1310 lines
34 KiB
C
1310 lines
34 KiB
C
/*
|
|
* Xilinx SystemACE device driver
|
|
*
|
|
* Copyright 2007 Secret Lab Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* The SystemACE chip is designed to configure FPGAs by loading an FPGA
|
|
* bitstream from a file on a CF card and squirting it into FPGAs connected
|
|
* to the SystemACE JTAG chain. It also has the advantage of providing an
|
|
* MPU interface which can be used to control the FPGA configuration process
|
|
* and to use the attached CF card for general purpose storage.
|
|
*
|
|
* This driver is a block device driver for the SystemACE.
|
|
*
|
|
* Initialization:
|
|
* The driver registers itself as a platform_device driver at module
|
|
* load time. The platform bus will take care of calling the
|
|
* ace_probe() method for all SystemACE instances in the system. Any
|
|
* number of SystemACE instances are supported. ace_probe() calls
|
|
* ace_setup() which initialized all data structures, reads the CF
|
|
* id structure and registers the device.
|
|
*
|
|
* Processing:
|
|
* Just about all of the heavy lifting in this driver is performed by
|
|
* a Finite State Machine (FSM). The driver needs to wait on a number
|
|
* of events; some raised by interrupts, some which need to be polled
|
|
* for. Describing all of the behaviour in a FSM seems to be the
|
|
* easiest way to keep the complexity low and make it easy to
|
|
* understand what the driver is doing. If the block ops or the
|
|
* request function need to interact with the hardware, then they
|
|
* simply need to flag the request and kick of FSM processing.
|
|
*
|
|
* The FSM itself is atomic-safe code which can be run from any
|
|
* context. The general process flow is:
|
|
* 1. obtain the ace->lock spinlock.
|
|
* 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is
|
|
* cleared.
|
|
* 3. release the lock.
|
|
*
|
|
* Individual states do not sleep in any way. If a condition needs to
|
|
* be waited for then the state much clear the fsm_continue flag and
|
|
* either schedule the FSM to be run again at a later time, or expect
|
|
* an interrupt to call the FSM when the desired condition is met.
|
|
*
|
|
* In normal operation, the FSM is processed at interrupt context
|
|
* either when the driver's tasklet is scheduled, or when an irq is
|
|
* raised by the hardware. The tasklet can be scheduled at any time.
|
|
* The request method in particular schedules the tasklet when a new
|
|
* request has been indicated by the block layer. Once started, the
|
|
* FSM proceeds as far as it can processing the request until it
|
|
* needs on a hardware event. At this point, it must yield execution.
|
|
*
|
|
* A state has two options when yielding execution:
|
|
* 1. ace_fsm_yield()
|
|
* - Call if need to poll for event.
|
|
* - clears the fsm_continue flag to exit the processing loop
|
|
* - reschedules the tasklet to run again as soon as possible
|
|
* 2. ace_fsm_yieldirq()
|
|
* - Call if an irq is expected from the HW
|
|
* - clears the fsm_continue flag to exit the processing loop
|
|
* - does not reschedule the tasklet so the FSM will not be processed
|
|
* again until an irq is received.
|
|
* After calling a yield function, the state must return control back
|
|
* to the FSM main loop.
|
|
*
|
|
* Additionally, the driver maintains a kernel timer which can process
|
|
* the FSM. If the FSM gets stalled, typically due to a missed
|
|
* interrupt, then the kernel timer will expire and the driver can
|
|
* continue where it left off.
|
|
*
|
|
* To Do:
|
|
* - Add FPGA configuration control interface.
|
|
* - Request major number from lanana
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/platform_device.h>
|
|
#if defined(CONFIG_OF)
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_platform.h>
|
|
#endif
|
|
|
|
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
|
|
MODULE_DESCRIPTION("Xilinx SystemACE device driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* SystemACE register definitions */
|
|
#define ACE_BUSMODE (0x00)
|
|
|
|
#define ACE_STATUS (0x04)
|
|
#define ACE_STATUS_CFGLOCK (0x00000001)
|
|
#define ACE_STATUS_MPULOCK (0x00000002)
|
|
#define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */
|
|
#define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */
|
|
#define ACE_STATUS_CFDETECT (0x00000010)
|
|
#define ACE_STATUS_DATABUFRDY (0x00000020)
|
|
#define ACE_STATUS_DATABUFMODE (0x00000040)
|
|
#define ACE_STATUS_CFGDONE (0x00000080)
