OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7d27558c41
linux/arch/arm/plat-omap/dma.c
Santosh Shilimkar 52176e7083 ARM: OMAP: Dispatch only relevant DMA interrupts 
This fixes the spurious interrupt issue on a DMA channel.

In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the
SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of
the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers.
Since there are four sDMA interrupt lines and if more than one
line is actively used by two concurrently running sDMA softwares
modules,then the spurious interrupt can be observed on the other
lines.

Fix in this patch will only dispatch the relevant and enabled
interrupts on a particular line thus perevting spurious IRQ.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00

2461 lines
58 KiB
C
Raw Blame History

/*
* linux/arch/arm/plat-omap/dma.c
*
* Copyright (C) 2003 - 2008 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
* by Imre Deak <imre.deak@nokia.com>
* OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/tc.h>
#undef DEBUG
#ifndef CONFIG_ARCH_OMAP1
enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
};
enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
#endif
#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
static int enable_1510_mode;
struct omap_dma_lch {
int next_lch;
int dev_id;
u16 saved_csr;
u16 enabled_irqs;
const char *dev_name;
void (*callback)(int lch, u16 ch_status, void *data);
void *data;
#ifndef CONFIG_ARCH_OMAP1
/* required for Dynamic chaining */
int prev_linked_ch;
int next_linked_ch;
int state;
int chain_id;
int status;
#endif
long flags;
};
struct dma_link_info {
int *linked_dmach_q;
int no_of_lchs_linked;
int q_count;
int q_tail;
int q_head;
int chain_state;
int chain_mode;
};
static struct dma_link_info *dma_linked_lch;
#ifndef CONFIG_ARCH_OMAP1
/* Chain handling macros */
#define OMAP_DMA_CHAIN_QINIT(chain_id) \
do { \
dma_linked_lch[chain_id].q_head = \
dma_linked_lch[chain_id].q_tail = \
dma_linked_lch[chain_id].q_count = 0; \
} while (0)
#define OMAP_DMA_CHAIN_QFULL(chain_id) \
(dma_linked_lch[chain_id].no_of_lchs_linked == \
dma_linked_lch[chain_id].q_count)
#define OMAP_DMA_CHAIN_QLAST(chain_id) \
do { \
((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
dma_linked_lch[chain_id].q_count) \
} while (0)
#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
(0 == dma_linked_lch[chain_id].q_count)
#define __OMAP_DMA_CHAIN_INCQ(end) \
((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
do { \
__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
dma_linked_lch[chain_id].q_count--; \
} while (0)
#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
do { \
__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
dma_linked_lch[chain_id].q_count++; \
} while (0)
#endif
static int dma_lch_count;
static int dma_chan_count;
static int omap_dma_reserve_channels;
static spinlock_t dma_chan_lock;
static struct omap_dma_lch *dma_chan;
static void __iomem *omap_dma_base;
static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
};
static inline void disable_lnk(int lch);
static void omap_disable_channel_irq(int lch);
static inline void omap_enable_channel_irq(int lch);
#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
__func__);
#define dma_read(reg) \
({ \
u32 __val; \
if (cpu_class_is_omap1()) \
__val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
else \
__val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
__val; \
})
#define dma_write(val, reg) \
({ \
if (cpu_class_is_omap1()) \
__raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
else \
__raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
})
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
int omap_dma_in_1510_mode(void)
{
return enable_1510_mode;
}
#else
#define omap_dma_in_1510_mode() 0
#endif
#ifdef CONFIG_ARCH_OMAP1
static inline int get_gdma_dev(int req)
{
u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
int shift = ((req - 1) % 5) * 6;
return ((omap_readl(reg) >> shift) & 0x3f) + 1;
}
static inline void set_gdma_dev(int req, int dev)
{
u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
int shift = ((req - 1) % 5) * 6;
u32 l;
l = omap_readl(reg);
l &= ~(0x3f << shift);
l |= (dev - 1) << shift;
omap_writel(l, reg);
}
#else
#define set_gdma_dev(req, dev) do {} while (0)
#endif
/* Omap1 only */
static void clear_lch_regs(int lch)
{
int i;
void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
for (i = 0; i < 0x2c; i += 2)
__raw_writew(0, lch_base + i);
}
void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
if (cpu_class_is_omap1()) {
switch (dst_port) {
case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
reg = OMAP_TC_OCPT1_PRIOR;
break;
case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
reg = OMAP_TC_OCPT2_PRIOR;
break;
case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
reg = OMAP_TC_EMIFF_PRIOR;
break;
case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
reg = OMAP_TC_EMIFS_PRIOR;
break;
default:
BUG();
return;
}
l = omap_readl(reg);
l &= ~(0xf << 8);
l |= (priority & 0xf) << 8;
omap_writel(l, reg);
}
if (cpu_class_is_omap2()) {
u32 ccr;
ccr = dma_read(CCR(lch));
if (priority)
ccr |= (1 << 6);
else
ccr &= ~(1 << 6);
dma_write(ccr, CCR(lch));
}
}
EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
int frame_count, int sync_mode,
int dma_trigger, int src_or_dst_synch)
{
u32 l;
l = dma_read(CSDP(lch));
l &= ~0x03;
l |= data_type;
dma_write(l, CSDP(lch));
if (cpu_class_is_omap1()) {
u16 ccr;
ccr = dma_read(CCR(lch));
ccr &= ~(1 << 5);
if (sync_mode == OMAP_DMA_SYNC_FRAME)
ccr |= 1 << 5;
dma_write(ccr, CCR(lch));
ccr = dma_read(CCR2(lch));
ccr &= ~(1 << 2);
if (sync_mode == OMAP_DMA_SYNC_BLOCK)
ccr |= 1 << 2;
dma_write(ccr, CCR2(lch));
}
if (cpu_class_is_omap2() && dma_trigger) {
u32 val;
val = dma_read(CCR(lch));
