301fd748e2
Maneesh Soni was getting a crash when running the wakeup tracer. We debugged it down to the recording of the function with the CALLER_ADDR2 macro. This is used to get the location of the caller to schedule. But the problem comes when schedule is called by assmebly. In the case that Maneesh had, retint_careful would call schedule. But retint_careful does not set up a proper frame pointer. CALLER_ADDR2 is defined as __builtin_return_address(2). This produces the following assembly in the wakeup tracer code. mov 0x0(%rbp),%rcx <--- get the frame pointer of the caller mov %r14d,%r8d mov 0xf2de8e(%rip),%rdi mov 0x8(%rcx),%rsi <-- this is __builtin_return_address(1) mov 0x28(%rdi,%rax,8),%rbx mov (%rcx),%rax <-- get the frame pointer of the caller's caller mov %r12,%rcx mov 0x8(%rax),%rdx <-- this is __builtin_return_address(2) At the reading of 0x8(%rax) Maneesh's machine would take a fault. The reason is that retint_careful did not set up the return address and the content of %rax here was zero. To verify this, I sent Maneesh a patch to create a frame pointer in retint_careful. He ran the test again but this time he would take the same type of fault from sysret_careful. The retint_careful was no longer an issue, but there are other callers that still have issues. Instead of adding frame pointers for all callers to schedule (in possibly all archs), it is much safer to simply not use CALLER_ADDR2. This loses out on knowing what called schedule, but the function tracer will help there if needed. Reported-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
419 lines
8.9 KiB
C
419 lines
8.9 KiB
C
/*
|
|
* trace task wakeup timings
|
|
*
|
|
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
|
|
* Copyright (C) 2008 Ingo Molnar <mingo@redhat.com>
|
|
*
|
|
* Based on code from the latency_tracer, that is:
|
|
*
|
|
* Copyright (C) 2004-2006 Ingo Molnar
|
|
* Copyright (C) 2004 William Lee Irwin III
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/kallsyms.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/ftrace.h>
|
|
#include <trace/sched.h>
|
|
|
|
#include "trace.h"
|
|
|
|
static struct trace_array *wakeup_trace;
|
|
static int __read_mostly tracer_enabled;
|
|
|
|
static struct task_struct *wakeup_task;
|
|
static int wakeup_cpu;
|
|
static unsigned wakeup_prio = -1;
|
|
static int wakeup_rt;
|
|
|
|
static raw_spinlock_t wakeup_lock =
|
|
(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
|
|
|
|
static void __wakeup_reset(struct trace_array *tr);
|
|
|
|
static int save_lat_flag;
|
|
|
|
#ifdef CONFIG_FUNCTION_TRACER
|
|
/*
|
|
* irqsoff uses its own tracer function to keep the overhead down:
|
|
*/
|
|
static void
|
|
wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
|
|
{
|
|
struct trace_array *tr = wakeup_trace;
|
|
struct trace_array_cpu *data;
|
|
unsigned long flags;
|
|
long disabled;
|
|
int resched;
|
|
int cpu;
|
|
int pc;
|
|
|
|
if (likely(!wakeup_task))
|
|
return;
|
|
|
|
pc = preempt_count();
|
|
resched = ftrace_preempt_disable();
|
|
|
|
cpu = raw_smp_processor_id();
|
|
data = tr->data[cpu];
|
|
disabled = atomic_inc_return(&data->disabled);
|
|
if (unlikely(disabled != 1))
|
|
goto out;
|
|
|
|
local_irq_save(flags);
|
|
__raw_spin_lock(&wakeup_lock);
|
|
|
|
if (unlikely(!wakeup_task))
|
|
goto unlock;
|
|
|
|
/*
|
|
* The task can't disappear because it needs to
|
|
* wake up first, and we have the wakeup_lock.
