linux/drivers/scsi/device_handler/scsi_dh_emc.c

679 lines
17 KiB
C

/*
* Target driver for EMC CLARiiON AX/CX-series hardware.
* Based on code from Lars Marowsky-Bree <lmb@suse.de>
* and Ed Goggin <egoggin@emc.com>.
*
* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
* Copyright (C) 2006 Mike Christie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#include <scsi/scsi_device.h>
#define CLARIION_NAME "emc"
#define CLARIION_TRESPASS_PAGE 0x22
#define CLARIION_BUFFER_SIZE 0xFC
#define CLARIION_TIMEOUT (60 * HZ)
#define CLARIION_RETRIES 3
#define CLARIION_UNBOUND_LU -1
#define CLARIION_SP_A 0
#define CLARIION_SP_B 1
/* Flags */
#define CLARIION_SHORT_TRESPASS 1
#define CLARIION_HONOR_RESERVATIONS 2
/* LUN states */
#define CLARIION_LUN_UNINITIALIZED -1
#define CLARIION_LUN_UNBOUND 0
#define CLARIION_LUN_BOUND 1
#define CLARIION_LUN_OWNED 2
static unsigned char long_trespass[] = {
0, 0, 0, 0, 0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x09, /* Page length - 2 */
0x01, /* Trespass code */
0xff, 0xff, /* Trespass target */
0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
};
static unsigned char short_trespass[] = {
0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x02, /* Page length - 2 */
0x01, /* Trespass code */
0xff, /* Trespass target */
};
static const char * lun_state[] =
{
"not bound",
"bound",
"owned",
};
struct clariion_dh_data {
/*
* Flags:
* CLARIION_SHORT_TRESPASS
* Use short trespass command (FC-series) or the long version
* (default for AX/CX CLARiiON arrays).
*
* CLARIION_HONOR_RESERVATIONS
* Whether or not (default) to honor SCSI reservations when
* initiating a switch-over.
*/
unsigned flags;
/*
* I/O buffer for both MODE_SELECT and INQUIRY commands.
*/
unsigned char buffer[CLARIION_BUFFER_SIZE];
/*
* SCSI sense buffer for commands -- assumes serial issuance
* and completion sequence of all commands for same multipath.
*/
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
unsigned int senselen;
/*
* LUN state
*/
int lun_state;
/*
* SP Port number
*/
int port;
/*
* which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
* path's mapped LUN
*/
int default_sp;
/*
* which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
* path's mapped LUN
*/
int current_sp;
};
static inline struct clariion_dh_data
*get_clariion_data(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
BUG_ON(scsi_dh_data == NULL);
return ((struct clariion_dh_data *) scsi_dh_data->buf);
}
/*
* Parse MODE_SELECT cmd reply.
*/
static int trespass_endio(struct scsi_device *sdev, char *sense)
{
int err = SCSI_DH_IO;
struct scsi_sense_hdr sshdr;
if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
"0x%2x, 0x%2x while sending CLARiiON trespass "
"command.\n", CLARIION_NAME, sshdr.sense_key,
sshdr.asc, sshdr.ascq);
if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
(sshdr.ascq == 0x00)) {
/*
* Array based copy in progress -- do not send
* mode_select or copy will be aborted mid-stream.
*/
sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
"progress while sending CLARiiON trespass "
"command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
(sshdr.ascq == 0x03)) {
/*
* LUN Not Ready - Manual Intervention Required
* indicates in-progress ucode upgrade (NDU).
