linux/arch/arm/boot/dts/imx25.dtsi

516 lines
12 KiB
Plaintext

/*
* Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
usb0 = &usbotg;
usb1 = &usbhost1;
};
asic: asic-interrupt-controller@68000000 {
compatible = "fsl,imx25-asic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x68000000 0x8000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&asic>;
ranges;
aips@43f00000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x43f00000 0x100000>;
ranges;
i2c1: i2c@43f80000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f80000 0x4000>;
clocks = <&clks 48>;
clock-names = "";
interrupts = <3>;
status = "disabled";
};
i2c3: i2c@43f84000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f84000 0x4000>;
clocks = <&clks 48>;
clock-names = "";
interrupts = <10>;
status = "disabled";
};
can1: can@43f88000 {
compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
reg = <0x43f88000 0x4000>;
interrupts = <43>;
clocks = <&clks 75>, <&clks 75>;
clock-names = "ipg", "per";
status = "disabled";
};
can2: can@43f8c000 {
compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
reg = <0x43f8c000 0x4000>;
interrupts = <44>;
clocks = <&clks 76>, <&clks 76>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@43f90000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
clocks = <&clks 120>, <&clks 57>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@43f94000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x43f94000 0x4000>;
interrupts = <32>;
clocks = <&clks 121>, <&clks 57>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@43f98000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f98000 0x4000>;
clocks = <&clks 48>;
clock-names = "";
interrupts = <4>;
status = "disabled";
};
owire@43f9c000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x43f9c000 0x4000>;
clocks = <&clks 51>;
clock-names = "";
interrupts = <2>;
status = "disabled";
};
spi1: cspi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
clocks = <&clks 62>;
clock-names = "ipg";
interrupts = <14>;
status = "disabled";
};
kpp@43fa8000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x43fa8000 0x4000>;
clocks = <&clks 102>;
clock-names = "";
interrupts = <24>;
status = "disabled";
};
iomuxc@43fac000{
compatible = "fsl,imx25-iomuxc";
reg = <0x43fac000 0x4000>;
};
audmux@43fb0000 {
compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
reg = <0x43fb0000 0x4000>;
status = "disabled";
};
};
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
spi3: cspi@50004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50004000 0x4000>;
interrupts = <0>;
clocks = <&clks 80>;
clock-names = "ipg";
status = "disabled";
};
uart4: serial@50008000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x50008000 0x4000>;
interrupts = <5>;
clocks = <&clks 123>, <&clks 57>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@5000c000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <18>;
clocks = <&clks 122>, <&clks 57>;
clock-names = "ipg", "per";
status = "disabled";
};
spi2: cspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50010000 0x4000>;
clocks = <&clks 79>;
clock-names = "ipg";
interrupts = <13>;
status = "disabled";
};
ssi2: ssi@50014000 {
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <11>;
status = "disabled";
};
esai@50018000 {
reg = <0x50018000 0x4000>;
interrupts = <7>;
};
uart5: serial@5002c000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x5002c000 0x4000>;
interrupts = <40>;
clocks = <&clks 124>, <&clks 57>;
clock-names = "ipg", "per";
status = "disabled";
};
tsc: tsc@50030000 {
compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
reg = <0x50030000 0x4000>;
interrupts = <46>;
clocks = <&clks 119>;
clock-names = "ipg";
status = "disabled";
};
ssi1: ssi@50034000 {
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50034000 0x4000>;
interrupts = <12>;
status = "disabled";
};
fec: ethernet@50038000 {
compatible = "fsl,imx25-fec";
reg = <0x50038000 0x4000>;
interrupts = <57>;
clocks = <&clks 88>, <&clks 65>;
clock-names = "ipg", "ahb";
status = "disabled";
};
};
aips@53f00000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x53f00000 0x100000>;
ranges;
clks: ccm@53f80000 {
compatible = "fsl,imx25-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>;
