047b51fb20
Add a missing break at end of switch statement. At the moment it is a fall through to WARN_ON(1) and return -EEXIST. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
1078 lines
28 KiB
C
1078 lines
28 KiB
C
/*
|
|
* OMAP powerdomain control
|
|
*
|
|
* Copyright (C) 2007-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2007-2009 Nokia Corporation
|
|
*
|
|
* Written by Paul Walmsley
|
|
* Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
|
|
* State counting code by Tero Kristo <tero.kristo@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/atomic.h>
|
|
|
|
#include "cm.h"
|
|
#include "cm-regbits-34xx.h"
|
|
#include "cm-regbits-44xx.h"
|
|
#include "prm.h"
|
|
#include "prm-regbits-34xx.h"
|
|
#include "prm-regbits-44xx.h"
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/powerdomain.h>
|
|
#include <plat/clockdomain.h>
|
|
#include <plat/prcm.h>
|
|
|
|
#include "pm.h"
|
|
|
|
enum {
|
|
PWRDM_STATE_NOW = 0,
|
|
PWRDM_STATE_PREV,
|
|
};
|
|
|
|
/* Variable holding value of the CPU dependent PWRSTCTRL Register Offset */
|
|
static u16 pwrstctrl_reg_offs;
|
|
|
|
/* Variable holding value of the CPU dependent PWRSTST Register Offset */
|
|
static u16 pwrstst_reg_offs;
|
|
|
|
/* OMAP3 and OMAP4 specific register bit initialisations
|
|
* Notice that the names here are not according to each power
|
|
* domain but the bit mapping used applies to all of them
|
|
*/
|
|
|
|
/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
|
|
#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
|
|
#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
|
|
#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
|
|
#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
|
|
#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
|
|
|
|
/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
|
|
#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
|
|
#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
|
|
#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
|
|
#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
|
|
#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
|
|
|
|
/* OMAP3 and OMAP4 Memory Status bits */
|
|
#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
|
|
#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
|
|
#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
|
|
#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
|
|
#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
|
|
|
|
/* pwrdm_list contains all registered struct powerdomains */
|
|
static LIST_HEAD(pwrdm_list);
|
|
|
|
/* Private functions */
|
|
|
|
static struct powerdomain *_pwrdm_lookup(const char *name)
|
|
{
|
|
struct powerdomain *pwrdm, *temp_pwrdm;
|
|
|
|
pwrdm = NULL;
|
|
|
|
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
|
|
if (!strcmp(name, temp_pwrdm->name)) {
|
|
pwrdm = temp_pwrdm;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return pwrdm;
|
|
}
|
|
|
|
/**
|
|
* _pwrdm_register - register a powerdomain
|
|
* @pwrdm: struct powerdomain * to register
|
|
*
|
|
* Adds a powerdomain to the internal powerdomain list. Returns
|
|
* -EINVAL if given a null pointer, -EEXIST if a powerdomain is
|
|
* already registered by the provided name, or 0 upon success.
