e7db06b5d5
Move some common spi_setup() error checks into the SPI framework from the spi_master controller drivers: - Add a new "mode_bits" field to spi_master - Use that in spi_setup to validate the spi->mode value being requested. Setting this new field is now mandatory for any controller supporting more than vanilla SPI_MODE_0. - Update all spi_master drivers to: * Initialize that field * Remove current spi_setup() checks using that value. This is a net minor code shrink. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
472 lines
9.9 KiB
C
472 lines
9.9 KiB
C
/* linux/drivers/spi/spi_s3c24xx.c
|
|
*
|
|
* Copyright (c) 2006 Ben Dooks
|
|
* Copyright (c) 2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <plat/regs-spi.h>
|
|
#include <mach/spi.h>
|
|
|
|
struct s3c24xx_spi {
|
|
/* bitbang has to be first */
|
|
struct spi_bitbang bitbang;
|
|
struct completion done;
|
|
|
|
void __iomem *regs;
|
|
int irq;
|
|
int len;
|
|
int count;
|
|
|
|
void (*set_cs)(struct s3c2410_spi_info *spi,
|
|
int cs, int pol);
|
|
|
|
/* data buffers */
|
|
const unsigned char *tx;
|
|
unsigned char *rx;
|
|
|
|
struct clk *clk;
|
|
struct resource *ioarea;
|
|
struct spi_master *master;
|
|
struct spi_device *curdev;
|
|
struct device *dev;
|
|
struct s3c2410_spi_info *pdata;
|
|
};
|
|
|
|
#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
|
|
#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
|
|
|
|
static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
|
|
{
|
|
return spi_master_get_devdata(sdev->master);
|
|
}
|
|
|
|
static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
|
|
{
|
|
gpio_set_value(spi->pin_cs, pol);
|
|
}
|
|
|
|
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
|
|
{
|
|
struct s3c24xx_spi *hw = to_hw(spi);
|
|
unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
|
|
unsigned int spcon;
|
|
|
|
switch (value) {
|
|
case BITBANG_CS_INACTIVE:
|
|
hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
|
|
break;
|
|
|
|
case BITBANG_CS_ACTIVE:
|
|
spcon = readb(hw->regs + S3C2410_SPCON);
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
spcon |= S3C2410_SPCON_CPHA_FMTB;
|
|
else
|
|
spcon &= ~S3C2410_SPCON_CPHA_FMTB;
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
spcon |= S3C2410_SPCON_CPOL_HIGH;
|
|
else
|
|
spcon &= ~S3C2410_SPCON_CPOL_HIGH;
|
|
|
|
spcon |= S3C2410_SPCON_ENSCK;
|
|
|
|
/* write new configration */
|
|
|
|
writeb(spcon, hw->regs + S3C2410_SPCON);
|
|
hw->set_cs(hw->pdata, spi->chip_select, cspol);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int s3c24xx_spi_setupxfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct s3c24xx_spi *hw = to_hw(spi);
|
|
unsigned int bpw;
|
|
unsigned int hz;
|
|
unsigned int div;
|
|
|
|
bpw = t ? t->bits_per_word : spi->bits_per_word;
|
|
hz = t ? t->speed_hz : spi->max_speed_hz;
|
|
|
|
if (bpw != 8) {
|
|
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
|
|
return -EINVAL;
|
|
}
|
|
|
|
div = clk_get_rate(hw->clk) / hz;
|
|
|
|
/* is clk = pclk / (2 * (pre+1)), or is it
|
|
* clk = (pclk * 2) / ( pre + 1) */
|
|
|
|
div /= 2;
|
|
|
|
if (div > 0)
|
|
div -= 1;
|
|
|
|
if (div > 255)
|
|
div = 255;
|
|
|
|
dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
|
|
writeb(div, hw->regs + S3C2410_SPPRE);
|
|
|
|
spin_lock(&hw->bitbang.lock);
|
|
if (!hw->bitbang.busy) {
|
|
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
|
|
/* need to ndelay for 0.5 clocktick ? */
|
|
}
|
|
spin_unlock(&hw->bitbang.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c24xx_spi_setup(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