/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
val &= ~((3 << 19) | 0x1f);
val |= (dma_trigger & ~0x1f) << 14;
val |= dma_trigger & 0x1f;
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
else
val &= ~(1 << 5);
if (sync_mode & OMAP_DMA_SYNC_BLOCK)
val |= 1 << 18;
else
val &= ~(1 << 18);
if (src_or_dst_synch)
val |= 1 << 24; /* source synch */
else
val &= ~(1 << 24); /* dest synch */
dma_write(val, CCR(lch));
}
dma_write(elem_count, CEN(lch));
dma_write(frame_count, CFN(lch));
}
EXPORT_SYMBOL(omap_set_dma_transfer_params);
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
u16 w;
BUG_ON(omap_dma_in_1510_mode());
if (cpu_class_is_omap2()) {
REVISIT_24XX();
return;
}
w = dma_read(CCR2(lch));
w &= ~0x03;
switch (mode) {
case OMAP_DMA_CONSTANT_FILL:
w |= 0x01;
break;
case OMAP_DMA_TRANSPARENT_COPY:
w |= 0x02;
break;
case OMAP_DMA_COLOR_DIS:
break;
default:
BUG();
}
dma_write(w, CCR2(lch));
w = dma_read(LCH_CTRL(lch));
w &= ~0x0f;
/* Default is channel type 2D */
if (mode) {
dma_write((u16)color, COLOR_L(lch));
dma_write((u16)(color >> 16), COLOR_U(lch));
w |= 1; /* Channel type G */
}
dma_write(w, LCH_CTRL(lch));
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
if (cpu_class_is_omap2()) {
u32 csdp;
csdp = dma_read(CSDP(lch));
csdp &= ~(0x3 << 16);
csdp |= (mode << 16);
dma_write(csdp, CSDP(lch));
}
}
EXPORT_SYMBOL(omap_set_dma_write_mode);
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
u32 l;
l = dma_read(LCH_CTRL(lch));
l &= ~0x7;
l |= mode;
dma_write(l, LCH_CTRL(lch));
}
}
EXPORT_SYMBOL(omap_set_dma_channel_mode);
/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
int src_ei, int src_fi)
{
u32 l;
if (cpu_class_is_omap1()) {
u16 w;
w = dma_read(CSDP(lch));
w &= ~(0x1f << 2);
w |= src_port << 2;
dma_write(w, CSDP(lch));
}
l = dma_read(CCR(lch));
l &= ~(0x03 << 12);
l |= src_amode << 12;
dma_write(l, CCR(lch));
if (cpu_class_is_omap1()) {
dma_write(src_start >> 16, CSSA_U(lch));
dma_write((u16)src_start, CSSA_L(lch));
}
if (cpu_class_is_omap2())
dma_write(src_start, CSSA(lch));
dma_write(src_ei, CSEI(lch));
dma_write(src_fi, CSFI(lch));
}
EXPORT_SYMBOL(omap_set_dma_src_params);
void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
{
omap_set_dma_transfer_params(lch, params->data_type,
params->elem_count, params->frame_count,
params->sync_mode, params->trigger,
params->src_or_dst_synch);
omap_set_dma_src_params(lch, params->src_port,
params->src_amode, params->src_start,
params->src_ei, params->src_fi);
omap_set_dma_dest_params(lch, params->dst_port,
params->dst_amode, params->dst_start,
params->dst_ei, params->dst_fi);
if (params->read_prio || params->write_prio)
omap_dma_set_prio_lch(lch, params->read_prio,
params->write_prio);
}
EXPORT_SYMBOL(omap_set_dma_params);
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
if (cpu_class_is_omap2())
return;
dma_write(eidx, CSEI(lch));
dma_write(fidx, CSFI(lch));
}
EXPORT_SYMBOL(omap_set_dma_src_index);
void omap_set_dma_src_data_pack(int lch, int enable)
{
u32 l;
l = dma_read(CSDP(lch));
l &= ~(1 << 6);
if (enable)
l |= (1 << 6);
dma_write(l, CSDP(lch));
}
EXPORT_SYMBOL(omap_set_dma_src_data_pack);
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
unsigned int burst = 0;
u32 l;
l = dma_read(CSDP(lch));
l &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
if (cpu_class_is_omap2())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
if (cpu_class_is_omap2()) {
burst = 0x2;
break;
}
/* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
case OMAP_DMA_DATA_BURST_16:
if (cpu_class_is_omap2()) {
burst = 0x3;
break;
}
/* OMAP1 don't support burst 16
* fall through
*/
default:
BUG();
}
l |= (burst << 7);
dma_write(l, CSDP(lch));
}
EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
unsigned long dest_start,
int dst_ei, int dst_fi)
{
u32 l;
if (cpu_class_is_omap1()) {
l = dma_read(CSDP(lch));
l &= ~(0x1f << 9);
l |= dest_port << 9;
dma_write(l, CSDP(lch));
}
l = dma_read(CCR(lch));
l &= ~(0x03 << 14);
l |= dest_amode << 14;
dma_write(l, CCR(lch));
if (cpu_class_is_omap1()) {
dma_write(dest_start >> 16, CDSA_U(lch));
dma_write(dest_start, CDSA_L(lch));
}
if (cpu_class_is_omap2())
dma_write(dest_start, CDSA(lch));
dma_write(dst_ei, CDEI(lch));
dma_write(dst_fi, CDFI(lch));
}
EXPORT_SYMBOL(omap_set_dma_dest_params);
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
if (cpu_class_is_omap2())
return;
dma_write(eidx, CDEI(lch));
dma_write(fidx, CDFI(lch));
}
EXPORT_SYMBOL(omap_set_dma_dest_index);
void omap_set_dma_dest_data_pack(int lch, int enable)
{
u32 l;
l = dma_read(CSDP(lch));
l &= ~(1 << 13);
if (enable)
l |= 1 << 13;
dma_write(l, CSDP(lch));
}
EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
unsigned int burst = 0;
u32 l;
l = dma_read(CSDP(lch));
l &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
if (cpu_class_is_omap2())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
if (cpu_class_is_omap2())
burst = 0x2;
else
burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
if (cpu_class_is_omap2()) {
burst = 0x3;
break;
}
/* OMAP1 don't support burst 16
* fall through
*/
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
l |= (burst << 14);
dma_write(l, CSDP(lch));
}
EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
static inline void omap_enable_channel_irq(int lch)
{
u32 status;
/* Clear CSR */
if (cpu_class_is_omap1())
status = dma_read(CSR(lch));
else if (cpu_class_is_omap2())
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
/* Enable some nice interrupts. */
dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
}
static void omap_disable_channel_irq(int lch)
{
if (cpu_class_is_omap2())
dma_write(0, CICR(lch));
}
void omap_enable_dma_irq(int lch, u16 bits)
{
dma_chan[lch].enabled_irqs |= bits;
}
EXPORT_SYMBOL(omap_enable_dma_irq);
void omap_disable_dma_irq(int lch, u16 bits)
{
dma_chan[lch].enabled_irqs &= ~bits;
}
EXPORT_SYMBOL(omap_disable_dma_irq);
