34101237d9
This is a further step in allowing to build a kernel image for more than one imx SOC. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
284 lines
6.9 KiB
C
284 lines
6.9 KiB
C
/*
|
|
* Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/memory.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/common.h>
|
|
#include <asm/page.h>
|
|
#include <asm/setup.h>
|
|
#include <mach/board-qong.h>
|
|
#include <mach/imx-uart.h>
|
|
#include <mach/iomux-mx3.h>
|
|
#include "devices.h"
|
|
|
|
/* FPGA defines */
|
|
#define QONG_FPGA_VERSION(major, minor, rev) \
|
|
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
|
|
|
|
#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
|
|
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
|
|
|
|
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
|
|
#define QONG_FPGA_CTRL_SIZE 0x10
|
|
/* FPGA control registers */
|
|
#define QONG_FPGA_CTRL_VERSION 0x00
|
|
|
|
#define QONG_DNET_ID 1
|
|
#define QONG_DNET_BASEADDR \
|
|
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
|
|
#define QONG_DNET_SIZE 0x00001000
|
|
|
|
#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
|
|
|
|
/*
|
|
* This file contains the board-specific initialization routines.
|
|
*/
|
|
|
|
static struct imxuart_platform_data uart_pdata = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static int uart_pins[] = {
|
|
MX31_PIN_CTS1__CTS1,
|
|
MX31_PIN_RTS1__RTS1,
|
|
MX31_PIN_TXD1__TXD1,
|
|
MX31_PIN_RXD1__RXD1
|
|
};
|
|
|
|
static inline void mxc_init_imx_uart(void)
|
|
{
|
|
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
|
|
"uart-0");
|
|
mxc_register_device(&mxc_uart_device0, &uart_pdata);
|
|
}
|
|
|
|
static struct resource dnet_resources[] = {
|
|
{
|
|
.name = "dnet-memory",
|
|
.start = QONG_DNET_BASEADDR,
|
|
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = QONG_FPGA_IRQ,
|
|
.end = QONG_FPGA_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device dnet_device = {
|
|
.name = "dnet",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(dnet_resources),
|
|
.resource = dnet_resources,
|
|
};
|
|
|
|
static int __init qong_init_dnet(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_device_register(&dnet_device);
|
|
return ret;
|
|
}
|
|
|
|
/* MTD NOR flash */
|
|
|
|
static struct physmap_flash_data qong_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource qong_flash_resource = {
|
|
.start = MX31_CS0_BASE_ADDR,
|
|
.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device qong_nor_mtd_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &qong_flash_data,
|
|
},
|
|
.resource = &qong_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static void qong_init_nor_mtd(void)
|
|
{
|
|
(void)platform_device_register(&qong_nor_mtd_device);
|
|
}
|
|
|
|
/*
|
|
* Hardware specific access to control-lines
|
|
*/
|
|
static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
|
|
else
|
|
writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
|
|
}
|
|
|
|
/*
|
|
* Read the Device Ready pin.
|
|
*/
|
|
static int qong_nand_device_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
|
|
}
|
|
|
|
static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
if (chip >= 0)
|
|
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
|
|
else
|
|
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
|
|
}
|
|
|
|
static struct platform_nand_data qong_nand_data = {
|
|
.chip = {
|
|
.chip_delay = 20,
|
|
.options = 0,
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = qong_nand_cmd_ctrl,
|
|
.dev_ready = qong_nand_device_ready,
|
|
.select_chip = qong_nand_select_chip,
|
|
}
|
|
};
|
|
|
|
static struct resource qong_nand_resource = {
|
|
.start = MX31_CS3_BASE_ADDR,
|
|
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device qong_nand_device = {
|
|
.name = "gen_nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &qong_nand_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &qong_nand_resource,
|
|
};
|
|
|
|
static void __init qong_init_nand_mtd(void)
|
|
{
|
|
/* init CS */
|
|
mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
|
|
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
|
|
|
|
/* enable pin */
|
|
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
|
|
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
|
|
|
|
/* ready/busy pin */
|
|
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
|
|
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
|
|
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
|
|
|
|
/* write protect pin */
|
|
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
|
|
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
|
|
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
|
|
|
|
platform_device_register(&qong_nand_device);
|
|
}
|
|
|
|
static void __init qong_init_fpga(void)
|
|
{
|
|
void __iomem *regs;
|
|
u32 fpga_ver;
|
|
|
|
regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
|
|
if (!regs) {
|
|
printk(KERN_ERR "%s: failed to map registers, aborting.\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
|
|
iounmap(regs);
|
|
printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
|
|
(fpga_ver & 0xF000) >> 12,
|
|
(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
|
|
if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
|
|
printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
|
|
"devices won't be registered!\n");
|
|
return;
|
|
}
|
|
|
|
/* register FPGA-based devices */
|
|
qong_init_nand_mtd();
|
|
qong_init_dnet();
|
|
}
|
|
|
|
/*
|
|
* Board specific initialization.
|
|
*/
|
|
static void __init mxc_board_init(void)
|
|
{
|
|
mxc_init_imx_uart();
|
|
qong_init_nor_mtd();
|
|
qong_init_fpga();
|
|
}
|
|
|
|
static void __init qong_timer_init(void)
|
|
{
|
|
mx31_clocks_init(26000000);
|
|
}
|
|
|
|
static struct sys_timer qong_timer = {
|
|
.init = qong_timer_init,
|
|
};
|
|
|
|
/*
|
|
* The following uses standard kernel macros defined in arch.h in order to
|
|
* initialize __mach_desc_QONG data structure.
|
|
*/
|
|
|
|
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
|
|
/* Maintainer: DENX Software Engineering GmbH */
|
|
.phys_io = MX31_AIPS1_BASE_ADDR,
|
|
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
|
|
.boot_params = MX3x_PHYS_OFFSET + 0x100,
|
|
.map_io = mx31_map_io,
|
|
.init_irq = mx31_init_irq,
|
|
.init_machine = mxc_board_init,
|
|
.timer = &qong_timer,
|
|
MACHINE_END
|