b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
261 lines
13 KiB
C
261 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef B43_RADIO_2055_H_
|
|
#define B43_RADIO_2055_H_
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include "tables_nphy.h"
|
|
|
|
#define B2055_GEN_SPARE 0x00 /* GEN spare */
|
|
#define B2055_SP_PINPD 0x02 /* SP PIN PD */
|
|
#define B2055_C1_SP_RSSI 0x03 /* SP RSSI Core 1 */
|
|
#define B2055_C1_SP_PDMISC 0x04 /* SP PD MISC Core 1 */
|
|
#define B2055_C2_SP_RSSI 0x05 /* SP RSSI Core 2 */
|
|
#define B2055_C2_SP_PDMISC 0x06 /* SP PD MISC Core 2 */
|
|
#define B2055_C1_SP_RXGC1 0x07 /* SP RX GC1 Core 1 */
|
|
#define B2055_C1_SP_RXGC2 0x08 /* SP RX GC2 Core 1 */
|
|
#define B2055_C2_SP_RXGC1 0x09 /* SP RX GC1 Core 2 */
|
|
#define B2055_C2_SP_RXGC2 0x0A /* SP RX GC2 Core 2 */
|
|
#define B2055_C1_SP_LPFBWSEL 0x0B /* SP LPF BW select Core 1 */
|
|
#define B2055_C2_SP_LPFBWSEL 0x0C /* SP LPF BW select Core 2 */
|
|
#define B2055_C1_SP_TXGC1 0x0D /* SP TX GC1 Core 1 */
|
|
#define B2055_C1_SP_TXGC2 0x0E /* SP TX GC2 Core 1 */
|
|
#define B2055_C2_SP_TXGC1 0x0F /* SP TX GC1 Core 2 */
|
|
#define B2055_C2_SP_TXGC2 0x10 /* SP TX GC2 Core 2 */
|
|
#define B2055_MASTER1 0x11 /* Master control 1 */
|
|
#define B2055_MASTER2 0x12 /* Master control 2 */
|
|
#define B2055_PD_LGEN 0x13 /* PD LGEN */
|
|
#define B2055_PD_PLLTS 0x14 /* PD PLL TS */
|
|
#define B2055_C1_PD_LGBUF 0x15 /* PD Core 1 LGBUF */
|
|
#define B2055_C1_PD_TX 0x16 /* PD Core 1 TX */
|
|
#define B2055_C1_PD_RXTX 0x17 /* PD Core 1 RXTX */
|
|
#define B2055_C1_PD_RSSIMISC 0x18 /* PD Core 1 RSSI MISC */
|
|
#define B2055_C2_PD_LGBUF 0x19 /* PD Core 2 LGBUF */
|
|
#define B2055_C2_PD_TX 0x1A /* PD Core 2 TX */
|
|
#define B2055_C2_PD_RXTX 0x1B /* PD Core 2 RXTX */
|
|
#define B2055_C2_PD_RSSIMISC 0x1C /* PD Core 2 RSSI MISC */
|
|
#define B2055_PWRDET_LGEN 0x1D /* PWRDET LGEN */
|
|
#define B2055_C1_PWRDET_LGBUF 0x1E /* PWRDET LGBUF Core 1 */
|
|
#define B2055_C1_PWRDET_RXTX 0x1F /* PWRDET RXTX Core 1 */
|
|
#define B2055_C2_PWRDET_LGBUF 0x20 /* PWRDET LGBUF Core 2 */
|
|
#define B2055_C2_PWRDET_RXTX 0x21 /* PWRDET RXTX Core 2 */
|
|
#define B2055_RRCCAL_CS 0x22 /* RRCCAL Control spare */
|
|
#define B2055_RRCCAL_NOPTSEL 0x23 /* RRCCAL N OPT SEL */
|
|
#define B2055_CAL_MISC 0x24 /* CAL MISC */
|
|
#define B2055_CAL_COUT 0x25 /* CAL Counter out */
|
|
