b6ce068a12
We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
152 lines
3.8 KiB
C
152 lines
3.8 KiB
C
/*
|
|
* Low-Level PCI Access for i386 machines.
|
|
*
|
|
* (c) 1999 Martin Mares <mj@ucw.cz>
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
#define PCI_PROBE_BIOS 0x0001
|
|
#define PCI_PROBE_CONF1 0x0002
|
|
#define PCI_PROBE_CONF2 0x0004
|
|
#define PCI_PROBE_MMCONF 0x0008
|
|
#define PCI_PROBE_MASK 0x000f
|
|
#define PCI_PROBE_NOEARLY 0x0010
|
|
|
|
#define PCI_NO_SORT 0x0100
|
|
#define PCI_BIOS_SORT 0x0200
|
|
#define PCI_NO_CHECKS 0x0400
|
|
#define PCI_USE_PIRQ_MASK 0x0800
|
|
#define PCI_ASSIGN_ROMS 0x1000
|
|
#define PCI_BIOS_IRQ_SCAN 0x2000
|
|
#define PCI_ASSIGN_ALL_BUSSES 0x4000
|
|
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
|
|
#define PCI_USE__CRS 0x10000
|
|
|
|
extern unsigned int pci_probe;
|
|
extern unsigned long pirq_table_addr;
|
|
|
|
enum pci_bf_sort_state {
|
|
pci_bf_sort_default,
|
|
pci_force_nobf,
|
|
pci_force_bf,
|
|
pci_dmi_bf,
|
|
};
|
|
|
|
/* pci-i386.c */
|
|
|
|
extern unsigned int pcibios_max_latency;
|
|
|
|
void pcibios_resource_survey(void);
|
|
int pcibios_enable_resources(struct pci_dev *, int);
|
|
|
|
/* pci-pc.c */
|
|
|
|
extern int pcibios_last_bus;
|
|
extern struct pci_bus *pci_root_bus;
|
|
extern struct pci_ops pci_root_ops;
|
|
|
|
/* pci-irq.c */
|
|
|
|
struct irq_info {
|
|
u8 bus, devfn; /* Bus, device and function */
|
|
struct {
|
|
u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
|
|
u16 bitmap; /* Available IRQs */
|
|
} __attribute__((packed)) irq[4];
|
|
u8 slot; /* Slot number, 0=onboard */
|
|
u8 rfu;
|
|
} __attribute__((packed));
|
|
|
|
struct irq_routing_table {
|
|
u32 signature; /* PIRQ_SIGNATURE should be here */
|
|
u16 version; /* PIRQ_VERSION */
|
|
u16 size; /* Table size in bytes */
|
|
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
|
|
u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
|
|
u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
|
|
u32 miniport_data; /* Crap */
|
|
u8 rfu[11];
|
|
u8 checksum; /* Modulo 256 checksum must give zero */
|
|
struct irq_info slots[0];
|
|
} __attribute__((packed));
|
|
|
|
extern unsigned int pcibios_irq_mask;
|
|
|
|
extern int pcibios_scanned;
|
|
extern spinlock_t pci_config_lock;
|
|
|
|
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
|
|
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
|
|
|
|
struct pci_raw_ops {
|
|
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 *val);
|
|
int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 val);
|
|
};
|
|
|
|
extern struct pci_raw_ops *raw_pci_ops;
|
|
extern struct pci_raw_ops *raw_pci_ext_ops;
|
|
|
|
extern struct pci_raw_ops pci_direct_conf1;
|
|
|
|
extern int pci_direct_probe(void);
|
|
extern void pci_direct_init(int type);
|
|
extern void pci_pcbios_init(void);
|
|
extern void pci_mmcfg_init(int type);
|
|
extern void pcibios_sort(void);
|
|
|
|
/* pci-mmconfig.c */
|
|
|
|
extern int __init pci_mmcfg_arch_init(void);
|
|
|
|
/*
|
|
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
|
|
* on their northbrige except through the * %eax register. As such, you MUST
|
|
* NOT use normal IOMEM accesses, you need to only use the magic mmio-config
|
|
* accessor functions.
|
|
* In fact just use pci_config_*, nothing else please.
|
|
*/
|
|
static inline unsigned char mmio_config_readb(void __iomem *pos)
|
|
{
|
|
u8 val;
|
|
asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
|
|
return val;
|
|
}
|
|
|
|
static inline unsigned short mmio_config_readw(void __iomem *pos)
|
|
{
|
|
u16 val;
|
|
asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
|
|
return val;
|
|
}
|
|
|
|
static inline unsigned int mmio_config_readl(void __iomem *pos)
|
|
{
|
|
u32 val;
|
|
asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
|
|
return val;
|
|
}
|
|
|
|
static inline void mmio_config_writeb(void __iomem *pos, u8 val)
|
|
{
|
|
asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
|
|
}
|
|
|
|
static inline void mmio_config_writew(void __iomem *pos, u16 val)
|
|
{
|
|
asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
|
|
}
|
|
|
|
static inline void mmio_config_writel(void __iomem *pos, u32 val)
|
|
{
|
|
asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
|
|
}
|