*/
sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
"ucode upgrade NDU operation while sending "
"CLARiiON trespass command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else
err = SCSI_DH_DEV_FAILED;
} else {
sdev_printk(KERN_INFO, sdev,
"%s: failed to send MODE SELECT, no sense available\n",
CLARIION_NAME);
}
return err;
}
static int parse_sp_info_reply(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err = SCSI_DH_OK;
/* check for in-progress ucode upgrade (NDU) */
if (csdev->buffer[48] != 0) {
sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
"ucode upgrade NDU operation while finding "
"current active SP.", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
goto out;
}
if (csdev->buffer[4] > 2) {
/* Invalid buffer format */
sdev_printk(KERN_NOTICE, sdev,
"%s: invalid VPD page 0xC0 format\n",
CLARIION_NAME);
err = SCSI_DH_NOSYS;
goto out;
}
switch (csdev->buffer[28] & 0x0f) {
case 6:
sdev_printk(KERN_NOTICE, sdev,
"%s: ALUA failover mode detected\n",
CLARIION_NAME);
break;
case 4:
/* Linux failover */
break;
default:
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid failover mode %d\n",
CLARIION_NAME, csdev->buffer[28] & 0x0f);
err = SCSI_DH_NOSYS;
goto out;
}
csdev->default_sp = csdev->buffer[5];
csdev->lun_state = csdev->buffer[4];
csdev->current_sp = csdev->buffer[8];
csdev->port = csdev->buffer[7];
out:
return err;
}
#define emc_default_str "FC (Legacy)"
static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
{
unsigned char len = buffer[4] + 5;
char *sp_model = NULL;
unsigned char sp_len, serial_len;
if (len < 160) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid information section length %d\n",
CLARIION_NAME, len);
/* Check for old FC arrays */
if (!strncmp(buffer + 8, "DGC", 3)) {
/* Old FC array, not supporting extended information */
sp_model = emc_default_str;
}
goto out;
}
/*
* Parse extended information for SP model number
*/
serial_len = buffer[160];
if (serial_len == 0 || serial_len + 161 > len) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid array serial number length %d\n",
CLARIION_NAME, serial_len);
goto out;
}
sp_len = buffer[99];
if (sp_len == 0 || serial_len + sp_len + 161 > len) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid model number length %d\n",
CLARIION_NAME, sp_len);
goto out;
}
sp_model = &buffer[serial_len + 161];
/* Strip whitespace at the end */
while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
sp_len--;
sp_model[sp_len] = '\0';
out:
return sp_model;
}
/*
* Get block request for REQ_BLOCK_PC command issued to path. Currently
* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
*
* Uses data and sense buffers in hardware handler context structure and
* assumes serial servicing of commands, both issuance and completion.
*/
static struct request *get_req(struct scsi_device *sdev, int cmd,
unsigned char *buffer)
{
struct request *rq;
int len = 0;
rq = blk_get_request(sdev->request_queue,
(cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO);
if (!rq) {
sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
return NULL;
}
rq->cmd_len = COMMAND_SIZE(cmd);
rq->cmd[0] = cmd;
switch (cmd) {
case MODE_SELECT:
len = sizeof(short_trespass);
rq->cmd_flags |= REQ_RW;
rq->cmd[1] = 0x10;
break;
case MODE_SELECT_10:
len = sizeof(long_trespass);
rq->cmd_flags |= REQ_RW;
rq->cmd[1] = 0x10;
break;
case INQUIRY:
len = CLARIION_BUFFER_SIZE;
memset(buffer, 0, len);
break;
default:
BUG_ON(1);
break;
}
rq->cmd[4] = len;
rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
rq->timeout = CLARIION_TIMEOUT;
rq->retries = CLARIION_RETRIES;
if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
blk_put_request(rq);
return NULL;
}
return rq;
}
static int send_inquiry_cmd(struct scsi_device *sdev, int page,
struct clariion_dh_data *csdev)
{
struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
int err;