|
|
#define ACE_STATUS_RDYFORCFCMD (0x00000100)
|
|
#define ACE_STATUS_CFGMODEPIN (0x00000200)
|
|
#define ACE_STATUS_CFGADDR_MASK (0x0000e000)
|
|
#define ACE_STATUS_CFBSY (0x00020000)
|
|
#define ACE_STATUS_CFRDY (0x00040000)
|
|
#define ACE_STATUS_CFDWF (0x00080000)
|
|
#define ACE_STATUS_CFDSC (0x00100000)
|
|
#define ACE_STATUS_CFDRQ (0x00200000)
|
|
#define ACE_STATUS_CFCORR (0x00400000)
|
|
#define ACE_STATUS_CFERR (0x00800000)
|
|
|
|
#define ACE_ERROR (0x08)
|
|
#define ACE_CFGLBA (0x0c)
|
|
#define ACE_MPULBA (0x10)
|
|
|
|
#define ACE_SECCNTCMD (0x14)
|
|
#define ACE_SECCNTCMD_RESET (0x0100)
|
|
#define ACE_SECCNTCMD_IDENTIFY (0x0200)
|
|
#define ACE_SECCNTCMD_READ_DATA (0x0300)
|
|
#define ACE_SECCNTCMD_WRITE_DATA (0x0400)
|
|
#define ACE_SECCNTCMD_ABORT (0x0600)
|
|
|
|
#define ACE_VERSION (0x16)
|
|
#define ACE_VERSION_REVISION_MASK (0x00FF)
|
|
#define ACE_VERSION_MINOR_MASK (0x0F00)
|
|
#define ACE_VERSION_MAJOR_MASK (0xF000)
|
|
|
|
#define ACE_CTRL (0x18)
|
|
#define ACE_CTRL_FORCELOCKREQ (0x0001)
|
|
#define ACE_CTRL_LOCKREQ (0x0002)
|
|
#define ACE_CTRL_FORCECFGADDR (0x0004)
|
|
#define ACE_CTRL_FORCECFGMODE (0x0008)
|
|
#define ACE_CTRL_CFGMODE (0x0010)
|
|
#define ACE_CTRL_CFGSTART (0x0020)
|
|
#define ACE_CTRL_CFGSEL (0x0040)
|
|
#define ACE_CTRL_CFGRESET (0x0080)
|
|
#define ACE_CTRL_DATABUFRDYIRQ (0x0100)
|
|
#define ACE_CTRL_ERRORIRQ (0x0200)
|
|
#define ACE_CTRL_CFGDONEIRQ (0x0400)
|
|
#define ACE_CTRL_RESETIRQ (0x0800)
|
|
#define ACE_CTRL_CFGPROG (0x1000)
|
|
#define ACE_CTRL_CFGADDR_MASK (0xe000)
|
|
|
|
#define ACE_FATSTAT (0x1c)
|
|
|
|
#define ACE_NUM_MINORS 16
|
|
#define ACE_SECTOR_SIZE (512)
|
|
#define ACE_FIFO_SIZE (32)
|
|
#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE)
|
|
|
|
#define ACE_BUS_WIDTH_8 0
|
|
#define ACE_BUS_WIDTH_16 1
|
|
|
|
struct ace_reg_ops;
|
|
|
|
struct ace_device {
|
|
/* driver state data */
|
|
int id;
|
|
int media_change;
|
|
int users;
|
|
struct list_head list;
|
|
|
|
/* finite state machine data */
|
|
struct tasklet_struct fsm_tasklet;
|
|
uint fsm_task; /* Current activity (ACE_TASK_*) */
|
|
uint fsm_state; /* Current state (ACE_FSM_STATE_*) */
|
|
uint fsm_continue_flag; /* cleared to exit FSM mainloop */
|
|
uint fsm_iter_num;
|
|
struct timer_list stall_timer;
|
|
|
|
/* Transfer state/result, use for both id and block request */
|
|
struct request *req; /* request being processed */
|
|
void *data_ptr; /* pointer to I/O buffer */
|
|
int data_count; /* number of buffers remaining */
|
|
int data_result; /* Result of transfer; 0 := success */
|
|
|
|
int id_req_count; /* count of id requests */
|
|
int id_result;
|
|
struct completion id_completion; /* used when id req finishes */
|
|
int in_irq;
|
|
|
|
/* Details of hardware device */
|
|
resource_size_t physaddr;
|
|
void __iomem *baseaddr;
|
|
int irq;
|
|
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
|
|
struct ace_reg_ops *reg_ops;
|
|
int lock_count;
|
|
|
|
/* Block device data structures */
|
|
spinlock_t lock;
|
|
struct device *dev;
|
|
struct request_queue *queue;
|
|
struct gendisk *gd;
|
|
|
|
/* Inserted CF card parameters */
|
|
u16 cf_id[ATA_ID_WORDS];
|
|
};
|
|
|
|
static int ace_major;
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Low level register access
|
|
*/
|
|
|
|
struct ace_reg_ops {
|
|
u16(*in) (struct ace_device * ace, int reg);
|
|
void (*out) (struct ace_device * ace, int reg, u16 val);
|
|
void (*datain) (struct ace_device * ace);
|
|
void (*dataout) (struct ace_device * ace);
|
|
};
|
|
|
|
/* 8 Bit bus width */
|
|
static u16 ace_in_8(struct ace_device *ace, int reg)
|
|
{
|
|
void __iomem *r = ace->baseaddr + reg;
|
|
return in_8(r) | (in_8(r + 1) << 8);
|
|
}
|
|
|
|
static void ace_out_8(struct ace_device *ace, int reg, u16 val)
|
|
{
|
|
void __iomem *r = ace->baseaddr + reg;
|
|
out_8(r, val);
|
|
out_8(r + 1, val >> 8);
|
|
}
|
|
|
|
static void ace_datain_8(struct ace_device *ace)
|
|
{
|
|
void __iomem *r = ace->baseaddr + 0x40;
|
|
u8 *dst = ace->data_ptr;
|
|
int i = ACE_FIFO_SIZE;
|
|
while (i--)
|
|
*dst++ = in_8(r++);
|
|
ace->data_ptr = dst;
|
|
}
|
|
|
|
static void ace_dataout_8(struct ace_device *ace)
|
|
{
|
|
void __iomem *r = ace->baseaddr + 0x40;
|
|
u8 *src = ace->data_ptr;
|
|
int i = ACE_FIFO_SIZE;
|
|
while (i--)
|
|
out_8(r++, *src++);
|
|
ace->data_ptr = src;
|
|
}
|
|
|
|
static struct ace_reg_ops ace_reg_8_ops = {
|
|
.in = ace_in_8,
|
|
.out = ace_out_8,
|
|