#define B2055_CAL_COUT2 0x26 /* CAL Counter out 2 */
|
|
#define B2055_CAL_CVARCTL 0x27 /* CAL CVAR Control */
|
|
#define B2055_CAL_RVARCTL 0x28 /* CAL RVAR Control */
|
|
#define B2055_CAL_LPOCTL 0x29 /* CAL LPO Control */
|
|
#define B2055_CAL_TS 0x2A /* CAL TS */
|
|
#define B2055_CAL_RCCALRTS 0x2B /* CAL RCCAL READ TS */
|
|
#define B2055_CAL_RCALRTS 0x2C /* CAL RCAL READ TS */
|
|
#define B2055_PADDRV 0x2D /* PAD driver */
|
|
#define B2055_XOCTL1 0x2E /* XO Control 1 */
|
|
#define B2055_XOCTL2 0x2F /* XO Control 2 */
|
|
#define B2055_XOREGUL 0x30 /* XO Regulator */
|
|
#define B2055_XOMISC 0x31 /* XO misc */
|
|
#define B2055_PLL_LFC1 0x32 /* PLL LF C1 */
|
|
#define B2055_PLL_CALVTH 0x33 /* PLL CAL VTH */
|
|
#define B2055_PLL_LFC2 0x34 /* PLL LF C2 */
|
|
#define B2055_PLL_REF 0x35 /* PLL reference */
|
|
#define B2055_PLL_LFR1 0x36 /* PLL LF R1 */
|
|
#define B2055_PLL_PFDCP 0x37 /* PLL PFD CP */
|
|
#define B2055_PLL_IDAC_CPOPAMP 0x38 /* PLL IDAC CPOPAMP */
|
|
#define B2055_PLL_CPREG 0x39 /* PLL CP Regulator */
|
|
#define B2055_PLL_RCAL 0x3A /* PLL RCAL */
|
|
#define B2055_RF_PLLMOD0 0x3B /* RF PLL MOD0 */
|
|
#define B2055_RF_PLLMOD1 0x3C /* RF PLL MOD1 */
|
|
#define B2055_RF_MMDIDAC1 0x3D /* RF MMD IDAC 1 */
|
|
#define B2055_RF_MMDIDAC0 0x3E /* RF MMD IDAC 0 */
|
|
#define B2055_RF_MMDSP 0x3F /* RF MMD spare */
|
|
#define B2055_VCO_CAL1 0x40 /* VCO cal 1 */
|
|
#define B2055_VCO_CAL2 0x41 /* VCO cal 2 */
|
|
#define B2055_VCO_CAL3 0x42 /* VCO cal 3 */
|
|
#define B2055_VCO_CAL4 0x43 /* VCO cal 4 */
|
|
#define B2055_VCO_CAL5 0x44 /* VCO cal 5 */
|
|
#define B2055_VCO_CAL6 0x45 /* VCO cal 6 */
|
|
#define B2055_VCO_CAL7 0x46 /* VCO cal 7 */
|
|
#define B2055_VCO_CAL8 0x47 /* VCO cal 8 */
|
|
#define B2055_VCO_CAL9 0x48 /* VCO cal 9 */
|
|
#define B2055_VCO_CAL10 0x49 /* VCO cal 10 */
|
|
#define B2055_VCO_CAL11 0x4A /* VCO cal 11 */
|
|
#define B2055_VCO_CAL12 0x4B /* VCO cal 12 */
|
|
#define B2055_VCO_CAL13 0x4C /* VCO cal 13 */
|
|
#define B2055_VCO_CAL14 0x4D /* VCO cal 14 */
|
|
#define B2055_VCO_CAL15 0x4E /* VCO cal 15 */
|
|
#define B2055_VCO_CAL16 0x4F /* VCO cal 16 */
|
|
#define B2055_VCO_KVCO 0x50 /* VCO KVCO */
|
|
#define B2055_VCO_CAPTAIL 0x51 /* VCO CAP TAIL */
|
|
#define B2055_VCO_IDACVCO 0x52 /* VCO IDAC VCO */
|
|
#define B2055_VCO_REG 0x53 /* VCO Regulator */
|
|
#define B2055_PLL_RFVTH 0x54 /* PLL RF VTH */