if (!rq)
return SCSI_DH_RES_TEMP_UNAVAIL;
rq->sense = csdev->sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
rq->sense_len = csdev->senselen = 0;
rq->cmd[0] = INQUIRY;
if (page != 0) {
rq->cmd[1] = 1;
rq->cmd[2] = page;
}
err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
if (err == -EIO) {
sdev_printk(KERN_INFO, sdev,
"%s: failed to send %s INQUIRY: %x\n",
CLARIION_NAME, page?"EVPD":"standard",
rq->errors);
csdev->senselen = rq->sense_len;
err = SCSI_DH_IO;
}
blk_put_request(rq);
return err;
}
static int send_trespass_cmd(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
struct request *rq;
unsigned char *page22;
int err, len, cmd;
if (csdev->flags & CLARIION_SHORT_TRESPASS) {
page22 = short_trespass;
if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
/* Set Honor Reservations bit */
page22[6] |= 0x80;
len = sizeof(short_trespass);
cmd = MODE_SELECT;
} else {
page22 = long_trespass;
if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
/* Set Honor Reservations bit */
page22[10] |= 0x80;
len = sizeof(long_trespass);
cmd = MODE_SELECT_10;
}
BUG_ON((len > CLARIION_BUFFER_SIZE));
memcpy(csdev->buffer, page22, len);
rq = get_req(sdev, cmd, csdev->buffer);
if (!rq)
return SCSI_DH_RES_TEMP_UNAVAIL;
rq->sense = csdev->sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
rq->sense_len = csdev->senselen = 0;
err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
if (err == -EIO) {
if (rq->sense_len) {
err = trespass_endio(sdev, csdev->sense);
} else {
sdev_printk(KERN_INFO, sdev,
"%s: failed to send MODE SELECT: %x\n",
CLARIION_NAME, rq->errors);
}
}
blk_put_request(rq);
return err;
}
static int clariion_check_sense(struct scsi_device *sdev,
struct scsi_sense_hdr *sense_hdr)
{
switch (sense_hdr->sense_key) {
case NOT_READY:
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
/*
* LUN Not Ready - Manual Intervention Required
* indicates this is a passive path.
*
* FIXME: However, if this is seen and EVPD C0
* indicates that this is due to a NDU in
* progress, we should set FAIL_PATH too.
* This indicates we might have to do a SCSI
* inquiry in the end_io path. Ugh.
*
* Can return FAILED only when we want the error
* recovery process to kick in.
*/
return SUCCESS;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
/*
* An array based copy is in progress. Do not
* fail the path, do not bypass to another PG,
* do not retry. Fail the IO immediately.
* (Actually this is the same conclusion as in
* the default handler, but lets make sure.)
*
* Can return FAILED only when we want the error
* recovery process to kick in.
*/
return SUCCESS;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
/*
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
return ADD_TO_MLQUEUE;
break;
}
return SCSI_RETURN_NOT_HANDLED;
}
static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
{
struct clariion_dh_data *h = get_clariion_data(sdev);
int ret = BLKPREP_OK;
if (h->lun_state != CLARIION_LUN_OWNED) {
ret = BLKPREP_KILL;
req->cmd_flags |= REQ_QUIET;
}
return ret;
}
static int clariion_std_inquiry(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err;
char *sp_model;
err = send_inquiry_cmd(sdev, 0, csdev);
if (err != SCSI_DH_OK && csdev->senselen) {
struct scsi_sense_hdr sshdr;
if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
&sshdr)) {
sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
"%02x/%02x/%02x\n", CLARIION_NAME,
sshdr.sense_key, sshdr.asc, sshdr.ascq);
}
err = SCSI_DH_IO;
goto out;
}
sp_model = parse_sp_model(sdev, csdev->buffer);
if (!sp_model) {
err = SCSI_DH_DEV_UNSUPP;
goto out;
}
/*
* FC Series arrays do not support long trespass
*/
if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
csdev->flags |= CLARIION_SHORT_TRESPASS;
sdev_printk(KERN_INFO, sdev,
"%s: detected Clariion %s, flags %x\n",
CLARIION_NAME, sp_model, csdev->flags);
out:
return err;
}