ret = s3c24xx_spi_setupxfer(spi, NULL);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "setupxfer returned %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
|
|
{
|
|
return hw->tx ? hw->tx[count] : 0;
|
|
}
|
|
|
|
static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct s3c24xx_spi *hw = to_hw(spi);
|
|
|
|
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
|
|
t->tx_buf, t->rx_buf, t->len);
|
|
|
|
hw->tx = t->tx_buf;
|
|
hw->rx = t->rx_buf;
|
|
hw->len = t->len;
|
|
hw->count = 0;
|
|
|
|
init_completion(&hw->done);
|
|
|
|
/* send the first byte */
|
|
writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
|
|
|
|
wait_for_completion(&hw->done);
|
|
|
|
return hw->count;
|
|
}
|
|
|
|
static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
|
|
{
|
|
struct s3c24xx_spi *hw = dev;
|
|
unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
|
|
unsigned int count = hw->count;
|
|
|
|
if (spsta & S3C2410_SPSTA_DCOL) {
|
|
dev_dbg(hw->dev, "data-collision\n");
|
|
complete(&hw->done);
|
|
goto irq_done;
|
|
}
|
|
|
|
if (!(spsta & S3C2410_SPSTA_READY)) {
|
|
dev_dbg(hw->dev, "spi not ready for tx?\n");
|
|
complete(&hw->done);
|
|
goto irq_done;
|
|
}
|
|
|
|
hw->count++;
|
|
|
|
if (hw->rx)
|
|
hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
|
|
|
|
count++;
|
|
|
|
if (count < hw->len)
|
|
writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
|
|
else
|
|
complete(&hw->done);
|
|
|
|
irq_done:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
|
|
{
|
|
/* for the moment, permanently enable the clock */
|
|
|
|
clk_enable(hw->clk);
|
|
|
|
/* program defaults into the registers */
|
|
|
|
writeb(0xff, hw->regs + S3C2410_SPPRE);
|
|
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
|
|
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
|
|
|
|
if (hw->pdata) {
|
|
if (hw->set_cs == s3c24xx_spi_gpiocs)
|
|
gpio_direction_output(hw->pdata->pin_cs, 1);
|
|
|
|
if (hw->pdata->gpio_setup)
|
|
hw->pdata->gpio_setup(hw->pdata, 1);
|
|
}
|
|
}
|
|
|
|
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct s3c2410_spi_info *pdata;
|
|
struct s3c24xx_spi *hw;
|
|
struct spi_master *master;
|
|
struct resource *res;
|
|
int err = 0;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
|
|
if (master == NULL) {
|
|
dev_err(&pdev->dev, "No memory for spi_master\n");
|
|
err = -ENOMEM;
|
|
goto err_nomem;
|
|
}
|
|
|
|
hw = spi_master_get_devdata(master);
|
|
memset(hw, 0, sizeof(struct s3c24xx_spi));
|
|
|
|
hw->master = spi_master_get(master);
|
|
hw->pdata = pdata = pdev->dev.platform_data;
|
|
hw->dev = &pdev->dev;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&pdev->dev, "No platform data supplied\n");
|
|
err = -ENOENT;
|
|
goto err_no_pdata;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, hw);
|
|
init_completion(&hw->done);
|
|
|
|
/* setup the master state. */
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
|
|
|
|
master->num_chipselect = hw->pdata->num_cs;
|
|
master->bus_num = pdata->bus_num;
|
|
|
|
/* setup the state for the bitbang driver */
|
|
|
|
hw->bitbang.master = hw->master;
|
|
hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
|
|
hw->bitbang.chipselect = s3c24xx_spi_chipsel;
|
|
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
|
|
hw->bitbang.master->setup = s3c24xx_spi_setup;
|
|
|
|
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
|
|
|
|
/* find and map our resources */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
|
|
err = -ENOENT;
|
|
goto err_no_iores;
|
|
}
|
|
|
|
hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
|
|
pdev->name);
|
|
|
|
if (hw->ioarea == NULL) {