.datain = ace_datain_8,
|
|
.dataout = ace_dataout_8,
|
|
};
|
|
|
|
/* 16 bit big endian bus attachment */
|
|
static u16 ace_in_be16(struct ace_device *ace, int reg)
|
|
{
|
|
return in_be16(ace->baseaddr + reg);
|
|
}
|
|
|
|
static void ace_out_be16(struct ace_device *ace, int reg, u16 val)
|
|
{
|
|
out_be16(ace->baseaddr + reg, val);
|
|
}
|
|
|
|
static void ace_datain_be16(struct ace_device *ace)
|
|
{
|
|
int i = ACE_FIFO_SIZE / 2;
|
|
u16 *dst = ace->data_ptr;
|
|
while (i--)
|
|
*dst++ = in_le16(ace->baseaddr + 0x40);
|
|
ace->data_ptr = dst;
|
|
}
|
|
|
|
static void ace_dataout_be16(struct ace_device *ace)
|
|
{
|
|
int i = ACE_FIFO_SIZE / 2;
|
|
u16 *src = ace->data_ptr;
|
|
while (i--)
|
|
out_le16(ace->baseaddr + 0x40, *src++);
|
|
ace->data_ptr = src;
|
|
}
|
|
|
|
/* 16 bit little endian bus attachment */
|
|
static u16 ace_in_le16(struct ace_device *ace, int reg)
|
|
{
|
|
return in_le16(ace->baseaddr + reg);
|
|
}
|
|
|
|
static void ace_out_le16(struct ace_device *ace, int reg, u16 val)
|
|
{
|
|
out_le16(ace->baseaddr + reg, val);
|
|
}
|
|
|
|
static void ace_datain_le16(struct ace_device *ace)
|
|
{
|
|
int i = ACE_FIFO_SIZE / 2;
|
|
u16 *dst = ace->data_ptr;
|
|
while (i--)
|
|
*dst++ = in_be16(ace->baseaddr + 0x40);
|
|
ace->data_ptr = dst;
|
|
}
|
|
|
|
static void ace_dataout_le16(struct ace_device *ace)
|
|
{
|
|
int i = ACE_FIFO_SIZE / 2;
|
|
u16 *src = ace->data_ptr;
|
|
while (i--)
|
|
out_be16(ace->baseaddr + 0x40, *src++);
|
|
ace->data_ptr = src;
|
|
}
|
|
|
|
static struct ace_reg_ops ace_reg_be16_ops = {
|
|
.in = ace_in_be16,
|
|
.out = ace_out_be16,
|
|
.datain = ace_datain_be16,
|
|
.dataout = ace_dataout_be16,
|
|
};
|
|
|
|
static struct ace_reg_ops ace_reg_le16_ops = {
|
|
.in = ace_in_le16,
|
|
.out = ace_out_le16,
|
|
.datain = ace_datain_le16,
|
|
.dataout = ace_dataout_le16,
|
|
};
|
|
|
|
static inline u16 ace_in(struct ace_device *ace, int reg)
|
|
{
|
|
return ace->reg_ops->in(ace, reg);
|
|
}
|
|
|
|
static inline u32 ace_in32(struct ace_device *ace, int reg)
|
|
{
|
|
return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16);
|
|
}
|
|
|
|
static inline void ace_out(struct ace_device *ace, int reg, u16 val)
|
|
{
|
|
ace->reg_ops->out(ace, reg, val);
|
|
}
|
|
|
|
static inline void ace_out32(struct ace_device *ace, int reg, u32 val)
|
|
{
|
|
ace_out(ace, reg, val);
|
|
ace_out(ace, reg + 2, val >> 16);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Debug support functions
|
|
*/
|
|
|
|
#if defined(DEBUG)
|
|
static void ace_dump_mem(void *base, int len)
|
|
{
|
|
const char *ptr = base;
|
|
int i, j;
|
|
|
|
for (i = 0; i < len; i += 16) {
|
|
printk(KERN_INFO "%.8x:", i);
|
|
for (j = 0; j < 16; j++) {
|
|
if (!(j % 4))
|
|
printk(" ");
|
|
printk("%.2x", ptr[i + j]);
|
|
}
|
|
printk(" ");
|
|
for (j = 0; j < 16; j++)
|
|
printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.');
|
|
printk("\n");
|
|
}
|
|
}
|
|
#else
|
|
static inline void ace_dump_mem(void *base, int len)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static void ace_dump_regs(struct ace_device *ace)
|
|
{
|
|
dev_info(ace->dev,
|
|
" ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
|
|
" status:%.8x mpu_lba:%.8x busmode:%4x\n"
|
|
" error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
|
|
ace_in32(ace, ACE_CTRL),
|
|
ace_in(ace, ACE_SECCNTCMD),
|
|
ace_in(ace, ACE_VERSION),
|
|
ace_in32(ace, ACE_STATUS),
|
|
ace_in32(ace, ACE_MPULBA),
|
|
ace_in(ace, ACE_BUSMODE),
|
|
ace_in32(ace, ACE_ERROR),
|
|
ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT));
|
|
}
|
|
|
|
void ace_fix_driveid(u16 *id)
|
|
{
|
|
#if defined(__BIG_ENDIAN)
|
|
int i;
|
|
|
|
/* All half words have wrong byte order; swap the bytes */
|
|
for (i = 0; i < ATA_ID_WORDS; i++, id++)
|
|
*id = le16_to_cpu(*id);
|
|
#endif
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Finite State Machine (FSM) implementation
|
|
*/
|
|
|
|
/* FSM tasks; used to direct state transitions */
|
|
#define ACE_TASK_IDLE 0
|
|
#define ACE_TASK_IDENTIFY 1
|
|
#define ACE_TASK_READ 2
|
|
#define ACE_TASK_WRITE 3
|
|
#define ACE_FSM_NUM_TASKS 4
|
|
|
|
/* FSM state definitions */
|
|
#define ACE_FSM_STATE_IDLE 0
|
|
#define ACE_FSM_STATE_REQ_LOCK 1
|
|
#define ACE_FSM_STATE_WAIT_LOCK 2
|
|
#define ACE_FSM_STATE_WAIT_CFREADY 3
|
|
#define ACE_FSM_STATE_IDENTIFY_PREPARE 4
|
|
#define ACE_FSM_STATE_IDENTIFY_TRANSFER 5
|
|
#define ACE_FSM_STATE_IDENTIFY_COMPLETE 6
|
|
#define ACE_FSM_STATE_REQ_PREPARE 7
