8a340dbbc4
Commitc631f20068
("watchdog: imgpdc: Add reboot support") introduced a restart handler but forgot to unregister it on driver removal. Fix it. Fixes:c631f20068
("watchdog: imgpdc: Add reboot support") Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
349 lines
9.7 KiB
C
349 lines
9.7 KiB
C
/*
|
|
* Imagination Technologies PowerDown Controller Watchdog Timer.
|
|
*
|
|
* Copyright (c) 2014 Imagination Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
|
|
* 2012 Henrik Nordstrom
|
|
*
|
|
* Notes
|
|
* -----
|
|
* The timeout value is rounded to the next power of two clock cycles.
|
|
* This is configured using the PDC_WDT_CONFIG register, according to this
|
|
* formula:
|
|
*
|
|
* timeout = 2^(delay + 1) clock cycles
|
|
*
|
|
* Where 'delay' is the value written in PDC_WDT_CONFIG register.
|
|
*
|
|
* Therefore, the hardware only allows to program watchdog timeouts, expressed
|
|
* as a power of two number of watchdog clock cycles. The current implementation
|
|
* guarantees that the actual watchdog timeout will be _at least_ the value
|
|
* programmed in the imgpdg_wdt driver.
|
|
*
|
|
* The following table shows how the user-configured timeout relates
|
|
* to the actual hardware timeout (watchdog clock @ 40000 Hz):
|
|
*
|
|
* input timeout | WD_DELAY | actual timeout
|
|
* -----------------------------------
|
|
* 10 | 18 | 13 seconds
|
|
* 20 | 19 | 26 seconds
|
|
* 30 | 20 | 52 seconds
|
|
* 60 | 21 | 104 seconds
|
|
*
|
|
* Albeit coarse, this granularity would suffice most watchdog uses.
|
|
* If the platform allows it, the user should be able to change the watchdog
|
|
* clock rate and achieve a finer timeout granularity.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
/* registers */
|
|
#define PDC_WDT_SOFT_RESET 0x00
|
|
#define PDC_WDT_CONFIG 0x04
|
|
#define PDC_WDT_CONFIG_ENABLE BIT(31)
|
|
#define PDC_WDT_CONFIG_DELAY_MASK 0x1f
|
|
|
|
#define PDC_WDT_TICKLE1 0x08
|
|
#define PDC_WDT_TICKLE1_MAGIC 0xabcd1234
|
|
#define PDC_WDT_TICKLE2 0x0c
|
|
#define PDC_WDT_TICKLE2_MAGIC 0x4321dcba
|
|
|
|
#define PDC_WDT_TICKLE_STATUS_MASK 0x7
|
|
#define PDC_WDT_TICKLE_STATUS_SHIFT 0
|
|
#define PDC_WDT_TICKLE_STATUS_HRESET 0x0 /* Hard reset */
|
|
#define PDC_WDT_TICKLE_STATUS_TIMEOUT 0x1 /* Timeout */
|
|
#define PDC_WDT_TICKLE_STATUS_TICKLE 0x2 /* Tickled incorrectly */
|
|
#define PDC_WDT_TICKLE_STATUS_SRESET 0x3 /* Soft reset */
|
|
#define PDC_WDT_TICKLE_STATUS_USER 0x4 /* User reset */
|
|
|
|
/* Timeout values are in seconds */
|
|
#define PDC_WDT_MIN_TIMEOUT 1
|
|
#define PDC_WDT_DEF_TIMEOUT 64
|
|
|
|
static int heartbeat;
|
|
module_param(heartbeat, int, 0);
|
|
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
|
|
"(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
|
|
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
struct pdc_wdt_dev {
|
|
struct watchdog_device wdt_dev;
|
|
struct clk *wdt_clk;
|
|
struct clk *sys_clk;
|
|
void __iomem *base;
|
|
struct notifier_block restart_handler;
|
|
};
|
|
|
|
static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
|
|
{
|
|
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
|
|
|
|
writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1);
|
|
writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
|
|
{
|
|
unsigned int val;
|
|
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
|
|
|
|
val = readl(wdt->base + PDC_WDT_CONFIG);
