..
Kconfig
usb: musb: omap2plus bus glue needs USB host support
2014-05-14 09:23:32 -05:00
Makefile
usb: musb: add support for JZ4740 usb device controller
2013-12-20 09:53:24 -06:00
am35x.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
blackfin.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
blackfin.h
…
cppi_dma.c
usb: musb: dma: merge ->start/stop into create/destroy
2013-07-29 13:53:18 +03:00
cppi_dma.h
…
da8xx.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
davinci.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
davinci.h
…
jz4740.c
usb: musb: register nop transceiver driver for jz4740
2014-07-10 08:36:50 -05:00
musb_am335x.c
usb: musb: Fix panic upon musb_am335x module removal
2014-06-27 10:53:06 -05:00
musb_core.c
usb: musb: try a race-free wakeup
2014-11-05 13:26:41 -06:00
musb_core.h
usb: musb: try a race-free wakeup
2014-11-05 13:26:41 -06:00
musb_cppi41.c
usb: musb: cppi41: restart hrtimer only if not yet done
2014-10-23 09:55:41 -05:00
musb_debug.h
…
musb_debugfs.c
…
musb_dma.h
usb: musb: introduce dma_channel.rx_packet_done
2014-06-30 14:26:24 -05:00
musb_dsps.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
musb_gadget.c
usb: musb: gadget: use udc-core's reset notifier
2014-11-10 17:19:34 -06:00
musb_gadget.h
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c
usb: musb: gadget: read ep0 fifo only if rxcount is non zero
2013-04-02 11:42:50 +03:00
musb_host.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
musb_host.h
usb: musb: fix prototype for musb_port_reset
2013-12-20 15:05:43 -06:00
musb_io.h
usb: musb: use io{read,write}*_rep accessors
2012-12-17 17:15:13 -08:00
musb_regs.h
usb: Fixed a few typos
2014-09-23 22:15:18 -07:00
musb_virthub.c
usb: musb: try a race-free wakeup
2014-11-05 13:26:41 -06:00
musbhsdma.c
usb: musb: dma: merge ->start/stop into create/destroy
2013-07-29 13:53:18 +03:00
musbhsdma.h
…
omap2430.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
omap2430.h
usb: start using the control module driver
2013-01-25 12:27:24 +02:00
tusb6010.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
tusb6010.h
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
tusb6010_omap.c
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
ux500.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
ux500_dma.c
usb: musb: ux500_dma: use dmaengine_xxx() APIs
2014-11-03 10:01:07 -06:00
1189f7f6dc