 for isochronous intervals	2008-02-01 14:35:06 -08:00
isp116x-hcd.c	USB: Drop unnecessary continue in a few drivers	2008-02-01 14:34:51 -08:00
isp116x.h
Kconfig	USB: ehci: minor ISO updates, always support split ISO	2008-02-01 14:35:02 -08:00
Makefile
ohci-at91.c	USB: ohci-at91 uses generic GPIO calls	2008-02-01 14:35:01 -08:00
ohci-au1xxx.c
ohci-dbg.c	USB: convert ohci debug files to use debugfs instead of sysfs	2008-02-01 14:34:52 -08:00
ohci-ep93xx.c
ohci-hcd.c	usb: ohci-sm501 driver	2008-02-01 14:35:05 -08:00
ohci-hub.c
ohci-lh7a404.c
ohci-mem.c
ohci-omap.c	i2c/tps65010: move header to <linux/i2c/...>	2008-01-27 18:14:49 +01:00
ohci-pci.c
ohci-pnx4008.c	i2c: Kill rogue driver IDs	2008-01-27 18:14:47 +01:00
ohci-pnx8550.c
ohci-ppc-of.c	[POWERPC] mpc5200: normalize compatible property bindings	2008-01-26 15:26:01 -07:00
ohci-ppc-soc.c
ohci-ps3.c
ohci-pxa27x.c	[ARM] USB: update pxa27x ohci driver to use clk support	2008-01-26 15:07:53 +00:00
ohci-q.c
ohci-s3c2410.c
ohci-sa1111.c
ohci-sh.c	USB: add support for SuperH OHCI	2008-02-01 14:35:03 -08:00
ohci-sm501.c	usb: ohci-sm501 driver	2008-02-01 14:35:05 -08:00
ohci-ssb.c	USB: use IRQF_DISABLED for HCD interrupt handlers	2007-12-17 10:47:15 -08:00
ohci.h	USB: convert ohci debug files to use debugfs instead of sysfs	2008-02-01 14:34:52 -08:00
pci-quirks.c
pci-quirks.h
r8a66597-hcd.c	USB: use IRQF_DISABLED for HCD interrupt handlers	2007-12-17 10:47:15 -08:00
r8a66597.h	USB: Spelling fixes	2008-02-01 14:34:57 -08:00
sl811_cs.c
sl811-hcd.c
sl811.h
u132-hcd.c
uhci-debug.c
uhci-hcd.c	USB: use IRQF_DISABLED for HCD interrupt handlers	2007-12-17 10:47:15 -08:00
uhci-hcd.h
uhci-hub.c
uhci-q.c	USB: fix scheduling of Iso URBs in uhci-hcd	2007-10-25 12:18:43 -07:00