|
|
*/
|
|
static int _pwrdm_register(struct powerdomain *pwrdm)
|
|
{
|
|
int i;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!omap_chip_is(pwrdm->omap_chip))
|
|
return -EINVAL;
|
|
|
|
if (_pwrdm_lookup(pwrdm->name))
|
|
return -EEXIST;
|
|
|
|
list_add(&pwrdm->node, &pwrdm_list);
|
|
|
|
/* Initialize the powerdomain's state counter */
|
|
for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
|
|
pwrdm->state_counter[i] = 0;
|
|
|
|
pwrdm->ret_logic_off_counter = 0;
|
|
for (i = 0; i < pwrdm->banks; i++)
|
|
pwrdm->ret_mem_off_counter[i] = 0;
|
|
|
|
pwrdm_wait_transition(pwrdm);
|
|
pwrdm->state = pwrdm_read_pwrst(pwrdm);
|
|
pwrdm->state_counter[pwrdm->state] = 1;
|
|
|
|
pr_debug("powerdomain: registered %s\n", pwrdm->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _update_logic_membank_counters(struct powerdomain *pwrdm)
|
|
{
|
|
int i;
|
|
u8 prev_logic_pwrst, prev_mem_pwrst;
|
|
|
|
prev_logic_pwrst = pwrdm_read_prev_logic_pwrst(pwrdm);
|
|
if ((pwrdm->pwrsts_logic_ret == PWRSTS_OFF_RET) &&
|
|
(prev_logic_pwrst == PWRDM_POWER_OFF))
|
|
pwrdm->ret_logic_off_counter++;
|
|
|
|
for (i = 0; i < pwrdm->banks; i++) {
|
|
prev_mem_pwrst = pwrdm_read_prev_mem_pwrst(pwrdm, i);
|
|
|
|
if ((pwrdm->pwrsts_mem_ret[i] == PWRSTS_OFF_RET) &&
|
|
(prev_mem_pwrst == PWRDM_POWER_OFF))
|
|
pwrdm->ret_mem_off_counter[i]++;
|
|
}
|
|
}
|
|
|
|
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
|
|
{
|
|
|
|
int prev;
|
|
int state;
|
|
|
|
if (pwrdm == NULL)
|
|
return -EINVAL;
|
|
|
|
state = pwrdm_read_pwrst(pwrdm);
|
|
|
|
switch (flag) {
|
|
case PWRDM_STATE_NOW:
|
|
prev = pwrdm->state;
|
|
break;
|
|
case PWRDM_STATE_PREV:
|
|
prev = pwrdm_read_prev_pwrst(pwrdm);
|
|
if (pwrdm->state != prev)
|
|
pwrdm->state_counter[prev]++;
|
|
if (prev == PWRDM_POWER_RET)
|
|
_update_logic_membank_counters(pwrdm);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state != prev)
|
|
pwrdm->state_counter[state]++;
|
|
|
|
pm_dbg_update_time(pwrdm, prev);
|
|
|
|
pwrdm->state = state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
|
|
{
|
|
pwrdm_clear_all_prev_pwrst(pwrdm);
|
|
_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
|
|
return 0;
|
|
}
|
|
|
|
static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
|
|
{
|
|
_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
|
|
return 0;
|
|
}
|
|
|
|
/* Public functions */
|
|
|
|
/**
|
|
* pwrdm_init - set up the powerdomain layer
|
|
* @pwrdm_list: array of struct powerdomain pointers to register
|
|
*
|
|
* Loop through the array of powerdomains @pwrdm_list, registering all
|
|
* that are available on the current CPU. If pwrdm_list is supplied
|
|
* and not null, all of the referenced powerdomains will be
|
|
* registered. No return value. XXX pwrdm_list is not really a
|
|
* "list"; it is an array. Rename appropriately.
|
|
*/
|
|
void pwrdm_init(struct powerdomain **pwrdm_list)
|
|
{
|
|
struct powerdomain **p = NULL;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
|
|
pwrstst_reg_offs = OMAP2_PM_PWSTST;
|
|
} else if (cpu_is_omap44xx()) {
|
|
pwrstctrl_reg_offs = OMAP4_PM_PWSTCTRL;
|
|
pwrstst_reg_offs = OMAP4_PM_PWSTST;
|
|
} else {
|
|
printk(KERN_ERR "Power Domain struct not supported for " \
|
|
"this CPU\n");
|
|
return;
|
|
}
|
|
|
|
if (pwrdm_list) {
|
|
for (p = pwrdm_list; *p; p++)
|
|
_pwrdm_register(*p);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pwrdm_lookup - look up a powerdomain by name, return a pointer
|
|
* @name: name of powerdomain
|
|
*
|
|
* Find a registered powerdomain by its name @name. Returns a pointer
|
|
* to the struct powerdomain if found, or NULL otherwise.
|
|
*/
|
|
struct powerdomain *pwrdm_lookup(const char *name)
|
|
{
|
|
struct powerdomain *pwrdm;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
pwrdm = _pwrdm_lookup(name);
|
|
|
|
return pwrdm;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_for_each - call function on each registered clockdomain
|
|
* @fn: callback function *
|
|
*
|
|
* Call the supplied function @fn for each registered powerdomain.