|
|
#define B2055_LGBUF_CENBUF 0x55 /* LGBUF CEN BUF */
|
|
#define B2055_LGEN_TUNE1 0x56 /* LGEN tune 1 */
|
|
#define B2055_LGEN_TUNE2 0x57 /* LGEN tune 2 */
|
|
#define B2055_LGEN_IDAC1 0x58 /* LGEN IDAC 1 */
|
|
#define B2055_LGEN_IDAC2 0x59 /* LGEN IDAC 2 */
|
|
#define B2055_LGEN_BIASC 0x5A /* LGEN BIAS counter */
|
|
#define B2055_LGEN_BIASIDAC 0x5B /* LGEN BIAS IDAC */
|
|
#define B2055_LGEN_RCAL 0x5C /* LGEN RCAL */
|
|
#define B2055_LGEN_DIV 0x5D /* LGEN div */
|
|
#define B2055_LGEN_SPARE2 0x5E /* LGEN spare 2 */
|
|
#define B2055_C1_LGBUF_ATUNE 0x5F /* Core 1 LGBUF A tune */
|
|
#define B2055_C1_LGBUF_GTUNE 0x60 /* Core 1 LGBUF G tune */
|
|
#define B2055_C1_LGBUF_DIV 0x61 /* Core 1 LGBUF div */
|
|
#define B2055_C1_LGBUF_AIDAC 0x62 /* Core 1 LGBUF A IDAC */
|
|
#define B2055_C1_LGBUF_GIDAC 0x63 /* Core 1 LGBUF G IDAC */
|
|
#define B2055_C1_LGBUF_IDACFO 0x64 /* Core 1 LGBUF IDAC filter override */
|
|
#define B2055_C1_LGBUF_SPARE 0x65 /* Core 1 LGBUF spare */
|
|
#define B2055_C1_RX_RFSPC1 0x66 /* Core 1 RX RF SPC1 */
|
|
#define B2055_C1_RX_RFR1 0x67 /* Core 1 RX RF reg 1 */
|
|
#define B2055_C1_RX_RFR2 0x68 /* Core 1 RX RF reg 2 */
|
|
#define B2055_C1_RX_RFRCAL 0x69 /* Core 1 RX RF RCAL */
|
|
#define B2055_C1_RX_BB_BLCMP 0x6A /* Core 1 RX Baseband BUFI LPF CMP */
|
|
#define B2055_C1_RX_BB_LPF 0x6B /* Core 1 RX Baseband LPF */
|
|
#define B2055_C1_RX_BB_MIDACHP 0x6C /* Core 1 RX Baseband MIDAC High-pass */
|
|
#define B2055_C1_RX_BB_VGA1IDAC 0x6D /* Core 1 RX Baseband VGA1 IDAC */
|
|
#define B2055_C1_RX_BB_VGA2IDAC 0x6E /* Core 1 RX Baseband VGA2 IDAC */
|
|
#define B2055_C1_RX_BB_VGA3IDAC 0x6F /* Core 1 RX Baseband VGA3 IDAC */
|
|
#define B2055_C1_RX_BB_BUFOCTL 0x70 /* Core 1 RX Baseband BUFO Control */
|
|
#define B2055_C1_RX_BB_RCCALCTL 0x71 /* Core 1 RX Baseband RCCAL Control */
|
|
#define B2055_C1_RX_BB_RSSICTL1 0x72 /* Core 1 RX Baseband RSSI Control 1 */
|
|
#define B2055_C1_RX_BB_RSSICTL2 0x73 /* Core 1 RX Baseband RSSI Control 2 */
|
|
#define B2055_C1_RX_BB_RSSICTL3 0x74 /* Core 1 RX Baseband RSSI Control 3 */
|
|
#define B2055_C1_RX_BB_RSSICTL4 0x75 /* Core 1 RX Baseband RSSI Control 4 */
|
|
#define B2055_C1_RX_BB_RSSICTL5 0x76 /* Core 1 RX Baseband RSSI Control 5 */
|
|
#define B2055_C1_RX_BB_REG 0x77 /* Core 1 RX Baseband Regulator */
|
|
#define B2055_C1_RX_BB_SPARE1 0x78 /* Core 1 RX Baseband spare 1 */
