7b594131c4
If the fcport is not online then we do not want to block IO to all ports on the host. We just want to stop IO on port not online, so we should be using the SCSI_MLQUEUE_TARGET_BUSY return value. For the case where we race with the rport memset initialization we do not want the queuecommand to be called again so we can just use SCSI_MLQUEUE_TARGET_BUSY for this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2942 lines
75 KiB
C
2942 lines
75 KiB
C
/*
|
|
* QLogic Fibre Channel HBA Driver
|
|
* Copyright (c) 2003-2008 QLogic Corporation
|
|
*
|
|
* See LICENSE.qla2xxx for copyright and licensing details.
|
|
*/
|
|
#include "qla_def.h"
|
|
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsicam.h>
|
|
#include <scsi/scsi_transport.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
|
|
/*
|
|
* Driver version
|
|
*/
|
|
char qla2x00_version_str[40];
|
|
|
|
/*
|
|
* SRB allocation cache
|
|
*/
|
|
static struct kmem_cache *srb_cachep;
|
|
|
|
int ql2xlogintimeout = 20;
|
|
module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(ql2xlogintimeout,
|
|
"Login timeout value in seconds.");
|
|
|
|
int qlport_down_retry;
|
|
module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(qlport_down_retry,
|
|
"Maximum number of command retries to a port that returns "
|
|
"a PORT-DOWN status.");
|
|
|
|
int ql2xplogiabsentdevice;
|
|
module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(ql2xplogiabsentdevice,
|
|
"Option to enable PLOGI to devices that are not present after "
|
|
"a Fabric scan. This is needed for several broken switches. "
|
|
"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
|
|
|
|
int ql2xloginretrycount = 0;
|
|
module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(ql2xloginretrycount,
|
|
"Specify an alternate value for the NVRAM login retry count.");
|
|
|
|
int ql2xallocfwdump = 1;
|
|
module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(ql2xallocfwdump,
|
|
"Option to enable allocation of memory for a firmware dump "
|
|
"during HBA initialization. Memory allocation requirements "
|
|
"vary by ISP type. Default is 1 - allocate memory.");
|
|
|
|
int ql2xextended_error_logging;
|
|
module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(ql2xextended_error_logging,
|
|
"Option to enable extended error logging, "
|
|
"Default is 0 - no logging. 1 - log errors.");
|
|
|
|
static void qla2x00_free_device(scsi_qla_host_t *);
|
|
|
|
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
|
|
|
|
int ql2xfdmienable=1;
|
|
module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(ql2xfdmienable,
|
|
"Enables FDMI registratons "
|
|
"Default is 0 - no FDMI. 1 - perfom FDMI.");
|
|
|
|
#define MAX_Q_DEPTH 32
|
|
static int ql2xmaxqdepth = MAX_Q_DEPTH;
|
|
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(ql2xmaxqdepth,
|
|
"Maximum queue depth to report for target devices.");
|
|
|
|
int ql2xqfullrampup = 120;
|
|
module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(ql2xqfullrampup,
|
|
"Number of seconds to wait to begin to ramp-up the queue "
|
|
"depth for a device after a queue-full condition has been "
|
|
"detected. Default is 120 seconds.");
|
|
|
|
int ql2xiidmaenable=1;
|
|
module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
|
|
MODULE_PARM_DESC(ql2xiidmaenable,
|
|
"Enables iIDMA settings "
|
|
"Default is 1 - perform iIDMA. 0 - no iIDMA.");
|
|
|
|
|
|
/*
|
|
* SCSI host template entry points
|
|
*/
|
|
static int qla2xxx_slave_configure(struct scsi_device * device);
|
|
static int qla2xxx_slave_alloc(struct scsi_device *);
|
|
static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
|
|
static void qla2xxx_scan_start(struct Scsi_Host *);
|
|
static void qla2xxx_slave_destroy(struct scsi_device *);
|
|
static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
|
|
void (*fn)(struct scsi_cmnd *));
|
|
static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
|
|
void (*fn)(struct scsi_cmnd *));
|
|
static int qla2xxx_eh_abort(struct scsi_cmnd *);
|
|
static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
|
|
static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
|
|
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
|
|
static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
|
|
|
|
static int qla2x00_change_queue_depth(struct scsi_device *, int);
|
|
static int qla2x00_change_queue_type(struct scsi_device *, int);
|
|
|
|
static struct scsi_host_template qla2x00_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.name = QLA2XXX_DRIVER_NAME,
|
|
.queuecommand = qla2x00_queuecommand,
|
|
|
|
.eh_abort_handler = qla2xxx_eh_abort,
|
|
.eh_device_reset_handler = qla2xxx_eh_device_reset,
|
|
.eh_target_reset_handler = qla2xxx_eh_target_reset,
|
|
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
|
|
.eh_host_reset_handler = qla2xxx_eh_host_reset,
|
|
|
|
.slave_configure = qla2xxx_slave_configure,
|
|
|
|
.slave_alloc = qla2xxx_slave_alloc,
|
|
.slave_destroy = qla2xxx_slave_destroy,
|
|
.scan_finished = qla2xxx_scan_finished,
|
|
.scan_start = qla2xxx_scan_start,
|
|
.change_queue_depth = qla2x00_change_queue_depth,
|
|
.change_queue_type = qla2x00_change_queue_type,
|
|
.this_id = -1,
|
|
.cmd_per_lun = 3,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.sg_tablesize = SG_ALL,
|
|
|
|
/*
|
|
* The RISC allows for each command to transfer (2^32-1) bytes of data,
|
|
* which equates to 0x800000 sectors.
|
|
*/
|
|
.max_sectors = 0xFFFF,
|
|
.shost_attrs = qla2x00_host_attrs,
|
|
};
|
|
|
|
struct scsi_host_template qla24xx_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.name = QLA2XXX_DRIVER_NAME,
|
|
.queuecommand = qla24xx_queuecommand,
|
|
|
|
.eh_abort_handler = qla2xxx_eh_abort,
|
|
.eh_device_reset_handler = qla2xxx_eh_device_reset,
|
|
.eh_target_reset_handler = qla2xxx_eh_target_reset,
|
|
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
|
|
.eh_host_reset_handler = qla2xxx_eh_host_reset,
|
|
|
|
.slave_configure = qla2xxx_slave_configure,
|
|
|
|
.slave_alloc = qla2xxx_slave_alloc,
|
|
.slave_destroy = qla2xxx_slave_destroy,
|
|
.scan_finished = qla2xxx_scan_finished,
|
|
.scan_start = qla2xxx_scan_start,
|
|
.change_queue_depth = qla2x00_change_queue_depth,
|
|
.change_queue_type = qla2x00_change_queue_type,
|
|
.this_id = -1,
|
|
.cmd_per_lun = 3,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.sg_tablesize = SG_ALL,
|
|
|
|
.max_sectors = 0xFFFF,
|
|
.shost_attrs = qla2x00_host_attrs,
|
|
};
|
|
|
|
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
|
|
struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
|
|
|
|
/* TODO Convert to inlines
|
|
*
|
|
* Timer routines
|
|
*/
|
|
|
|
__inline__ void
|
|
qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
|
|
{
|
|
init_timer(&ha->timer);
|
|
ha->timer.expires = jiffies + interval * HZ;
|
|
ha->timer.data = (unsigned long)ha;
|
|
ha->timer.function = (void (*)(unsigned long))func;
|
|
add_timer(&ha->timer);
|
|
ha->timer_active = 1;
|
|
}
|
|
|
|
static inline void
|
|
qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
|
|
{
|
|
mod_timer(&ha->timer, jiffies + interval * HZ);
|
|
}
|
|
|
|
static __inline__ void
|
|
qla2x00_stop_timer(scsi_qla_host_t *ha)
|
|
{
|
|
del_timer_sync(&ha->timer);
|
|
ha->timer_active = 0;
|
|
}
|
|
|
|
static int qla2x00_do_dpc(void *data);
|
|
|
|
static void qla2x00_rst_aen(scsi_qla_host_t *);
|
|
|
|
static int qla2x00_mem_alloc(scsi_qla_host_t *);
|
|
static void qla2x00_mem_free(scsi_qla_host_t *ha);
|
|
static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static char *
|
|
qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
|
|
{
|
|
static char *pci_bus_modes[] = {
|
|
"33", "66", "100", "133",
|
|
};
|
|
uint16_t pci_bus;
|
|
|
|
strcpy(str, "PCI");
|
|
pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
|
|
if (pci_bus) {
|
|
strcat(str, "-X (");
|
|
strcat(str, pci_bus_modes[pci_bus]);
|
|
} else {
|
|
pci_bus = (ha->pci_attr & BIT_8) >> 8;
|
|
strcat(str, " (");
|
|
strcat(str, pci_bus_modes[pci_bus]);
|
|
}
|
|
strcat(str, " MHz)");
|
|
|
|
return (str);
|
|
}
|
|
|
|
static char *
|
|
qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
|
|
{
|
|
static char *pci_bus_modes[] = { "33", "66", "100", "133", };
|
|
uint32_t pci_bus;
|
|
int pcie_reg;
|
|
|
|
pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
|
|
if (pcie_reg) {
|
|
char lwstr[6];
|
|
uint16_t pcie_lstat, lspeed, lwidth;
|
|
|
|
pcie_reg += 0x12;
|
|
pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
|
|
lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
|
|
lwidth = (pcie_lstat &
|
|
(BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
|
|
|
|
strcpy(str, "PCIe (");
|
|
if (lspeed == 1)
|
|
strcat(str, "2.5GT/s ");
|
|
else if (lspeed == 2)
|
|
strcat(str, "5.0GT/s ");
|
|
else
|
|
strcat(str, "<unknown> ");
|
|
snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
|
|
strcat(str, lwstr);
|
|
|
|
return str;
|
|
}
|
|
|
|
strcpy(str, "PCI");
|
|
pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
|
|
if (pci_bus == 0 || pci_bus == 8) {
|
|
strcat(str, " (");
|
|
strcat(str, pci_bus_modes[pci_bus >> 3]);
|
|
} else {
|
|
strcat(str, "-X ");
|
|
if (pci_bus & BIT_2)
|
|
strcat(str, "Mode 2");
|
|
else
|
|
strcat(str, "Mode 1");
|
|
strcat(str, " (");
|
|
strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
|
|
}
|
|
strcat(str, " MHz)");
|
|
|
|
return str;
|
|
}
|
|
|
|
static char *
|
|
qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
|
|
{
|
|
char un_str[10];
|
|
|
|
sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
|
|
ha->fw_minor_version,
|
|
ha->fw_subminor_version);
|
|
|
|
if (ha->fw_attributes & BIT_9) {
|
|
strcat(str, "FLX");
|
|
return (str);
|
|
}
|
|
|
|
switch (ha->fw_attributes & 0xFF) {
|
|
case 0x7:
|
|
strcat(str, "EF");
|
|
break;
|
|
case 0x17:
|
|
strcat(str, "TP");
|
|
break;
|
|
case 0x37:
|
|
strcat(str, "IP");
|
|
break;
|
|
case 0x77:
|
|
strcat(str, "VI");
|
|
break;
|
|
default:
|
|
sprintf(un_str, "(%x)", ha->fw_attributes);
|
|
strcat(str, un_str);
|
|
break;
|
|
}
|
|
if (ha->fw_attributes & 0x100)
|
|
strcat(str, "X");
|
|
|
|
return (str);
|
|
}
|
|
|
|
static char *
|
|
qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
|
|
{
|
|
sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
|
|
ha->fw_minor_version,
|
|
ha->fw_subminor_version);
|
|
|
|
if (ha->fw_attributes & BIT_0)
|
|
strcat(str, "[Class 2] ");
|
|
if (ha->fw_attributes & BIT_1)
|
|
strcat(str, "[IP] ");
|
|
if (ha->fw_attributes & BIT_2)
|
|
strcat(str, "[Multi-ID] ");
|
|
if (ha->fw_attributes & BIT_3)
|
|
strcat(str, "[SB-2] ");
|
|
if (ha->fw_attributes & BIT_4)
|
|
strcat(str, "[T10 CRC] ");
|
|
if (ha->fw_attributes & BIT_5)
|
|
strcat(str, "[VI] ");
|
|
if (ha->fw_attributes & BIT_10)
|
|
strcat(str, "[84XX] ");
|
|
if (ha->fw_attributes & BIT_13)
|
|
strcat(str, "[Experimental]");
|
|
return str;
|
|
}
|
|
|
|
static inline srb_t *
|
|
qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
|
|
struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
srb_t *sp;
|
|
|
|
sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
|
|
if (!sp)
|
|
return sp;
|
|
|
|
sp->ha = ha;
|
|
sp->fcport = fcport;
|
|
sp->cmd = cmd;
|
|
sp->flags = 0;
|
|
CMD_SP(cmd) = (void *)sp;
|
|
cmd->scsi_done = done;
|
|
|
|
return sp;
|
|
}
|
|
|
|
static int
|
|
qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
|
|
struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
|
|
srb_t *sp;
|
|
int rval;
|
|
|
|
if (unlikely(pci_channel_offline(ha->pdev))) {
|
|
cmd->result = DID_REQUEUE << 16;
|
|
goto qc_fail_command;
|
|
}
|
|
|
|
rval = fc_remote_port_chkready(rport);
|
|
if (rval) {
|
|
cmd->result = rval;
|
|
goto qc_fail_command;
|
|
}
|
|
|
|
/* Close window on fcport/rport state-transitioning. */
|
|
if (fcport->drport)
|
|
goto qc_target_busy;
|
|
|
|
if (atomic_read(&fcport->state) != FCS_ONLINE) {
|
|
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
|
|
atomic_read(&ha->loop_state) == LOOP_DEAD) {
|
|
cmd->result = DID_NO_CONNECT << 16;
|
|
goto qc_fail_command;
|
|
}
|
|
goto qc_target_busy;
|
|
}
|
|
|
|
spin_unlock_irq(ha->host->host_lock);
|
|
|
|
sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
|
|
if (!sp)
|
|
goto qc_host_busy_lock;
|
|
|
|
rval = qla2x00_start_scsi(sp);
|
|
if (rval != QLA_SUCCESS)
|
|
goto qc_host_busy_free_sp;
|
|
|
|
spin_lock_irq(ha->host->host_lock);
|
|
|
|
return 0;
|
|
|
|
qc_host_busy_free_sp:
|
|
qla2x00_sp_free_dma(ha, sp);
|
|
mempool_free(sp, ha->srb_mempool);
|
|
|
|
qc_host_busy_lock:
|
|
spin_lock_irq(ha->host->host_lock);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
qc_target_busy:
|
|
return SCSI_MLQUEUE_TARGET_BUSY;
|
|
|
|
qc_fail_command:
|
|
done(cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
|
|
struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
|
|
srb_t *sp;
|
|
int rval;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
if (unlikely(pci_channel_offline(pha->pdev))) {
|
|
cmd->result = DID_REQUEUE << 16;
|
|
goto qc24_fail_command;
|
|
}
|
|
|
|
rval = fc_remote_port_chkready(rport);
|
|
if (rval) {
|
|
cmd->result = rval;
|
|
goto qc24_fail_command;
|
|
}
|
|
|
|
/* Close window on fcport/rport state-transitioning. */
|
|
if (fcport->drport)
|
|
goto qc24_target_busy;
|
|
|
|
if (atomic_read(&fcport->state) != FCS_ONLINE) {
|
|
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
|
|
atomic_read(&pha->loop_state) == LOOP_DEAD) {
|
|
cmd->result = DID_NO_CONNECT << 16;
|
|
goto qc24_fail_command;
|
|
}
|
|
goto qc24_target_busy;
|
|
}
|
|
|
|
spin_unlock_irq(ha->host->host_lock);
|
|
|
|
sp = qla2x00_get_new_sp(pha, fcport, cmd, done);
|
|
if (!sp)
|
|
goto qc24_host_busy_lock;
|
|
|
|
rval = qla24xx_start_scsi(sp);
|
|
if (rval != QLA_SUCCESS)
|
|
goto qc24_host_busy_free_sp;
|
|
|
|
spin_lock_irq(ha->host->host_lock);
|
|
|
|
return 0;
|
|
|
|
qc24_host_busy_free_sp:
|
|
qla2x00_sp_free_dma(pha, sp);
|
|
mempool_free(sp, pha->srb_mempool);
|
|
|
|
qc24_host_busy_lock:
|
|
spin_lock_irq(ha->host->host_lock);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
qc24_target_busy:
|
|
return SCSI_MLQUEUE_TARGET_BUSY;
|
|
|
|
qc24_fail_command:
|
|
done(cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* qla2x00_eh_wait_on_command
|
|
* Waits for the command to be returned by the Firmware for some
|
|
* max time.
|
|
*
|
|
* Input:
|
|
* ha = actual ha whose done queue will contain the command
|
|
* returned by firmware.
|
|
* cmd = Scsi Command to wait on.
|
|
* flag = Abort/Reset(Bus or Device Reset)
|
|
*
|
|
* Return:
|
|
* Not Found : 0
|
|
* Found : 1
|
|
*/
|
|
static int
|
|
qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
|
|
{
|
|
#define ABORT_POLLING_PERIOD 1000
|
|
#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
|
|
unsigned long wait_iter = ABORT_WAIT_ITER;
|
|
int ret = QLA_SUCCESS;
|
|
|
|
while (CMD_SP(cmd)) {
|
|
msleep(ABORT_POLLING_PERIOD);
|
|
|
|
if (--wait_iter)
|
|
break;
|
|
}
|
|
if (CMD_SP(cmd))
|
|
ret = QLA_FUNCTION_FAILED;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* qla2x00_wait_for_hba_online
|
|
* Wait till the HBA is online after going through
|
|
* <= MAX_RETRIES_OF_ISP_ABORT or
|
|
* finally HBA is disabled ie marked offline
|
|
*
|
|
* Input:
|
|
* ha - pointer to host adapter structure
|
|
*
|
|
* Note:
|
|
* Does context switching-Release SPIN_LOCK
|
|
* (if any) before calling this routine.
|
|
*
|
|
* Return:
|
|
* Success (Adapter is online) : 0
|
|
* Failed (Adapter is offline/disabled) : 1
|
|
*/
|
|
int
|
|
qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
|
|
{
|
|
int return_status;
|
|
unsigned long wait_online;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
|
|
while (((test_bit(ISP_ABORT_NEEDED, &pha->dpc_flags)) ||
|
|
test_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags) ||
|
|
test_bit(ISP_ABORT_RETRY, &pha->dpc_flags) ||
|
|
pha->dpc_active) && time_before(jiffies, wait_online)) {
|
|
|
|
msleep(1000);
|
|
}
|
|
if (pha->flags.online)
|
|
return_status = QLA_SUCCESS;
|
|
else
|
|
return_status = QLA_FUNCTION_FAILED;
|
|
|
|
return (return_status);
|
|
}
|
|
|
|
/*
|
|
* qla2x00_wait_for_loop_ready
|
|
* Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
|
|
* to be in LOOP_READY state.
|
|
* Input:
|
|
* ha - pointer to host adapter structure
|
|
*
|
|
* Note:
|
|
* Does context switching-Release SPIN_LOCK
|
|
* (if any) before calling this routine.
|
|
*
|
|
*
|
|
* Return:
|
|
* Success (LOOP_READY) : 0
|
|
* Failed (LOOP_NOT_READY) : 1
|
|
*/
|
|
static inline int
|
|
qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
|
|
{
|
|
int return_status = QLA_SUCCESS;
|
|
unsigned long loop_timeout ;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
/* wait for 5 min at the max for loop to be ready */
|
|
loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
|
|
|
|
while ((!atomic_read(&pha->loop_down_timer) &&
|
|
atomic_read(&pha->loop_state) == LOOP_DOWN) ||
|
|
atomic_read(&pha->loop_state) != LOOP_READY) {
|
|
if (atomic_read(&pha->loop_state) == LOOP_DEAD) {
|
|
return_status = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
msleep(1000);
|
|
if (time_after_eq(jiffies, loop_timeout)) {
|
|
return_status = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
}
|
|
return (return_status);
|
|
}
|
|
|
|
void
|
|
qla2x00_abort_fcport_cmds(fc_port_t *fcport)
|
|
{
|
|
int cnt;
|
|
unsigned long flags;
|
|
srb_t *sp;
|
|
scsi_qla_host_t *ha = fcport->ha;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
|
|
sp = pha->outstanding_cmds[cnt];
|
|
if (!sp)
|
|
continue;
|
|
if (sp->fcport != fcport)
|
|
continue;
|
|
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
if (ha->isp_ops->abort_command(ha, sp)) {
|
|
DEBUG2(qla_printk(KERN_WARNING, ha,
|
|
"Abort failed -- %lx\n", sp->cmd->serial_number));
|
|
} else {
|
|
if (qla2x00_eh_wait_on_command(ha, sp->cmd) !=
|
|
QLA_SUCCESS)
|
|
DEBUG2(qla_printk(KERN_WARNING, ha,
|
|
"Abort failed while waiting -- %lx\n",
|
|
sp->cmd->serial_number));
|
|
|
|
}
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
}
|
|
|
|
static void
|
|
qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
|
|
{
|
|
struct Scsi_Host *shost = cmnd->device->host;
|
|
struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(shost->host_lock, flags);
|
|
while (rport->port_state == FC_PORTSTATE_BLOCKED) {
|
|
spin_unlock_irqrestore(shost->host_lock, flags);
|
|
msleep(1000);
|
|
spin_lock_irqsave(shost->host_lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(shost->host_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* qla2xxx_eh_abort
|
|
*
|
|
* Description:
|
|
* The abort function will abort the specified command.
|
|
*
|
|
* Input:
|
|
* cmd = Linux SCSI command packet to be aborted.
|
|
*
|
|
* Returns:
|
|
* Either SUCCESS or FAILED.
|
|
*
|
|
* Note:
|
|
* Only return FAILED if command not returned by firmware.