|
|
* The callback function @fn can return anything but 0 to bail out
|
|
* early from the iterator. Returns the last return value of the
|
|
* callback function, which should be 0 for success or anything else
|
|
* to indicate failure; or -EINVAL if the function pointer is null.
|
|
*/
|
|
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
|
|
void *user)
|
|
{
|
|
struct powerdomain *temp_pwrdm;
|
|
int ret = 0;
|
|
|
|
if (!fn)
|
|
return -EINVAL;
|
|
|
|
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
|
|
ret = (*fn)(temp_pwrdm, user);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_add_clkdm - add a clockdomain to a powerdomain
|
|
* @pwrdm: struct powerdomain * to add the clockdomain to
|
|
* @clkdm: struct clockdomain * to associate with a powerdomain
|
|
*
|
|
* Associate the clockdomain @clkdm with a powerdomain @pwrdm. This
|
|
* enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if
|
|
* presented with invalid pointers; -ENOMEM if memory could not be allocated;
|
|
* or 0 upon success.
|
|
*/
|
|
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
|
|
{
|
|
int i;
|
|
int ret = -EINVAL;
|
|
|
|
if (!pwrdm || !clkdm)
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: associating clockdomain %s with powerdomain "
|
|
"%s\n", clkdm->name, pwrdm->name);
|
|
|
|
for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
|
|
if (!pwrdm->pwrdm_clkdms[i])
|
|
break;
|
|
#ifdef DEBUG
|
|
if (pwrdm->pwrdm_clkdms[i] == clkdm) {
|
|
ret = -EINVAL;
|
|
goto pac_exit;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
if (i == PWRDM_MAX_CLKDMS) {
|
|
pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
|
|
"pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
|
|
WARN_ON(1);
|
|
ret = -ENOMEM;
|
|
goto pac_exit;
|
|
}
|
|
|
|
pwrdm->pwrdm_clkdms[i] = clkdm;
|
|
|
|
ret = 0;
|
|
|
|
pac_exit:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_del_clkdm - remove a clockdomain from a powerdomain
|
|
* @pwrdm: struct powerdomain * to add the clockdomain to
|
|
* @clkdm: struct clockdomain * to associate with a powerdomain
|
|
*
|
|
* Dissociate the clockdomain @clkdm from the powerdomain
|
|
* @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT
|
|
* if @clkdm was not associated with the powerdomain, or 0 upon
|
|
* success.
|
|
*/
|
|
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
|
|
{
|
|
int ret = -EINVAL;
|
|
int i;
|
|
|
|
if (!pwrdm || !clkdm)
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
|
|
"%s\n", clkdm->name, pwrdm->name);
|
|
|
|
for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
|
|
if (pwrdm->pwrdm_clkdms[i] == clkdm)
|
|
break;
|
|
|
|
if (i == PWRDM_MAX_CLKDMS) {
|
|
pr_debug("powerdomain: clkdm %s not associated with pwrdm "
|
|
"%s ?!\n", clkdm->name, pwrdm->name);
|
|
ret = -ENOENT;
|
|
goto pdc_exit;
|
|
}
|
|
|
|
pwrdm->pwrdm_clkdms[i] = NULL;
|
|
|
|
ret = 0;
|
|
|
|
pdc_exit:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm
|
|
* @pwrdm: struct powerdomain * to iterate over
|
|
* @fn: callback function *
|
|
*
|
|
* Call the supplied function @fn for each clockdomain in the powerdomain
|
|
* @pwrdm. The callback function can return anything but 0 to bail
|
|
* out early from the iterator. Returns -EINVAL if presented with
|
|
* invalid pointers; or passes along the last return value of the
|
|
* callback function, which should be 0 for success or anything else
|
|
* to indicate failure.