|
|
*/
|
|
if (task_cpu(wakeup_task) != cpu)
|
|
goto unlock;
|
|
|
|
trace_function(tr, ip, parent_ip, flags, pc);
|
|
|
|
unlock:
|
|
__raw_spin_unlock(&wakeup_lock);
|
|
local_irq_restore(flags);
|
|
|
|
out:
|
|
atomic_dec(&data->disabled);
|
|
|
|
ftrace_preempt_enable(resched);
|
|
}
|
|
|
|
static struct ftrace_ops trace_ops __read_mostly =
|
|
{
|
|
.func = wakeup_tracer_call,
|
|
};
|
|
#endif /* CONFIG_FUNCTION_TRACER */
|
|
|
|
/*
|
|
* Should this new latency be reported/recorded?
|
|
*/
|
|
static int report_latency(cycle_t delta)
|
|
{
|
|
if (tracing_thresh) {
|
|
if (delta < tracing_thresh)
|
|
return 0;
|
|
} else {
|
|
if (delta <= tracing_max_latency)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void notrace
|
|
probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
|
|
struct task_struct *next)
|
|
{
|
|
unsigned long latency = 0, t0 = 0, t1 = 0;
|
|
struct trace_array_cpu *data;
|
|
cycle_t T0, T1, delta;
|
|
unsigned long flags;
|
|
long disabled;
|
|
int cpu;
|
|
int pc;
|
|
|
|
tracing_record_cmdline(prev);
|
|
|
|
if (unlikely(!tracer_enabled))
|
|
return;
|
|
|
|
/*
|
|
* When we start a new trace, we set wakeup_task to NULL
|
|
* and then set tracer_enabled = 1. We want to make sure
|
|
* that another CPU does not see the tracer_enabled = 1
|
|
* and the wakeup_task with an older task, that might
|
|
* actually be the same as next.
|
|
*/
|
|
smp_rmb();
|
|
|
|
if (next != wakeup_task)
|
|
return;
|
|
|
|
pc = preempt_count();
|
|
|
|
/* The task we are waiting for is waking up */
|
|
data = wakeup_trace->data[wakeup_cpu];
|
|
|
|
/* disable local data, not wakeup_cpu data */
|
|
cpu = raw_smp_processor_id();
|
|
disabled = atomic_inc_return(&wakeup_trace->data[cpu]->disabled);
|
|
if (likely(disabled != 1))
|
|
goto out;
|
|
|
|
local_irq_save(flags);
|
|
__raw_spin_lock(&wakeup_lock);
|
|
|
|
/* We could race with grabbing wakeup_lock */
|
|
if (unlikely(!tracer_enabled || next != wakeup_task))
|
|
goto out_unlock;
|
|
|
|
trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc);
|
|
tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc);
|
|
|
|
/*
|
|
* usecs conversion is slow so we try to delay the conversion
|
|
* as long as possible:
|
|
*/
|
|
T0 = data->preempt_timestamp;
|
|
T1 = ftrace_now(cpu);
|
|
delta = T1-T0;
|
|
|
|
if (!report_latency(delta))
|
|
goto out_unlock;
|
|
|
|
latency = nsecs_to_usecs(delta);
|
|
|
|
tracing_max_latency = delta;
|
|
t0 = nsecs_to_usecs(T0);
|
|
t1 = nsecs_to_usecs(T1);
|
|
|
|
update_max_tr(wakeup_trace, wakeup_task, wakeup_cpu);
|
|
|
|
out_unlock:
|
|
__wakeup_reset(wakeup_trace);
|
|
__raw_spin_unlock(&wakeup_lock);
|
|
local_irq_restore(flags);
|
|
out:
|
|
atomic_dec(&wakeup_trace->data[cpu]->disabled);
|
|
}
|
|
|
|
static void __wakeup_reset(struct trace_array *tr)
|
|
{
|
|
int cpu;
|
|
|
|
for_each_possible_cpu(cpu)
|
|
tracing_reset(tr, cpu);
|