|
|
**************************************************************************/
|
|
static int
|
|
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
srb_t *sp;
|
|
int ret, i;
|
|
unsigned int id, lun;
|
|
unsigned long serial;
|
|
unsigned long flags;
|
|
int wait = 0;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
qla2x00_block_error_handler(cmd);
|
|
|
|
if (!CMD_SP(cmd))
|
|
return SUCCESS;
|
|
|
|
ret = SUCCESS;
|
|
|
|
id = cmd->device->id;
|
|
lun = cmd->device->lun;
|
|
serial = cmd->serial_number;
|
|
|
|
/* Check active list for command command. */
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
|
|
sp = pha->outstanding_cmds[i];
|
|
|
|
if (sp == NULL)
|
|
continue;
|
|
|
|
if (sp->cmd != cmd)
|
|
continue;
|
|
|
|
DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
|
|
__func__, ha->host_no, sp, serial));
|
|
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
if (ha->isp_ops->abort_command(ha, sp)) {
|
|
DEBUG2(printk("%s(%ld): abort_command "
|
|
"mbx failed.\n", __func__, ha->host_no));
|
|
} else {
|
|
DEBUG3(printk("%s(%ld): abort_command "
|
|
"mbx success.\n", __func__, ha->host_no));
|
|
wait = 1;
|
|
}
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
|
|
/* Wait for the command to be returned. */
|
|
if (wait) {
|
|
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
|
|
qla_printk(KERN_ERR, ha,
|
|
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
|
|
"%x.\n", ha->host_no, id, lun, serial, ret);
|
|
ret = FAILED;
|
|
}
|
|
}
|
|
|
|
qla_printk(KERN_INFO, ha,
|
|
"scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
|
|
ha->host_no, id, lun, wait, serial, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
enum nexus_wait_type {
|
|
WAIT_HOST = 0,
|
|
WAIT_TARGET,
|
|
WAIT_LUN,
|
|
};
|
|
|
|
static int
|
|
qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
|
|
unsigned int l, enum nexus_wait_type type)
|
|
{
|
|
int cnt, match, status;
|
|
srb_t *sp;
|
|
unsigned long flags;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
status = QLA_SUCCESS;
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
for (cnt = 1; status == QLA_SUCCESS && cnt < MAX_OUTSTANDING_COMMANDS;
|
|
cnt++) {
|
|
sp = pha->outstanding_cmds[cnt];
|
|
if (!sp)
|
|
continue;
|
|
|
|
if (ha->vp_idx != sp->fcport->ha->vp_idx)
|
|
continue;
|
|
match = 0;
|
|
switch (type) {
|
|
case WAIT_HOST:
|
|
match = 1;
|
|
break;
|
|
case WAIT_TARGET:
|
|
match = sp->cmd->device->id == t;
|
|
break;
|
|
case WAIT_LUN:
|
|
match = (sp->cmd->device->id == t &&
|
|
sp->cmd->device->lun == l);
|
|
break;
|
|
}
|
|
if (!match)
|
|
continue;
|
|
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
status = qla2x00_eh_wait_on_command(ha, sp->cmd);
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static char *reset_errors[] = {
|
|
"HBA not online",
|
|
"HBA not ready",
|
|
"Task management failed",
|
|
"Waiting for command completions",
|
|
};
|
|
|
|
static int
|
|
__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
|
|
struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
|
|
int err;
|
|
|
|
qla2x00_block_error_handler(cmd);
|
|
|
|
if (!fcport)
|
|
return FAILED;
|
|
|
|
qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
|
|
ha->host_no, cmd->device->id, cmd->device->lun, name);
|
|
|
|
err = 0;
|
|
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
|
|
goto eh_reset_failed;
|
|
err = 1;
|
|
if (qla2x00_wait_for_loop_ready(ha) != QLA_SUCCESS)
|
|
goto eh_reset_failed;
|
|
err = 2;
|
|
if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
|
|
goto eh_reset_failed;
|
|
err = 3;
|
|
if (qla2x00_eh_wait_for_pending_commands(ha, cmd->device->id,
|
|
cmd->device->lun, type) != QLA_SUCCESS)
|
|
goto eh_reset_failed;
|
|
|
|
qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET SUCCEEDED.\n",
|
|
ha->host_no, cmd->device->id, cmd->device->lun, name);
|
|
|
|
return SUCCESS;
|
|
|
|
eh_reset_failed:
|
|
qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET FAILED: %s.\n",
|
|
ha->host_no, cmd->device->id, cmd->device->lun, name,
|
|
reset_errors[err]);
|
|
return FAILED;
|
|
}
|
|
|
|
static int
|
|
qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
|
|
return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
|
|
ha->isp_ops->lun_reset);
|
|
}
|
|
|
|
static int
|
|
qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
|
|
return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
|
|
ha->isp_ops->target_reset);
|
|
}
|
|
|
|
/**************************************************************************
|
|
* qla2xxx_eh_bus_reset
|
|
*
|
|
* Description:
|
|
* The bus reset function will reset the bus and abort any executing
|
|
* commands.
|
|
*
|
|
* Input:
|
|
* cmd = Linux SCSI command packet of the command that cause the
|
|
* bus reset.
|
|
*
|
|
* Returns:
|
|
* SUCCESS/FAILURE (defined as macro in scsi.h).
|
|
*
|
|
**************************************************************************/
|
|
static int
|
|
qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
|
|
int ret = FAILED;
|
|
unsigned int id, lun;
|
|
unsigned long serial;
|
|
|
|
qla2x00_block_error_handler(cmd);
|
|
|
|
id = cmd->device->id;
|
|
lun = cmd->device->lun;
|
|
serial = cmd->serial_number;
|
|
|
|
if (!fcport)
|
|
return ret;
|
|
|
|
qla_printk(KERN_INFO, ha,
|
|
"scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
|
|
|
|
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
|
|
DEBUG2(printk("%s failed:board disabled\n",__func__));
|
|
goto eh_bus_reset_done;
|
|
}
|
|
|
|
if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
|
|
if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
|
|
ret = SUCCESS;
|
|
}
|
|
if (ret == FAILED)
|
|
goto eh_bus_reset_done;
|
|
|
|
/* Flush outstanding commands. */
|
|
if (qla2x00_eh_wait_for_pending_commands(pha, 0, 0, WAIT_HOST) !=
|
|
QLA_SUCCESS)
|
|
ret = FAILED;
|
|
|
|
eh_bus_reset_done:
|
|
qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
|
|
(ret == FAILED) ? "failed" : "succeded");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**************************************************************************
|
|
* qla2xxx_eh_host_reset
|
|
*
|
|
* Description:
|
|
* The reset function will reset the Adapter.
|
|
*
|
|
* Input:
|
|
* cmd = Linux SCSI command packet of the command that cause the
|
|
* adapter reset.
|
|
*
|
|
* Returns:
|
|
* Either SUCCESS or FAILED.
|
|
*
|
|
* Note:
|
|
**************************************************************************/
|
|
static int
|
|
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
|
|
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
|
|
int ret = FAILED;
|
|
unsigned int id, lun;
|
|
unsigned long serial;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
qla2x00_block_error_handler(cmd);
|
|
|
|
id = cmd->device->id;
|
|
lun = cmd->device->lun;
|
|
serial = cmd->serial_number;
|
|
|
|
if (!fcport)
|
|
return ret;
|
|
|
|
qla_printk(KERN_INFO, ha,
|
|
"scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
|
|
|
|
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
|
|
goto eh_host_reset_lock;
|
|
|
|
/*
|
|
* Fixme-may be dpc thread is active and processing
|
|
* loop_resync,so wait a while for it to
|
|
* be completed and then issue big hammer.Otherwise
|
|
* it may cause I/O failure as big hammer marks the
|
|
* devices as lost kicking of the port_down_timer
|
|
* while dpc is stuck for the mailbox to complete.
|
|
*/
|
|
qla2x00_wait_for_loop_ready(ha);
|
|
set_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
|
|
if (qla2x00_abort_isp(pha)) {
|
|
clear_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
|
|
/* failed. schedule dpc to try */
|
|
set_bit(ISP_ABORT_NEEDED, &pha->dpc_flags);
|
|
|
|
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
|
|
goto eh_host_reset_lock;
|
|
}
|
|
clear_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
|
|
|
|
/* Waiting for our command in done_queue to be returned to OS.*/
|
|
if (qla2x00_eh_wait_for_pending_commands(pha, 0, 0, WAIT_HOST) ==
|
|
QLA_SUCCESS)
|
|
ret = SUCCESS;
|
|
|
|
if (ha->parent)
|
|
qla2x00_vp_abort_isp(ha);
|
|
|
|
eh_host_reset_lock:
|
|
qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
|
|
(ret == FAILED) ? "failed" : "succeded");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* qla2x00_loop_reset
|
|
* Issue loop reset.
|
|
*
|
|
* Input:
|
|
* ha = adapter block pointer.
|
|
*
|
|
* Returns:
|
|
* 0 = success
|
|
*/
|
|
int
|
|
qla2x00_loop_reset(scsi_qla_host_t *ha)
|
|
{
|
|
int ret;
|
|
struct fc_port *fcport;
|
|
|
|
if (ha->flags.enable_lip_full_login) {
|
|
ret = qla2x00_full_login_lip(ha);
|
|
if (ret != QLA_SUCCESS) {
|
|
DEBUG2_3(printk("%s(%ld): bus_reset failed: "
|
|
"full_login_lip=%d.\n", __func__, ha->host_no,
|
|
ret));
|
|
}
|
|
atomic_set(&ha->loop_state, LOOP_DOWN);
|
|
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
|
|
qla2x00_mark_all_devices_lost(ha, 0);
|
|
qla2x00_wait_for_loop_ready(ha);
|
|
}
|
|
|
|
if (ha->flags.enable_lip_reset) {
|
|
ret = qla2x00_lip_reset(ha);
|
|
if (ret != QLA_SUCCESS) {
|
|
DEBUG2_3(printk("%s(%ld): bus_reset failed: "
|
|
"lip_reset=%d.\n", __func__, ha->host_no, ret));
|
|
}
|
|
qla2x00_wait_for_loop_ready(ha);
|
|
}
|
|
|
|
if (ha->flags.enable_target_reset) {
|
|
list_for_each_entry(fcport, &ha->fcports, list) {
|
|
if (fcport->port_type != FCT_TARGET)
|
|
continue;
|
|
|
|
ret = ha->isp_ops->target_reset(fcport, 0);
|
|
if (ret != QLA_SUCCESS) {
|
|
DEBUG2_3(printk("%s(%ld): bus_reset failed: "
|
|
"target_reset=%d d_id=%x.\n", __func__,
|
|
ha->host_no, ret, fcport->d_id.b24));
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Issue marker command only when we are going to start the I/O */
|
|
ha->marker_needed = 1;
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
void
|
|
qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
|
|
{
|
|
int cnt;
|
|
unsigned long flags;
|
|
srb_t *sp;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
|
|
sp = ha->outstanding_cmds[cnt];
|
|
if (sp) {
|
|
ha->outstanding_cmds[cnt] = NULL;
|
|
sp->cmd->result = res;
|
|
qla2x00_sp_compl(ha, sp);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static int
|
|
qla2xxx_slave_alloc(struct scsi_device *sdev)
|
|
{
|
|
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
|
|
|
|
if (!rport || fc_remote_port_chkready(rport))
|
|
return -ENXIO;
|
|
|
|
sdev->hostdata = *(fc_port_t **)rport->dd_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qla2xxx_slave_configure(struct scsi_device *sdev)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(sdev->host);
|
|
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
|
|
|
|
if (sdev->tagged_supported)
|
|
scsi_activate_tcq(sdev, ha->max_q_depth);
|
|
else
|
|
scsi_deactivate_tcq(sdev, ha->max_q_depth);
|
|
|
|
rport->dev_loss_tmo = ha->port_down_retry_count;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qla2xxx_slave_destroy(struct scsi_device *sdev)
|
|
{
|
|
sdev->hostdata = NULL;
|
|
}
|
|
|
|
static int
|
|
qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
|
|
{
|
|
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
|
|
return sdev->queue_depth;
|
|
}
|
|
|
|
static int
|
|
qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
|
|
{
|
|
if (sdev->tagged_supported) {
|
|
scsi_set_tag_type(sdev, tag_type);
|
|
if (tag_type)
|
|
scsi_activate_tcq(sdev, sdev->queue_depth);
|
|
else
|
|
scsi_deactivate_tcq(sdev, sdev->queue_depth);
|
|
} else
|
|
tag_type = 0;
|
|
|
|
return tag_type;
|
|
}
|
|
|
|
/**
|
|
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
|
|
* @ha: HA context
|
|
*
|
|
* At exit, the @ha's flags.enable_64bit_addressing set to indicated
|
|
* supported addressing method.
