431 lines
11 KiB
C
431 lines
11 KiB
C
/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* Copyright (C) 2005-6 DiBcom, SA
|
|
*/
|
|
#include "dib0700.h"
|
|
|
|
/* debug */
|
|
int dvb_usb_dib0700_debug;
|
|
module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
|
|
|
|
int dvb_usb_dib0700_ir_proto = 1;
|
|
module_param(dvb_usb_dib0700_ir_proto, int, 0644);
|
|
MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6).");
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
/* expecting rx buffer: request data[0] data[1] ... data[2] */
|
|
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
|
|
{
|
|
int status;
|
|
|
|
deb_data(">>> ");
|
|
debug_dump(tx,txlen,deb_data);
|
|
|
|
status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
|
|
tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
|
|
if (status != txlen)
|
|
deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
|
|
|
|
return status < 0 ? status : 0;
|
|
}
|
|
|
|
/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */
|
|
int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
|
|
{
|
|
u16 index, value;
|
|
int status;
|
|
|
|
if (txlen < 2) {
|
|
err("tx buffer length is smaller than 2. Makes no sense.");
|
|
return -EINVAL;
|
|
}
|
|
if (txlen > 4) {
|
|
err("tx buffer length is larger than 4. Not supported.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
deb_data(">>> ");
|
|
debug_dump(tx,txlen,deb_data);
|
|
|
|
value = ((txlen - 2) << 8) | tx[1];
|
|
index = 0;
|
|
if (txlen > 2)
|
|
index |= (tx[2] << 8);
|
|
if (txlen > 3)
|
|
index |= tx[3];
|
|
|
|
status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0],
|
|
USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
|
|
if (status < 0)
|
|
deb_info("ep 0 read error (status = %d)\n",status);
|
|
|
|
deb_data("<<< ");
|
|
debug_dump(rx,rxlen,deb_data);
|
|
|
|
return status; /* length in case of success */
|
|
}
|
|
|
|
int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
|
|
{
|
|
u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
|
|
return dib0700_ctrl_wr(d,buf,3);
|
|
}
|
|
|
|
/*
|
|
* I2C master xfer function (supported in 1.20 firmware)
|
|
*/
|
|
static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
|
|
int num)
|
|
{
|
|
/* The new i2c firmware messages are more reliable and in particular
|
|
properly support i2c read calls not preceded by a write */
|
|
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */
|
|
uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */
|
|
uint8_t en_start = 0;
|
|
uint8_t en_stop = 0;
|
|
uint8_t buf[255]; /* TBV: malloc ? */
|
|
int result, i;
|
|
|
|
/* Ensure nobody else hits the i2c bus while we're sending our
|
|
sequence of messages, (such as the remote control thread) */
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if (i == 0) {
|
|
/* First message in the transaction */
|
|
en_start = 1;
|
|
} else if (!(msg[i].flags & I2C_M_NOSTART)) {
|
|
/* Device supports repeated-start */
|
|
en_start = 1;
|
|
} else {
|
|
/* Not the first packet and device doesn't support
|
|
repeated start */
|
|
en_start = 0;
|
|
}
|
|
if (i == (num - 1)) {
|
|
/* Last message in the transaction */
|
|
en_stop = 1;
|
|
}
|
|
|
|
if (msg[i].flags & I2C_M_RD) {
|
|
/* Read request */
|
|
u16 index, value;
|
|
uint8_t i2c_dest;
|
|
|
|
i2c_dest = (msg[i].addr << 1);
|
|
value = ((en_start << 7) | (en_stop << 6) |
|
|
(msg[i].len & 0x3F)) << 8 | i2c_dest;
|
|
/* I2C ctrl + FE bus; */
|
|
index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
|
|
|
|
result = usb_control_msg(d->udev,
|
|
usb_rcvctrlpipe(d->udev, 0),
|
|