|
|
#define ACE_FSM_STATE_REQ_TRANSFER 8
|
|
#define ACE_FSM_STATE_REQ_COMPLETE 9
|
|
#define ACE_FSM_STATE_ERROR 10
|
|
#define ACE_FSM_NUM_STATES 11
|
|
|
|
/* Set flag to exit FSM loop and reschedule tasklet */
|
|
static inline void ace_fsm_yield(struct ace_device *ace)
|
|
{
|
|
dev_dbg(ace->dev, "ace_fsm_yield()\n");
|
|
tasklet_schedule(&ace->fsm_tasklet);
|
|
ace->fsm_continue_flag = 0;
|
|
}
|
|
|
|
/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */
|
|
static inline void ace_fsm_yieldirq(struct ace_device *ace)
|
|
{
|
|
dev_dbg(ace->dev, "ace_fsm_yieldirq()\n");
|
|
|
|
if (ace->irq == NO_IRQ)
|
|
/* No IRQ assigned, so need to poll */
|
|
tasklet_schedule(&ace->fsm_tasklet);
|
|
ace->fsm_continue_flag = 0;
|
|
}
|
|
|
|
/* Get the next read/write request; ending requests that we don't handle */
|
|
struct request *ace_get_next_request(struct request_queue * q)
|
|
{
|
|
struct request *req;
|
|
|
|
while ((req = blk_peek_request(q)) != NULL) {
|
|
if (blk_fs_request(req))
|
|
break;
|
|
blk_start_request(req);
|
|
__blk_end_request_all(req, -EIO);
|
|
}
|
|
return req;
|
|
}
|
|
|
|
static void ace_fsm_dostate(struct ace_device *ace)
|
|
{
|
|
struct request *req;
|
|
u32 status;
|
|
u16 val;
|
|
int count;
|
|
|
|
#if defined(DEBUG)
|
|
dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
|
|
ace->fsm_state, ace->id_req_count);
|
|
#endif
|
|
|
|
/* Verify that there is actually a CF in the slot. If not, then
|
|
* bail out back to the idle state and wake up all the waiters */
|
|
status = ace_in32(ace, ACE_STATUS);
|
|
if ((status & ACE_STATUS_CFDETECT) == 0) {
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
ace->media_change = 1;
|
|
set_capacity(ace->gd, 0);
|
|
dev_info(ace->dev, "No CF in slot\n");
|
|
|
|
/* Drop all in-flight and pending requests */
|
|
if (ace->req) {
|
|
__blk_end_request_all(ace->req, -EIO);
|
|
ace->req = NULL;
|
|
}
|
|
while ((req = blk_fetch_request(ace->queue)) != NULL)
|
|
__blk_end_request_all(req, -EIO);
|
|
|
|
/* Drop back to IDLE state and notify waiters */
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
ace->id_result = -EIO;
|
|
while (ace->id_req_count) {
|
|
complete(&ace->id_completion);
|
|
ace->id_req_count--;
|
|
}
|
|
}
|
|
|
|
switch (ace->fsm_state) {
|
|
case ACE_FSM_STATE_IDLE:
|
|
/* See if there is anything to do */
|
|
if (ace->id_req_count || ace_get_next_request(ace->queue)) {
|
|
ace->fsm_iter_num++;
|
|
ace->fsm_state = ACE_FSM_STATE_REQ_LOCK;
|
|
mod_timer(&ace->stall_timer, jiffies + HZ);
|
|
if (!timer_pending(&ace->stall_timer))
|
|
add_timer(&ace->stall_timer);
|
|
break;
|
|
}
|
|
del_timer(&ace->stall_timer);
|
|
ace->fsm_continue_flag = 0;
|
|
break;
|
|
|
|
case ACE_FSM_STATE_REQ_LOCK:
|
|
if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
|
|
/* Already have the lock, jump to next state */
|
|
ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
|
|
break;
|
|
}
|
|
|
|
/* Request the lock */
|
|
val = ace_in(ace, ACE_CTRL);
|
|
ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ);
|
|
ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK;
|
|
break;
|
|
|
|
case ACE_FSM_STATE_WAIT_LOCK:
|
|
if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
|
|
/* got the lock; move to next state */
|
|
ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
|
|
break;
|
|
}
|
|
|
|
/* wait a bit for the lock */
|
|
ace_fsm_yield(ace);
|
|
break;
|
|
|
|
case ACE_FSM_STATE_WAIT_CFREADY:
|
|
status = ace_in32(ace, ACE_STATUS);
|
|
if (!(status & ACE_STATUS_RDYFORCFCMD) ||
|
|
(status & ACE_STATUS_CFBSY)) {
|
|
/* CF card isn't ready; it needs to be polled */
|
|
ace_fsm_yield(ace);
|
|
break;
|
|
}
|
|
|
|
/* Device is ready for command; determine what to do next */
|
|
if (ace->id_req_count)
|
|
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE;
|
|
else
|
|
ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE;
|
|
break;
|
|
|
|
case ACE_FSM_STATE_IDENTIFY_PREPARE:
|
|
/* Send identify command */
|
|
ace->fsm_task = ACE_TASK_IDENTIFY;
|
|
ace->data_ptr = ace->cf_id;
|
|
ace->data_count = ACE_BUF_PER_SECTOR;
|
|
ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);
|
|
|
|
/* As per datasheet, put config controller in reset */
|
|
val = ace_in(ace, ACE_CTRL);
|
|
ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
|
|
|
|
/* irq handler takes over from this point; wait for the
|
|
* transfer to complete */
|
|
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER;
|
|
ace_fsm_yieldirq(ace);