static inline void enable_lnk(int lch)
{
u32 l;
l = dma_read(CLNK_CTRL(lch));
if (cpu_class_is_omap1())
l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
if (dma_chan[lch].next_lch != -1)
l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2())
if (dma_chan[lch].next_linked_ch != -1)
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
dma_write(l, CLNK_CTRL(lch));
}
static inline void disable_lnk(int lch)
{
u32 l;
l = dma_read(CLNK_CTRL(lch));
/* Disable interrupts */
if (cpu_class_is_omap1()) {
dma_write(0, CICR(lch));
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
if (cpu_class_is_omap2()) {
omap_disable_channel_irq(lch);
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
dma_write(l, CLNK_CTRL(lch));
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
static inline void omap2_enable_irq_lch(int lch)
{
u32 val;
if (!cpu_class_is_omap2())
return;
val = dma_read(IRQENABLE_L0);
val |= 1 << lch;
dma_write(val, IRQENABLE_L0);
}
int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch_out)
{
int ch, free_ch = -1;
unsigned long flags;
struct omap_dma_lch *chan;
spin_lock_irqsave(&dma_chan_lock, flags);
for (ch = 0; ch < dma_chan_count; ch++) {
if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
free_ch = ch;
if (dev_id == 0)
break;
}
}
if (free_ch == -1) {
spin_unlock_irqrestore(&dma_chan_lock, flags);
return -EBUSY;
}
chan = dma_chan + free_ch;
chan->dev_id = dev_id;
if (cpu_class_is_omap1())
clear_lch_regs(free_ch);
if (cpu_class_is_omap2())
omap_clear_dma(free_ch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2()) {
chan->chain_id = -1;
chan->next_linked_ch = -1;
}
#endif
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
if (cpu_class_is_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
else if (cpu_class_is_omap2())
chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
if (dev_id != 0) {
set_gdma_dev(free_ch + 1, dev_id);
dev_id = free_ch + 1;
}
/*
* Disable the 1510 compatibility mode and set the sync device
* id.
*/
dma_write(dev_id | (1 << 10), CCR(free_ch));
} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
dma_write(dev_id, CCR(free_ch));
}
if (cpu_class_is_omap2()) {
omap2_enable_irq_lch(free_ch);
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
dma_write(1 << free_ch, IRQSTATUS_L0);
}
*dma_ch_out = free_ch;
return 0;
}
EXPORT_SYMBOL(omap_request_dma);
void omap_free_dma(int lch)
{
unsigned long flags;
spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
dma_chan[lch].dev_id = -1;
dma_chan[lch].next_lch = -1;
dma_chan[lch].callback = NULL;
spin_unlock_irqrestore(&dma_chan_lock, flags);
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
/* Make sure the DMA transfer is stopped. */
dma_write(0, CCR(lch));
}
if (cpu_class_is_omap2()) {
u32 val;
/* Disable interrupts */
val = dma_read(IRQENABLE_L0);
val &= ~(1 << lch);
dma_write(val, IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
dma_write(1 << lch, IRQSTATUS_L0);
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
/* Make sure the DMA transfer is stopped. */
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
}
EXPORT_SYMBOL(omap_free_dma);
/**
* @brief omap_dma_set_global_params : Set global priority settings for dma
*
* @param arb_rate
* @param max_fifo_depth
* @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
* DMA_THREAD_RESERVE_ONET
* DMA_THREAD_RESERVE_TWOT
* DMA_THREAD_RESERVE_THREET
*/
void
omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
{
u32 reg;
if (!cpu_class_is_omap2()) {
printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
if (arb_rate == 0)
arb_rate = 1;
reg = (arb_rate & 0xff) << 16;
reg |= (0xff & max_fifo_depth);
dma_write(reg, GCR);
}
EXPORT_SYMBOL(omap_dma_set_global_params);
/**
* @brief omap_dma_set_prio_lch : Set channel wise priority settings
*
* @param lch
* @param read_prio - Read priority
* @param write_prio - Write priority
* Both of the above can be set with one of the following values :
* DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
*/
int
omap_dma_set_prio_lch(int lch, unsigned char read_prio,
unsigned char write_prio)
{
u32 l;
if (unlikely((lch < 0 || lch >= dma_lch_count))) {
printk(KERN_ERR "Invalid channel id\n");
return -EINVAL;
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
if (cpu_is_omap2430() || cpu_is_omap34xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
dma_write(l, CCR(lch));
return 0;
}
EXPORT_SYMBOL(omap_dma_set_prio_lch);
/*
* Clears any DMA state so the DMA engine is ready to restart with new buffers
* through omap_start_dma(). Any buffers in flight are discarded.
*/
void omap_clear_dma(int lch)
{
unsigned long flags;
local_irq_save(flags);
if (cpu_class_is_omap1()) {
u32 l;
l = dma_read(CCR(lch));
l &= ~OMAP_DMA_CCR_EN;
dma_write(l, CCR(lch));
/* Clear pending interrupts */
l = dma_read(CSR(lch));
}
if (cpu_class_is_omap2()) {
int i;
void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
for (i = 0; i < 0x44; i += 4)
__raw_writel(0, lch_base + i);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(omap_clear_dma);
void omap_start_dma(int lch)
{
u32 l;
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
dma_chan_link_map[lch] = 1;
/* Set the link register of the first channel */
enable_lnk(lch);
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
cur_lch = dma_chan[lch].next_lch;
do {
next_lch = dma_chan[cur_lch].next_lch;
/* The loop case: we've been here already */
if (dma_chan_link_map[cur_lch])
break;
/* Mark the current channel */
dma_chan_link_map[cur_lch] = 1;
enable_lnk(cur_lch);
omap_enable_channel_irq(cur_lch);
cur_lch = next_lch;
} while (next_lch != -1);
} else if (cpu_class_is_omap2()) {
/* Errata: Need to write lch even if not using chaining */
dma_write(lch, CLNK_CTRL(lch));
}
omap_enable_channel_irq(lch);
l = dma_read(CCR(lch));
/*
* Errata: On ES2.0 BUFFERING disable must be set.
