linux/samples/pktgen/pktgen_sample06_numa_awared...

109 lines
3.4 KiB
Bash
Executable File

#!/bin/bash
#
# Multiqueue: Using pktgen threads for sending on multiple CPUs
# * adding devices to kernel threads which are in the same NUMA node
# * bound devices queue's irq affinity to the threads, 1:1 mapping
# * notice the naming scheme for keeping device names unique
# * nameing scheme: dev@thread_number
# * flow variation via random UDP source port
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"
#
# Required param: -i dev in $DEV
source ${basedir}/parameters.sh
# Base Config
DELAY="0" # Zero means max speed
[ -z "$COUNT" ] && COUNT="20000000" # Zero means indefinitely
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
# Flow variation random source port between min and max
UDP_MIN=9
UDP_MAX=109
node=`get_iface_node $DEV`
irq_array=(`get_iface_irqs $DEV`)
cpu_array=(`get_node_cpus $node`)
[ $THREADS -gt ${#irq_array[*]} -o $THREADS -gt ${#cpu_array[*]} ] && \
err 1 "Thread number $THREADS exceeds: min (${#irq_array[*]},${#cpu_array[*]})"
# (example of setting default params in your script)
if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
if [ -n "$DST_PORT" ]; then
read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $DST_MIN $DST_MAX
fi
# General cleanup everything since last run
pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((i = 0; i < $THREADS; i++)); do
# The device name is extended with @name, using thread number to
# make then unique, but any name will do.
# Set the queue's irq affinity to this $thread (processor)
# if '-f' is designated, offset cpu id
thread=${cpu_array[$((i+F_THREAD))]}
dev=${DEV}@${thread}
echo $thread > /proc/irq/${irq_array[$i]}/smp_affinity_list
info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`"
# Add remove all other devices and add_device $dev to thread
pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# select queue and bind the queue and $dev in 1:1 relationship
queue_num=$i
info "queue number is $queue_num"
pg_set $dev "queue_map_min $queue_num"
pg_set $dev "queue_map_max $queue_num"
# Notice config queue to map to cpu (mirrors smp_processor_id())
# It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number
pg_set $dev "flag QUEUE_MAP_CPU"
# Base config of dev
pg_set $dev "count $COUNT"
pg_set $dev "clone_skb $CLONE_SKB"
pg_set $dev "pkt_size $PKT_SIZE"
pg_set $dev "delay $DELAY"
# Flag example disabling timestamping
pg_set $dev "flag NO_TIMESTAMP"
# Destination
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
pg_set $dev "flag UDPDST_RND"
pg_set $dev "udp_dst_min $DST_MIN"
pg_set $dev "udp_dst_max $DST_MAX"
fi
# Setup random UDP port src range
pg_set $dev "flag UDPSRC_RND"
pg_set $dev "udp_src_min $UDP_MIN"
pg_set $dev "udp_src_max $UDP_MAX"
done
# start_run
echo "Running... ctrl^C to stop" >&2
pg_ctrl "start"
echo "Done" >&2
# Print results
for ((i = 0; i < $THREADS; i++)); do
thread=${cpu_array[$((i+F_THREAD))]}
dev=${DEV}@${thread}
echo "Device: $dev"
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
done