|
|
break;
|
|
|
|
case ACE_FSM_STATE_IDENTIFY_TRANSFER:
|
|
/* Check that the sysace is ready to receive data */
|
|
status = ace_in32(ace, ACE_STATUS);
|
|
if (status & ACE_STATUS_CFBSY) {
|
|
dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n",
|
|
ace->fsm_task, ace->fsm_iter_num,
|
|
ace->data_count);
|
|
ace_fsm_yield(ace);
|
|
break;
|
|
}
|
|
if (!(status & ACE_STATUS_DATABUFRDY)) {
|
|
ace_fsm_yield(ace);
|
|
break;
|
|
}
|
|
|
|
/* Transfer the next buffer */
|
|
ace->reg_ops->datain(ace);
|
|
ace->data_count--;
|
|
|
|
/* If there are still buffers to be transfers; jump out here */
|
|
if (ace->data_count != 0) {
|
|
ace_fsm_yieldirq(ace);
|
|
break;
|
|
}
|
|
|
|
/* transfer finished; kick state machine */
|
|
dev_dbg(ace->dev, "identify finished\n");
|
|
ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE;
|
|
break;
|
|
|
|
case ACE_FSM_STATE_IDENTIFY_COMPLETE:
|
|
ace_fix_driveid(ace->cf_id);
|
|
ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */
|
|
|
|
if (ace->data_result) {
|
|
/* Error occured, disable the disk */
|
|
ace->media_change = 1;
|
|
set_capacity(ace->gd, 0);
|
|
dev_err(ace->dev, "error fetching CF id (%i)\n",
|
|
ace->data_result);
|
|
} else {
|
|
ace->media_change = 0;
|
|
|
|
/* Record disk parameters */
|
|
set_capacity(ace->gd,
|
|
ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
|
|
dev_info(ace->dev, "capacity: %i sectors\n",
|
|
ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
|
|
}
|
|
|
|
/* We're done, drop to IDLE state and notify waiters */
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
ace->id_result = ace->data_result;
|
|
while (ace->id_req_count) {
|
|
complete(&ace->id_completion);
|
|
ace->id_req_count--;
|
|
}
|
|
break;
|
|
|
|
case ACE_FSM_STATE_REQ_PREPARE:
|
|
req = ace_get_next_request(ace->queue);
|
|
if (!req) {
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
break;
|
|
}
|
|
blk_start_request(req);
|
|
|
|
/* Okay, it's a data request, set it up for transfer */
|
|
dev_dbg(ace->dev,
|
|
"request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
|
|
(unsigned long long)blk_rq_pos(req),
|
|
blk_rq_sectors(req), blk_rq_cur_sectors(req),
|
|
rq_data_dir(req));
|
|
|
|
ace->req = req;
|
|
ace->data_ptr = req->buffer;
|
|
ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
|
|
ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
|
|
|
|
count = blk_rq_sectors(req);
|
|
if (rq_data_dir(req)) {
|
|
/* Kick off write request */
|
|
dev_dbg(ace->dev, "write data\n");
|
|
ace->fsm_task = ACE_TASK_WRITE;
|
|
ace_out(ace, ACE_SECCNTCMD,
|
|
count | ACE_SECCNTCMD_WRITE_DATA);
|
|
} else {
|
|
/* Kick off read request */
|
|
dev_dbg(ace->dev, "read data\n");
|
|
ace->fsm_task = ACE_TASK_READ;
|
|
ace_out(ace, ACE_SECCNTCMD,
|
|
count | ACE_SECCNTCMD_READ_DATA);
|
|
}
|
|
|
|
/* As per datasheet, put config controller in reset */
|
|
val = ace_in(ace, ACE_CTRL);
|
|
ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
|
|
|
|
/* Move to the transfer state. The systemace will raise
|
|
* an interrupt once there is something to do
|
|
*/
|
|
ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER;
|
|
if (ace->fsm_task == ACE_TASK_READ)
|
|
ace_fsm_yieldirq(ace); /* wait for data ready */
|
|
break;
|
|
|
|
case ACE_FSM_STATE_REQ_TRANSFER:
|
|
/* Check that the sysace is ready to receive data */
|
|
status = ace_in32(ace, ACE_STATUS);
|
|
if (status & ACE_STATUS_CFBSY) {
|
|
dev_dbg(ace->dev,
|
|
"CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
|
|
ace->fsm_task, ace->fsm_iter_num,
|
|
blk_rq_cur_sectors(ace->req) * 16,
|
|
ace->data_count, ace->in_irq);
|
|
ace_fsm_yield(ace); /* need to poll CFBSY bit */
|
|
break;
|
|
}
|
|
if (!(status & ACE_STATUS_DATABUFRDY)) {
|
|
dev_dbg(ace->dev,
|
|
"DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
|
|
ace->fsm_task, ace->fsm_iter_num,
|
|
blk_rq_cur_sectors(ace->req) * 16,
|
|
ace->data_count, ace->in_irq);
|
|
ace_fsm_yieldirq(ace);
|
|
break;
|
|
}
|
|
|
|
/* Transfer the next buffer */
|
|
if (ace->fsm_task == ACE_TASK_WRITE)
|
|
ace->reg_ops->dataout(ace);
|
|
else
|
|
ace->reg_ops->datain(ace);
|
|
ace->data_count--;
|
|
|
|
/* If there are still buffers to be transfers; jump out here */
|
|
if (ace->data_count != 0) {
|
|
ace_fsm_yieldirq(ace);
|
|
break;
|
|
}
|
|
|
|
/* bio finished; is there another one? */
|
|
if (__blk_end_request_cur(ace->req, 0)) {
|
|
/* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
|
|
* blk_rq_sectors(ace->req),