|
|
val &= ~PDC_WDT_CONFIG_ENABLE;
|
|
writel(val, wdt->base + PDC_WDT_CONFIG);
|
|
|
|
/* Must tickle to finish the stop */
|
|
pdc_wdt_keepalive(wdt_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt)
|
|
{
|
|
unsigned long clk_rate = clk_get_rate(wdt->wdt_clk);
|
|
unsigned int val;
|
|
|
|
val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK;
|
|
val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1;
|
|
writel(val, wdt->base + PDC_WDT_CONFIG);
|
|
}
|
|
|
|
static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
|
|
unsigned int new_timeout)
|
|
{
|
|
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
|
|
|
|
wdt->wdt_dev.timeout = new_timeout;
|
|
|
|
__pdc_wdt_set_timeout(wdt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Start the watchdog timer (delay should already be set) */
|
|
static int pdc_wdt_start(struct watchdog_device *wdt_dev)
|
|
{
|
|
unsigned int val;
|
|
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
|
|
|
|
__pdc_wdt_set_timeout(wdt);
|
|
|
|
val = readl(wdt->base + PDC_WDT_CONFIG);
|
|
val |= PDC_WDT_CONFIG_ENABLE;
|
|
writel(val, wdt->base + PDC_WDT_CONFIG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct watchdog_info pdc_wdt_info = {
|
|
.identity = "IMG PDC Watchdog",
|
|
.options = WDIOF_SETTIMEOUT |
|
|
WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE,
|
|
};
|
|
|
|
static const struct watchdog_ops pdc_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = pdc_wdt_start,
|
|
.stop = pdc_wdt_stop,
|
|
.ping = pdc_wdt_keepalive,
|
|
.set_timeout = pdc_wdt_set_timeout,
|
|
};
|
|
|
|
static int pdc_wdt_restart(struct notifier_block *this, unsigned long mode,
|
|
void *cmd)
|
|
{
|
|
struct pdc_wdt_dev *wdt = container_of(this, struct pdc_wdt_dev,
|
|
restart_handler);
|
|
|
|
/* Assert SOFT_RESET */
|
|
writel(0x1, wdt->base + PDC_WDT_SOFT_RESET);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int pdc_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
u64 div;
|
|
int ret, val;
|
|
unsigned long clk_rate;
|
|
struct resource *res;
|
|
struct pdc_wdt_dev *pdc_wdt;
|
|
|
|
pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
|
|
if (!pdc_wdt)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pdc_wdt->base))
|
|
return PTR_ERR(pdc_wdt->base);
|
|
|
|
pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
|
|
if (IS_ERR(pdc_wdt->sys_clk)) {
|
|
dev_err(&pdev->dev, "failed to get the sys clock\n");
|
|
return PTR_ERR(pdc_wdt->sys_clk);
|
|
}
|
|
|
|
pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt");
|
|
if (IS_ERR(pdc_wdt->wdt_clk)) {
|
|
dev_err(&pdev->dev, "failed to get the wdt clock\n");
|
|
return PTR_ERR(pdc_wdt->wdt_clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(pdc_wdt->sys_clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not prepare or enable sys clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(pdc_wdt->wdt_clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not prepare or enable wdt clock\n");
|
|
goto disable_sys_clk;
|
|
}
|
|
|
|
/* We use the clock rate to calculate the max timeout */
|
|
clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
|
|
if (clk_rate == 0) {
|
|
dev_err(&pdev->dev, "failed to get clock rate\n");
|
|
ret = -EINVAL;
|
|
goto disable_wdt_clk;
|
|
}
|
|
|
|
if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) {
|
|
dev_err(&pdev->dev, "invalid clock rate\n");