|
|
*/
|
|
static void
|
|
qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
|
|
{
|
|
/* Assume a 32bit DMA mask. */
|
|
ha->flags.enable_64bit_addressing = 0;
|
|
|
|
if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
|
|
/* Any upper-dword bits set? */
|
|
if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
|
|
!pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
|
|
/* Ok, a 64bit DMA mask is applicable. */
|
|
ha->flags.enable_64bit_addressing = 1;
|
|
ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
|
|
ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
|
|
return;
|
|
}
|
|
}
|
|
|
|
dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
|
|
pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
|
|
}
|
|
|
|
static void
|
|
qla2x00_enable_intrs(scsi_qla_host_t *ha)
|
|
{
|
|
unsigned long flags = 0;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
ha->interrupts_on = 1;
|
|
/* enable risc and host interrupts */
|
|
WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
|
|
RD_REG_WORD(®->ictrl);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
|
|
}
|
|
|
|
static void
|
|
qla2x00_disable_intrs(scsi_qla_host_t *ha)
|
|
{
|
|
unsigned long flags = 0;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
ha->interrupts_on = 0;
|
|
/* disable risc and host interrupts */
|
|
WRT_REG_WORD(®->ictrl, 0);
|
|
RD_REG_WORD(®->ictrl);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static void
|
|
qla24xx_enable_intrs(scsi_qla_host_t *ha)
|
|
{
|
|
unsigned long flags = 0;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
ha->interrupts_on = 1;
|
|
WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
|
|
RD_REG_DWORD(®->ictrl);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static void
|
|
qla24xx_disable_intrs(scsi_qla_host_t *ha)
|
|
{
|
|
unsigned long flags = 0;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
ha->interrupts_on = 0;
|
|
WRT_REG_DWORD(®->ictrl, 0);
|
|
RD_REG_DWORD(®->ictrl);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static struct isp_operations qla2100_isp_ops = {
|
|
.pci_config = qla2100_pci_config,
|
|
.reset_chip = qla2x00_reset_chip,
|
|
.chip_diag = qla2x00_chip_diag,
|
|
.config_rings = qla2x00_config_rings,
|
|
.reset_adapter = qla2x00_reset_adapter,
|
|
.nvram_config = qla2x00_nvram_config,
|
|
.update_fw_options = qla2x00_update_fw_options,
|
|
.load_risc = qla2x00_load_risc,
|
|
.pci_info_str = qla2x00_pci_info_str,
|
|
.fw_version_str = qla2x00_fw_version_str,
|
|
.intr_handler = qla2100_intr_handler,
|
|
.enable_intrs = qla2x00_enable_intrs,
|
|
.disable_intrs = qla2x00_disable_intrs,
|
|
.abort_command = qla2x00_abort_command,
|
|
.target_reset = qla2x00_abort_target,
|
|
.lun_reset = qla2x00_lun_reset,
|
|
.fabric_login = qla2x00_login_fabric,
|
|
.fabric_logout = qla2x00_fabric_logout,
|
|
.calc_req_entries = qla2x00_calc_iocbs_32,
|
|
.build_iocbs = qla2x00_build_scsi_iocbs_32,
|
|
.prep_ms_iocb = qla2x00_prep_ms_iocb,
|
|
.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
|
|
.read_nvram = qla2x00_read_nvram_data,
|
|
.write_nvram = qla2x00_write_nvram_data,
|
|
.fw_dump = qla2100_fw_dump,
|
|
.beacon_on = NULL,
|
|
.beacon_off = NULL,
|
|
.beacon_blink = NULL,
|
|
.read_optrom = qla2x00_read_optrom_data,
|
|
.write_optrom = qla2x00_write_optrom_data,
|
|
.get_flash_version = qla2x00_get_flash_version,
|
|
};
|
|
|
|
static struct isp_operations qla2300_isp_ops = {
|
|
.pci_config = qla2300_pci_config,
|
|
.reset_chip = qla2x00_reset_chip,
|
|
.chip_diag = qla2x00_chip_diag,
|
|
.config_rings = qla2x00_config_rings,
|
|
.reset_adapter = qla2x00_reset_adapter,
|
|
.nvram_config = qla2x00_nvram_config,
|
|
.update_fw_options = qla2x00_update_fw_options,
|
|
.load_risc = qla2x00_load_risc,
|
|
.pci_info_str = qla2x00_pci_info_str,
|
|
.fw_version_str = qla2x00_fw_version_str,
|
|
.intr_handler = qla2300_intr_handler,
|
|
.enable_intrs = qla2x00_enable_intrs,
|
|
.disable_intrs = qla2x00_disable_intrs,
|
|
.abort_command = qla2x00_abort_command,
|
|
.target_reset = qla2x00_abort_target,
|
|
.lun_reset = qla2x00_lun_reset,
|
|
.fabric_login = qla2x00_login_fabric,
|
|
.fabric_logout = qla2x00_fabric_logout,
|
|
.calc_req_entries = qla2x00_calc_iocbs_32,
|
|
.build_iocbs = qla2x00_build_scsi_iocbs_32,
|
|
.prep_ms_iocb = qla2x00_prep_ms_iocb,
|
|
.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
|
|
.read_nvram = qla2x00_read_nvram_data,
|
|
.write_nvram = qla2x00_write_nvram_data,
|
|
.fw_dump = qla2300_fw_dump,
|
|
.beacon_on = qla2x00_beacon_on,
|
|
.beacon_off = qla2x00_beacon_off,
|
|
.beacon_blink = qla2x00_beacon_blink,
|
|
.read_optrom = qla2x00_read_optrom_data,
|
|
.write_optrom = qla2x00_write_optrom_data,
|
|
.get_flash_version = qla2x00_get_flash_version,
|
|
};
|
|
|
|
static struct isp_operations qla24xx_isp_ops = {
|
|
.pci_config = qla24xx_pci_config,
|
|
.reset_chip = qla24xx_reset_chip,
|
|
.chip_diag = qla24xx_chip_diag,
|
|
.config_rings = qla24xx_config_rings,
|
|
.reset_adapter = qla24xx_reset_adapter,
|
|
.nvram_config = qla24xx_nvram_config,
|
|
.update_fw_options = qla24xx_update_fw_options,
|
|
.load_risc = qla24xx_load_risc,
|
|
.pci_info_str = qla24xx_pci_info_str,
|
|
.fw_version_str = qla24xx_fw_version_str,
|
|
.intr_handler = qla24xx_intr_handler,
|
|
.enable_intrs = qla24xx_enable_intrs,
|
|
.disable_intrs = qla24xx_disable_intrs,
|
|
.abort_command = qla24xx_abort_command,
|
|
.target_reset = qla24xx_abort_target,
|
|
.lun_reset = qla24xx_lun_reset,
|
|
.fabric_login = qla24xx_login_fabric,
|
|
.fabric_logout = qla24xx_fabric_logout,
|
|
.calc_req_entries = NULL,
|
|
.build_iocbs = NULL,
|
|
.prep_ms_iocb = qla24xx_prep_ms_iocb,
|
|
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
|
|
.read_nvram = qla24xx_read_nvram_data,
|
|
.write_nvram = qla24xx_write_nvram_data,
|
|
.fw_dump = qla24xx_fw_dump,
|
|
.beacon_on = qla24xx_beacon_on,
|
|
.beacon_off = qla24xx_beacon_off,
|
|
.beacon_blink = qla24xx_beacon_blink,
|
|
.read_optrom = qla24xx_read_optrom_data,
|
|
.write_optrom = qla24xx_write_optrom_data,
|
|
.get_flash_version = qla24xx_get_flash_version,
|
|
};
|
|
|
|
static struct isp_operations qla25xx_isp_ops = {
|
|
.pci_config = qla25xx_pci_config,
|
|
.reset_chip = qla24xx_reset_chip,
|
|
.chip_diag = qla24xx_chip_diag,
|
|
.config_rings = qla24xx_config_rings,
|
|
.reset_adapter = qla24xx_reset_adapter,
|
|
.nvram_config = qla24xx_nvram_config,
|
|
.update_fw_options = qla24xx_update_fw_options,
|
|
.load_risc = qla24xx_load_risc,
|
|
.pci_info_str = qla24xx_pci_info_str,
|
|
.fw_version_str = qla24xx_fw_version_str,
|
|
.intr_handler = qla24xx_intr_handler,
|
|
.enable_intrs = qla24xx_enable_intrs,
|
|
.disable_intrs = qla24xx_disable_intrs,
|
|
.abort_command = qla24xx_abort_command,
|
|
.target_reset = qla24xx_abort_target,
|
|
.lun_reset = qla24xx_lun_reset,
|
|
.fabric_login = qla24xx_login_fabric,
|
|
.fabric_logout = qla24xx_fabric_logout,
|
|
.calc_req_entries = NULL,
|
|
.build_iocbs = NULL,
|
|
.prep_ms_iocb = qla24xx_prep_ms_iocb,
|
|
.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
|
|
.read_nvram = qla25xx_read_nvram_data,
|
|
.write_nvram = qla25xx_write_nvram_data,
|
|
.fw_dump = qla25xx_fw_dump,
|
|
.beacon_on = qla24xx_beacon_on,
|
|
.beacon_off = qla24xx_beacon_off,
|
|
.beacon_blink = qla24xx_beacon_blink,
|
|
.read_optrom = qla25xx_read_optrom_data,
|
|
.write_optrom = qla24xx_write_optrom_data,
|
|
.get_flash_version = qla24xx_get_flash_version,
|
|
};
|
|
|
|
static inline void
|
|
qla2x00_set_isp_flags(scsi_qla_host_t *ha)
|
|
{
|
|
ha->device_type = DT_EXTENDED_IDS;
|
|
switch (ha->pdev->device) {
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2100:
|
|
ha->device_type |= DT_ISP2100;
|
|
ha->device_type &= ~DT_EXTENDED_IDS;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2100;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2200:
|
|
ha->device_type |= DT_ISP2200;
|
|
ha->device_type &= ~DT_EXTENDED_IDS;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2100;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2300:
|
|
ha->device_type |= DT_ISP2300;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2312:
|
|
ha->device_type |= DT_ISP2312;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2322:
|
|
ha->device_type |= DT_ISP2322;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
if (ha->pdev->subsystem_vendor == 0x1028 &&
|
|
ha->pdev->subsystem_device == 0x0170)
|
|
ha->device_type |= DT_OEM_001;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP6312:
|
|
ha->device_type |= DT_ISP6312;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP6322:
|
|
ha->device_type |= DT_ISP6322;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2300;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2422:
|
|
ha->device_type |= DT_ISP2422;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->device_type |= DT_IIDMA;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2432:
|
|
ha->device_type |= DT_ISP2432;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->device_type |= DT_IIDMA;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP8432:
|
|
ha->device_type |= DT_ISP8432;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->device_type |= DT_IIDMA;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP5422:
|
|
ha->device_type |= DT_ISP5422;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP5432:
|
|
ha->device_type |= DT_ISP5432;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
case PCI_DEVICE_ID_QLOGIC_ISP2532:
|
|
ha->device_type |= DT_ISP2532;
|
|
ha->device_type |= DT_ZIO_SUPPORTED;
|
|
ha->device_type |= DT_FWI2;
|
|
ha->device_type |= DT_IIDMA;
|
|
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
qla2x00_iospace_config(scsi_qla_host_t *ha)
|
|
{
|
|
resource_size_t pio;
|
|
|
|
if (pci_request_selected_regions(ha->pdev, ha->bars,
|
|
QLA2XXX_DRIVER_NAME)) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Failed to reserve PIO/MMIO regions (%s)\n",
|
|
pci_name(ha->pdev));
|
|
|
|
goto iospace_error_exit;
|
|
}
|
|
if (!(ha->bars & 1))
|
|
goto skip_pio;
|
|
|
|
/* We only need PIO for Flash operations on ISP2312 v2 chips. */
|
|
pio = pci_resource_start(ha->pdev, 0);
|
|