|
|
*/
|
|
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
|
|
int (*fn)(struct powerdomain *pwrdm,
|
|
struct clockdomain *clkdm))
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
|
|
if (!fn)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
|
|
ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
|
|
* @pwrdm: struct powerdomain *
|
|
*
|
|
* Return the number of controllable memory banks in powerdomain @pwrdm,
|
|
* starting with 1. Returns -EINVAL if the powerdomain pointer is null.
|
|
*/
|
|
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
return pwrdm->banks;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_set_next_pwrst - set next powerdomain power state
|
|
* @pwrdm: struct powerdomain * to set
|
|
* @pwrst: one of the PWRDM_POWER_* macros
|
|
*
|
|
* Set the powerdomain @pwrdm's next power state to @pwrst. The powerdomain
|
|
* may not enter this state immediately if the preconditions for this state
|
|
* have not been satisfied. Returns -EINVAL if the powerdomain pointer is
|
|
* null or if the power state is invalid for the powerdomin, or returns 0
|
|
* upon success.
|
|
*/
|
|
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!(pwrdm->pwrsts & (1 << pwrst)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
|
|
pwrdm->name, pwrst);
|
|
|
|
prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
|
|
(pwrst << OMAP_POWERSTATE_SHIFT),
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_next_pwrst - get next powerdomain power state
|
|
* @pwrdm: struct powerdomain * to get power state
|
|
*
|
|
* Return the powerdomain @pwrdm's next power state. Returns -EINVAL
|
|
* if the powerdomain pointer is null or returns the next power state
|
|
* upon success.
|
|
*/
|
|
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
|
|
pwrstctrl_reg_offs, OMAP_POWERSTATE_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_pwrst - get current powerdomain power state
|
|
* @pwrdm: struct powerdomain * to get power state
|
|
*
|
|
* Return the powerdomain @pwrdm's current power state. Returns -EINVAL
|
|
* if the powerdomain pointer is null or returns the current power state
|
|
* upon success.
|
|
*/
|
|
int pwrdm_read_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
|
|
pwrstst_reg_offs, OMAP_POWERSTATEST_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_prev_pwrst - get previous powerdomain power state
|
|
* @pwrdm: struct powerdomain * to get previous power state
|
|
*
|
|
* Return the powerdomain @pwrdm's previous power state. Returns -EINVAL
|
|
* if the powerdomain pointer is null or returns the previous power state
|
|
* upon success.
|
|
*/
|
|
int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
|
|
OMAP3430_LASTPOWERSTATEENTERED_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_set_logic_retst - set powerdomain logic power state upon retention
|
|
* @pwrdm: struct powerdomain * to set
|
|
* @pwrst: one of the PWRDM_POWER_* macros
|
|
*
|
|
* Set the next power state @pwrst that the logic portion of the
|
|
* powerdomain @pwrdm will enter when the powerdomain enters retention.
|
|
* This will be either RETENTION or OFF, if supported. Returns
|
|
* -EINVAL if the powerdomain pointer is null or the target power
|
|
* state is not not supported, or returns 0 upon success.
|
|
*/
|
|
int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
|
|
{
|
|
u32 v;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
|
|
pwrdm->name, pwrst);
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
|
|
prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_set_mem_onst - set memory power state while powerdomain ON
|
|
* @pwrdm: struct powerdomain * to set
|
|
* @bank: memory bank number to set (0-3)
|
|
* @pwrst: one of the PWRDM_POWER_* macros
|
|
*
|
|
* Set the next power state @pwrst that memory bank @bank of the
|
|
* powerdomain @pwrdm will enter when the powerdomain enters the ON
|
|
* state. @bank will be a number from 0 to 3, and represents different
|
|
* types of memory, depending on the powerdomain. Returns -EINVAL if
|
|
* the powerdomain pointer is null or the target power state is not
|
|
* not supported for this memory bank, -EEXIST if the target memory
|
|
* bank does not exist or is not controllable, or returns 0 upon
|
|
* success.