static int clariion_send_inquiry(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err, retry = CLARIION_RETRIES;
retry:
err = send_inquiry_cmd(sdev, 0xC0, csdev);
if (err != SCSI_DH_OK && csdev->senselen) {
struct scsi_sense_hdr sshdr;
err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
&sshdr);
if (!err)
return SCSI_DH_IO;
err = clariion_check_sense(sdev, &sshdr);
if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
"%02x/%02x/%02x\n", CLARIION_NAME,
sshdr.sense_key, sshdr.asc, sshdr.ascq);
err = SCSI_DH_IO;
} else {
err = parse_sp_info_reply(sdev, csdev);
}
return err;
}
static int clariion_activate(struct scsi_device *sdev)
{
struct clariion_dh_data *csdev = get_clariion_data(sdev);
int result;
result = clariion_send_inquiry(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
if (csdev->lun_state == CLARIION_LUN_OWNED)
goto done;
result = send_trespass_cmd(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
CLARIION_NAME,
csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
/* Update status */
result = clariion_send_inquiry(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
done:
sdev_printk(KERN_INFO, sdev,
"%s: at SP %c Port %d (%s, default SP %c)\n",
CLARIION_NAME, csdev->current_sp + 'A',
csdev->port, lun_state[csdev->lun_state],
csdev->default_sp + 'A');
return result;
}
static const struct scsi_dh_devlist clariion_dev_list[] = {
{"DGC", "RAID"},
{"DGC", "DISK"},
{"DGC", "VRAID"},
{NULL, NULL},
};
static int clariion_bus_attach(struct scsi_device *sdev);
static void clariion_bus_detach(struct scsi_device *sdev);
static struct scsi_device_handler clariion_dh = {
.name = CLARIION_NAME,
.module = THIS_MODULE,
.devlist = clariion_dev_list,
.attach = clariion_bus_attach,
.detach = clariion_bus_detach,
.check_sense = clariion_check_sense,
.activate = clariion_activate,
.prep_fn = clariion_prep_fn,
};
/*
* TODO: need some interface so we can set trespass values
*/
static int clariion_bus_attach(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data;
struct clariion_dh_data *h;
unsigned long flags;
int err;
scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+ sizeof(*h) , GFP_KERNEL);
if (!scsi_dh_data) {
sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
CLARIION_NAME);
return -ENOMEM;
}
scsi_dh_data->scsi_dh = &clariion_dh;
h = (struct clariion_dh_data *) scsi_dh_data->buf;
h->lun_state = CLARIION_LUN_UNINITIALIZED;
h->default_sp = CLARIION_UNBOUND_LU;
h->current_sp = CLARIION_UNBOUND_LU;
err = clariion_std_inquiry(sdev, h);
if (err != SCSI_DH_OK)
goto failed;
err = clariion_send_inquiry(sdev, h);
if (err != SCSI_DH_OK)
goto failed;
if (!try_module_get(THIS_MODULE))
goto failed;
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = scsi_dh_data;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
sdev_printk(KERN_INFO, sdev,
"%s: connected to SP %c Port %d (%s, default SP %c)\n",
CLARIION_NAME, h->current_sp + 'A',
h->port, lun_state[h->lun_state],
h->default_sp + 'A');
return 0;
failed:
kfree(scsi_dh_data);
sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
CLARIION_NAME);
return -EINVAL;
}
static void clariion_bus_detach(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data;
unsigned long flags;
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
scsi_dh_data = sdev->scsi_dh_data;
sdev->scsi_dh_data = NULL;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n",
CLARIION_NAME);
kfree(scsi_dh_data);
module_put(THIS_MODULE);
}
static int __init clariion_init(void)
{
int r;
r = scsi_register_device_handler(&clariion_dh);
if (r != 0)
printk(KERN_ERR "%s: Failed to register scsi device handler.",
CLARIION_NAME);
return r;
}
static void __exit clariion_exit(void)
{
scsi_unregister_device_handler(&clariion_dh);
}
module_init(clariion_init);
module_exit(clariion_exit);
MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
MODULE_LICENSE("GPL");