if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
|
|
if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Invalid PCI I/O region size (%s)...\n",
|
|
pci_name(ha->pdev));
|
|
pio = 0;
|
|
}
|
|
} else {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"region #0 not a PIO resource (%s)...\n",
|
|
pci_name(ha->pdev));
|
|
pio = 0;
|
|
}
|
|
ha->pio_address = pio;
|
|
|
|
skip_pio:
|
|
/* Use MMIO operations for all accesses. */
|
|
if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
|
|
qla_printk(KERN_ERR, ha,
|
|
"region #1 not an MMIO resource (%s), aborting\n",
|
|
pci_name(ha->pdev));
|
|
goto iospace_error_exit;
|
|
}
|
|
if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
|
|
qla_printk(KERN_ERR, ha,
|
|
"Invalid PCI mem region size (%s), aborting\n",
|
|
pci_name(ha->pdev));
|
|
goto iospace_error_exit;
|
|
}
|
|
|
|
ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
|
|
if (!ha->iobase) {
|
|
qla_printk(KERN_ERR, ha,
|
|
"cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
|
|
|
|
goto iospace_error_exit;
|
|
}
|
|
|
|
return (0);
|
|
|
|
iospace_error_exit:
|
|
return (-ENOMEM);
|
|
}
|
|
|
|
static void
|
|
qla2xxx_scan_start(struct Scsi_Host *shost)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(shost);
|
|
|
|
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
|
|
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
|
|
set_bit(RSCN_UPDATE, &ha->dpc_flags);
|
|
set_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags);
|
|
}
|
|
|
|
static int
|
|
qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
|
|
{
|
|
scsi_qla_host_t *ha = shost_priv(shost);
|
|
|
|
if (!ha->host)
|
|
return 1;
|
|
if (time > ha->loop_reset_delay * HZ)
|
|
return 1;
|
|
|
|
return atomic_read(&ha->loop_state) == LOOP_READY;
|
|
}
|
|
|
|
/*
|
|
* PCI driver interface
|
|
*/
|
|
static int __devinit
|
|
qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
int ret = -ENODEV;
|
|
struct Scsi_Host *host;
|
|
scsi_qla_host_t *ha;
|
|
char pci_info[30];
|
|
char fw_str[30];
|
|
struct scsi_host_template *sht;
|
|
int bars, mem_only = 0;
|
|
|
|
bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
|
|
sht = &qla2x00_driver_template;
|
|
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
|
|
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
|
|
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
|
|
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
|
|
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
|
|
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) {
|
|
bars = pci_select_bars(pdev, IORESOURCE_MEM);
|
|
sht = &qla24xx_driver_template;
|
|
mem_only = 1;
|
|
}
|
|
|
|
if (mem_only) {
|
|
if (pci_enable_device_mem(pdev))
|
|
goto probe_out;
|
|
} else {
|
|
if (pci_enable_device(pdev))
|
|
goto probe_out;
|
|
}
|
|
|
|
if (pci_find_aer_capability(pdev))
|
|
if (pci_enable_pcie_error_reporting(pdev))
|
|
goto probe_out;
|
|
|
|
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
|
|
if (host == NULL) {
|
|
printk(KERN_WARNING
|
|
"qla2xxx: Couldn't allocate host from scsi layer!\n");
|
|
goto probe_disable_device;
|
|
}
|
|
|
|
/* Clear our data area */
|
|
ha = shost_priv(host);
|
|
memset(ha, 0, sizeof(scsi_qla_host_t));
|
|
|
|
ha->pdev = pdev;
|
|
ha->host = host;
|
|
ha->host_no = host->host_no;
|
|
sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
|
|
ha->parent = NULL;
|
|
ha->bars = bars;
|
|
ha->mem_only = mem_only;
|
|
spin_lock_init(&ha->hardware_lock);
|
|
|
|
/* Set ISP-type information. */
|
|
qla2x00_set_isp_flags(ha);
|
|
|
|
/* Configure PCI I/O space */
|
|
ret = qla2x00_iospace_config(ha);
|
|
if (ret)
|
|
goto probe_failed;
|
|
|
|
qla_printk(KERN_INFO, ha,
|
|
"Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
|
|
ha->iobase);
|
|
|
|
ha->prev_topology = 0;
|
|
ha->init_cb_size = sizeof(init_cb_t);
|
|
ha->mgmt_svr_loop_id = MANAGEMENT_SERVER + ha->vp_idx;
|
|
ha->link_data_rate = PORT_SPEED_UNKNOWN;
|
|
ha->optrom_size = OPTROM_SIZE_2300;
|
|
|
|
ha->max_q_depth = MAX_Q_DEPTH;
|
|
if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
|
|
ha->max_q_depth = ql2xmaxqdepth;
|
|
|
|
/* Assign ISP specific operations. */
|
|
if (IS_QLA2100(ha)) {
|
|
host->max_id = MAX_TARGETS_2100;
|
|
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
|
|
ha->request_q_length = REQUEST_ENTRY_CNT_2100;
|
|
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
|
|
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
|
|
host->sg_tablesize = 32;
|
|
ha->gid_list_info_size = 4;
|
|
ha->isp_ops = &qla2100_isp_ops;
|
|
} else if (IS_QLA2200(ha)) {
|
|
host->max_id = MAX_TARGETS_2200;
|
|
ha->mbx_count = MAILBOX_REGISTER_COUNT;
|
|
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
|
|
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
|
|
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
|
|
ha->gid_list_info_size = 4;
|
|
ha->isp_ops = &qla2100_isp_ops;
|
|
} else if (IS_QLA23XX(ha)) {
|
|
host->max_id = MAX_TARGETS_2200;
|
|
ha->mbx_count = MAILBOX_REGISTER_COUNT;
|
|
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
|
|
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
|
|
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
|
|
ha->gid_list_info_size = 6;
|
|
if (IS_QLA2322(ha) || IS_QLA6322(ha))
|
|
ha->optrom_size = OPTROM_SIZE_2322;
|
|
ha->isp_ops = &qla2300_isp_ops;
|
|
} else if (IS_QLA24XX_TYPE(ha)) {
|
|
host->max_id = MAX_TARGETS_2200;
|
|
ha->mbx_count = MAILBOX_REGISTER_COUNT;
|
|
ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
|
|
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
|
|
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
|
|
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
|
|
ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
|
|
ha->gid_list_info_size = 8;
|
|
ha->optrom_size = OPTROM_SIZE_24XX;
|
|
ha->isp_ops = &qla24xx_isp_ops;
|
|
} else if (IS_QLA25XX(ha)) {
|
|
host->max_id = MAX_TARGETS_2200;
|
|
ha->mbx_count = MAILBOX_REGISTER_COUNT;
|
|
ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
|
|
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
|
|
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
|
|
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
|
|
ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
|
|
ha->gid_list_info_size = 8;
|
|
ha->optrom_size = OPTROM_SIZE_25XX;
|
|
ha->isp_ops = &qla25xx_isp_ops;
|
|
}
|
|
host->can_queue = ha->request_q_length + 128;
|
|
|
|
mutex_init(&ha->vport_lock);
|
|
init_completion(&ha->mbx_cmd_comp);
|
|
complete(&ha->mbx_cmd_comp);
|
|
init_completion(&ha->mbx_intr_comp);
|
|
|
|
INIT_LIST_HEAD(&ha->list);
|
|
INIT_LIST_HEAD(&ha->fcports);
|
|
INIT_LIST_HEAD(&ha->vp_list);
|
|
INIT_LIST_HEAD(&ha->work_list);
|
|
|
|
set_bit(0, (unsigned long *) ha->vp_idx_map);
|
|
|
|
qla2x00_config_dma_addressing(ha);
|
|
if (qla2x00_mem_alloc(ha)) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"[ERROR] Failed to allocate memory for adapter\n");
|
|
|
|
ret = -ENOMEM;
|
|
goto probe_failed;
|
|
}
|
|
|
|
if (qla2x00_initialize_adapter(ha)) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Failed to initialize adapter\n");
|
|
|
|
DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
|
|
"Adapter flags %x.\n",
|
|
ha->host_no, ha->device_flags));
|
|
|
|
ret = -ENODEV;
|
|
goto probe_failed;
|
|
}
|
|
|
|
/*
|
|
* Startup the kernel thread for this host adapter
|
|
*/
|
|
ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
|
|
"%s_dpc", ha->host_str);
|
|
if (IS_ERR(ha->dpc_thread)) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Unable to start DPC thread!\n");
|
|
ret = PTR_ERR(ha->dpc_thread);
|
|
goto probe_failed;
|
|
}
|
|
|
|
host->this_id = 255;
|
|
host->cmd_per_lun = 3;
|
|
host->unique_id = host->host_no;
|
|
host->max_cmd_len = MAX_CMDSZ;
|
|
host->max_channel = MAX_BUSES - 1;
|
|
host->max_lun = MAX_LUNS;
|
|
host->transportt = qla2xxx_transport_template;
|
|
|
|
ret = qla2x00_request_irqs(ha);
|
|
if (ret)
|
|
goto probe_failed;
|
|
|
|
/* Initialized the timer */
|
|
qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
|
|
|
|
DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
|
|
ha->host_no, ha));
|
|
|
|
pci_set_drvdata(pdev, ha);
|
|
|
|
ha->flags.init_done = 1;
|
|
ha->flags.online = 1;
|
|
|
|
ret = scsi_add_host(host, &pdev->dev);
|
|
if (ret)
|
|
goto probe_failed;
|
|
|
|
ha->isp_ops->enable_intrs(ha);
|
|
|
|
scsi_scan_host(host);
|
|
|
|
qla2x00_alloc_sysfs_attr(ha);
|
|
|
|
qla2x00_init_host_attr(ha);
|
|
|
|
qla2x00_dfs_setup(ha);
|
|
|
|
qla_printk(KERN_INFO, ha, "\n"
|
|
" QLogic Fibre Channel HBA Driver: %s\n"
|
|
" QLogic %s - %s\n"
|
|
" ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
|
|
qla2x00_version_str, ha->model_number,
|
|
ha->model_desc ? ha->model_desc: "", pdev->device,
|
|
ha->isp_ops->pci_info_str(ha, pci_info), pci_name(pdev),
|
|
ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
|
|
ha->isp_ops->fw_version_str(ha, fw_str));
|
|
|
|
return 0;
|
|
|
|
probe_failed:
|
|
qla2x00_free_device(ha);
|
|
|
|
scsi_host_put(host);
|
|
|
|
probe_disable_device:
|
|
pci_disable_device(pdev);
|
|
|
|
probe_out:
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qla2x00_remove_one(struct pci_dev *pdev)
|
|
{
|
|
scsi_qla_host_t *ha, *vha, *temp;
|
|
|
|
ha = pci_get_drvdata(pdev);
|
|
|
|
list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
|
|
fc_vport_terminate(vha->fc_vport);
|
|
|
|
set_bit(UNLOADING, &ha->dpc_flags);
|
|
|
|
qla2x00_dfs_remove(ha);
|
|
|
|
qla84xx_put_chip(ha);
|
|
|
|
qla2x00_free_sysfs_attr(ha);
|
|
|
|
fc_remove_host(ha->host);
|
|
|
|
scsi_remove_host(ha->host);
|
|
|
|
qla2x00_free_device(ha);
|
|
|
|
scsi_host_put(ha->host);
|
|
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static void
|
|
qla2x00_free_device(scsi_qla_host_t *ha)
|
|
{
|
|
qla2x00_abort_all_cmds(ha, DID_NO_CONNECT << 16);
|
|
|
|
/* Disable timer */
|
|
if (ha->timer_active)
|
|
qla2x00_stop_timer(ha);
|
|
|
|
ha->flags.online = 0;
|
|
|
|
/* Kill the kernel thread for this host */
|
|
if (ha->dpc_thread) {
|
|
struct task_struct *t = ha->dpc_thread;
|
|
|
|
/*
|
|
* qla2xxx_wake_dpc checks for ->dpc_thread
|
|
* so we need to zero it out.