|
|
#define B2055_C1_RX_TXBBRCAL 0x79 /* Core 1 RX TX BB RCAL */
|
|
#define B2055_C1_TX_RF_SPGA 0x7A /* Core 1 TX RF SGM PGA */
|
|
#define B2055_C1_TX_RF_SPAD 0x7B /* Core 1 TX RF SGM PAD */
|
|
#define B2055_C1_TX_RF_CNTPGA1 0x7C /* Core 1 TX RF counter PGA 1 */
|
|
#define B2055_C1_TX_RF_CNTPAD1 0x7D /* Core 1 TX RF counter PAD 1 */
|
|
#define B2055_C1_TX_RF_PGAIDAC 0x7E /* Core 1 TX RF PGA IDAC */
|
|
#define B2055_C1_TX_PGAPADTN 0x7F /* Core 1 TX PGA PAD TN */
|
|
#define B2055_C1_TX_PADIDAC1 0x80 /* Core 1 TX PAD IDAC 1 */
|
|
#define B2055_C1_TX_PADIDAC2 0x81 /* Core 1 TX PAD IDAC 2 */
|
|
#define B2055_C1_TX_MXBGTRIM 0x82 /* Core 1 TX MX B/G TRIM */
|
|
#define B2055_C1_TX_RF_RCAL 0x83 /* Core 1 TX RF RCAL */
|
|
#define B2055_C1_TX_RF_PADTSSI1 0x84 /* Core 1 TX RF PAD TSSI1 */
|
|
#define B2055_C1_TX_RF_PADTSSI2 0x85 /* Core 1 TX RF PAD TSSI2 */
|
|
#define B2055_C1_TX_RF_SPARE 0x86 /* Core 1 TX RF spare */
|
|
#define B2055_C1_TX_RF_IQCAL1 0x87 /* Core 1 TX RF I/Q CAL 1 */
|
|
#define B2055_C1_TX_RF_IQCAL2 0x88 /* Core 1 TX RF I/Q CAL 2 */
|
|
#define B2055_C1_TXBB_RCCAL 0x89 /* Core 1 TXBB RC CAL Control */
|
|
#define B2055_C1_TXBB_LPF1 0x8A /* Core 1 TXBB LPF 1 */
|
|
#define B2055_C1_TX_VOSCNCL 0x8B /* Core 1 TX VOS CNCL */
|
|
#define B2055_C1_TX_LPF_MXGMIDAC 0x8C /* Core 1 TX LPF MXGM IDAC */
|
|
#define B2055_C1_TX_BB_MXGM 0x8D /* Core 1 TX BB MXGM */
|
|
#define B2055_C2_LGBUF_ATUNE 0x8E /* Core 2 LGBUF A tune */
|
|
#define B2055_C2_LGBUF_GTUNE 0x8F /* Core 2 LGBUF G tune */
|
|
#define B2055_C2_LGBUF_DIV 0x90 /* Core 2 LGBUF div */
|
|
#define B2055_C2_LGBUF_AIDAC 0x91 /* Core 2 LGBUF A IDAC */
|
|
#define B2055_C2_LGBUF_GIDAC 0x92 /* Core 2 LGBUF G IDAC */
|
|
#define B2055_C2_LGBUF_IDACFO 0x93 /* Core 2 LGBUF IDAC filter override */
|
|
#define B2055_C2_LGBUF_SPARE 0x94 /* Core 2 LGBUF spare */
|
|
#define B2055_C2_RX_RFSPC1 0x95 /* Core 2 RX RF SPC1 */
|
|
#define B2055_C2_RX_RFR1 0x96 /* Core 2 RX RF reg 1 */
|
|
#define B2055_C2_RX_RFR2 0x97 /* Core 2 RX RF reg 2 */
|
|
#define B2055_C2_RX_RFRCAL 0x98 /* Core 2 RX RF RCAL */
|
|
#define B2055_C2_RX_BB_BLCMP 0x99 /* Core 2 RX Baseband BUFI LPF CMP */
|
|
#define B2055_C2_RX_BB_LPF 0x9A /* Core 2 RX Baseband LPF */
|
|
#define B2055_C2_RX_BB_MIDACHP 0x9B /* Core 2 RX Baseband MIDAC High-pass */
|
|
#define B2055_C2_RX_BB_VGA1IDAC 0x9C /* Core 2 RX Baseband VGA1 IDAC */