|
|
* blk_rq_cur_sectors(ace->req));
|
|
*/
|
|
ace->data_ptr = ace->req->buffer;
|
|
ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
|
|
ace_fsm_yieldirq(ace);
|
|
break;
|
|
}
|
|
|
|
ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE;
|
|
break;
|
|
|
|
case ACE_FSM_STATE_REQ_COMPLETE:
|
|
ace->req = NULL;
|
|
|
|
/* Finished request; go to idle state */
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
break;
|
|
|
|
default:
|
|
ace->fsm_state = ACE_FSM_STATE_IDLE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ace_fsm_tasklet(unsigned long data)
|
|
{
|
|
struct ace_device *ace = (void *)data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ace->lock, flags);
|
|
|
|
/* Loop over state machine until told to stop */
|
|
ace->fsm_continue_flag = 1;
|
|
while (ace->fsm_continue_flag)
|
|
ace_fsm_dostate(ace);
|
|
|
|
spin_unlock_irqrestore(&ace->lock, flags);
|
|
}
|
|
|
|
static void ace_stall_timer(unsigned long data)
|
|
{
|
|
struct ace_device *ace = (void *)data;
|
|
unsigned long flags;
|
|
|
|
dev_warn(ace->dev,
|
|
"kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n",
|
|
ace->fsm_state, ace->fsm_task, ace->fsm_iter_num,
|
|
ace->data_count);
|
|
spin_lock_irqsave(&ace->lock, flags);
|
|
|
|
/* Rearm the stall timer *before* entering FSM (which may then
|
|
* delete the timer) */
|
|
mod_timer(&ace->stall_timer, jiffies + HZ);
|
|
|
|
/* Loop over state machine until told to stop */
|
|
ace->fsm_continue_flag = 1;
|
|
while (ace->fsm_continue_flag)
|
|
ace_fsm_dostate(ace);
|
|
|
|
spin_unlock_irqrestore(&ace->lock, flags);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Interrupt handling routines
|
|
*/
|
|
static int ace_interrupt_checkstate(struct ace_device *ace)
|
|
{
|
|
u32 sreg = ace_in32(ace, ACE_STATUS);
|
|
u16 creg = ace_in(ace, ACE_CTRL);
|
|
|
|
/* Check for error occurance */
|
|
if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
|
|
(creg & ACE_CTRL_ERRORIRQ)) {
|
|
dev_err(ace->dev, "transfer failure\n");
|
|
ace_dump_regs(ace);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t ace_interrupt(int irq, void *dev_id)
|
|
{
|
|
u16 creg;
|
|
struct ace_device *ace = dev_id;
|
|
|
|
/* be safe and get the lock */
|
|
spin_lock(&ace->lock);
|
|
ace->in_irq = 1;
|
|
|
|
/* clear the interrupt */
|
|
creg = ace_in(ace, ACE_CTRL);
|
|
ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ);
|
|
ace_out(ace, ACE_CTRL, creg);
|
|
|
|
/* check for IO failures */
|
|
if (ace_interrupt_checkstate(ace))
|
|
ace->data_result = -EIO;
|
|
|
|
if (ace->fsm_task == 0) {
|
|
dev_err(ace->dev,
|
|
"spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n",
|
|
ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL),
|
|
ace_in(ace, ACE_SECCNTCMD));
|
|
dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n",
|
|
ace->fsm_task, ace->fsm_state, ace->data_count);
|
|
}
|
|
|
|
/* Loop over state machine until told to stop */
|
|
ace->fsm_continue_flag = 1;
|
|
while (ace->fsm_continue_flag)
|
|
ace_fsm_dostate(ace);
|
|
|
|
/* done with interrupt; drop the lock */
|
|
ace->in_irq = 0;
|
|
spin_unlock(&ace->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Block ops
|
|
*/
|
|
static void ace_request(struct request_queue * q)
|
|
{
|
|
struct request *req;
|
|
struct ace_device *ace;
|
|
|
|
req = ace_get_next_request(q);
|
|
|
|
if (req) {
|
|
ace = req->rq_disk->private_data;
|
|
tasklet_schedule(&ace->fsm_tasklet);
|
|
}
|
|
}
|
|
|
|
static int ace_media_changed(struct gendisk *gd)
|
|
{
|
|
struct ace_device *ace = gd->private_data;
|
|
dev_dbg(ace->dev, "ace_media_changed(): %i\n", ace->media_change);
|
|
|
|
return ace->media_change;
|
|
}
|
|
|
|
static int ace_revalidate_disk(struct gendisk *gd)
|
|
{
|
|
struct ace_device *ace = gd->private_data;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(ace->dev, "ace_revalidate_disk()\n");
|
|
|
|
if (ace->media_change) {
|
|
dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n");
|
|
|
|
spin_lock_irqsave(&ace->lock, flags);
|
|
ace->id_req_count++;
|
|
spin_unlock_irqrestore(&ace->lock, flags);
|
|
|
|
tasklet_schedule(&ace->fsm_tasklet);
|
|
wait_for_completion(&ace->id_completion);
|
|
}
|
|
|
|
dev_dbg(ace->dev, "revalidate complete\n");
|
|
return ace->id_result;
|
|
}
|
|
|
|
static int ace_open(struct block_device *bdev, fmode_t mode)
|
|
{
|
|
struct ace_device *ace = bdev->bd_disk->private_data;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
|
|
|
|