* This will always fail on ES1.0
*/
if (cpu_is_omap24xx())
l |= OMAP_DMA_CCR_EN;
l |= OMAP_DMA_CCR_EN;
dma_write(l, CCR(lch));
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
EXPORT_SYMBOL(omap_start_dma);
void omap_stop_dma(int lch)
{
u32 l;
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
do {
/* The loop case: we've been here already */
if (dma_chan_link_map[cur_lch])
break;
/* Mark the current channel */
dma_chan_link_map[cur_lch] = 1;
disable_lnk(cur_lch);
next_lch = dma_chan[cur_lch].next_lch;
cur_lch = next_lch;
} while (next_lch != -1);
return;
}
/* Disable all interrupts on the channel */
if (cpu_class_is_omap1())
dma_write(0, CICR(lch));
l = dma_read(CCR(lch));
l &= ~OMAP_DMA_CCR_EN;
dma_write(l, CCR(lch));
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
EXPORT_SYMBOL(omap_stop_dma);
/*
* Allows changing the DMA callback function or data. This may be needed if
* the driver shares a single DMA channel for multiple dma triggers.
*/
int omap_set_dma_callback(int lch,
void (*callback)(int lch, u16 ch_status, void *data),
void *data)
{
unsigned long flags;
if (lch < 0)
return -ENODEV;
spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
printk(KERN_ERR "DMA callback for not set for free channel\n");
spin_unlock_irqrestore(&dma_chan_lock, flags);
return -EINVAL;
}
dma_chan[lch].callback = callback;
dma_chan[lch].data = data;
spin_unlock_irqrestore(&dma_chan_lock, flags);
return 0;
}
EXPORT_SYMBOL(omap_set_dma_callback);
/*
* Returns current physical source address for the given DMA channel.
* If the channel is running the caller must disable interrupts prior calling
* this function and process the returned value before re-enabling interrupt to
* prevent races with the interrupt handler. Note that in continuous mode there
* is a chance for CSSA_L register overflow inbetween the two reads resulting
* in incorrect return value.
*/
dma_addr_t omap_get_dma_src_pos(int lch)
{
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
offset = dma_read(CPC(lch));
else
offset = dma_read(CSAC(lch));
/*
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx() && offset == 0)
offset = dma_read(CSAC(lch));
if (cpu_class_is_omap1())
offset |= (dma_read(CSSA_U(lch)) << 16);
return offset;
}
EXPORT_SYMBOL(omap_get_dma_src_pos);
/*
* Returns current physical destination address for the given DMA channel.
* If the channel is running the caller must disable interrupts prior calling
* this function and process the returned value before re-enabling interrupt to
* prevent races with the interrupt handler. Note that in continuous mode there
* is a chance for CDSA_L register overflow inbetween the two reads resulting
* in incorrect return value.
*/
dma_addr_t omap_get_dma_dst_pos(int lch)
{
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
offset = dma_read(CPC(lch));
else
offset = dma_read(CDAC(lch));
/*
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx() && offset == 0)
offset = dma_read(CDAC(lch));
if (cpu_class_is_omap1())
offset |= (dma_read(CDSA_U(lch)) << 16);
return offset;
}
EXPORT_SYMBOL(omap_get_dma_dst_pos);
int omap_get_dma_active_status(int lch)
{
return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
}
EXPORT_SYMBOL(omap_get_dma_active_status);
int omap_dma_running(void)
{
int lch;
/* Check if LCD DMA is running */
if (cpu_is_omap16xx())
if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
return 1;
for (lch = 0; lch < dma_chan_count; lch++)
if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
return 1;
return 0;
}
/*
* lch_queue DMA will start right after lch_head one is finished.
* For this DMA link to start, you still need to start (see omap_start_dma)
* the first one. That will fire up the entire queue.
*/
void omap_dma_link_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
}
if ((dma_chan[lch_head].dev_id == -1) ||
(dma_chan[lch_queue].dev_id == -1)) {
printk(KERN_ERR "omap_dma: trying to link "
"non requested channels\n");
dump_stack();
}
dma_chan[lch_head].next_lch = lch_queue;
}
EXPORT_SYMBOL(omap_dma_link_lch);
/*
* Once the DMA queue is stopped, we can destroy it.
*/
void omap_dma_unlink_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
}
if (dma_chan[lch_head].next_lch != lch_queue ||
dma_chan[lch_head].next_lch == -1) {
printk(KERN_ERR "omap_dma: trying to unlink "
"non linked channels\n");
dump_stack();
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
"before unlinking\n");
dump_stack();
}
dma_chan[lch_head].next_lch = -1;
}
EXPORT_SYMBOL(omap_dma_unlink_lch);
/*----------------------------------------------------------------------------*/
#ifndef CONFIG_ARCH_OMAP1
/* Create chain of DMA channesls */
static void create_dma_lch_chain(int lch_head, int lch_queue)
{
u32 l;
/* Check if this is the first link in chain */
if (dma_chan[lch_head].next_linked_ch == -1) {
dma_chan[lch_head].next_linked_ch = lch_queue;
dma_chan[lch_head].prev_linked_ch = lch_queue;
dma_chan[lch_queue].next_linked_ch = lch_head;
dma_chan[lch_queue].prev_linked_ch = lch_head;
}
/* a link exists, link the new channel in circular chain */
else {
dma_chan[lch_queue].next_linked_ch =
dma_chan[lch_head].next_linked_ch;
dma_chan[lch_queue].prev_linked_ch = lch_head;
dma_chan[lch_head].next_linked_ch = lch_queue;
dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
lch_queue;
}
l = dma_read(CLNK_CTRL(lch_head));
l &= ~(0x1f);
l |= lch_queue;
dma_write(l, CLNK_CTRL(lch_head));
l = dma_read(CLNK_CTRL(lch_queue));
l &= ~(0x1f);
l |= (dma_chan[lch_queue].next_linked_ch);
dma_write(l, CLNK_CTRL(lch_queue));
}
/**
* @brief omap_request_dma_chain : Request a chain of DMA channels
*
* @param dev_id - Device id using the dma channel
* @param dev_name - Device name
* @param callback - Call back function
* @chain_id -
* @no_of_chans - Number of channels requested
* @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
* OMAP_DMA_DYNAMIC_CHAIN
* @params - Channel parameters
*
* @return - Succes : 0
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
void (*callback) (int chain_id, u16 ch_status,
void *data),