|
|
#define B2055_C2_RX_BB_VGA2IDAC 0x9D /* Core 2 RX Baseband VGA2 IDAC */
|
|
#define B2055_C2_RX_BB_VGA3IDAC 0x9E /* Core 2 RX Baseband VGA3 IDAC */
|
|
#define B2055_C2_RX_BB_BUFOCTL 0x9F /* Core 2 RX Baseband BUFO Control */
|
|
#define B2055_C2_RX_BB_RCCALCTL 0xA0 /* Core 2 RX Baseband RCCAL Control */
|
|
#define B2055_C2_RX_BB_RSSICTL1 0xA1 /* Core 2 RX Baseband RSSI Control 1 */
|
|
#define B2055_C2_RX_BB_RSSICTL2 0xA2 /* Core 2 RX Baseband RSSI Control 2 */
|
|
#define B2055_C2_RX_BB_RSSICTL3 0xA3 /* Core 2 RX Baseband RSSI Control 3 */
|
|
#define B2055_C2_RX_BB_RSSICTL4 0xA4 /* Core 2 RX Baseband RSSI Control 4 */
|
|
#define B2055_C2_RX_BB_RSSICTL5 0xA5 /* Core 2 RX Baseband RSSI Control 5 */
|
|
#define B2055_C2_RX_BB_REG 0xA6 /* Core 2 RX Baseband Regulator */
|
|
#define B2055_C2_RX_BB_SPARE1 0xA7 /* Core 2 RX Baseband spare 1 */
|
|
#define B2055_C2_RX_TXBBRCAL 0xA8 /* Core 2 RX TX BB RCAL */
|
|
#define B2055_C2_TX_RF_SPGA 0xA9 /* Core 2 TX RF SGM PGA */
|
|
#define B2055_C2_TX_RF_SPAD 0xAA /* Core 2 TX RF SGM PAD */
|
|
#define B2055_C2_TX_RF_CNTPGA1 0xAB /* Core 2 TX RF counter PGA 1 */
|
|
#define B2055_C2_TX_RF_CNTPAD1 0xAC /* Core 2 TX RF counter PAD 1 */
|
|
#define B2055_C2_TX_RF_PGAIDAC 0xAD /* Core 2 TX RF PGA IDAC */
|
|
#define B2055_C2_TX_PGAPADTN 0xAE /* Core 2 TX PGA PAD TN */
|
|
#define B2055_C2_TX_PADIDAC1 0xAF /* Core 2 TX PAD IDAC 1 */
|
|
#define B2055_C2_TX_PADIDAC2 0xB0 /* Core 2 TX PAD IDAC 2 */
|
|
#define B2055_C2_TX_MXBGTRIM 0xB1 /* Core 2 TX MX B/G TRIM */
|
|
#define B2055_C2_TX_RF_RCAL 0xB2 /* Core 2 TX RF RCAL */
|
|
#define B2055_C2_TX_RF_PADTSSI1 0xB3 /* Core 2 TX RF PAD TSSI1 */
|
|
#define B2055_C2_TX_RF_PADTSSI2 0xB4 /* Core 2 TX RF PAD TSSI2 */
|
|
#define B2055_C2_TX_RF_SPARE 0xB5 /* Core 2 TX RF spare */
|
|
#define B2055_C2_TX_RF_IQCAL1 0xB6 /* Core 2 TX RF I/Q CAL 1 */
|
|
#define B2055_C2_TX_RF_IQCAL2 0xB7 /* Core 2 TX RF I/Q CAL 2 */
|
|
#define B2055_C2_TXBB_RCCAL 0xB8 /* Core 2 TXBB RC CAL Control */
|
|
#define B2055_C2_TXBB_LPF1 0xB9 /* Core 2 TXBB LPF 1 */
|
|
#define B2055_C2_TX_VOSCNCL 0xBA /* Core 2 TX VOS CNCL */
|
|
#define B2055_C2_TX_LPF_MXGMIDAC 0xBB /* Core 2 TX LPF MXGM IDAC */
|
|
#define B2055_C2_TX_BB_MXGM 0xBC /* Core 2 TX BB MXGM */
|
|
#define B2055_PRG_GCHP21 0xBD /* PRG GC HPVGA23 21 */
|
|
#define B2055_PRG_GCHP22 0xBE /* PRG GC HPVGA23 22 */
