linux/drivers/scsi/sym53c8xx_2/sym_glue.h

258 lines
6.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
* of PCI-SCSI IO processors.
*
* Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
*
* This driver is derived from the Linux sym53c8xx driver.
* Copyright (C) 1998-2000 Gerard Roudier
*
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
* a port of the FreeBSD ncr driver to Linux-1.2.13.
*
* The original ncr driver has been written for 386bsd and FreeBSD by
* Wolfgang Stanglmeier <wolf@cologne.de>
* Stefan Esser <se@mi.Uni-Koeln.de>
* Copyright (C) 1994 Wolfgang Stanglmeier
*
* Other major contributions:
*
* NVRAM detection and reading.
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
*
*-----------------------------------------------------------------------------
*/
#ifndef SYM_GLUE_H
#define SYM_GLUE_H
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <asm/io.h>
#ifdef __sparc__
# include <asm/irq.h>
#endif
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport_spi.h>
#include <scsi/scsi_host.h>
#include "sym53c8xx.h"
#include "sym_defs.h"
#include "sym_misc.h"
/*
* Configuration addendum for Linux.
*/
#define SYM_CONF_TIMER_INTERVAL ((HZ+1)/2)
#undef SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
/*
* Print a message with severity.
*/
#define printf_emerg(args...) printk(KERN_EMERG args)
#define printf_alert(args...) printk(KERN_ALERT args)
#define printf_crit(args...) printk(KERN_CRIT args)
#define printf_err(args...) printk(KERN_ERR args)
#define printf_warning(args...) printk(KERN_WARNING args)
#define printf_notice(args...) printk(KERN_NOTICE args)
#define printf_info(args...) printk(KERN_INFO args)
#define printf_debug(args...) printk(KERN_DEBUG args)
#define printf(args...) printk(args)
/*
* A 'read barrier' flushes any data that have been prefetched
* by the processor due to out of order execution. Such a barrier
* must notably be inserted prior to looking at data that have
* been DMAed, assuming that program does memory READs in proper
* order and that the device ensured proper ordering of WRITEs.
*
* A 'write barrier' prevents any previous WRITEs to pass further
* WRITEs. Such barriers must be inserted each time another agent
* relies on ordering of WRITEs.
*
* Note that, due to posting of PCI memory writes, we also must
* insert dummy PCI read transactions when some ordering involving
* both directions over the PCI does matter. PCI transactions are
* fully ordered in each direction.
*/
#define MEMORY_READ_BARRIER() rmb()
#define MEMORY_WRITE_BARRIER() wmb()
/*
* IO functions definition for big/little endian CPU support.
* For now, PCI chips are only supported in little endian addressing mode,
*/
#ifdef __BIG_ENDIAN
#define readw_l2b readw
#define readl_l2b readl
#define writew_b2l writew
#define writel_b2l writel
#else /* little endian */
#define readw_raw readw
#define readl_raw readl
#define writew_raw writew
#define writel_raw writel
#endif /* endian */
#ifdef SYM_CONF_CHIP_BIG_ENDIAN
#error "Chips in BIG ENDIAN addressing mode are not (yet) supported"
#endif
/*
* If the CPU and the chip use same endian-ness addressing,
* no byte reordering is needed for script patching.
* Macro cpu_to_scr() is to be used for script patching.
* Macro scr_to_cpu() is to be used for getting a DWORD
* from the script.
*/
#define cpu_to_scr(dw) cpu_to_le32(dw)
#define scr_to_cpu(dw) le32_to_cpu(dw)
/*
* These ones are used as return code from
* error recovery handlers under Linux.
*/
#define SCSI_SUCCESS SUCCESS
#define SCSI_FAILED FAILED
/*
* System specific target data structure.
* None for now, under Linux.
*/
/* #define SYM_HAVE_STCB */
/*
* System specific lun data structure.
*/
#define SYM_HAVE_SLCB
struct sym_slcb {
u_short reqtags; /* Number of tags requested by user */
u_short scdev_depth; /* Queue depth set in select_queue_depth() */
};
/*
* System specific command data structure.
* Not needed under Linux.
*/
/* struct sym_sccb */
/*
* System specific host data structure.
*/
struct sym_shcb {
/*
* Chip and controller identification.
*/
int unit;
char inst_name[16];
char chip_name[8];
struct Scsi_Host *host;
void __iomem * ioaddr; /* MMIO kernel io address */
void __iomem * ramaddr; /* RAM kernel io address */
struct timer_list timer; /* Timer handler link header */
u_long lasttime;
u_long settle_time; /* Resetting the SCSI BUS */
u_char settle_time_valid;
};
/*
* Return the name of the controller.
*/
#define sym_name(np) (np)->s.inst_name
struct sym_nvram;
/*
* The IO macros require a struct called 's' and are abused in sym_nvram.c
*/
struct sym_device {
struct pci_dev *pdev;
unsigned long mmio_base;
unsigned long ram_base;
struct {
void __iomem *ioaddr;
void __iomem *ramaddr;
} s;
struct sym_chip chip;
struct sym_nvram *nvram;
u_char host_id;
};
/*
* Driver host data structure.
*/
struct sym_data {
struct sym_hcb *ncb;
struct completion *io_reset; /* PCI error handling */
struct pci_dev *pdev;
};
static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host)
{
return ((struct sym_data *)host->hostdata)->ncb;
}
#include "sym_fw.h"
#include "sym_hipd.h"
/*
* Set the status field of a CAM CCB.
*/
static inline void
sym_set_cam_status(struct scsi_cmnd *cmd, int status)
{
cmd->result &= ~(0xff << 16);
cmd->result |= (status << 16);
}
/*
* Get the status field of a CAM CCB.
*/
static inline int
sym_get_cam_status(struct scsi_cmnd *cmd)
{
return host_byte(cmd->result);
}
/*
* Build CAM result for a successful IO and for a failed IO.
*/
static inline void sym_set_cam_result_ok(struct sym_ccb *cp, struct scsi_cmnd *cmd, int resid)
{
scsi_set_resid(cmd, resid);
cmd->result = (DID_OK << 16) | (cp->ssss_status & 0x7f);
}
void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid);
void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb);
#define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
void sym_xpt_async_bus_reset(struct sym_hcb *np);
int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
void sym_log_bus_error(struct Scsi_Host *);
void sym_dump_registers(struct Scsi_Host *);
#endif /* SYM_GLUE_H */