|
|
*/
|
|
int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
|
|
{
|
|
u32 m;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (pwrdm->banks < (bank + 1))
|
|
return -EEXIST;
|
|
|
|
if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: setting next memory powerstate for domain %s "
|
|
"bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
switch (bank) {
|
|
case 0:
|
|
m = OMAP_MEM0_ONSTATE_MASK;
|
|
break;
|
|
case 1:
|
|
m = OMAP_MEM1_ONSTATE_MASK;
|
|
break;
|
|
case 2:
|
|
m = OMAP_MEM2_ONSTATE_MASK;
|
|
break;
|
|
case 3:
|
|
m = OMAP_MEM3_ONSTATE_MASK;
|
|
break;
|
|
case 4:
|
|
m = OMAP_MEM4_ONSTATE_MASK;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* should never happen */
|
|
return -EEXIST;
|
|
}
|
|
|
|
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_set_mem_retst - set memory power state while powerdomain in RET
|
|
* @pwrdm: struct powerdomain * to set
|
|
* @bank: memory bank number to set (0-3)
|
|
* @pwrst: one of the PWRDM_POWER_* macros
|
|
*
|
|
* Set the next power state @pwrst that memory bank @bank of the
|
|
* powerdomain @pwrdm will enter when the powerdomain enters the
|
|
* RETENTION state. Bank will be a number from 0 to 3, and represents
|
|
* different types of memory, depending on the powerdomain. @pwrst
|
|
* will be either RETENTION or OFF, if supported. Returns -EINVAL if
|
|
* the powerdomain pointer is null or the target power state is not
|
|
* not supported for this memory bank, -EEXIST if the target memory
|
|
* bank does not exist or is not controllable, or returns 0 upon
|
|
* success.
|
|
*/
|
|
int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
|
|
{
|
|
u32 m;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (pwrdm->banks < (bank + 1))
|
|
return -EEXIST;
|
|
|
|
if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: setting next memory powerstate for domain %s "
|
|
"bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
switch (bank) {
|
|
case 0:
|
|
m = OMAP_MEM0_RETSTATE_MASK;
|
|
break;
|
|
case 1:
|
|
m = OMAP_MEM1_RETSTATE_MASK;
|
|
break;
|
|
case 2:
|
|
m = OMAP_MEM2_RETSTATE_MASK;
|
|
break;
|
|
case 3:
|
|
m = OMAP_MEM3_RETSTATE_MASK;
|
|
break;
|
|
case 4:
|
|
m = OMAP_MEM4_RETSTATE_MASK;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* should never happen */
|
|
return -EEXIST;
|
|
}
|
|
|
|
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
|
|
pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
|
|
* @pwrdm: struct powerdomain * to get current logic retention power state
|
|
*
|
|
* Return the power state that the logic portion of powerdomain @pwrdm
|
|
* will enter when the powerdomain enters retention. Returns -EINVAL
|
|
* if the powerdomain pointer is null or returns the logic retention
|
|
* power state upon success.
|
|
*/
|
|
int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
|
|
OMAP3430_LOGICSTATEST_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
|
|
* @pwrdm: struct powerdomain * to get previous logic power state
|
|
*
|
|
* Return the powerdomain @pwrdm's previous logic power state. Returns
|
|
* -EINVAL if the powerdomain pointer is null or returns the previous
|
|
* logic power state upon success.
|
|
*/
|
|
int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
|
|
OMAP3430_LASTLOGICSTATEENTERED_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_logic_retst - get next powerdomain logic power state
|
|
* @pwrdm: struct powerdomain * to get next logic power state
|
|
*
|
|
* Return the powerdomain pwrdm's logic power state. Returns -EINVAL
|
|
* if the powerdomain pointer is null or returns the next logic
|
|
* power state upon success.
|
|
*/
|
|
int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
|
|
OMAP3430_LOGICSTATEST_MASK);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_mem_pwrst - get current memory bank power state
|
|
* @pwrdm: struct powerdomain * to get current memory bank power state
|
|
* @bank: memory bank number (0-3)
|
|
*
|
|
* Return the powerdomain @pwrdm's current memory power state for bank
|
|
* @bank. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
|
|
* the target memory bank does not exist or is not controllable, or
|
|
* returns the current memory power state upon success.