int *chain_id, int no_of_chans, int chain_mode,
struct omap_dma_channel_params params)
{
int *channels;
int i, err;
/* Is the chain mode valid ? */
if (chain_mode != OMAP_DMA_STATIC_CHAIN
&& chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
printk(KERN_ERR "Invalid chain mode requested\n");
return -EINVAL;
}
if (unlikely((no_of_chans < 1
|| no_of_chans > dma_lch_count))) {
printk(KERN_ERR "Invalid Number of channels requested\n");
return -EINVAL;
}
/* Allocate a queue to maintain the status of the channels
* in the chain */
channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
if (channels == NULL) {
printk(KERN_ERR "omap_dma: No memory for channel queue\n");
return -ENOMEM;
}
/* request and reserve DMA channels for the chain */
for (i = 0; i < no_of_chans; i++) {
err = omap_request_dma(dev_id, dev_name,
callback, NULL, &channels[i]);
if (err < 0) {
int j;
for (j = 0; j < i; j++)
omap_free_dma(channels[j]);
kfree(channels);
printk(KERN_ERR "omap_dma: Request failed %d\n", err);
return err;
}
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
/*
* Allowing client drivers to set common parameters now,
* so that later only relevant (src_start, dest_start
* and element count) can be set
*/
omap_set_dma_params(channels[i], &params);
}
*chain_id = channels[0];
dma_linked_lch[*chain_id].linked_dmach_q = channels;
dma_linked_lch[*chain_id].chain_mode = chain_mode;
dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
for (i = 0; i < no_of_chans; i++)
dma_chan[channels[i]].chain_id = *chain_id;
/* Reset the Queue pointers */
OMAP_DMA_CHAIN_QINIT(*chain_id);
/* Set up the chain */
if (no_of_chans == 1)
create_dma_lch_chain(channels[0], channels[0]);
else {
for (i = 0; i < (no_of_chans - 1); i++)
create_dma_lch_chain(channels[i], channels[i + 1]);
}
return 0;
}
EXPORT_SYMBOL(omap_request_dma_chain);
/**
* @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
* params after setting it. Dont do this while dma is running!!
*
* @param chain_id - Chained logical channel id.
* @param params
*
* @return - Success : 0
* Failure : -EINVAL
*/
int omap_modify_dma_chain_params(int chain_id,
struct omap_dma_channel_params params)
{
int *channels;
u32 i;
/* Check for input params */
if (unlikely((chain_id < 0
|| chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
/*
* Allowing client drivers to set common parameters now,
* so that later only relevant (src_start, dest_start
* and element count) can be set
*/
omap_set_dma_params(channels[i], &params);
}
return 0;
}
EXPORT_SYMBOL(omap_modify_dma_chain_params);
/**
* @brief omap_free_dma_chain - Free all the logical channels in a chain.
*
* @param chain_id
*
* @return - Success : 0
* Failure : -EINVAL
*/
int omap_free_dma_chain(int chain_id)
{
int *channels;
u32 i;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
dma_chan[channels[i]].next_linked_ch = -1;
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].chain_id = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
omap_free_dma(channels[i]);
}
kfree(channels);
dma_linked_lch[chain_id].linked_dmach_q = NULL;
dma_linked_lch[chain_id].chain_mode = -1;
dma_linked_lch[chain_id].chain_state = -1;
return (0);
}
EXPORT_SYMBOL(omap_free_dma_chain);
/**
* @brief omap_dma_chain_status - Check if the chain is in
* active / inactive state.
* @param chain_id
*
* @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
* Failure : -EINVAL
*/
int omap_dma_chain_status(int chain_id)
{
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
dma_linked_lch[chain_id].q_count);
if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
return OMAP_DMA_CHAIN_INACTIVE;
return OMAP_DMA_CHAIN_ACTIVE;
}
EXPORT_SYMBOL(omap_dma_chain_status);
/**
* @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
* set the params and start the transfer.
*
* @param chain_id
* @param src_start - buffer start address
* @param dest_start - Dest address
* @param elem_count
* @param frame_count
* @param callbk_data - channel callback parameter data.
*
* @return - Success : 0
* Failure: -EINVAL/-EBUSY
*/
int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
int elem_count, int frame_count, void *callbk_data)
{
int *channels;
u32 l, lch;
int start_dma = 0;
/*
* if buffer size is less than 1 then there is
* no use of starting the chain
*/
if (elem_count < 1) {
printk(KERN_ERR "Invalid buffer size\n");
return -EINVAL;
}
/* Check for input params */
if (unlikely((chain_id < 0
|| chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exist\n");
return -EINVAL;
}
/* Check if all the channels in chain are in use */
if (OMAP_DMA_CHAIN_QFULL(chain_id))
return -EBUSY;
/* Frame count may be negative in case of indexed transfers */
channels = dma_linked_lch[chain_id].linked_dmach_q;
/* Get a free channel */
lch = channels[dma_linked_lch[chain_id].q_tail];
/* Store the callback data */
dma_chan[lch].data = callbk_data;
/* Increment the q_tail */
OMAP_DMA_CHAIN_INCQTAIL(chain_id);
/* Set the params to the free channel */
if (src_start != 0)
dma_write(src_start, CSSA(lch));
if (dest_start != 0)
dma_write(dest_start, CDSA(lch));
/* Write the buffer size */
dma_write(elem_count, CEN(lch));
dma_write(frame_count, CFN(lch));
/*
* If the chain is dynamically linked,
* then we may have to start the chain if its not active
*/
if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
/*
* In Dynamic chain, if the chain is not started,
* queue the channel
*/
if (dma_linked_lch[chain_id].chain_state ==
DMA_CHAIN_NOTSTARTED) {
/* Enable the link in previous channel */
if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
DMA_CH_QUEUED)
enable_lnk(dma_chan[lch].prev_linked_ch);
dma_chan[lch].state = DMA_CH_QUEUED;
}
/*
* Chain is already started, make sure its active,
* if not then start the chain
*/
else {
start_dma = 1;
if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
DMA_CH_STARTED) {
enable_lnk(dma_chan[lch].prev_linked_ch);
dma_chan[lch].state = DMA_CH_QUEUED;
start_dma = 0;
if (0 == ((1 << 7) & dma_read(
CCR(dma_chan[lch].prev_linked_ch)))) {
disable_lnk(dma_chan[lch].