spin_lock_irqsave(&ace->lock, flags);
|
|
ace->users++;
|
|
spin_unlock_irqrestore(&ace->lock, flags);
|
|
|
|
check_disk_change(bdev);
|
|
return 0;
|
|
}
|
|
|
|
static int ace_release(struct gendisk *disk, fmode_t mode)
|
|
{
|
|
struct ace_device *ace = disk->private_data;
|
|
unsigned long flags;
|
|
u16 val;
|
|
|
|
dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);
|
|
|
|
spin_lock_irqsave(&ace->lock, flags);
|
|
ace->users--;
|
|
if (ace->users == 0) {
|
|
val = ace_in(ace, ACE_CTRL);
|
|
ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
|
|
}
|
|
spin_unlock_irqrestore(&ace->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
{
|
|
struct ace_device *ace = bdev->bd_disk->private_data;
|
|
u16 *cf_id = ace->cf_id;
|
|
|
|
dev_dbg(ace->dev, "ace_getgeo()\n");
|
|
|
|
geo->heads = cf_id[ATA_ID_HEADS];
|
|
geo->sectors = cf_id[ATA_ID_SECTORS];
|
|
geo->cylinders = cf_id[ATA_ID_CYLS];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct block_device_operations ace_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = ace_open,
|
|
.release = ace_release,
|
|
.media_changed = ace_media_changed,
|
|
.revalidate_disk = ace_revalidate_disk,
|
|
.getgeo = ace_getgeo,
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SystemACE device setup/teardown code
|
|
*/
|
|
static int __devinit ace_setup(struct ace_device *ace)
|
|
{
|
|
u16 version;
|
|
u16 val;
|
|
int rc;
|
|
|
|
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
|
|
dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
|
|
(unsigned long long)ace->physaddr, ace->irq);
|
|
|
|
spin_lock_init(&ace->lock);
|
|
init_completion(&ace->id_completion);
|
|
|
|
/*
|
|
* Map the device
|
|
*/
|
|
ace->baseaddr = ioremap(ace->physaddr, 0x80);
|
|
if (!ace->baseaddr)
|
|
goto err_ioremap;
|
|
|
|
/*
|
|
* Initialize the state machine tasklet and stall timer
|
|
*/
|
|
tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace);
|
|
setup_timer(&ace->stall_timer, ace_stall_timer, (unsigned long)ace);
|
|
|
|
/*
|
|
* Initialize the request queue
|
|
*/
|
|
ace->queue = blk_init_queue(ace_request, &ace->lock);
|
|
if (ace->queue == NULL)
|
|
goto err_blk_initq;
|
|
blk_queue_logical_block_size(ace->queue, 512);
|
|
|
|
/*
|
|
* Allocate and initialize GD structure
|
|
*/
|
|
ace->gd = alloc_disk(ACE_NUM_MINORS);
|
|
if (!ace->gd)
|
|
goto err_alloc_disk;
|
|
|
|
ace->gd->major = ace_major;
|
|
ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
|
|
ace->gd->fops = &ace_fops;
|
|
ace->gd->queue = ace->queue;
|
|
ace->gd->private_data = ace;
|
|
snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
|
|
|
|
/* set bus width */
|
|
if (ace->bus_width == ACE_BUS_WIDTH_16) {
|
|
/* 0x0101 should work regardless of endianess */
|
|
ace_out_le16(ace, ACE_BUSMODE, 0x0101);
|
|
|
|
/* read it back to determine endianess */
|
|
if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001)
|
|
ace->reg_ops = &ace_reg_le16_ops;
|
|
else
|
|
ace->reg_ops = &ace_reg_be16_ops;
|
|
} else {
|
|
ace_out_8(ace, ACE_BUSMODE, 0x00);
|
|
ace->reg_ops = &ace_reg_8_ops;
|
|
}
|
|
|
|
/* Make sure version register is sane */
|
|
version = ace_in(ace, ACE_VERSION);
|
|
if ((version == 0) || (version == 0xFFFF))
|
|
goto err_read;
|
|
|
|
/* Put sysace in a sane state by clearing most control reg bits */
|
|
ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
|
|
ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
|
|
|
|
/* Now we can hook up the irq handler */
|
|
if (ace->irq != NO_IRQ) {
|
|
rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
|
|
if (rc) {
|
|
/* Failure - fall back to polled mode */
|
|
dev_err(ace->dev, "request_irq failed\n");
|
|
ace->irq = NO_IRQ;
|
|
}
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
val = ace_in(ace, ACE_CTRL);
|
|
val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
|
|
ace_out(ace, ACE_CTRL, val);
|
|
|
|
/* Print the identification */
|
|
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
|
|
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
|
|
dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
|
|
(unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
|
|
|
|
ace->media_change = 1;
|
|
ace_revalidate_disk(ace->gd);
|
|
|
|
/* Make the sysace device 'live' */
|
|
add_disk(ace->gd);
|
|
|
|
return 0;
|
|
|
|
err_read:
|
|
put_disk(ace->gd);
|
|
err_alloc_disk:
|
|
blk_cleanup_queue(ace->queue);
|
|
err_blk_initq:
|
|
iounmap(ace->baseaddr);
|
|
err_ioremap:
|
|
dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