|
|
|
wakeup_cpu = -1;
|
|
wakeup_prio = -1;
|
|
|
|
if (wakeup_task)
|
|
put_task_struct(wakeup_task);
|
|
|
|
wakeup_task = NULL;
|
|
}
|
|
|
|
static void wakeup_reset(struct trace_array *tr)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
__raw_spin_lock(&wakeup_lock);
|
|
__wakeup_reset(tr);
|
|
__raw_spin_unlock(&wakeup_lock);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void
|
|
probe_wakeup(struct rq *rq, struct task_struct *p, int success)
|
|
{
|
|
struct trace_array_cpu *data;
|
|
int cpu = smp_processor_id();
|
|
unsigned long flags;
|
|
long disabled;
|
|
int pc;
|
|
|
|
if (likely(!tracer_enabled))
|
|
return;
|
|
|
|
tracing_record_cmdline(p);
|
|
tracing_record_cmdline(current);
|
|
|
|
if ((wakeup_rt && !rt_task(p)) ||
|
|
p->prio >= wakeup_prio ||
|
|
p->prio >= current->prio)
|
|
return;
|
|
|
|
pc = preempt_count();
|
|
disabled = atomic_inc_return(&wakeup_trace->data[cpu]->disabled);
|
|
if (unlikely(disabled != 1))
|
|
goto out;
|
|
|
|
/* interrupts should be off from try_to_wake_up */
|
|
__raw_spin_lock(&wakeup_lock);
|
|
|
|
/* check for races. */
|
|
if (!tracer_enabled || p->prio >= wakeup_prio)
|
|
goto out_locked;
|
|
|
|
/* reset the trace */
|
|
__wakeup_reset(wakeup_trace);
|
|
|
|
wakeup_cpu = task_cpu(p);
|
|
wakeup_prio = p->prio;
|
|
|
|
wakeup_task = p;
|
|
get_task_struct(wakeup_task);
|
|
|
|
local_save_flags(flags);
|
|
|
|
data = wakeup_trace->data[wakeup_cpu];
|
|
data->preempt_timestamp = ftrace_now(cpu);
|
|
tracing_sched_wakeup_trace(wakeup_trace, p, current, flags, pc);
|
|
|
|
/*
|
|
* We must be careful in using CALLER_ADDR2. But since wake_up
|
|
* is not called by an assembly function (where as schedule is)
|
|
* it should be safe to use it here.
|
|
*/
|
|
trace_function(wakeup_trace, CALLER_ADDR1, CALLER_ADDR2, flags, pc);
|
|
|
|
out_locked:
|
|
__raw_spin_unlock(&wakeup_lock);
|
|
out:
|
|
atomic_dec(&wakeup_trace->data[cpu]->disabled);
|
|
}
|
|
|
|
static void start_wakeup_tracer(struct trace_array *tr)
|
|
{
|
|
int ret;
|
|
|
|
ret = register_trace_sched_wakeup(probe_wakeup);
|
|
if (ret) {
|
|
pr_info("wakeup trace: Couldn't activate tracepoint"
|
|
" probe to kernel_sched_wakeup\n");
|
|
return;
|
|
}
|
|
|
|
ret = register_trace_sched_wakeup_new(probe_wakeup);
|
|
if (ret) {
|
|
pr_info("wakeup trace: Couldn't activate tracepoint"
|
|
" probe to kernel_sched_wakeup_new\n");
|
|
goto fail_deprobe;
|
|
}
|
|
|
|
ret = register_trace_sched_switch(probe_wakeup_sched_switch);
|
|
if (ret) {
|
|
pr_info("sched trace: Couldn't activate tracepoint"
|
|
" probe to kernel_sched_switch\n");
|
|
goto fail_deprobe_wake_new;
|
|
}
|
|
|
|
wakeup_reset(tr);
|
|
|
|
/*
|
|
* Don't let the tracer_enabled = 1 show up before
|
|
* the wakeup_task is reset. This may be overkill since
|
|
* wakeup_reset does a spin_unlock after setting the
|
|
* wakeup_task to NULL, but I want to be safe.