#clock-cells = <1>;
};
gpt4: timer@53f84000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f84000 0x4000>;
clocks = <&clks 9>, <&clks 45>;
clock-names = "ipg", "per";
interrupts = <1>;
};
gpt3: timer@53f88000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f88000 0x4000>;
clocks = <&clks 9>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <29>;
};
gpt2: timer@53f8c000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f8c000 0x4000>;
clocks = <&clks 9>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <53>;
};
gpt1: timer@53f90000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f90000 0x4000>;
clocks = <&clks 9>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <54>;
};
epit1: timer@53f94000 {
compatible = "fsl,imx25-epit";
reg = <0x53f94000 0x4000>;
interrupts = <28>;
};
epit2: timer@53f98000 {
compatible = "fsl,imx25-epit";
reg = <0x53f98000 0x4000>;
interrupts = <27>;
};
gpio4: gpio@53f9c000 {
compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
reg = <0x53f9c000 0x4000>;
interrupts = <23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pwm2: pwm@53fa0000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fa0000 0x4000>;
clocks = <&clks 106>, <&clks 36>;
clock-names = "ipg", "per";
interrupts = <36>;
};
gpio3: gpio@53fa4000 {
compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
reg = <0x53fa4000 0x4000>;
interrupts = <16>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pwm3: pwm@53fa8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fa8000 0x4000>;
clocks = <&clks 107>, <&clks 36>;
clock-names = "ipg", "per";
interrupts = <41>;
};
esdhc1: esdhc@53fb4000 {
compatible = "fsl,imx25-esdhc";
reg = <0x53fb4000 0x4000>;
interrupts = <9>;
clocks = <&clks 86>, <&clks 63>, <&clks 45>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
esdhc2: esdhc@53fb8000 {
compatible = "fsl,imx25-esdhc";
reg = <0x53fb8000 0x4000>;
interrupts = <8>;
clocks = <&clks 87>, <&clks 64>, <&clks 46>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
lcdc@53fbc000 {
reg = <0x53fbc000 0x4000>;
interrupts = <39>;
clocks = <&clks 103>, <&clks 66>, <&clks 49>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
slcdc@53fc0000 {
reg = <0x53fc0000 0x4000>;
interrupts = <38>;
status = "disabled";
};
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 36>;
clock-names = "ipg", "per";
interrupts = <42>;
};
gpio1: gpio@53fcc000 {
compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
reg = <0x53fcc000 0x4000>;
interrupts = <52>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@53fd0000 {
compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
reg = <0x53fd0000 0x4000>;
interrupts = <51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sdma@53fd4000 {
compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
reg = <0x53fd4000 0x4000>;
clocks = <&clks 112>, <&clks 68>;
clock-names = "ipg", "ahb";
interrupts = <34>;
};
wdog@53fdc000 {
compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
reg = <0x53fdc000 0x4000>;
clocks = <&clks 126>;
clock-names = "";
interrupts = <55>;
};
pwm1: pwm@53fe0000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fe0000 0x4000>;
clocks = <&clks 105>, <&clks 36>;
clock-names = "ipg", "per";
interrupts = <26>;
};
usbphy1: usbphy@1 {
compatible = "nop-usbphy";
status = "disabled";
};
usbphy2: usbphy@2 {
compatible = "nop-usbphy";
status = "disabled";
};
usbotg: usb@53ff4000 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
usbhost1: usb@53ff4400 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
usbmisc: usbmisc@53ff4600 {
#index-cells = <1>;
compatible = "fsl,imx25-usbmisc";
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
reg = <0x53ff4600 0x00f>;
status = "disabled";
};
dryice@53ffc000 {
compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
reg = <0x53ffc000 0x4000>;
clocks = <&clks 81>;
clock-names = "ipg";
interrupts = <25>;
};
};
emi@80000000 {
compatible = "fsl,emi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80000000 0x3b002000>;
ranges;
nfc: nand@bb000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx25-nand";
reg = <0xbb000000 0x2000>;
clocks = <&clks 50>;
clock-names = "";
interrupts = <33>;
status = "disabled";
};
};
};
};