linux/drivers/usb
Shinya Kuribayashi 934ccec4da USB: gpio_vbus: provide an appropriate debounce interval
In commit c2344f13b5 (USB: gpio_vbus:
add delayed vbus_session calls, 2009-01-24), usb_gadget_vbus_connect()
and ...disconnect() were extracted from the interrupt handler, so to
allow vbus_session handlers to deal with msleep() calls.

This patch takes the approach one step further.

USB2.0 specification (7.1.7.3 Connect and Disconnect Signaling) says
that the USB system software (shall) provide a debounce interval with
a minimum duration of 100 ms, which ensures that the electrical and
mechanical connection is stable before software attempts to reset
the attached device.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:01:50 -07:00
..
atm USB: xusbatm.c: remove dbg() usage 2012-05-01 21:33:30 -07:00
c67x00
chipidea usb: chipidea: drop unused field "device" from ci13xxx_ep 2012-05-11 16:59:36 -07:00
class USB: cdc-wdm: remove from device list on disconnect 2012-05-11 15:19:22 -07:00
core usb: Kconfig: remove unneeded default value 2012-05-14 08:49:50 -07:00
dwc3 usb: dwc3: Fix the dwc3 dependency 2012-05-11 15:17:31 -07:00
early
gadget usb: gadget: remove langwell_udc 2012-05-11 17:01:06 -07:00
host USB: ohci-omap: Use usb_put_transceiver instead of put_device 2012-05-14 08:49:50 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc USB: yurex.c: remove dbg() usage 2012-05-01 21:34:11 -07:00
mon
musb usb: musb: patches for v3.5 merge window 2012-05-07 10:02:01 -07:00
otg USB: gpio_vbus: provide an appropriate debounce interval 2012-05-14 09:01:50 -07:00
phy USB: Add driver for NXP ISP1301 USB transceiver 2012-05-01 13:33:02 -04:00
renesas_usbhs usb: renesas_usbhs: gadget: add support for set_selfpowered 2012-05-04 15:53:05 +03:00
serial USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial console 2012-05-11 15:14:07 -07:00
storage usb-storage: unusual_devs entry for Yarvik PMP400 MP4 player 2012-05-09 14:45:19 -07:00
wusbcore
Kconfig usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
Makefile usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: remove err() usage 2012-04-27 11:24:45 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.