|
|
* This is a slow path anyway.
|
|
*/
|
|
smp_wmb();
|
|
|
|
register_ftrace_function(&trace_ops);
|
|
|
|
if (tracing_is_enabled())
|
|
tracer_enabled = 1;
|
|
else
|
|
tracer_enabled = 0;
|
|
|
|
return;
|
|
fail_deprobe_wake_new:
|
|
unregister_trace_sched_wakeup_new(probe_wakeup);
|
|
fail_deprobe:
|
|
unregister_trace_sched_wakeup(probe_wakeup);
|
|
}
|
|
|
|
static void stop_wakeup_tracer(struct trace_array *tr)
|
|
{
|
|
tracer_enabled = 0;
|
|
unregister_ftrace_function(&trace_ops);
|
|
unregister_trace_sched_switch(probe_wakeup_sched_switch);
|
|
unregister_trace_sched_wakeup_new(probe_wakeup);
|
|
unregister_trace_sched_wakeup(probe_wakeup);
|
|
}
|
|
|
|
static int __wakeup_tracer_init(struct trace_array *tr)
|
|
{
|
|
save_lat_flag = trace_flags & TRACE_ITER_LATENCY_FMT;
|
|
trace_flags |= TRACE_ITER_LATENCY_FMT;
|
|
|
|
tracing_max_latency = 0;
|
|
wakeup_trace = tr;
|
|
start_wakeup_tracer(tr);
|
|
return 0;
|
|
}
|
|
|
|
static int wakeup_tracer_init(struct trace_array *tr)
|
|
{
|
|
wakeup_rt = 0;
|
|
return __wakeup_tracer_init(tr);
|
|
}
|
|
|
|
static int wakeup_rt_tracer_init(struct trace_array *tr)
|
|
{
|
|
wakeup_rt = 1;
|
|
return __wakeup_tracer_init(tr);
|
|
}
|
|
|
|
static void wakeup_tracer_reset(struct trace_array *tr)
|
|
{
|
|
stop_wakeup_tracer(tr);
|
|
/* make sure we put back any tasks we are tracing */
|
|
wakeup_reset(tr);
|
|
|
|
if (!save_lat_flag)
|
|
trace_flags &= ~TRACE_ITER_LATENCY_FMT;
|
|
}
|
|
|
|
static void wakeup_tracer_start(struct trace_array *tr)
|
|
{
|
|
wakeup_reset(tr);
|
|
tracer_enabled = 1;
|
|
}
|
|
|
|
static void wakeup_tracer_stop(struct trace_array *tr)
|
|
{
|
|
tracer_enabled = 0;
|
|
}
|
|
|
|
static struct tracer wakeup_tracer __read_mostly =
|
|
{
|
|
.name = "wakeup",
|
|
.init = wakeup_tracer_init,
|
|
.reset = wakeup_tracer_reset,
|
|
.start = wakeup_tracer_start,
|
|
.stop = wakeup_tracer_stop,
|
|
.print_max = 1,
|
|
#ifdef CONFIG_FTRACE_SELFTEST
|
|
.selftest = trace_selftest_startup_wakeup,
|
|
#endif
|
|
};
|
|
|
|
static struct tracer wakeup_rt_tracer __read_mostly =
|
|
{
|
|
.name = "wakeup_rt",
|
|
.init = wakeup_rt_tracer_init,
|
|
.reset = wakeup_tracer_reset,
|
|
.start = wakeup_tracer_start,
|
|
.stop = wakeup_tracer_stop,
|
|
.wait_pipe = poll_wait_pipe,
|
|
.print_max = 1,
|
|
#ifdef CONFIG_FTRACE_SELFTEST
|
|
.selftest = trace_selftest_startup_wakeup,
|
|
#endif
|
|
};
|
|
|
|
__init static int init_wakeup_tracer(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = register_tracer(&wakeup_tracer);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = register_tracer(&wakeup_rt_tracer);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(init_wakeup_tracer);
|