prev_linked_ch);
pr_debug("\n prev ch is stopped\n");
start_dma = 1;
}
}
else if (dma_chan[dma_chan[lch].prev_linked_ch].state
== DMA_CH_QUEUED) {
enable_lnk(dma_chan[lch].prev_linked_ch);
dma_chan[lch].state = DMA_CH_QUEUED;
start_dma = 0;
}
omap_enable_channel_irq(lch);
l = dma_read(CCR(lch));
if ((0 == (l & (1 << 24))))
l &= ~(1 << 25);
else
l |= (1 << 25);
if (start_dma == 1) {
if (0 == (l & (1 << 7))) {
l |= (1 << 7);
dma_chan[lch].state = DMA_CH_STARTED;
pr_debug("starting %d\n", lch);
dma_write(l, CCR(lch));
} else
start_dma = 0;
} else {
if (0 == (l & (1 << 7)))
dma_write(l, CCR(lch));
}
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
}
return 0;
}
EXPORT_SYMBOL(omap_dma_chain_a_transfer);
/**
* @brief omap_start_dma_chain_transfers - Start the chain
*
* @param chain_id
*
* @return - Success : 0
* Failure : -EINVAL/-EBUSY
*/
int omap_start_dma_chain_transfers(int chain_id)
{
int *channels;
u32 l, i;
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
printk(KERN_ERR "Chain is already started\n");
return -EBUSY;
}
if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
i++) {
enable_lnk(channels[i]);
omap_enable_channel_irq(channels[i]);
}
} else {
omap_enable_channel_irq(channels[0]);
}
l = dma_read(CCR(channels[0]));
l |= (1 << 7);
dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
dma_chan[channels[0]].state = DMA_CH_STARTED;
if ((0 == (l & (1 << 24))))
l &= ~(1 << 25);
else
l |= (1 << 25);
dma_write(l, CCR(channels[0]));
dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
return 0;
}
EXPORT_SYMBOL(omap_start_dma_chain_transfers);
/**
* @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
*
* @param chain_id
*
* @return - Success : 0
* Failure : EINVAL
*/
int omap_stop_dma_chain_transfers(int chain_id)
{
int *channels;
u32 l, i;
u32 sys_cf;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
/*
* DMA Errata:
* Special programming model needed to disable DMA before end of block
*/
sys_cf = dma_read(OCP_SYSCONFIG);
l = sys_cf;
/* Middle mode reg set no Standby */
l &= ~((1 << 12)|(1 << 13));
dma_write(l, OCP_SYSCONFIG);
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
/* Stop the Channel transmission */
l = dma_read(CCR(channels[i]));
l &= ~(1 << 7);
dma_write(l, CCR(channels[i]));
/* Disable the link in all the channels */
disable_lnk(channels[i]);
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
}
dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
/* Reset the Queue pointers */
OMAP_DMA_CHAIN_QINIT(chain_id);
/* Errata - put in the old value */
dma_write(sys_cf, OCP_SYSCONFIG);
return 0;
}
EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
/* Get the index of the ongoing DMA in chain */
/**
* @brief omap_get_dma_chain_index - Get the element and frame index
* of the ongoing DMA in chain
*
* @param chain_id
* @param ei - Element index
* @param fi - Frame index
*
* @return - Success : 0
* Failure : -EINVAL
*/
int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
{
int lch;
int *channels;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
if ((!ei) || (!fi))
return -EINVAL;
channels = dma_linked_lch[chain_id].linked_dmach_q;
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
*ei = dma_read(CCEN(lch));
*fi = dma_read(CCFN(lch));
return 0;
}
EXPORT_SYMBOL(omap_get_dma_chain_index);
/**
* @brief omap_get_dma_chain_dst_pos - Get the destination position of the
* ongoing DMA in chain
*
* @param chain_id
*
* @return - Success : Destination position
* Failure : -EINVAL
*/
int omap_get_dma_chain_dst_pos(int chain_id)
{
int lch;
int *channels;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
return dma_read(CDAC(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
/**
* @brief omap_get_dma_chain_src_pos - Get the source position
* of the ongoing DMA in chain
* @param chain_id
*
* @return - Success : Destination position
* Failure : -EINVAL
*/
int omap_get_dma_chain_src_pos(int chain_id)
{
int lch;
int *channels;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
printk(KERN_ERR "Invalid chain id\n");
return -EINVAL;
}
/* Check if the chain exists */
if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
printk(KERN_ERR "Chain doesn't exists\n");
return -EINVAL;
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
return dma_read(CSAC(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
#endif /* ifndef CONFIG_ARCH_OMAP1 */
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP1
static int omap1_dma_handle_ch(int ch)
{
u32 csr;
if (enable_1510_mode && ch >= 6) {
csr = dma_chan[ch].saved_csr;
dma_chan[ch].saved_csr = 0;
} else
csr = dma_read(CSR(ch));
if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
dma_chan[ch + 6].saved_csr = csr >> 7;
csr &= 0x7f;
}
if ((csr & 0x3f) == 0)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1)) {
printk(KERN_WARNING "Spurious interrupt from DMA channel "
"%d (CSR %04x)\n", ch, csr);
return 0;
}
if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
printk(KERN_WARNING "DMA synchronization event drop occurred "
"with device %d\n", dma_chan[ch].dev_id);
if (likely(csr & OMAP_DMA_BLOCK_IRQ))
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
return 1;
}
static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
{
int ch = ((int) dev_id) - 1;
int handled = 0;
for (;;) {
int handled_now = 0;
handled_now += omap1_dma_handle_ch(ch);
if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
handled_now += omap1_dma_handle_ch(ch + 6);
if (!handled_now)
break;
handled += handled_now;
}
return handled ? IRQ_HANDLED : IRQ_NONE;
}
#else
#define omap1_dma_irq_handler NULL
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static int omap2_dma_handle_ch(int ch)
{
u32 status = dma_read(CSR(ch));
if (!status) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
ch);
dma_write(1 << ch, IRQSTATUS_L0);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
if (printk_ratelimit())
printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
"channel %d\n", status, ch);
return 0;
}
if (unlikely(status & OMAP_DMA_DROP_IRQ))
printk(KERN_INFO
"DMA synchronization event drop occurred with device "
"%d\n", dma_chan[ch].dev_id);
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