|
|
#define B2055_PRG_GCHP23 0xBF /* PRG GC HPVGA23 23 */
|
|
#define B2055_PRG_GCHP24 0xC0 /* PRG GC HPVGA23 24 */
|
|
#define B2055_PRG_GCHP25 0xC1 /* PRG GC HPVGA23 25 */
|
|
#define B2055_PRG_GCHP26 0xC2 /* PRG GC HPVGA23 26 */
|
|
#define B2055_PRG_GCHP27 0xC3 /* PRG GC HPVGA23 27 */
|
|
#define B2055_PRG_GCHP28 0xC4 /* PRG GC HPVGA23 28 */
|
|
#define B2055_PRG_GCHP29 0xC5 /* PRG GC HPVGA23 29 */
|
|
#define B2055_PRG_GCHP30 0xC6 /* PRG GC HPVGA23 30 */
|
|
#define B2055_C1_LNA_GAINBST 0xCD /* Core 1 LNA GAINBST */
|
|
#define B2055_C1_B0NB_RSSIVCM 0xD2 /* Core 1 B0 narrow-band RSSI VCM */
|
|
#define B2055_C1_GENSPARE2 0xD6 /* Core 1 GEN spare 2 */
|
|
#define B2055_C2_LNA_GAINBST 0xD9 /* Core 2 LNA GAINBST */
|
|
#define B2055_C2_B0NB_RSSIVCM 0xDE /* Core 2 B0 narrow-band RSSI VCM */
|
|
#define B2055_C2_GENSPARE2 0xE2 /* Core 2 GEN spare 2 */
|
|
|
|
struct b43_nphy_channeltab_entry_rev2 {
|
|
/* The channel number */
|
|
u8 channel;
|
|
/* The channel frequency in MHz */
|
|
u16 freq;
|
|
/* An unknown value */
|
|
u16 unk2;
|
|
/* Radio register values on channelswitch */
|
|
u8 radio_pll_ref;
|
|
u8 radio_rf_pllmod0;
|
|
u8 radio_rf_pllmod1;
|
|
u8 radio_vco_captail;
|
|
u8 radio_vco_cal1;
|
|
u8 radio_vco_cal2;
|
|
u8 radio_pll_lfc1;
|
|
u8 radio_pll_lfr1;
|
|
u8 radio_pll_lfc2;
|
|
u8 radio_lgbuf_cenbuf;
|
|
u8 radio_lgen_tune1;
|
|
u8 radio_lgen_tune2;
|
|
u8 radio_c1_lgbuf_atune;
|
|
u8 radio_c1_lgbuf_gtune;
|
|
u8 radio_c1_rx_rfr1;
|
|
u8 radio_c1_tx_pgapadtn;
|
|
u8 radio_c1_tx_mxbgtrim;
|
|
u8 radio_c2_lgbuf_atune;
|
|
u8 radio_c2_lgbuf_gtune;
|
|
u8 radio_c2_rx_rfr1;
|
|
u8 radio_c2_tx_pgapadtn;
|
|
u8 radio_c2_tx_mxbgtrim;
|
|
/* PHY register values on channelswitch */
|
|
struct b43_phy_n_sfo_cfg phy_regs;
|
|
};
|
|
|
|
/* Upload the default register value table.
|
|
* If "ghz5" is true, we upload the 5Ghz table. Otherwise the 2.4Ghz
|
|
* table is uploaded. If "ignore_uploadflag" is true, we upload any value
|
|
* and ignore the "UPLOAD" flag. */
|
|
void b2055_upload_inittab(struct b43_wldev *dev,
|
|
bool ghz5, bool ignore_uploadflag);
|
|
|
|
/* Get the NPHY Channel Switch Table entry for a channel.
|
|
* Returns NULL on failure to find an entry. */
|
|
const struct b43_nphy_channeltab_entry_rev2 *
|
|
b43_nphy_get_chantabent_rev2(struct b43_wldev *dev, u8 channel);
|
|
|
|
#endif /* B43_RADIO_2055_H_ */
|