|
|
*/
|
|
ha->dpc_thread = NULL;
|
|
kthread_stop(t);
|
|
}
|
|
|
|
if (ha->flags.fce_enabled)
|
|
qla2x00_disable_fce_trace(ha, NULL, NULL);
|
|
|
|
if (ha->eft)
|
|
qla2x00_disable_eft_trace(ha);
|
|
|
|
/* Stop currently executing firmware. */
|
|
qla2x00_try_to_stop_firmware(ha);
|
|
|
|
/* turn-off interrupts on the card */
|
|
if (ha->interrupts_on)
|
|
ha->isp_ops->disable_intrs(ha);
|
|
|
|
qla2x00_mem_free(ha);
|
|
|
|
qla2x00_free_irqs(ha);
|
|
|
|
/* release io space registers */
|
|
if (ha->iobase)
|
|
iounmap(ha->iobase);
|
|
pci_release_selected_regions(ha->pdev, ha->bars);
|
|
}
|
|
|
|
static inline void
|
|
qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
|
|
int defer)
|
|
{
|
|
struct fc_rport *rport;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
if (!fcport->rport)
|
|
return;
|
|
|
|
rport = fcport->rport;
|
|
if (defer) {
|
|
spin_lock_irq(ha->host->host_lock);
|
|
fcport->drport = rport;
|
|
spin_unlock_irq(ha->host->host_lock);
|
|
set_bit(FCPORT_UPDATE_NEEDED, &pha->dpc_flags);
|
|
qla2xxx_wake_dpc(pha);
|
|
} else
|
|
fc_remote_port_delete(rport);
|
|
}
|
|
|
|
/*
|
|
* qla2x00_mark_device_lost Updates fcport state when device goes offline.
|
|
*
|
|
* Input: ha = adapter block pointer. fcport = port structure pointer.
|
|
*
|
|
* Return: None.
|
|
*
|
|
* Context:
|
|
*/
|
|
void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
|
|
int do_login, int defer)
|
|
{
|
|
if (atomic_read(&fcport->state) == FCS_ONLINE &&
|
|
ha->vp_idx == fcport->vp_idx)
|
|
qla2x00_schedule_rport_del(ha, fcport, defer);
|
|
|
|
/*
|
|
* We may need to retry the login, so don't change the state of the
|
|
* port but do the retries.
|
|
*/
|
|
if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
|
|
atomic_set(&fcport->state, FCS_DEVICE_LOST);
|
|
|
|
if (!do_login)
|
|
return;
|
|
|
|
if (fcport->login_retry == 0) {
|
|
fcport->login_retry = ha->login_retry_count;
|
|
set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
|
|
|
|
DEBUG(printk("scsi(%ld): Port login retry: "
|
|
"%02x%02x%02x%02x%02x%02x%02x%02x, "
|
|
"id = 0x%04x retry cnt=%d\n",
|
|
ha->host_no,
|
|
fcport->port_name[0],
|
|
fcport->port_name[1],
|
|
fcport->port_name[2],
|
|
fcport->port_name[3],
|
|
fcport->port_name[4],
|
|
fcport->port_name[5],
|
|
fcport->port_name[6],
|
|
fcport->port_name[7],
|
|
fcport->loop_id,
|
|
fcport->login_retry));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* qla2x00_mark_all_devices_lost
|
|
* Updates fcport state when device goes offline.
|
|
*
|
|
* Input:
|
|
* ha = adapter block pointer.
|
|
* fcport = port structure pointer.
|
|
*
|
|
* Return:
|
|
* None.
|
|
*
|
|
* Context:
|
|
*/
|
|
void
|
|
qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
|
|
{
|
|
fc_port_t *fcport;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
list_for_each_entry(fcport, &pha->fcports, list) {
|
|
if (ha->vp_idx != fcport->vp_idx)
|
|
continue;
|
|
/*
|
|
* No point in marking the device as lost, if the device is
|
|
* already DEAD.
|
|
*/
|
|
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
|
|
continue;
|
|
if (atomic_read(&fcport->state) == FCS_ONLINE)
|
|
qla2x00_schedule_rport_del(ha, fcport, defer);
|
|
atomic_set(&fcport->state, FCS_DEVICE_LOST);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* qla2x00_mem_alloc
|
|
* Allocates adapter memory.
|
|
*
|
|
* Returns:
|
|
* 0 = success.
|
|
* !0 = failure.
|
|
*/
|
|
static int
|
|
qla2x00_mem_alloc(scsi_qla_host_t *ha)
|
|
{
|
|
char name[16];
|
|
|
|
ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
|
|
(ha->request_q_length + 1) * sizeof(request_t), &ha->request_dma,
|
|
GFP_KERNEL);
|
|
if (!ha->request_ring)
|
|
goto fail;
|
|
|
|
ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
|
|
(ha->response_q_length + 1) * sizeof(response_t),
|
|
&ha->response_dma, GFP_KERNEL);
|
|
if (!ha->response_ring)
|
|
goto fail_free_request_ring;
|
|
|
|
ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
|
|
&ha->gid_list_dma, GFP_KERNEL);
|
|
if (!ha->gid_list)
|
|
goto fail_free_response_ring;
|
|
|
|
ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
|
|
&ha->init_cb_dma, GFP_KERNEL);
|
|
if (!ha->init_cb)
|
|
goto fail_free_gid_list;
|
|
|
|
snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
|
|
ha->host_no);
|
|
ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
|
|
DMA_POOL_SIZE, 8, 0);
|
|
if (!ha->s_dma_pool)
|
|
goto fail_free_init_cb;
|
|
|
|
ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
|
|
if (!ha->srb_mempool)
|
|
goto fail_free_s_dma_pool;
|
|
|
|
/* Get memory for cached NVRAM */
|
|
ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL);
|
|
if (!ha->nvram)
|
|
goto fail_free_srb_mempool;
|
|
|
|
/* Allocate memory for SNS commands */
|
|
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
|
|
/* Get consistent memory allocated for SNS commands */
|
|
ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
|
|
sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
|
|
if (!ha->sns_cmd)
|
|
goto fail_free_nvram;
|
|
} else {
|
|
/* Get consistent memory allocated for MS IOCB */
|
|
ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
|
|
&ha->ms_iocb_dma);
|
|
if (!ha->ms_iocb)
|
|
goto fail_free_nvram;
|
|
|
|
/* Get consistent memory allocated for CT SNS commands */
|
|
ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
|
|
sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
|
|
if (!ha->ct_sns)
|
|
goto fail_free_ms_iocb;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_free_ms_iocb:
|
|
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
|
|
ha->ms_iocb = NULL;
|
|
ha->ms_iocb_dma = 0;
|
|
fail_free_nvram:
|
|
kfree(ha->nvram);
|
|
ha->nvram = NULL;
|
|
fail_free_srb_mempool:
|
|
mempool_destroy(ha->srb_mempool);
|
|
ha->srb_mempool = NULL;
|
|
fail_free_s_dma_pool:
|
|
dma_pool_destroy(ha->s_dma_pool);
|
|
ha->s_dma_pool = NULL;
|
|
fail_free_init_cb:
|
|
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
|
|
ha->init_cb_dma);
|
|
ha->init_cb = NULL;
|
|
ha->init_cb_dma = 0;
|
|
fail_free_gid_list:
|
|
dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
|
|
ha->gid_list_dma);
|
|
ha->gid_list = NULL;
|
|
ha->gid_list_dma = 0;
|
|
fail_free_response_ring:
|
|
dma_free_coherent(&ha->pdev->dev, (ha->response_q_length + 1) *
|
|
sizeof(response_t), ha->response_ring, ha->response_dma);
|
|
ha->response_ring = NULL;
|
|
ha->response_dma = 0;
|
|
fail_free_request_ring:
|
|
dma_free_coherent(&ha->pdev->dev, (ha->request_q_length + 1) *
|
|
sizeof(request_t), ha->request_ring, ha->request_dma);
|
|
ha->request_ring = NULL;
|
|
ha->request_dma = 0;
|
|
fail:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* qla2x00_mem_free
|
|
* Frees all adapter allocated memory.
|
|
*
|
|
* Input:
|
|
* ha = adapter block pointer.
|
|
*/
|
|
static void
|
|
qla2x00_mem_free(scsi_qla_host_t *ha)
|
|
{
|
|
struct list_head *fcpl, *fcptemp;
|
|
fc_port_t *fcport;
|
|
|
|
if (ha->srb_mempool)
|
|
mempool_destroy(ha->srb_mempool);
|
|
|
|
if (ha->fce)
|
|
dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
|
|
ha->fce_dma);
|
|
|
|
if (ha->fw_dump) {
|
|
if (ha->eft)
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
|
|
vfree(ha->fw_dump);
|
|
}
|
|
|
|
if (ha->sns_cmd)
|
|
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
|
|
ha->sns_cmd, ha->sns_cmd_dma);
|
|
|
|
if (ha->ct_sns)
|
|
dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
|
|
ha->ct_sns, ha->ct_sns_dma);
|
|
|
|
if (ha->sfp_data)
|
|
dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
|
|
|
|
if (ha->ms_iocb)
|
|
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
|
|
|
|
if (ha->s_dma_pool)
|
|
dma_pool_destroy(ha->s_dma_pool);
|
|
|
|
if (ha->init_cb)
|
|
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
|
|
ha->init_cb, ha->init_cb_dma);
|
|
|
|
if (ha->gid_list)
|
|
dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
|
|
ha->gid_list_dma);
|
|
|
|
if (ha->response_ring)
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
(ha->response_q_length + 1) * sizeof(response_t),
|
|
ha->response_ring, ha->response_dma);
|
|
|
|
if (ha->request_ring)
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
(ha->request_q_length + 1) * sizeof(request_t),
|
|
ha->request_ring, ha->request_dma);
|
|
|
|
ha->srb_mempool = NULL;
|
|
ha->eft = NULL;
|
|
ha->eft_dma = 0;
|
|
ha->sns_cmd = NULL;
|
|
ha->sns_cmd_dma = 0;
|
|
ha->ct_sns = NULL;
|
|
ha->ct_sns_dma = 0;
|
|
ha->ms_iocb = NULL;
|
|
ha->ms_iocb_dma = 0;
|
|
ha->init_cb = NULL;
|
|
ha->init_cb_dma = 0;
|
|
|
|
ha->s_dma_pool = NULL;
|
|
|
|
ha->gid_list = NULL;
|
|
ha->gid_list_dma = 0;
|
|
|
|
ha->response_ring = NULL;
|
|
ha->response_dma = 0;
|
|
ha->request_ring = NULL;
|
|
ha->request_dma = 0;
|
|
|
|
list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
|
|
fcport = list_entry(fcpl, fc_port_t, list);
|
|
|
|
/* fc ports */
|
|
list_del_init(&fcport->list);
|
|
kfree(fcport);
|
|
}
|
|
INIT_LIST_HEAD(&ha->fcports);
|
|
|
|
ha->fw_dump = NULL;
|
|
ha->fw_dumped = 0;
|
|
ha->fw_dump_reading = 0;
|
|
|
|
vfree(ha->optrom_buffer);
|
|
kfree(ha->nvram);
|
|
}
|
|
|
|
static struct qla_work_evt *
|
|
qla2x00_alloc_work(struct scsi_qla_host *ha, enum qla_work_type type,
|
|
int locked)
|
|
{
|
|
struct qla_work_evt *e;
|
|
|
|
e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
|
|
GFP_KERNEL);
|
|
if (!e)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&e->list);
|
|
e->type = type;
|
|
e->flags = QLA_EVT_FLAG_FREE;
|
|
return e;
|
|
}
|
|
|
|
static int
|
|
qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
|
|
{
|
|
unsigned long uninitialized_var(flags);
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
if (!locked)
|
|
spin_lock_irqsave(&pha->hardware_lock, flags);
|
|
list_add_tail(&e->list, &ha->work_list);
|
|
qla2xxx_wake_dpc(ha);
|
|
if (!locked)
|
|
spin_unlock_irqrestore(&pha->hardware_lock, flags);
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
int
|
|
qla2x00_post_aen_work(struct scsi_qla_host *ha, enum fc_host_event_code code,
|
|
u32 data)
|
|
{
|
|
struct qla_work_evt *e;
|
|
|
|
e = qla2x00_alloc_work(ha, QLA_EVT_AEN, 1);
|
|
if (!e)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
e->u.aen.code = code;
|
|
e->u.aen.data = data;
|
|
return qla2x00_post_work(ha, e, 1);
|
|
}
|
|
|
|
int
|
|
qla2x00_post_hwe_work(struct scsi_qla_host *ha, uint16_t code, uint16_t d1,
|
|
uint16_t d2, uint16_t d3)
|
|
{
|
|
struct qla_work_evt *e;
|
|
|
|
e = qla2x00_alloc_work(ha, QLA_EVT_HWE_LOG, 1);
|
|
if (!e)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
e->u.hwe.code = code;
|
|
e->u.hwe.d1 = d1;
|
|
e->u.hwe.d2 = d2;
|
|
e->u.hwe.d3 = d3;
|
|
return qla2x00_post_work(ha, e, 1);
|
|
}
|
|
|
|
static void
|
|
qla2x00_do_work(struct scsi_qla_host *ha)
|
|
{
|
|
struct qla_work_evt *e;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
spin_lock_irq(&pha->hardware_lock);
|
|
while (!list_empty(&ha->work_list)) {
|
|
e = list_entry(ha->work_list.next, struct qla_work_evt, list);
|
|
list_del_init(&e->list);
|
|
spin_unlock_irq(&pha->hardware_lock);
|
|
|
|
switch (e->type) {
|
|
case QLA_EVT_AEN:
|
|
fc_host_post_event(ha->host, fc_get_event_number(),
|
|
e->u.aen.code, e->u.aen.data);
|
|
break;
|
|
case QLA_EVT_HWE_LOG:
|
|
qla2xxx_hw_event_log(ha, e->u.hwe.code, e->u.hwe.d1,
|
|
e->u.hwe.d2, e->u.hwe.d3);
|
|
break;
|
|
}
|
|
if (e->flags & QLA_EVT_FLAG_FREE)
|
|
kfree(e);
|
|
spin_lock_irq(&pha->hardware_lock);
|
|
}
|
|
spin_unlock_irq(&pha->hardware_lock);
|
|
}
|
|
|
|
/**************************************************************************
|
|
* qla2x00_do_dpc
|
|
* This kernel thread is a task that is schedule by the interrupt handler
|
|
* to perform the background processing for interrupts.
