linux/drivers/clk/ti
Olof Johansson bcec1221c9 Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
 more boot time errors and warnings:
 
 - The recent ti-sysc interconnect target module driver changes had
   incorrect clock bits for both clocks and dts that cause warnings
 
 - For omap3-gta04, gpio changes caused the LCD to break a while back,
   and after discussing things the right fix is to set spi-cs-high
 
 - Recent omapdrm changes to use generic panels caused tfp410 to be
   disabled as we now must enable the generic support for it in
   defconfig
 
 - Recent omapdrm and backlight changes also finally made droid4 LCD
   to work, so let's enable it in the defconfig it can be used out
   of the box. This is not strictly a fix, but we still also have the
   older CONFIG_MFD_TI_LMU options available so this cuts down the
   confusion for trying to guess which display and which backlight
   is needed
 
 - Recent ti-sysc interconnect target module changes need the gpio
   module disabled on some boards, but this now needs to happen at
   the module level, not at the gpio driver level
 
 - Recent changes to probe system timers with ti-sysc caused warnings
   about mismatch in syconfig registers, so let's configure the option
   for RESET_STATUS as available in the TRMs
 
 - Recent changes to probe LCDC with ti-sysc caused warnings about
   mismatch in sysconfig registers, so let's configure the missing
   idlemodes for both platform data and dts as documented in TRMs
 
 - Since we moved mach-omap2 to probe with device tree, we've been
   getting voltage controller warnings. Turns out this code is no
   longer needed, so let's just remove omap2_set_init_voltage() to
   get rid of the pointless warnings
 
 - Configure am4372 dispc memory bandwidth to avoid underflow errors
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4
 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0
 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl
 oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz
 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+
 CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx
 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS
 gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI
 N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo
 gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e
 sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd
 ZkiGMxkpLUY=
 =SkMF
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.4-rc cycle

Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:

- The recent ti-sysc interconnect target module driver changes had
  incorrect clock bits for both clocks and dts that cause warnings

- For omap3-gta04, gpio changes caused the LCD to break a while back,
  and after discussing things the right fix is to set spi-cs-high

- Recent omapdrm changes to use generic panels caused tfp410 to be
  disabled as we now must enable the generic support for it in
  defconfig

- Recent omapdrm and backlight changes also finally made droid4 LCD
  to work, so let's enable it in the defconfig it can be used out
  of the box. This is not strictly a fix, but we still also have the
  older CONFIG_MFD_TI_LMU options available so this cuts down the
  confusion for trying to guess which display and which backlight
  is needed

- Recent ti-sysc interconnect target module changes need the gpio
  module disabled on some boards, but this now needs to happen at
  the module level, not at the gpio driver level

- Recent changes to probe system timers with ti-sysc caused warnings
  about mismatch in syconfig registers, so let's configure the option
  for RESET_STATUS as available in the TRMs

- Recent changes to probe LCDC with ti-sysc caused warnings about
  mismatch in sysconfig registers, so let's configure the missing
  idlemodes for both platform data and dts as documented in TRMs

- Since we moved mach-omap2 to probe with device tree, we've been
  getting voltage controller warnings. Turns out this code is no
  longer needed, so let's just remove omap2_set_init_voltage() to
  get rid of the pointless warnings

- Configure am4372 dispc memory bandwidth to avoid underflow errors

* tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03 09:15:19 -07:00
..
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile clk: ti: dra7xx: rename existing clkctrl data as compat data 2018-10-03 15:02:27 +03:00
adpll.c clk: Remove io.h from clk-provider.h 2019-05-15 13:21:37 -07:00
apll.c clk: ti: Don't reference clk_init_data after registration 2019-08-16 10:22:46 -07:00
autoidle.c clk: ti: check clock type before doing autoidle ops 2019-02-15 16:47:55 +02:00
clk-2xxx.c Merge branch 'cleanup-clk-h-includes' into clk-next 2015-07-28 11:59:09 -07:00
clk-3xxx.c clk: ti: omap3: cleanup unnecessary clock aliases 2017-12-01 15:17:17 +02:00
clk-7xx-compat.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clk-7xx.c clk: ti: dra7: Fix mcasp8 clock bits 2019-09-23 10:32:37 -07:00
clk-33xx-compat.c clk: ti: am33xx: rename existing clkctrl data as compat data 2018-10-03 15:02:26 +03:00
clk-33xx.c clk: ti: am33xx: add new clkctrl data for am33xx 2018-10-03 15:02:26 +03:00
clk-43xx-compat.c clk: ti: am43xx: rename existing clkctrl data as compat data 2018-10-03 15:02:26 +03:00
clk-43xx.c clk: ti: am43xx: add new clkctrl data for am43xx 2018-10-03 15:02:27 +03:00
clk-44xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clk-54xx.c clk: ti: add clkctrl data omap5 sgx 2019-08-26 08:47:07 -07:00
clk-814x.c clk: ti: dm814x: Add of_node_put() to prevent memory leak 2019-08-07 15:26:39 -07:00
clk-816x.c clk: ti: dm816: add clkctrl clock data 2017-12-01 15:18:06 +02:00
clk-dra7-atl.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
clk.c clk: Remove io.h from clk-provider.h 2019-05-15 13:21:37 -07:00
clkctrl.c clk: ti: clkctrl: Fix returning uninitialized data 2019-06-06 11:19:46 -07:00
clkt_dflt.c clk: ti: convert to use proper register definition for all accesses 2017-03-08 13:06:15 +02:00
clkt_dpll.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clkt_iclk.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
clock.h clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices 2019-04-25 10:51:36 -07:00
clockdomain.c clk: ti: remove usage of CLK_IS_BASIC 2019-02-15 16:46:22 +02:00
composite.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
divider.c clk: ti: Remove unused functions 2019-06-07 11:54:48 -07:00
dpll.c Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next 2019-09-19 15:31:41 -07:00
dpll3xxx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
dpll44xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
fapll.c clk: Remove io.h from clk-provider.h 2019-05-15 13:21:37 -07:00
fixed-factor.c clk: Convert to using %pOFn instead of device_node.name 2018-08-30 09:50:20 -07:00
gate.c clk: ti: Remove unused functions 2019-06-07 11:54:48 -07:00
interface.c clk: ti: generalize the init sequence of clk_hw_omap clocks 2019-02-15 16:46:22 +02:00
mux.c clk: ti: Remove unused functions 2019-06-07 11:54:48 -07:00