linux/drivers/leds/leds-bd2802.c

795 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* leds-bd2802.c - RGB LED Driver
*
* Copyright (C) 2009 Samsung Electronics
* Kim Kyuwon <q1.kim@samsung.com>
*
* Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/leds-bd2802.h>
#include <linux/slab.h>
#include <linux/pm.h>
#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
#define BD2802_LED_OFFSET 0xa
#define BD2802_COLOR_OFFSET 0x3
#define BD2802_REG_CLKSETUP 0x00
#define BD2802_REG_CONTROL 0x01
#define BD2802_REG_HOURSETUP 0x02
#define BD2802_REG_CURRENT1SETUP 0x03
#define BD2802_REG_CURRENT2SETUP 0x04
#define BD2802_REG_WAVEPATTERN 0x05
#define BD2802_CURRENT_032 0x10 /* 3.2mA */
#define BD2802_CURRENT_000 0x00 /* 0.0mA */
#define BD2802_PATTERN_FULL 0x07
#define BD2802_PATTERN_HALF 0x03
enum led_ids {
LED1,
LED2,
LED_NUM,
};
enum led_colors {
RED,
GREEN,
BLUE,
};
enum led_bits {
BD2802_OFF,
BD2802_BLINK,
BD2802_ON,
};
/*
* State '0' : 'off'
* State '1' : 'blink'
* State '2' : 'on'.
*/
struct led_state {
unsigned r:2;
unsigned g:2;
unsigned b:2;
};
struct bd2802_led {
struct bd2802_led_platform_data *pdata;
struct i2c_client *client;
struct rw_semaphore rwsem;
struct led_state led[2];
/*
* Making led_classdev as array is not recommended, because array
* members prevent using 'container_of' macro. So repetitive works
* are needed.
*/
struct led_classdev cdev_led1r;
struct led_classdev cdev_led1g;
struct led_classdev cdev_led1b;
struct led_classdev cdev_led2r;
struct led_classdev cdev_led2g;
struct led_classdev cdev_led2b;
/*
* Advanced Configuration Function(ADF) mode:
* In ADF mode, user can set registers of BD2802GU directly,
* therefore BD2802GU doesn't enter reset state.
*/
int adf_on;
enum led_ids led_id;
enum led_colors color;
enum led_bits state;
/* General attributes of RGB LEDs */
int wave_pattern;
int rgb_current;
};
/*--------------------------------------------------------------*/
/* BD2802GU helper functions */
/*--------------------------------------------------------------*/
static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id,
enum led_colors color)
{
switch (color) {
case RED:
return !led->led[id].r;
case GREEN:
return !led->led[id].g;
case BLUE:
return !led->led[id].b;
default:
dev_err(&led->client->dev, "%s: Invalid color\n", __func__);
return -EINVAL;
}
}
static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id)
{
if (led->led[id].r || led->led[id].g || led->led[id].b)
return 0;
return 1;
}
static inline int bd2802_is_all_off(struct bd2802_led *led)
{
int i;
for (i = 0; i < LED_NUM; i++)
if (!bd2802_is_led_off(led, i))
return 0;
return 1;
}
static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color)
{
return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET;
}
static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color,
u8 reg_offset)
{
return reg_offset + bd2802_get_base_offset(id, color);
}
/*--------------------------------------------------------------*/
/* BD2802GU core functions */
/*--------------------------------------------------------------*/
static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val)
{
int ret = i2c_smbus_write_byte_data(client, reg, val);
if (ret >= 0)
return 0;
dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
__func__, reg, val, ret);
return ret;
}
static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
enum led_colors color, enum led_bits led_bit)
{
int i;
u8 value;