|
|
*/
|
|
int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
u32 m;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (pwrdm->banks < (bank + 1))
|
|
return -EEXIST;
|
|
|
|
if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
|
|
bank = 1;
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
switch (bank) {
|
|
case 0:
|
|
m = OMAP_MEM0_STATEST_MASK;
|
|
break;
|
|
case 1:
|
|
m = OMAP_MEM1_STATEST_MASK;
|
|
break;
|
|
case 2:
|
|
m = OMAP_MEM2_STATEST_MASK;
|
|
break;
|
|
case 3:
|
|
m = OMAP_MEM3_STATEST_MASK;
|
|
break;
|
|
case 4:
|
|
m = OMAP_MEM4_STATEST_MASK;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* should never happen */
|
|
return -EEXIST;
|
|
}
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
|
|
pwrstst_reg_offs, m);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_prev_mem_pwrst - get previous memory bank power state
|
|
* @pwrdm: struct powerdomain * to get previous memory bank power state
|
|
* @bank: memory bank number (0-3)
|
|
*
|
|
* Return the powerdomain @pwrdm's previous memory power state for
|
|
* bank @bank. Returns -EINVAL if the powerdomain pointer is null,
|
|
* -EEXIST if the target memory bank does not exist or is not
|
|
* controllable, or returns the previous memory power state upon
|
|
* success.
|
|
*/
|
|
int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
u32 m;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (pwrdm->banks < (bank + 1))
|
|
return -EEXIST;
|
|
|
|
if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
|
|
bank = 1;
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
switch (bank) {
|
|
case 0:
|
|
m = OMAP3430_LASTMEM1STATEENTERED_MASK;
|
|
break;
|
|
case 1:
|
|
m = OMAP3430_LASTMEM2STATEENTERED_MASK;
|
|
break;
|
|
case 2:
|
|
m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
|
|
break;
|
|
case 3:
|
|
m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* should never happen */
|
|
return -EEXIST;
|
|
}
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
|
|
OMAP3430_PM_PREPWSTST, m);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_read_mem_retst - get next memory bank power state
|
|
* @pwrdm: struct powerdomain * to get mext memory bank power state
|
|
* @bank: memory bank number (0-3)
|
|
*
|
|
* Return the powerdomain pwrdm's next memory power state for bank
|
|
* x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
|
|
* the target memory bank does not exist or is not controllable, or
|
|
* returns the next memory power state upon success.
|
|
*/
|
|
int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
u32 m;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (pwrdm->banks < (bank + 1))
|
|
return -EEXIST;
|
|
|
|
/*
|
|
* The register bit names below may not correspond to the
|
|
* actual names of the bits in each powerdomain's register,
|
|
* but the type of value returned is the same for each
|
|
* powerdomain.
|
|
*/
|
|
switch (bank) {
|
|
case 0:
|
|
m = OMAP_MEM0_RETSTATE_MASK;
|
|
break;
|
|
case 1:
|
|
m = OMAP_MEM1_RETSTATE_MASK;
|
|
break;
|
|
case 2:
|
|
m = OMAP_MEM2_RETSTATE_MASK;
|
|
break;
|
|
case 3:
|
|
m = OMAP_MEM3_RETSTATE_MASK;
|
|
break;
|
|
case 4:
|
|
m = OMAP_MEM4_RETSTATE_MASK;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* should never happen */
|
|
return -EEXIST;
|
|
}
|
|
|
|
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
|
|
pwrstctrl_reg_offs, m);
|
|
}
|
|
|
|
/**
|
|
* pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
|
|
* @pwrdm: struct powerdomain * to clear
|
|
*
|
|
* Clear the powerdomain's previous power state register @pwrdm.
|
|
* Clears the entire register, including logic and memory bank
|
|
* previous power states. Returns -EINVAL if the powerdomain pointer
|
|
* is null, or returns 0 upon success.
|
|
*/
|
|
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* XXX should get the powerdomain's current state here;
|
|
* warn & fail if it is not ON.