if (cpu_class_is_omap2()) {
/* Errata: sDMA Channel is not disabled
* after a transaction error. So we explicitely
* disable the channel
*/
u32 ccr;
ccr = dma_read(CCR(ch));
ccr &= ~OMAP_DMA_CCR_EN;
dma_write(ccr, CCR(ch));
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
}
}
if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
printk(KERN_INFO "DMA secure error with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
printk(KERN_INFO "DMA misaligned error with device %d\n",
dma_chan[ch].dev_id);
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
dma_write(1 << ch, IRQSTATUS_L0);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
int chain_id = dma_chan[ch].chain_id;
dma_chan[ch].state = DMA_CH_NOTSTARTED;
if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
dma_chan[dma_chan[ch].next_linked_ch].state =
DMA_CH_STARTED;
if (dma_linked_lch[chain_id].chain_mode ==
OMAP_DMA_DYNAMIC_CHAIN)
disable_lnk(ch);
if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
OMAP_DMA_CHAIN_INCQHEAD(chain_id);
status = dma_read(CSR(ch));
}
dma_write(status, CSR(ch));
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
return 0;
}
/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
u32 val, enable_reg;
int i;
val = dma_read(IRQSTATUS_L0);
if (val == 0) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
enable_reg = dma_read(IRQENABLE_L0);
val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
val >>= 1;
}
return IRQ_HANDLED;
}
static struct irqaction omap24xx_dma_irq = {
.name = "DMA",
.handler = omap2_dma_irq_handler,
.flags = IRQF_DISABLED
};
#else
static struct irqaction omap24xx_dma_irq;
#endif
/*----------------------------------------------------------------------------*/
static struct lcd_dma_info {
spinlock_t lock;
int reserved;
void (*callback)(u16 status, void *data);
void *cb_data;
int active;
unsigned long addr, size;
int rotate, data_type, xres, yres;
int vxres;
int mirror;
int xscale, yscale;
int ext_ctrl;
int src_port;
int single_transfer;
} lcd_dma;
void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
int data_type)
{
lcd_dma.addr = addr;
lcd_dma.data_type = data_type;
lcd_dma.xres = fb_xres;
lcd_dma.yres = fb_yres;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1);
void omap_set_lcd_dma_src_port(int port)
{
lcd_dma.src_port = port;
}
void omap_set_lcd_dma_ext_controller(int external)
{
lcd_dma.ext_ctrl = external;
}
EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
void omap_set_lcd_dma_single_transfer(int single)
{
lcd_dma.single_transfer = single;
}
EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
void omap_set_lcd_dma_b1_rotation(int rotate)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
BUG();
return;
}
lcd_dma.rotate = rotate;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
void omap_set_lcd_dma_b1_mirror(int mirror)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
BUG();
}
lcd_dma.mirror = mirror;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA virtual resulotion is not supported "
"in 1510 mode\n");
BUG();
}
lcd_dma.vxres = vxres;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
if (omap_dma_in_1510_mode()) {
printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
BUG();
}
lcd_dma.xscale = xscale;
lcd_dma.yscale = yscale;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
static void set_b1_regs(void)
{
unsigned long top, bottom;
int es;
u16 w;
unsigned long en, fn;
long ei, fi;
unsigned long vxres;
unsigned int xscale, yscale;
switch (lcd_dma.data_type) {
case OMAP_DMA_DATA_TYPE_S8:
es = 1;
break;
case OMAP_DMA_DATA_TYPE_S16:
es = 2;
break;
case OMAP_DMA_DATA_TYPE_S32:
es = 4;
break;
default:
BUG();
return;
}
vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
BUG_ON(vxres < lcd_dma.xres);
#define PIXADDR(x, y) (lcd_dma.addr + \
((y) * vxres * yscale + (x) * xscale) * es)
#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
switch (lcd_dma.rotate) {
case 0:
if (!lcd_dma.mirror) {
top = PIXADDR(0, 0);
bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
/* 1510 DMA requires the bottom address to be 2 more
* than the actual last memory access location. */
if (omap_dma_in_1510_mode() &&
lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
bottom += 2;
ei = PIXSTEP(0, 0, 1, 0);
fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
} else {
top = PIXADDR(lcd_dma.xres - 1, 0);
bottom = PIXADDR(0, lcd_dma.yres - 1);
ei = PIXSTEP(1, 0, 0, 0);
fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
}
en = lcd_dma.xres;
fn = lcd_dma.yres;
break;
case 90:
if (!lcd_dma.mirror) {
top = PIXADDR(0, lcd_dma.yres - 1);
bottom = PIXADDR(lcd_dma.xres - 1, 0);
ei = PIXSTEP(0, 1, 0, 0);
fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
} else {
top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
bottom = PIXADDR(0, 0);
ei = PIXSTEP(0, 1, 0, 0);
fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
}
en = lcd_dma.yres;
fn = lcd_dma.xres;
break;
case 180:
if (!lcd_dma.mirror) {
top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
bottom = PIXADDR(0, 0);
ei = PIXSTEP(1, 0, 0, 0);
fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
} else {
top = PIXADDR(0, lcd_dma.yres - 1);
bottom = PIXADDR(lcd_dma.xres - 1, 0);
ei = PIXSTEP(0, 0, 1, 0);
fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
}
en = lcd_dma.xres;
fn = lcd_dma.yres;
break;
case 270:
if (!lcd_dma.mirror) {
top = PIXADDR(lcd_dma.xres - 1, 0);
bottom = PIXADDR(0, lcd_dma.yres - 1);
ei = PIXSTEP(0, 0, 0, 1);
fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
} else {
top = PIXADDR(0, 0);
bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
ei = PIXSTEP(0, 0, 0, 1);
fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
}
en = lcd_dma.yres;
fn = lcd_dma.xres;
break;
default:
BUG();
return; /* Suppress warning about uninitialized vars */
}
if (omap_dma_in_1510_mode()) {
omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
return;
}
/* 1610 regs */
omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
w = omap_readw(OMAP1610_DMA_LCD_CSDP);
w &= ~0x03;
w |= lcd_dma.data_type;
omap_writew(w, OMAP1610_DMA_LCD_CSDP);
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