for (i = 0; i < LED_NUM; i++) {
if (i == id) {
switch (color) {
case RED:
led->led[i].r = led_bit;
break;
case GREEN:
led->led[i].g = led_bit;
break;
case BLUE:
led->led[i].b = led_bit;
break;
default:
dev_err(&led->client->dev,
"%s: Invalid color\n", __func__);
return;
}
}
}
if (led_bit == BD2802_BLINK || led_bit == BD2802_ON)
return;
if (!bd2802_is_led_off(led, id))
return;
if (bd2802_is_all_off(led) && !led->adf_on) {
gpio_set_value(led->pdata->reset_gpio, 0);
return;
}
/*
* In this case, other led is turned on, and current led is turned
* off. So set RGB LED Control register to stop the current RGB LED
*/
value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1);
bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
}
static void bd2802_configure(struct bd2802_led *led)
{
struct bd2802_led_platform_data *pdata = led->pdata;
u8 reg;
reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP);
bd2802_write_byte(led->client, reg, pdata->rgb_time);
reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP);
bd2802_write_byte(led->client, reg, pdata->rgb_time);
}
static void bd2802_reset_cancel(struct bd2802_led *led)
{
gpio_set_value(led->pdata->reset_gpio, 1);
udelay(100);
bd2802_configure(led);
}
static void bd2802_enable(struct bd2802_led *led, enum led_ids id)
{
enum led_ids other_led = (id == LED1) ? LED2 : LED1;
u8 value, other_led_on;
other_led_on = !bd2802_is_led_off(led, other_led);
if (id == LED1)
value = LED_CTL(other_led_on, 1);
else
value = LED_CTL(1 , other_led_on);
bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
}
static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
enum led_colors color)
{
u8 reg;
if (bd2802_is_all_off(led) && !led->adf_on)
bd2802_reset_cancel(led);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL);
bd2802_enable(led, id);
bd2802_update_state(led, id, color, BD2802_ON);
}
static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
enum led_colors color)
{
u8 reg;
if (bd2802_is_all_off(led) && !led->adf_on)
bd2802_reset_cancel(led);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
bd2802_write_byte(led->client, reg, led->wave_pattern);
bd2802_enable(led, id);
bd2802_update_state(led, id, color, BD2802_BLINK);
}
static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id,
enum led_colors color, enum led_bits led_bit)
{
if (led_bit == BD2802_OFF) {
dev_err(&led->client->dev,
"Only 'blink' and 'on' are allowed\n");
return;
}
if (led_bit == BD2802_BLINK)
bd2802_set_blink(led, id, color);
else
bd2802_set_on(led, id, color);
}
static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id,
enum led_colors color)
{
u8 reg;
if (bd2802_is_rgb_off(led, id, color))
return;
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
bd2802_update_state(led, id, color, BD2802_OFF);
}
#define BD2802_SET_REGISTER(reg_addr, reg_name) \
static ssize_t bd2802_store_reg##reg_addr(struct device *dev, \
struct device_attribute *attr, const char *buf, size_t count) \
{ \
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
unsigned long val; \
int ret; \
if (!count) \
return -EINVAL; \
ret = kstrtoul(buf, 16, &val); \
if (ret) \
return ret; \
down_write(&led->rwsem); \
bd2802_write_byte(led->client, reg_addr, (u8) val); \
up_write(&led->rwsem); \
return count; \
} \
static struct device_attribute bd2802_reg##reg_addr##_attr = { \
.attr = {.name = reg_name, .mode = 0644}, \
.store = bd2802_store_reg##reg_addr, \
};
BD2802_SET_REGISTER(0x00, "0x00");