|
|
*/
|
|
|
|
pr_debug("powerdomain: clearing previous power state reg for %s\n",
|
|
pwrdm->name);
|
|
|
|
prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm
|
|
* @pwrdm: struct powerdomain *
|
|
*
|
|
* Enable automatic context save-and-restore upon power state change
|
|
* for some devices in the powerdomain @pwrdm. Warning: this only
|
|
* affects a subset of devices in a powerdomain; check the TRM
|
|
* closely. Returns -EINVAL if the powerdomain pointer is null or if
|
|
* the powerdomain does not support automatic save-and-restore, or
|
|
* returns 0 upon success.
|
|
*/
|
|
int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
|
|
pwrdm->name);
|
|
|
|
prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm
|
|
* @pwrdm: struct powerdomain *
|
|
*
|
|
* Disable automatic context save-and-restore upon power state change
|
|
* for some devices in the powerdomain @pwrdm. Warning: this only
|
|
* affects a subset of devices in a powerdomain; check the TRM
|
|
* closely. Returns -EINVAL if the powerdomain pointer is null or if
|
|
* the powerdomain does not support automatic save-and-restore, or
|
|
* returns 0 upon success.
|
|
*/
|
|
int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
|
|
pwrdm->name);
|
|
|
|
prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
|
|
* @pwrdm: struct powerdomain *
|
|
*
|
|
* Returns 1 if powerdomain @pwrdm supports hardware save-and-restore
|
|
* for some devices, or 0 if it does not.
|
|
*/
|
|
bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
|
|
{
|
|
return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_set_lowpwrstchange - Request a low power state change
|
|
* @pwrdm: struct powerdomain *
|
|
*
|
|
* Allows a powerdomain to transtion to a lower power sleep state
|
|
* from an existing sleep state without waking up the powerdomain.
|
|
* Returns -EINVAL if the powerdomain pointer is null or if the
|
|
* powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
|
|
* upon success.
|
|
*/
|
|
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
|
|
{
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE))
|
|
return -EINVAL;
|
|
|
|
pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
|
|
pwrdm->name);
|
|
|
|
prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
|
|
(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
|
|
pwrdm->prcm_offs, pwrstctrl_reg_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pwrdm_wait_transition - wait for powerdomain power transition to finish
|
|
* @pwrdm: struct powerdomain * to wait for
|
|
*
|
|
* If the powerdomain @pwrdm is in the process of a state transition,
|
|
* spin until it completes the power transition, or until an iteration
|
|
* bailout value is reached. Returns -EINVAL if the powerdomain
|
|
* pointer is null, -EAGAIN if the bailout value was reached, or
|
|
* returns 0 upon success.
|
|
*/
|
|
int pwrdm_wait_transition(struct powerdomain *pwrdm)
|
|
{
|
|
u32 c = 0;
|
|
|
|
if (!pwrdm)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* REVISIT: pwrdm_wait_transition() may be better implemented
|
|
* via a callback and a periodic timer check -- how long do we expect
|
|
* powerdomain transitions to take?
|
|
*/
|
|
|
|
/* XXX Is this udelay() value meaningful? */
|
|
while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
|
|
OMAP_INTRANSITION_MASK) &&
|
|
(c++ < PWRDM_TRANSITION_BAILOUT))
|
|
udelay(1);
|
|
|
|
if (c > PWRDM_TRANSITION_BAILOUT) {
|
|
printk(KERN_ERR "powerdomain: waited too long for "
|
|
"powerdomain %s to complete transition\n", pwrdm->name);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
pr_debug("powerdomain: completed transition in %d loops\n", c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pwrdm_state_switch(struct powerdomain *pwrdm)
|
|
{
|
|
return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
|
|
}
|
|
|
|
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
|
|
{
|
|
if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
|
|
pwrdm_wait_transition(clkdm->pwrdm.ptr);
|
|
return pwrdm_state_switch(clkdm->pwrdm.ptr);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
int pwrdm_pre_transition(void)
|
|
{
|
|
pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
|
|
return 0;
|
|
}
|
|
|
|
int pwrdm_post_transition(void)
|
|
{
|
|
pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
|
|
return 0;
|
|
}
|
|
|