/* Always set the source port as SDRAM for now*/
w &= ~(0x03 << 6);
if (lcd_dma.callback != NULL)
w |= 1 << 1; /* Block interrupt enable */
else
w &= ~(1 << 1);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
if (!(lcd_dma.rotate || lcd_dma.mirror ||
lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
return;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
/* Set the double-indexed addressing mode */
w |= (0x03 << 12);
omap_writew(w, OMAP1610_DMA_LCD_CCR);
omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
}
static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
{
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
if (unlikely(!(w & (1 << 3)))) {
printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
return IRQ_NONE;
}
/* Ack the IRQ */
w |= (1 << 3);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
lcd_dma.active = 0;
if (lcd_dma.callback != NULL)
lcd_dma.callback(w, lcd_dma.cb_data);
return IRQ_HANDLED;
}
int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
void *data)
{
spin_lock_irq(&lcd_dma.lock);
if (lcd_dma.reserved) {
spin_unlock_irq(&lcd_dma.lock);
printk(KERN_ERR "LCD DMA channel already reserved\n");
BUG();
return -EBUSY;
}
lcd_dma.reserved = 1;
spin_unlock_irq(&lcd_dma.lock);
lcd_dma.callback = callback;
lcd_dma.cb_data = data;
lcd_dma.active = 0;
lcd_dma.single_transfer = 0;
lcd_dma.rotate = 0;
lcd_dma.vxres = 0;
lcd_dma.mirror = 0;
lcd_dma.xscale = 0;
lcd_dma.yscale = 0;
lcd_dma.ext_ctrl = 0;
lcd_dma.src_port = 0;
return 0;
}
EXPORT_SYMBOL(omap_request_lcd_dma);
void omap_free_lcd_dma(void)
{
spin_lock(&lcd_dma.lock);
if (!lcd_dma.reserved) {
spin_unlock(&lcd_dma.lock);
printk(KERN_ERR "LCD DMA is not reserved\n");
BUG();
return;
}
if (!enable_1510_mode)
omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
OMAP1610_DMA_LCD_CCR);
lcd_dma.reserved = 0;
spin_unlock(&lcd_dma.lock);
}
EXPORT_SYMBOL(omap_free_lcd_dma);
void omap_enable_lcd_dma(void)
{
u16 w;
/*
* Set the Enable bit only if an external controller is
* connected. Otherwise the OMAP internal controller will
* start the transfer when it gets enabled.
*/
if (enable_1510_mode || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
w |= 1 << 8;
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
lcd_dma.active = 1;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
w |= 1 << 7;
omap_writew(w, OMAP1610_DMA_LCD_CCR);
}
EXPORT_SYMBOL(omap_enable_lcd_dma);
void omap_setup_lcd_dma(void)
{
BUG_ON(lcd_dma.active);
if (!enable_1510_mode) {
/* Set some reasonable defaults */
omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
}
set_b1_regs();
if (!enable_1510_mode) {
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
/*
* If DMA was already active set the end_prog bit to have
* the programmed register set loaded into the active
* register set.
*/
w |= 1 << 11; /* End_prog */
if (!lcd_dma.single_transfer)
w |= (3 << 8); /* Auto_init, repeat */
omap_writew(w, OMAP1610_DMA_LCD_CCR);
}
}
EXPORT_SYMBOL(omap_setup_lcd_dma);
void omap_stop_lcd_dma(void)
{
u16 w;
lcd_dma.active = 0;
if (enable_1510_mode || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
w &= ~(1 << 7);
omap_writew(w, OMAP1610_DMA_LCD_CCR);
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
w &= ~(1 << 8);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
EXPORT_SYMBOL(omap_stop_lcd_dma);
/*----------------------------------------------------------------------------*/
static int __init omap_init_dma(void)
{
int ch, r;
if (cpu_class_is_omap1()) {
omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
}
if (cpu_class_is_omap2() && omap_dma_reserve_channels
&& (omap_dma_reserve_channels <= dma_lch_count))
dma_lch_count = omap_dma_reserve_channels;
dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
GFP_KERNEL);
if (!dma_chan)
return -ENOMEM;
if (cpu_class_is_omap2()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
kfree(dma_chan);
return -ENOMEM;
}
}
if (cpu_is_omap15xx()) {
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
} else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
dma_read(HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
(dma_read(CAPS_0_U) << 16) |
dma_read(CAPS_0_L),
(dma_read(CAPS_1_U) << 16) |
dma_read(CAPS_1_L),
dma_read(CAPS_2), dma_read(CAPS_3),
dma_read(CAPS_4));
if (!enable_1510_mode) {
u16 w;
/* Disable OMAP 3.0/3.1 compatibility mode. */
w = dma_read(GSCR);
w |= 1 << 3;
dma_write(w, GSCR);
dma_chan_count = 16;
} else
dma_chan_count = 9;
if (cpu_is_omap16xx()) {
u16 w;
/* this would prevent OMAP sleep */
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
w &= ~(1 << 8);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
} else if (cpu_class_is_omap2()) {
u8 revision = dma_read(REVISION) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
revision >> 4, revision & 0xf);
dma_chan_count = dma_lch_count;
} else {
dma_chan_count = 0;
return 0;
}
spin_lock_init(&lcd_dma.lock);
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
if (ch >= 6 && enable_1510_mode)
continue;
if (cpu_class_is_omap1()) {
/*
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
*/
r = request_irq(omap1_dma_irq[ch],
omap1_dma_irq_handler, 0, "DMA",
(void *) (ch + 1));
if (r != 0) {
int i;
printk(KERN_ERR "unable to request IRQ %d "
"for DMA (error %d)\n",
omap1_dma_irq[ch], r);
for (i = 0; i < ch; i++)
free_irq(omap1_dma_irq[i],
(void *) (i + 1));
return r;
}
}
}
if (cpu_is_omap2430() || cpu_is_omap34xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
if (cpu_class_is_omap2())
setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
"LCD DMA", NULL);
if (r != 0) {
int i;
printk(KERN_ERR "unable to request IRQ for LCD DMA "
"(error %d)\n", r);
for (i = 0; i < dma_chan_count; i++)
free_irq(omap1_dma_irq[i], (void *) (i + 1));
return r;
}
}
return 0;
}
arch_initcall(omap_init_dma);
/*
* Reserve the omap SDMA channels using cmdline bootarg
* "omap_dma_reserve_ch=". The valid range is 1 to 32
*/
static int __init omap_dma_cmdline_reserve_ch(char *str)
{
if (get_option(&str, &omap_dma_reserve_channels) != 1)
omap_dma_reserve_channels = 0;
return 1;
}
__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
Reference in New Issue View Git Blame Copy Permalink