|
|
dev_err(&pdev->dev, "Cannot reserve region\n");
|
|
err = -ENXIO;
|
|
goto err_no_iores;
|
|
}
|
|
|
|
hw->regs = ioremap(res->start, (res->end - res->start)+1);
|
|
if (hw->regs == NULL) {
|
|
dev_err(&pdev->dev, "Cannot map IO\n");
|
|
err = -ENXIO;
|
|
goto err_no_iomap;
|
|
}
|
|
|
|
hw->irq = platform_get_irq(pdev, 0);
|
|
if (hw->irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ specified\n");
|
|
err = -ENOENT;
|
|
goto err_no_irq;
|
|
}
|
|
|
|
err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Cannot claim IRQ\n");
|
|
goto err_no_irq;
|
|
}
|
|
|
|
hw->clk = clk_get(&pdev->dev, "spi");
|
|
if (IS_ERR(hw->clk)) {
|
|
dev_err(&pdev->dev, "No clock for device\n");
|
|
err = PTR_ERR(hw->clk);
|
|
goto err_no_clk;
|
|
}
|
|
|
|
/* setup any gpio we can */
|
|
|
|
if (!pdata->set_cs) {
|
|
if (pdata->pin_cs < 0) {
|
|
dev_err(&pdev->dev, "No chipselect pin\n");
|
|
goto err_register;
|
|
}
|
|
|
|
err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to get gpio for cs\n");
|
|
goto err_register;
|
|
}
|
|
|
|
hw->set_cs = s3c24xx_spi_gpiocs;
|
|
gpio_direction_output(pdata->pin_cs, 1);
|
|
} else
|
|
hw->set_cs = pdata->set_cs;
|
|
|
|
s3c24xx_spi_initialsetup(hw);
|
|
|
|
/* register our spi controller */
|
|
|
|
err = spi_bitbang_start(&hw->bitbang);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to register SPI master\n");
|
|
goto err_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_register:
|
|
if (hw->set_cs == s3c24xx_spi_gpiocs)
|
|
gpio_free(pdata->pin_cs);
|
|
|
|
clk_disable(hw->clk);
|
|
clk_put(hw->clk);
|
|
|
|
err_no_clk:
|
|
free_irq(hw->irq, hw);
|
|
|
|
err_no_irq:
|
|
iounmap(hw->regs);
|
|
|
|
err_no_iomap:
|
|
release_resource(hw->ioarea);
|
|
kfree(hw->ioarea);
|
|
|
|
err_no_iores:
|
|
err_no_pdata:
|
|
spi_master_put(hw->master);;
|
|
|
|
err_nomem:
|
|
return err;
|
|
}
|
|
|
|
static int __exit s3c24xx_spi_remove(struct platform_device *dev)
|
|
{
|
|
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
|
|
spi_unregister_master(hw->master);
|
|
|
|
clk_disable(hw->clk);
|
|
clk_put(hw->clk);
|
|
|
|
free_irq(hw->irq, hw);
|
|
iounmap(hw->regs);
|
|
|
|
if (hw->set_cs == s3c24xx_spi_gpiocs)
|
|
gpio_free(hw->pdata->pin_cs);
|
|
|
|
release_resource(hw->ioarea);
|
|
kfree(hw->ioarea);
|
|
|
|
spi_master_put(hw->master);
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
|
|
{
|
|
struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
|
|
|
|
if (hw->pdata && hw->pdata->gpio_setup)
|
|
hw->pdata->gpio_setup(hw->pdata, 0);
|
|
|
|
clk_disable(hw->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int s3c24xx_spi_resume(struct platform_device *pdev)
|
|
{
|
|
struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
|
|
|
|
s3c24xx_spi_initialsetup(hw);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define s3c24xx_spi_suspend NULL
|
|
#define s3c24xx_spi_resume NULL
|
|
#endif
|
|
|
|
MODULE_ALIAS("platform:s3c2410-spi");
|
|
static struct platform_driver s3c24xx_spi_driver = {
|
|
.remove = __exit_p(s3c24xx_spi_remove),
|
|
.suspend = s3c24xx_spi_suspend,
|
|
.resume = s3c24xx_spi_resume,
|
|
.driver = {
|
|
.name = "s3c2410-spi",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init s3c24xx_spi_init(void)
|
|
{
|
|
return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
|
|
}
|
|
|
|
static void __exit s3c24xx_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&s3c24xx_spi_driver);
|
|
}
|
|
|
|
module_init(s3c24xx_spi_init);
|
|
module_exit(s3c24xx_spi_exit);
|
|
|
|
MODULE_DESCRIPTION("S3C24XX SPI Driver");
|
|
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL");
|