linux/drivers/acpi/acpica/rslist.c

260 lines
8.4 KiB
C

/*******************************************************************************
*
* Module Name: rslist - Linked list utilities
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acresrc.h"
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rslist")
/*******************************************************************************
*
* FUNCTION: acpi_rs_convert_aml_to_resources
*
* PARAMETERS: acpi_walk_aml_callback
* resource_ptr - Pointer to the buffer that will
* contain the output structures
*
* RETURN: Status
*
* DESCRIPTION: Convert an AML resource to an internal representation of the
* resource that is aligned and easier to access.
*
******************************************************************************/
acpi_status
acpi_rs_convert_aml_to_resources(u8 * aml,
u32 length,
u32 offset, u8 resource_index, void **context)
{
struct acpi_resource **resource_ptr =
ACPI_CAST_INDIRECT_PTR(struct acpi_resource, context);
struct acpi_resource *resource;
union aml_resource *aml_resource;
struct acpi_rsconvert_info *conversion_table;
acpi_status status;
ACPI_FUNCTION_TRACE(rs_convert_aml_to_resources);
/*
* Check that the input buffer and all subsequent pointers into it
* are aligned on a native word boundary. Most important on IA64
*/
resource = *resource_ptr;
if (ACPI_IS_MISALIGNED(resource)) {
ACPI_WARNING((AE_INFO,
"Misaligned resource pointer %p", resource));
}
/* Get the appropriate conversion info table */
aml_resource = ACPI_CAST_PTR(union aml_resource, aml);
if (acpi_ut_get_resource_type(aml) == ACPI_RESOURCE_NAME_SERIAL_BUS) {
if (aml_resource->common_serial_bus.type >
AML_RESOURCE_MAX_SERIALBUSTYPE) {
conversion_table = NULL;
} else {
/* This is an I2C, SPI, or UART serial_bus descriptor */
conversion_table =
acpi_gbl_convert_resource_serial_bus_dispatch
[aml_resource->common_serial_bus.type];
}
} else {
conversion_table =
acpi_gbl_get_resource_dispatch[resource_index];
}
if (!conversion_table) {
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource_index));
return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
/* Convert the AML byte stream resource to a local resource struct */
status =
acpi_rs_convert_aml_to_resource(resource, aml_resource,
conversion_table);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not convert AML resource (Type 0x%X)",
*aml));
return_ACPI_STATUS(status);
}
ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
"Type %.2X, AmlLength %.2X InternalLength %.2X\n",
acpi_ut_get_resource_type(aml), length,
resource->length));
/* Point to the next structure in the output buffer */
*resource_ptr = ACPI_NEXT_RESOURCE(resource);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_rs_convert_resources_to_aml
*
* PARAMETERS: resource - Pointer to the resource linked list
* aml_size_needed - Calculated size of the byte stream
* needed from calling acpi_rs_get_aml_length()
* The size of the output_buffer is
* guaranteed to be >= aml_size_needed
* output_buffer - Pointer to the buffer that will
* contain the byte stream
*
* RETURN: Status
*
* DESCRIPTION: Takes the resource linked list and parses it, creating a
* byte stream of resources in the caller's output buffer
*
******************************************************************************/
acpi_status
acpi_rs_convert_resources_to_aml(struct acpi_resource *resource,
acpi_size aml_size_needed, u8 * output_buffer)
{
u8 *aml = output_buffer;
u8 *end_aml = output_buffer + aml_size_needed;
struct acpi_rsconvert_info *conversion_table;
acpi_status status;
ACPI_FUNCTION_TRACE(rs_convert_resources_to_aml);
/* Walk the resource descriptor list, convert each descriptor */
while (aml < end_aml) {
/* Validate the (internal) Resource Type */
if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
ACPI_ERROR((AE_INFO,
"Invalid descriptor type (0x%X) in resource list",
resource->type));
return_ACPI_STATUS(AE_BAD_DATA);
}
/* Sanity check the length. It must not be zero, or we loop forever */
if (!resource->length) {
ACPI_ERROR((AE_INFO,
"Invalid zero length descriptor in resource list\n"));
return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
}
/* Perform the conversion */
if (resource->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
if (resource->data.common_serial_bus.type >
AML_RESOURCE_MAX_SERIALBUSTYPE) {
conversion_table = NULL;
} else {
/* This is an I2C, SPI, or UART serial_bus descriptor */
conversion_table =
acpi_gbl_convert_resource_serial_bus_dispatch
[resource->data.common_serial_bus.type];
}
} else {
conversion_table =
acpi_gbl_set_resource_dispatch[resource->type];
}
if (!conversion_table) {
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource->type));
return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
status = acpi_rs_convert_resource_to_aml(resource,
ACPI_CAST_PTR(union
aml_resource,
aml),
conversion_table);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not convert resource (type 0x%X) to AML",
resource->type));
return_ACPI_STATUS(status);
}
/* Perform final sanity check on the new AML resource descriptor */
status = acpi_ut_validate_resource(NULL,
ACPI_CAST_PTR(union
aml_resource,
aml), NULL);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Check for end-of-list, normal exit */
if (resource->type == ACPI_RESOURCE_TYPE_END_TAG) {
/* An End Tag indicates the end of the input Resource Template */
return_ACPI_STATUS(AE_OK);
}
/*
* Extract the total length of the new descriptor and set the
* Aml to point to the next (output) resource descriptor
*/
aml += acpi_ut_get_descriptor_length(aml);
/* Point to the next input resource descriptor */
resource = ACPI_NEXT_RESOURCE(resource);
}
/* Completed buffer, but did not find an end_tag resource descriptor */
return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}