REQUEST_NEW_I2C_READ,
|
|
USB_TYPE_VENDOR | USB_DIR_IN,
|
|
value, index, msg[i].buf,
|
|
msg[i].len,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
if (result < 0) {
|
|
err("i2c read error (status = %d)\n", result);
|
|
break;
|
|
}
|
|
} else {
|
|
/* Write request */
|
|
buf[0] = REQUEST_NEW_I2C_WRITE;
|
|
buf[1] = (msg[i].addr << 1);
|
|
buf[2] = (en_start << 7) | (en_stop << 6) |
|
|
(msg[i].len & 0x3F);
|
|
/* I2C ctrl + FE bus; */
|
|
buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
|
|
/* The Actual i2c payload */
|
|
memcpy(&buf[4], msg[i].buf, msg[i].len);
|
|
|
|
result = usb_control_msg(d->udev,
|
|
usb_sndctrlpipe(d->udev, 0),
|
|
REQUEST_NEW_I2C_WRITE,
|
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
|
0, 0, buf, msg[i].len + 4,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
if (result < 0) {
|
|
err("i2c write error (status = %d)\n", result);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
* I2C master xfer function (pre-1.20 firmware)
|
|
*/
|
|
static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
|
|
struct i2c_msg *msg, int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int i,len;
|
|
u8 buf[255];
|
|
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
/* fill in the address */
|
|
buf[1] = (msg[i].addr << 1);
|
|
/* fill the buffer */
|
|
memcpy(&buf[2], msg[i].buf, msg[i].len);
|
|
|
|
/* write/read request */
|
|
if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
|
|
buf[0] = REQUEST_I2C_READ;
|
|
buf[1] |= 1;
|
|
|
|
/* special thing in the current firmware: when length is zero the read-failed */
|
|
if ((len = dib0700_ctrl_rd(d, buf, msg[i].len + 2, msg[i+1].buf, msg[i+1].len)) <= 0) {
|
|
deb_info("I2C read failed on address %x\n", msg[i].addr);
|
|
break;
|
|
}
|
|
|
|
msg[i+1].len = len;
|
|
|
|
i++;
|
|
} else {
|
|
buf[0] = REQUEST_I2C_WRITE;
|
|
if (dib0700_ctrl_wr(d, buf, msg[i].len + 2) < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return i;
|
|
}
|
|
|
|
static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
struct dib0700_state *st = d->priv;
|
|
|
|
if (st->fw_use_new_i2c_api == 1) {
|
|
/* User running at least fw 1.20 */
|
|
return dib0700_i2c_xfer_new(adap, msg, num);
|
|
} else {
|
|
/* Use legacy calls */
|
|
return dib0700_i2c_xfer_legacy(adap, msg, num);
|
|
}
|
|
}
|
|
|
|
static u32 dib0700_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
struct i2c_algorithm dib0700_i2c_algo = {
|
|
.master_xfer = dib0700_i2c_xfer,
|
|
.functionality = dib0700_i2c_func,
|
|
};
|
|
|
|
int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
|
|
struct dvb_usb_device_description **desc, int *cold)
|
|
{
|
|
u8 b[16];
|
|
s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
|
|
REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
|
|
|
|
deb_info("FW GET_VERSION length: %d\n",ret);
|
|
|
|
*cold = ret <= 0;
|
|
|
|
deb_info("cold: %d\n", *cold);
|
|
return 0;
|
|
}
|
|
|
|
static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
|
|
u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
|
|
u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
|
|
{
|
|
u8 b[10];
|
|
b[0] = REQUEST_SET_CLOCK;
|
|
b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4);
|
|
b[2] = (pll_prediv >> 8) & 0xff; // MSB
|
|
b[3] = pll_prediv & 0xff; // LSB
|
|
b[4] = (pll_loopdiv >> 8) & 0xff; // MSB
|
|
b[5] = pll_loopdiv & 0xff; // LSB
|
|
b[6] = (free_div >> 8) & 0xff; // MSB
|
|
b[7] = free_div & 0xff; // LSB
|
|
b[8] = (dsuScaler >> 8) & 0xff; // MSB
|
|
b[9] = dsuScaler & 0xff; // LSB
|
|
|
|
return dib0700_ctrl_wr(d, b, 10);
|
|
}
|
|
|
|