BD2802_SET_REGISTER(0x01, "0x01");
BD2802_SET_REGISTER(0x02, "0x02");
BD2802_SET_REGISTER(0x03, "0x03");
BD2802_SET_REGISTER(0x04, "0x04");
BD2802_SET_REGISTER(0x05, "0x05");
BD2802_SET_REGISTER(0x06, "0x06");
BD2802_SET_REGISTER(0x07, "0x07");
BD2802_SET_REGISTER(0x08, "0x08");
BD2802_SET_REGISTER(0x09, "0x09");
BD2802_SET_REGISTER(0x0a, "0x0a");
BD2802_SET_REGISTER(0x0b, "0x0b");
BD2802_SET_REGISTER(0x0c, "0x0c");
BD2802_SET_REGISTER(0x0d, "0x0d");
BD2802_SET_REGISTER(0x0e, "0x0e");
BD2802_SET_REGISTER(0x0f, "0x0f");
BD2802_SET_REGISTER(0x10, "0x10");
BD2802_SET_REGISTER(0x11, "0x11");
BD2802_SET_REGISTER(0x12, "0x12");
BD2802_SET_REGISTER(0x13, "0x13");
BD2802_SET_REGISTER(0x14, "0x14");
BD2802_SET_REGISTER(0x15, "0x15");
static struct device_attribute *bd2802_addr_attributes[] = {
&bd2802_reg0x00_attr,
&bd2802_reg0x01_attr,
&bd2802_reg0x02_attr,
&bd2802_reg0x03_attr,
&bd2802_reg0x04_attr,
&bd2802_reg0x05_attr,
&bd2802_reg0x06_attr,
&bd2802_reg0x07_attr,
&bd2802_reg0x08_attr,
&bd2802_reg0x09_attr,
&bd2802_reg0x0a_attr,
&bd2802_reg0x0b_attr,
&bd2802_reg0x0c_attr,
&bd2802_reg0x0d_attr,
&bd2802_reg0x0e_attr,
&bd2802_reg0x0f_attr,
&bd2802_reg0x10_attr,
&bd2802_reg0x11_attr,
&bd2802_reg0x12_attr,
&bd2802_reg0x13_attr,
&bd2802_reg0x14_attr,
&bd2802_reg0x15_attr,
};
static void bd2802_enable_adv_conf(struct bd2802_led *led)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) {
ret = device_create_file(&led->client->dev,
bd2802_addr_attributes[i]);
if (ret) {
dev_err(&led->client->dev, "failed: sysfs file %s\n",
bd2802_addr_attributes[i]->attr.name);
goto failed_remove_files;
}
}
if (bd2802_is_all_off(led))
bd2802_reset_cancel(led);
led->adf_on = 1;
return;
failed_remove_files:
for (i--; i >= 0; i--)
device_remove_file(&led->client->dev,
bd2802_addr_attributes[i]);
}
static void bd2802_disable_adv_conf(struct bd2802_led *led)
{
int i;
for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++)
device_remove_file(&led->client->dev,
bd2802_addr_attributes[i]);
if (bd2802_is_all_off(led))
gpio_set_value(led->pdata->reset_gpio, 0);
led->adf_on = 0;
}
static ssize_t bd2802_show_adv_conf(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
ssize_t ret;
down_read(&led->rwsem);
if (led->adf_on)
ret = sprintf(buf, "on\n");
else
ret = sprintf(buf, "off\n");
up_read(&led->rwsem);
return ret;
}
static ssize_t bd2802_store_adv_conf(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
if (!count)
return -EINVAL;
down_write(&led->rwsem);
if (!led->adf_on && !strncmp(buf, "on", 2))
bd2802_enable_adv_conf(led);
else if (led->adf_on && !strncmp(buf, "off", 3))
bd2802_disable_adv_conf(led);
up_write(&led->rwsem);
return count;
}
static struct device_attribute bd2802_adv_conf_attr = {
.attr = {
.name = "advanced_configuration",
.mode = 0644,
},
.show = bd2802_show_adv_conf,
.store = bd2802_store_adv_conf,
};
#define BD2802_CONTROL_ATTR(attr_name, name_str) \
static ssize_t bd2802_show_##attr_name(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
ssize_t ret; \
down_read(&led->rwsem); \
ret = sprintf(buf, "0x%02x\n", led->attr_name); \
up_read(&led->rwsem); \
return ret; \
} \
static ssize_t bd2802_store_##attr_name(struct device *dev, \
struct device_attribute *attr, const char *buf, size_t count) \
{ \
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
unsigned long val; \
int ret; \
if (!count) \
return -EINVAL; \
ret = kstrtoul(buf, 16, &val); \
if (ret) \
return ret; \
down_write(&led->rwsem); \