|
|
*
|
|
* Notes:
|
|
* This task always run in the context of a kernel thread. It
|
|
* is kick-off by the driver's detect code and starts up
|
|
* up one per adapter. It immediately goes to sleep and waits for
|
|
* some fibre event. When either the interrupt handler or
|
|
* the timer routine detects a event it will one of the task
|
|
* bits then wake us up.
|
|
**************************************************************************/
|
|
static int
|
|
qla2x00_do_dpc(void *data)
|
|
{
|
|
int rval;
|
|
scsi_qla_host_t *ha;
|
|
fc_port_t *fcport;
|
|
uint8_t status;
|
|
uint16_t next_loopid;
|
|
struct scsi_qla_host *vha;
|
|
int i;
|
|
|
|
|
|
ha = (scsi_qla_host_t *)data;
|
|
|
|
set_user_nice(current, -20);
|
|
|
|
while (!kthread_should_stop()) {
|
|
DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule();
|
|
__set_current_state(TASK_RUNNING);
|
|
|
|
DEBUG3(printk("qla2x00: DPC handler waking up\n"));
|
|
|
|
/* Initialization not yet finished. Don't do anything yet. */
|
|
if (!ha->flags.init_done)
|
|
continue;
|
|
|
|
DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
|
|
|
|
ha->dpc_active = 1;
|
|
|
|
if (ha->flags.mbox_busy) {
|
|
ha->dpc_active = 0;
|
|
continue;
|
|
}
|
|
|
|
qla2x00_do_work(ha);
|
|
|
|
if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
|
|
|
|
DEBUG(printk("scsi(%ld): dpc: sched "
|
|
"qla2x00_abort_isp ha = %p\n",
|
|
ha->host_no, ha));
|
|
if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
|
|
&ha->dpc_flags))) {
|
|
|
|
if (qla2x00_abort_isp(ha)) {
|
|
/* failed. retry later */
|
|
set_bit(ISP_ABORT_NEEDED,
|
|
&ha->dpc_flags);
|
|
}
|
|
clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
|
|
}
|
|
|
|
for_each_mapped_vp_idx(ha, i) {
|
|
list_for_each_entry(vha, &ha->vp_list,
|
|
vp_list) {
|
|
if (i == vha->vp_idx) {
|
|
set_bit(ISP_ABORT_NEEDED,
|
|
&vha->dpc_flags);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
|
|
ha->host_no));
|
|
}
|
|
|
|
if (test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags)) {
|
|
qla2x00_update_fcports(ha);
|
|
clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
|
|
}
|
|
|
|
if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
|
|
(!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
|
|
|
|
DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
|
|
ha->host_no));
|
|
|
|
qla2x00_rst_aen(ha);
|
|
clear_bit(RESET_ACTIVE, &ha->dpc_flags);
|
|
}
|
|
|
|
/* Retry each device up to login retry count */
|
|
if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
|
|
!test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
|
|
atomic_read(&ha->loop_state) != LOOP_DOWN) {
|
|
|
|
DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
|
|
ha->host_no));
|
|
|
|
next_loopid = 0;
|
|
list_for_each_entry(fcport, &ha->fcports, list) {
|
|
/*
|
|
* If the port is not ONLINE then try to login
|
|
* to it if we haven't run out of retries.
|
|
*/
|
|
if (atomic_read(&fcport->state) != FCS_ONLINE &&
|
|
fcport->login_retry) {
|
|
|
|
if (fcport->flags & FCF_FABRIC_DEVICE) {
|
|
if (fcport->flags &
|
|
FCF_TAPE_PRESENT)
|
|
ha->isp_ops->fabric_logout(
|
|
ha, fcport->loop_id,
|
|
fcport->d_id.b.domain,
|
|
fcport->d_id.b.area,
|
|
fcport->d_id.b.al_pa);
|
|
status = qla2x00_fabric_login(
|
|
ha, fcport, &next_loopid);
|
|
} else
|
|
status =
|
|
qla2x00_local_device_login(
|
|
ha, fcport);
|
|
|
|
fcport->login_retry--;
|
|
if (status == QLA_SUCCESS) {
|
|
fcport->old_loop_id = fcport->loop_id;
|
|
|
|
DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
|
|
ha->host_no, fcport->loop_id));
|
|
|
|
qla2x00_update_fcport(ha,
|
|
fcport);
|
|
} else if (status == 1) {
|
|
set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
|
|
/* retry the login again */
|
|
DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
|
|
ha->host_no,
|
|
fcport->login_retry, fcport->loop_id));
|
|
} else {
|
|
fcport->login_retry = 0;
|
|
}
|
|
if (fcport->login_retry == 0 && status != QLA_SUCCESS)
|
|
fcport->loop_id = FC_NO_LOOP_ID;
|
|
}
|
|
if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
|
|
break;
|
|
}
|
|
DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
|
|
ha->host_no));
|
|
}
|
|
|
|
if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
|
|
|
|
DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
|
|
ha->host_no));
|
|
|
|
if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
|
|
&ha->dpc_flags))) {
|
|
|
|
rval = qla2x00_loop_resync(ha);
|
|
|
|
clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
|
|
}
|
|
|
|
DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
|
|
ha->host_no));
|
|
}
|
|
|
|
if (test_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags) &&
|
|
atomic_read(&ha->loop_state) == LOOP_READY) {
|
|
clear_bit(NPIV_CONFIG_NEEDED, &ha->dpc_flags);
|
|
qla2xxx_flash_npiv_conf(ha);
|
|
}
|
|
|
|
if (!ha->interrupts_on)
|
|
ha->isp_ops->enable_intrs(ha);
|
|
|
|
if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
|
|
ha->isp_ops->beacon_blink(ha);
|
|
|
|
qla2x00_do_dpc_all_vps(ha);
|
|
|
|
ha->dpc_active = 0;
|
|
} /* End of while(1) */
|
|
|
|
DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
|
|
|
|
/*
|
|
* Make sure that nobody tries to wake us up again.
|
|
*/
|
|
ha->dpc_active = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
qla2xxx_wake_dpc(scsi_qla_host_t *ha)
|
|
{
|
|
struct task_struct *t = ha->dpc_thread;
|
|
|
|
if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
|
|
wake_up_process(t);
|
|
}
|
|
|
|
/*
|
|
* qla2x00_rst_aen
|
|
* Processes asynchronous reset.
|
|
*
|
|
* Input:
|
|
* ha = adapter block pointer.
|
|
*/
|
|
static void
|
|
qla2x00_rst_aen(scsi_qla_host_t *ha)
|
|
{
|
|
if (ha->flags.online && !ha->flags.reset_active &&
|
|
!atomic_read(&ha->loop_down_timer) &&
|
|
!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
|
|
do {
|
|
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
|
|
|
|
/*
|
|
* Issue marker command only when we are going to start
|
|
* the I/O.
|
|
*/
|
|
ha->marker_needed = 1;
|
|
} while (!atomic_read(&ha->loop_down_timer) &&
|
|
(test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
|
|
}
|
|
}
|
|
|
|
static void
|
|
qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
|
|
{
|
|
struct scsi_cmnd *cmd = sp->cmd;
|
|
|
|
if (sp->flags & SRB_DMA_VALID) {
|
|
scsi_dma_unmap(cmd);
|
|
sp->flags &= ~SRB_DMA_VALID;
|
|
}
|
|
CMD_SP(cmd) = NULL;
|
|
}
|
|
|
|
void
|
|
qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
|
|
{
|
|
struct scsi_cmnd *cmd = sp->cmd;
|
|
|
|
qla2x00_sp_free_dma(ha, sp);
|
|
|
|
mempool_free(sp, ha->srb_mempool);
|
|
|
|
cmd->scsi_done(cmd);
|
|
}
|
|
|
|
/**************************************************************************
|
|
* qla2x00_timer
|
|
*
|
|
* Description:
|
|
* One second timer
|
|
*
|
|
* Context: Interrupt
|
|
***************************************************************************/
|
|
void
|
|
qla2x00_timer(scsi_qla_host_t *ha)
|
|
{
|
|
unsigned long cpu_flags = 0;
|
|
fc_port_t *fcport;
|
|
int start_dpc = 0;
|
|
int index;
|
|
srb_t *sp;
|
|
int t;
|
|
scsi_qla_host_t *pha = to_qla_parent(ha);
|
|
|
|
/*
|
|
* Ports - Port down timer.
|
|
*
|
|
* Whenever, a port is in the LOST state we start decrementing its port
|
|
* down timer every second until it reaches zero. Once it reaches zero
|
|
* the port it marked DEAD.