|
|
ret = -EINVAL;
|
|
goto disable_wdt_clk;
|
|
}
|
|
|
|
if (order_base_2(clk_rate) == 0)
|
|
pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1;
|
|
else
|
|
pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT;
|
|
|
|
pdc_wdt->wdt_dev.info = &pdc_wdt_info;
|
|
pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
|
|
|
|
div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1);
|
|
do_div(div, clk_rate);
|
|
pdc_wdt->wdt_dev.max_timeout = div;
|
|
pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
|
|
pdc_wdt->wdt_dev.parent = &pdev->dev;
|
|
watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
|
|
|
|
watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev);
|
|
|
|
pdc_wdt_stop(&pdc_wdt->wdt_dev);
|
|
|
|
/* Find what caused the last reset */
|
|
val = readl(pdc_wdt->base + PDC_WDT_TICKLE1);
|
|
val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT;
|
|
switch (val) {
|
|
case PDC_WDT_TICKLE_STATUS_TICKLE:
|
|
case PDC_WDT_TICKLE_STATUS_TIMEOUT:
|
|
pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
|
|
dev_info(&pdev->dev,
|
|
"watchdog module last reset due to timeout\n");
|
|
break;
|
|
case PDC_WDT_TICKLE_STATUS_HRESET:
|
|
dev_info(&pdev->dev,
|
|
"watchdog module last reset due to hard reset\n");
|
|
break;
|
|
case PDC_WDT_TICKLE_STATUS_SRESET:
|
|
dev_info(&pdev->dev,
|
|
"watchdog module last reset due to soft reset\n");
|
|
break;
|
|
case PDC_WDT_TICKLE_STATUS_USER:
|
|
dev_info(&pdev->dev,
|
|
"watchdog module last reset due to user reset\n");
|
|
break;
|
|
default:
|
|
dev_info(&pdev->dev,
|
|
"contains an illegal status code (%08x)\n", val);
|
|
break;
|
|
}
|
|
|
|
watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
|
|
|
|
platform_set_drvdata(pdev, pdc_wdt);
|
|
|
|
ret = watchdog_register_device(&pdc_wdt->wdt_dev);
|
|
if (ret)
|
|
goto disable_wdt_clk;
|
|
|
|
pdc_wdt->restart_handler.notifier_call = pdc_wdt_restart;
|
|
pdc_wdt->restart_handler.priority = 128;
|
|
ret = register_restart_handler(&pdc_wdt->restart_handler);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to register restart handler: %d\n",
|
|
ret);
|
|
|
|
return 0;
|
|
|
|
disable_wdt_clk:
|
|
clk_disable_unprepare(pdc_wdt->wdt_clk);
|
|
disable_sys_clk:
|
|
clk_disable_unprepare(pdc_wdt->sys_clk);
|
|
return ret;
|
|
}
|
|
|
|
static void pdc_wdt_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
|
|
|
|
pdc_wdt_stop(&pdc_wdt->wdt_dev);
|
|
}
|
|
|
|
static int pdc_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
|
|
|
|
unregister_restart_handler(&pdc_wdt->restart_handler);
|
|
pdc_wdt_stop(&pdc_wdt->wdt_dev);
|
|
watchdog_unregister_device(&pdc_wdt->wdt_dev);
|
|
clk_disable_unprepare(pdc_wdt->wdt_clk);
|
|
clk_disable_unprepare(pdc_wdt->sys_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id pdc_wdt_match[] = {
|
|
{ .compatible = "img,pdc-wdt" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pdc_wdt_match);
|
|
|
|
static struct platform_driver pdc_wdt_driver = {
|
|
.driver = {
|
|
.name = "imgpdc-wdt",
|
|
.of_match_table = pdc_wdt_match,
|
|
},
|
|
.probe = pdc_wdt_probe,
|
|
.remove = pdc_wdt_remove,
|
|
.shutdown = pdc_wdt_shutdown,
|
|
};
|
|
module_platform_driver(pdc_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
|
|
MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
|
|
MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
|
|
MODULE_LICENSE("GPL v2");
|