led->attr_name = val; \
up_write(&led->rwsem); \
return count; \
} \
static struct device_attribute bd2802_##attr_name##_attr = { \
.attr = { \
.name = name_str, \
.mode = 0644, \
}, \
.show = bd2802_show_##attr_name, \
.store = bd2802_store_##attr_name, \
};
BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
static struct device_attribute *bd2802_attributes[] = {
&bd2802_adv_conf_attr,
&bd2802_wave_pattern_attr,
&bd2802_rgb_current_attr,
};
#define BD2802_CONTROL_RGBS(name, id, clr) \
static int bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\
enum led_brightness value) \
{ \
struct bd2802_led *led = \
container_of(led_cdev, struct bd2802_led, cdev_##name); \
led->led_id = id; \
led->color = clr; \
if (value == LED_OFF) { \
led->state = BD2802_OFF; \
bd2802_turn_off(led, led->led_id, led->color); \
} else { \
led->state = BD2802_ON; \
bd2802_turn_on(led, led->led_id, led->color, BD2802_ON);\
} \
return 0; \
} \
static int bd2802_set_##name##_blink(struct led_classdev *led_cdev, \
unsigned long *delay_on, unsigned long *delay_off) \
{ \
struct bd2802_led *led = \
container_of(led_cdev, struct bd2802_led, cdev_##name); \
if (*delay_on == 0 || *delay_off == 0) \
return -EINVAL; \
led->led_id = id; \
led->color = clr; \
led->state = BD2802_BLINK; \
bd2802_turn_on(led, led->led_id, led->color, BD2802_BLINK); \
return 0; \
}
BD2802_CONTROL_RGBS(led1r, LED1, RED);
BD2802_CONTROL_RGBS(led1g, LED1, GREEN);
BD2802_CONTROL_RGBS(led1b, LED1, BLUE);
BD2802_CONTROL_RGBS(led2r, LED2, RED);
BD2802_CONTROL_RGBS(led2g, LED2, GREEN);
BD2802_CONTROL_RGBS(led2b, LED2, BLUE);
static int bd2802_register_led_classdev(struct bd2802_led *led)
{
int ret;
led->cdev_led1r.name = "led1_R";
led->cdev_led1r.brightness = LED_OFF;
led->cdev_led1r.brightness_set_blocking = bd2802_set_led1r_brightness;
led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led1r.name);
goto failed_unregister_led1_R;
}
led->cdev_led1g.name = "led1_G";
led->cdev_led1g.brightness = LED_OFF;
led->cdev_led1g.brightness_set_blocking = bd2802_set_led1g_brightness;
led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led1g.name);
goto failed_unregister_led1_G;
}
led->cdev_led1b.name = "led1_B";
led->cdev_led1b.brightness = LED_OFF;
led->cdev_led1b.brightness_set_blocking = bd2802_set_led1b_brightness;
led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led1b.name);
goto failed_unregister_led1_B;
}
led->cdev_led2r.name = "led2_R";
led->cdev_led2r.brightness = LED_OFF;
led->cdev_led2r.brightness_set_blocking = bd2802_set_led2r_brightness;
led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led2r.name);
goto failed_unregister_led2_R;
}
led->cdev_led2g.name = "led2_G";
led->cdev_led2g.brightness = LED_OFF;
led->cdev_led2g.brightness_set_blocking = bd2802_set_led2g_brightness;
led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led2g.name);
goto failed_unregister_led2_G;
}
led->cdev_led2b.name = "led2_B";
led->cdev_led2b.brightness = LED_OFF;
led->cdev_led2b.brightness_set_blocking = bd2802_set_led2b_brightness;
led->cdev_led2b.blink_set = bd2802_set_led2b_blink;
led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2b);
if (ret < 0) {
dev_err(&led->client->dev, "couldn't register LED %s\n",
led->cdev_led2b.name);
goto failed_unregister_led2_B;
}
return 0;
failed_unregister_led2_B:
led_classdev_unregister(&led->cdev_led2g);
failed_unregister_led2_G:
led_classdev_unregister(&led->cdev_led2r);
failed_unregister_led2_R:
led_classdev_unregister(&led->cdev_led1b);
failed_unregister_led1_B:
led_classdev_unregister(&led->cdev_led1g);
failed_unregister_led1_G:
led_classdev_unregister(&led->cdev_led1r);
failed_unregister_led1_R:
return ret;
}
static void bd2802_unregister_led_classdev(struct bd2802_led *led)
{
led_classdev_unregister(&led->cdev_led2b);
led_classdev_unregister(&led->cdev_led2g);
led_classdev_unregister(&led->cdev_led2r);
led_classdev_unregister(&led->cdev_led1b);
led_classdev_unregister(&led->cdev_led1g);
led_classdev_unregister(&led->cdev_led1r);
}
static int bd2802_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bd2802_led *led;
struct bd2802_led_platform_data *pdata;
int ret, i;
led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->client = client;
pdata = led->pdata = dev_get_platdata(&client->dev);
i2c_set_clientdata(client, led);
/* Configure RESET GPIO (L: RESET, H: RESET cancel) */
gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
/* Tacss = min 0.1ms */
udelay(100);
/* Detect BD2802GU */
ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
if (ret < 0) {
dev_err(&client->dev, "failed to detect device\n");
return ret;
} else
dev_info(&client->dev, "return 0x%02x\n", ret);
/* To save the power, reset BD2802 after detecting */
gpio_set_value(led->pdata->reset_gpio, 0);
/* Default attributes */
led->wave_pattern = BD2802_PATTERN_HALF;
led->rgb_current = BD2802_CURRENT_032;
init_rwsem(&led->rwsem);
for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
ret = device_create_file(&led->client->dev,
bd2802_attributes[i]);
if (ret) {
dev_err(&led->client->dev, "failed: sysfs file %s\n",
bd2802_attributes[i]->attr.name);
goto failed_unregister_dev_file;
}
}
ret = bd2802_register_led_classdev(led);
if (ret < 0)
goto failed_unregister_dev_file;
return 0;
failed_unregister_dev_file:
for (i--; i >= 0; i--)
device_remove_file(&led->client->dev, bd2802_attributes[i]);
return ret;
}
static int bd2802_remove(struct i2c_client *client)
{
struct bd2802_led *led = i2c_get_clientdata(client);
int i;
gpio_set_value(led->pdata->reset_gpio, 0);
bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
device_remove_file(&led->client->dev, bd2802_attributes[i]);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static void bd2802_restore_state(struct bd2802_led *led)
{
int i;
for (i = 0; i < LED_NUM; i++) {
if (led->led[i].r)
bd2802_turn_on(led, i, RED, led->led[i].r);
if (led->led[i].g)
bd2802_turn_on(led, i, GREEN, led->led[i].g);
if (led->led[i].b)
bd2802_turn_on(led, i, BLUE, led->led[i].b);
}
}
static int bd2802_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bd2802_led *led = i2c_get_clientdata(client);
gpio_set_value(led->pdata->reset_gpio, 0);
return 0;
}
static int bd2802_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bd2802_led *led = i2c_get_clientdata(client);
if (!bd2802_is_all_off(led) || led->adf_on) {
bd2802_reset_cancel(led);
bd2802_restore_state(led);
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
static const struct i2c_device_id bd2802_id[] = {
{ "BD2802", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, bd2802_id);
static struct i2c_driver bd2802_i2c_driver = {
.driver = {
.name = "BD2802",
.pm = &bd2802_pm,
},
.probe = bd2802_probe,
.remove = bd2802_remove,
.id_table = bd2802_id,
};
module_i2c_driver(bd2802_i2c_driver);
MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
MODULE_DESCRIPTION("BD2802 LED driver");
MODULE_LICENSE("GPL v2");