|
|
*/
|
|
t = 0;
|
|
list_for_each_entry(fcport, &ha->fcports, list) {
|
|
if (fcport->port_type != FCT_TARGET)
|
|
continue;
|
|
|
|
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
|
|
|
|
if (atomic_read(&fcport->port_down_timer) == 0)
|
|
continue;
|
|
|
|
if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
|
|
atomic_set(&fcport->state, FCS_DEVICE_DEAD);
|
|
|
|
DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
|
|
"%d remaining\n",
|
|
ha->host_no,
|
|
t, atomic_read(&fcport->port_down_timer)));
|
|
}
|
|
t++;
|
|
} /* End of for fcport */
|
|
|
|
|
|
/* Loop down handler. */
|
|
if (atomic_read(&ha->loop_down_timer) > 0 &&
|
|
!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
|
|
|
|
if (atomic_read(&ha->loop_down_timer) ==
|
|
ha->loop_down_abort_time) {
|
|
|
|
DEBUG(printk("scsi(%ld): Loop Down - aborting the "
|
|
"queues before time expire\n",
|
|
ha->host_no));
|
|
|
|
if (!IS_QLA2100(ha) && ha->link_down_timeout)
|
|
atomic_set(&ha->loop_state, LOOP_DEAD);
|
|
|
|
/* Schedule an ISP abort to return any tape commands. */
|
|
/* NPIV - scan physical port only */
|
|
if (!ha->parent) {
|
|
spin_lock_irqsave(&ha->hardware_lock,
|
|
cpu_flags);
|
|
for (index = 1;
|
|
index < MAX_OUTSTANDING_COMMANDS;
|
|
index++) {
|
|
fc_port_t *sfcp;
|
|
|
|
sp = ha->outstanding_cmds[index];
|
|
if (!sp)
|
|
continue;
|
|
sfcp = sp->fcport;
|
|
if (!(sfcp->flags & FCF_TAPE_PRESENT))
|
|
continue;
|
|
|
|
set_bit(ISP_ABORT_NEEDED,
|
|
&ha->dpc_flags);
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&ha->hardware_lock,
|
|
cpu_flags);
|
|
}
|
|
set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
|
|
start_dpc++;
|
|
}
|
|
|
|
/* if the loop has been down for 4 minutes, reinit adapter */
|
|
if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
|
|
DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
|
|
"restarting queues.\n",
|
|
ha->host_no));
|
|
|
|
set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
|
|
start_dpc++;
|
|
|
|
if (!(ha->device_flags & DFLG_NO_CABLE) &&
|
|
!ha->parent) {
|
|
DEBUG(printk("scsi(%ld): Loop down - "
|
|
"aborting ISP.\n",
|
|
ha->host_no));
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Loop down - aborting ISP.\n");
|
|
|
|
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
|
|
}
|
|
}
|
|
DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
|
|
ha->host_no,
|
|
atomic_read(&ha->loop_down_timer)));
|
|
}
|
|
|
|
/* Check if beacon LED needs to be blinked */
|
|
if (ha->beacon_blink_led == 1) {
|
|
set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
|
|
start_dpc++;
|
|
}
|
|
|
|
/* Process any deferred work. */
|
|
if (!list_empty(&ha->work_list))
|
|
start_dpc++;
|
|
|
|
/* Schedule the DPC routine if needed */
|
|
if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
|
|
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
|
|
test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
|
|
start_dpc ||
|
|
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
|
|
test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
|
|
test_bit(VP_DPC_NEEDED, &ha->dpc_flags) ||
|
|
test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
|
|
qla2xxx_wake_dpc(pha);
|
|
|
|
qla2x00_restart_timer(ha, WATCH_INTERVAL);
|
|
}
|
|
|
|
/* Firmware interface routines. */
|
|
|
|
#define FW_BLOBS 6
|
|
#define FW_ISP21XX 0
|
|
#define FW_ISP22XX 1
|
|
#define FW_ISP2300 2
|
|
#define FW_ISP2322 3
|
|
#define FW_ISP24XX 4
|
|
#define FW_ISP25XX 5
|
|
|
|
#define FW_FILE_ISP21XX "ql2100_fw.bin"
|
|
#define FW_FILE_ISP22XX "ql2200_fw.bin"
|
|
#define FW_FILE_ISP2300 "ql2300_fw.bin"
|
|
#define FW_FILE_ISP2322 "ql2322_fw.bin"
|
|
#define FW_FILE_ISP24XX "ql2400_fw.bin"
|
|
#define FW_FILE_ISP25XX "ql2500_fw.bin"
|
|
|
|
static DEFINE_MUTEX(qla_fw_lock);
|
|
|
|
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
|
|
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
|
|
{ .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
|
|
{ .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
|
|
{ .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
|
|
{ .name = FW_FILE_ISP24XX, },
|
|
{ .name = FW_FILE_ISP25XX, },
|
|
};
|
|
|
|
struct fw_blob *
|
|
qla2x00_request_firmware(scsi_qla_host_t *ha)
|
|
{
|
|
struct fw_blob *blob;
|
|
|
|
blob = NULL;
|
|
if (IS_QLA2100(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP21XX];
|
|
} else if (IS_QLA2200(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP22XX];
|
|
} else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP2300];
|
|
} else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP2322];
|
|
} else if (IS_QLA24XX_TYPE(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP24XX];
|
|
} else if (IS_QLA25XX(ha)) {
|
|
blob = &qla_fw_blobs[FW_ISP25XX];
|
|
}
|
|
|
|
mutex_lock(&qla_fw_lock);
|
|
if (blob->fw)
|
|
goto out;
|
|
|
|
if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
|
|
DEBUG2(printk("scsi(%ld): Failed to load firmware image "
|
|
"(%s).\n", ha->host_no, blob->name));
|
|
blob->fw = NULL;
|
|
blob = NULL;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&qla_fw_lock);
|
|
return blob;
|
|
}
|
|
|
|
static void
|
|
qla2x00_release_firmware(void)
|
|
{
|
|
int idx;
|
|
|
|
mutex_lock(&qla_fw_lock);
|
|
for (idx = 0; idx < FW_BLOBS; idx++)
|
|
if (qla_fw_blobs[idx].fw)
|
|
release_firmware(qla_fw_blobs[idx].fw);
|
|
mutex_unlock(&qla_fw_lock);
|
|
}
|
|
|
|
static pci_ers_result_t
|
|
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
|
|
{
|
|
switch (state) {
|
|
case pci_channel_io_normal:
|
|
return PCI_ERS_RESULT_CAN_RECOVER;
|
|
case pci_channel_io_frozen:
|
|
pci_disable_device(pdev);
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
case pci_channel_io_perm_failure:
|
|
qla2x00_remove_one(pdev);
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
static pci_ers_result_t
|
|
qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
|
|
{
|
|
int risc_paused = 0;
|
|
uint32_t stat;
|
|
unsigned long flags;
|
|
scsi_qla_host_t *ha = pci_get_drvdata(pdev);
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
if (IS_QLA2100(ha) || IS_QLA2200(ha)){
|
|
stat = RD_REG_DWORD(®->hccr);
|
|
if (stat & HCCR_RISC_PAUSE)
|
|
risc_paused = 1;
|
|
} else if (IS_QLA23XX(ha)) {
|
|
stat = RD_REG_DWORD(®->u.isp2300.host_status);
|
|
if (stat & HSR_RISC_PAUSED)
|
|
risc_paused = 1;
|
|
} else if (IS_FWI2_CAPABLE(ha)) {
|
|
stat = RD_REG_DWORD(®24->host_status);
|
|
if (stat & HSRX_RISC_PAUSED)
|
|
risc_paused = 1;
|
|
}
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
|
|
if (risc_paused) {
|
|
qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
|
|
"Dumping firmware!\n");
|
|
ha->isp_ops->fw_dump(ha, 0);
|
|
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
} else
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static pci_ers_result_t
|
|
qla2xxx_pci_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
|
|
scsi_qla_host_t *ha = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
if (ha->mem_only)
|
|
rc = pci_enable_device_mem(pdev);
|
|
else
|
|
rc = pci_enable_device(pdev);
|
|
|
|
if (rc) {
|
|
qla_printk(KERN_WARNING, ha,
|
|
"Can't re-enable PCI device after reset.\n");
|
|
|
|
return ret;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
if (ha->isp_ops->pci_config(ha))
|
|
return ret;
|
|
|
|
set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
|
|
if (qla2x00_abort_isp(ha)== QLA_SUCCESS)
|
|
ret = PCI_ERS_RESULT_RECOVERED;
|
|
clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qla2xxx_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
scsi_qla_host_t *ha = pci_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = qla2x00_wait_for_hba_online(ha);
|
|
if (ret != QLA_SUCCESS) {
|
|
qla_printk(KERN_ERR, ha,
|
|
"the device failed to resume I/O "
|
|
"from slot/link_reset");
|
|
}
|
|
pci_cleanup_aer_uncorrect_error_status(pdev);
|
|
}
|
|
|
|
static struct pci_error_handlers qla2xxx_err_handler = {
|
|
.error_detected = qla2xxx_pci_error_detected,
|
|
.mmio_enabled = qla2xxx_pci_mmio_enabled,
|
|
.slot_reset = qla2xxx_pci_slot_reset,
|
|
.resume = qla2xxx_pci_resume,
|
|
};
|
|
|
|
static struct pci_device_id qla2xxx_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
|
|
{ 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
|
|
|
|
static struct pci_driver qla2xxx_pci_driver = {
|
|
.name = QLA2XXX_DRIVER_NAME,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.id_table = qla2xxx_pci_tbl,
|
|
.probe = qla2x00_probe_one,
|
|
.remove = qla2x00_remove_one,
|
|
.err_handler = &qla2xxx_err_handler,
|
|
};
|
|
|
|
/**
|
|
* qla2x00_module_init - Module initialization.
|
|
**/
|
|
static int __init
|
|
qla2x00_module_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Allocate cache for SRBs. */
|
|
srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
|
|
SLAB_HWCACHE_ALIGN, NULL);
|
|
if (srb_cachep == NULL) {
|
|
printk(KERN_ERR
|
|
"qla2xxx: Unable to allocate SRB cache...Failing load!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Derive version string. */
|
|
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
|
|
if (ql2xextended_error_logging)
|
|
strcat(qla2x00_version_str, "-debug");
|
|
|
|
qla2xxx_transport_template =
|
|
fc_attach_transport(&qla2xxx_transport_functions);
|
|
if (!qla2xxx_transport_template) {
|
|
kmem_cache_destroy(srb_cachep);
|
|
return -ENODEV;
|
|
}
|
|
qla2xxx_transport_vport_template =
|
|
fc_attach_transport(&qla2xxx_transport_vport_functions);
|
|
if (!qla2xxx_transport_vport_template) {
|
|
kmem_cache_destroy(srb_cachep);
|
|
fc_release_transport(qla2xxx_transport_template);
|
|
return -ENODEV;
|
|
}
|
|
|
|
printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
|
|
qla2x00_version_str);
|
|
ret = pci_register_driver(&qla2xxx_pci_driver);
|
|
if (ret) {
|
|
kmem_cache_destroy(srb_cachep);
|
|
fc_release_transport(qla2xxx_transport_template);
|
|
fc_release_transport(qla2xxx_transport_vport_template);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qla2x00_module_exit - Module cleanup.
|
|
**/
|
|
static void __exit
|
|
qla2x00_module_exit(void)
|
|
{
|
|
pci_unregister_driver(&qla2xxx_pci_driver);
|
|
qla2x00_release_firmware();
|
|
kmem_cache_destroy(srb_cachep);
|
|
fc_release_transport(qla2xxx_transport_template);
|
|
fc_release_transport(qla2xxx_transport_vport_template);
|
|
}
|
|
|
|
module_init(qla2x00_module_init);
|
|
module_exit(qla2x00_module_exit);
|
|
|
|
MODULE_AUTHOR("QLogic Corporation");
|
|
MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(QLA2XXX_VERSION);
|
|
MODULE_FIRMWARE(FW_FILE_ISP21XX);
|
|
MODULE_FIRMWARE(FW_FILE_ISP22XX);
|
|
MODULE_FIRMWARE(FW_FILE_ISP2300);
|
|
MODULE_FIRMWARE(FW_FILE_ISP2322);
|
|
MODULE_FIRMWARE(FW_FILE_ISP24XX);
|
|
MODULE_FIRMWARE(FW_FILE_ISP25XX);
|