int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
|
|
{
|
|
switch (clk_MHz) {
|
|
case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
|
|
default: return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dib0700_jumpram(struct usb_device *udev, u32 address)
|
|
{
|
|
int ret, actlen;
|
|
u8 buf[8] = { REQUEST_JUMPRAM, 0, 0, 0,
|
|
(address >> 24) & 0xff,
|
|
(address >> 16) & 0xff,
|
|
(address >> 8) & 0xff,
|
|
address & 0xff };
|
|
|
|
if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) {
|
|
deb_fw("jumpram to 0x%x failed\n",address);
|
|
return ret;
|
|
}
|
|
if (actlen != 8) {
|
|
deb_fw("jumpram to 0x%x failed\n",address);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
|
|
{
|
|
struct hexline hx;
|
|
int pos = 0, ret, act_len;
|
|
|
|
u8 buf[260];
|
|
|
|
while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
|
|
deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
|
|
|
|
buf[0] = hx.len;
|
|
buf[1] = (hx.addr >> 8) & 0xff;
|
|
buf[2] = hx.addr & 0xff;
|
|
buf[3] = hx.type;
|
|
memcpy(&buf[4],hx.data,hx.len);
|
|
buf[4+hx.len] = hx.chk;
|
|
|
|
ret = usb_bulk_msg(udev,
|
|
usb_sndbulkpipe(udev, 0x01),
|
|
buf,
|
|
hx.len + 5,
|
|
&act_len,
|
|
1000);
|
|
|
|
if (ret < 0) {
|
|
err("firmware download failed at %d with %d",pos,ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (ret == 0) {
|
|
/* start the firmware */
|
|
if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
|
|
info("firmware started successfully.");
|
|
msleep(500);
|
|
}
|
|
} else
|
|
ret = -EIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
u8 b[4];
|
|
|
|
b[0] = REQUEST_ENABLE_VIDEO;
|
|
b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */
|
|
b[2] = (0x01 << 4); /* Master mode */
|
|
b[3] = 0x00;
|
|
|
|
deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);
|
|
|
|
if (onoff)
|
|
st->channel_state |= 1 << adap->id;
|
|
else
|
|
st->channel_state &= ~(1 << adap->id);
|
|
|
|
b[2] |= st->channel_state;
|
|
|
|
deb_info("data for streaming: %x %x\n",b[1],b[2]);
|
|
|
|
return dib0700_ctrl_wr(adap->dev, b, 4);
|
|
}
|
|
|
|
int dib0700_rc_setup(struct dvb_usb_device *d)
|
|
{
|
|
u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
|
|
int i = dib0700_ctrl_wr(d, rc_setup, 3);
|
|
if (i<0) {
|
|
err("ir protocol setup failed");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dib0700_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
int i;
|
|
struct dvb_usb_device *dev;
|
|
|
|
for (i = 0; i < dib0700_device_count; i++)
|
|
if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE,
|
|
&dev, adapter_nr) == 0)
|
|
{
|
|
dib0700_rc_setup(dev);
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct usb_driver dib0700_driver = {
|
|
.name = "dvb_usb_dib0700",
|
|
.probe = dib0700_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = dib0700_usb_id_table,
|
|
};
|
|
|
|
/* module stuff */
|
|
static int __init dib0700_module_init(void)
|
|
{
|
|
int result;
|
|
info("loaded with support for %d different device-types", dib0700_device_count);
|
|
if ((result = usb_register(&dib0700_driver))) {
|
|
err("usb_register failed. Error number %d",result);
|
|
return result;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit dib0700_module_exit(void)
|
|
{
|
|
/* deregister this driver from the USB subsystem */
|
|
usb_deregister(&dib0700_driver);
|
|
}
|
|
|
|
module_init (dib0700_module_init);
|
|
module_exit (dib0700_module_exit);
|
|
|
|
MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
|
|
MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge");
|
|
MODULE_VERSION("1.0");
|
|
MODULE_LICENSE("GPL");
|