|
|
(unsigned long long) ace->physaddr);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void __devexit ace_teardown(struct ace_device *ace)
|
|
{
|
|
if (ace->gd) {
|
|
del_gendisk(ace->gd);
|
|
put_disk(ace->gd);
|
|
}
|
|
|
|
if (ace->queue)
|
|
blk_cleanup_queue(ace->queue);
|
|
|
|
tasklet_kill(&ace->fsm_tasklet);
|
|
|
|
if (ace->irq != NO_IRQ)
|
|
free_irq(ace->irq, ace);
|
|
|
|
iounmap(ace->baseaddr);
|
|
}
|
|
|
|
static int __devinit
|
|
ace_alloc(struct device *dev, int id, resource_size_t physaddr,
|
|
int irq, int bus_width)
|
|
{
|
|
struct ace_device *ace;
|
|
int rc;
|
|
dev_dbg(dev, "ace_alloc(%p)\n", dev);
|
|
|
|
if (!physaddr) {
|
|
rc = -ENODEV;
|
|
goto err_noreg;
|
|
}
|
|
|
|
/* Allocate and initialize the ace device structure */
|
|
ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL);
|
|
if (!ace) {
|
|
rc = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
ace->dev = dev;
|
|
ace->id = id;
|
|
ace->physaddr = physaddr;
|
|
ace->irq = irq;
|
|
ace->bus_width = bus_width;
|
|
|
|
/* Call the setup code */
|
|
rc = ace_setup(ace);
|
|
if (rc)
|
|
goto err_setup;
|
|
|
|
dev_set_drvdata(dev, ace);
|
|
return 0;
|
|
|
|
err_setup:
|
|
dev_set_drvdata(dev, NULL);
|
|
kfree(ace);
|
|
err_alloc:
|
|
err_noreg:
|
|
dev_err(dev, "could not initialize device, err=%i\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
static void __devexit ace_free(struct device *dev)
|
|
{
|
|
struct ace_device *ace = dev_get_drvdata(dev);
|
|
dev_dbg(dev, "ace_free(%p)\n", dev);
|
|
|
|
if (ace) {
|
|
ace_teardown(ace);
|
|
dev_set_drvdata(dev, NULL);
|
|
kfree(ace);
|
|
}
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Platform Bus Support
|
|
*/
|
|
|
|
static int __devinit ace_probe(struct platform_device *dev)
|
|
{
|
|
resource_size_t physaddr = 0;
|
|
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
|
|
int id = dev->id;
|
|
int irq = NO_IRQ;
|
|
int i;
|
|
|
|
dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
|
|
|
|
for (i = 0; i < dev->num_resources; i++) {
|
|
if (dev->resource[i].flags & IORESOURCE_MEM)
|
|
physaddr = dev->resource[i].start;
|
|
if (dev->resource[i].flags & IORESOURCE_IRQ)
|
|
irq = dev->resource[i].start;
|
|
}
|
|
|
|
/* Call the bus-independant setup code */
|
|
return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
|
|
}
|
|
|
|
/*
|
|
* Platform bus remove() method
|
|
*/
|
|
static int __devexit ace_remove(struct platform_device *dev)
|
|
{
|
|
ace_free(&dev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ace_platform_driver = {
|
|
.probe = ace_probe,
|
|
.remove = __devexit_p(ace_remove),
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "xsysace",
|
|
},
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* OF_Platform Bus Support
|
|
*/
|
|
|
|
#if defined(CONFIG_OF)
|
|
static int __devinit
|
|
ace_of_probe(struct of_device *op, const struct of_device_id *match)
|
|
{
|
|
struct resource res;
|
|
resource_size_t physaddr;
|
|
const u32 *id;
|
|
int irq, bus_width, rc;
|
|
|
|
dev_dbg(&op->dev, "ace_of_probe(%p, %p)\n", op, match);
|
|
|
|
/* device id */
|
|
id = of_get_property(op->dev.of_node, "port-number", NULL);
|
|
|
|
/* physaddr */
|
|
rc = of_address_to_resource(op->dev.of_node, 0, &res);
|
|
if (rc) {
|
|
dev_err(&op->dev, "invalid address\n");
|
|
return rc;
|
|
}
|
|
physaddr = res.start;
|
|
|
|
/* irq */
|
|
irq = irq_of_parse_and_map(op->dev.of_node, 0);
|
|
|
|
/* bus width */
|
|
bus_width = ACE_BUS_WIDTH_16;
|
|
if (of_find_property(op->dev.of_node, "8-bit", NULL))
|
|
bus_width = ACE_BUS_WIDTH_8;
|
|
|
|
/* Call the bus-independant setup code */
|
|
return ace_alloc(&op->dev, id ? *id : 0, physaddr, irq, bus_width);
|
|
}
|
|
|
|
static int __devexit ace_of_remove(struct of_device *op)
|
|
{
|
|
ace_free(&op->dev);
|
|
return 0;
|
|
}
|
|
|
|
/* Match table for of_platform binding */
|
|
static const struct of_device_id ace_of_match[] __devinitconst = {
|
|
{ .compatible = "xlnx,opb-sysace-1.00.b", },
|
|
{ .compatible = "xlnx,opb-sysace-1.00.c", },
|
|
{ .compatible = "xlnx,xps-sysace-1.00.a", },
|
|
{ .compatible = "xlnx,sysace", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ace_of_match);
|
|
|
|
static struct of_platform_driver ace_of_driver = {
|
|
.probe = ace_of_probe,
|
|
.remove = __devexit_p(ace_of_remove),
|
|
.driver = {
|
|
.name = "xsysace",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = ace_of_match,
|
|
},
|
|
};
|
|
|
|
/* Registration helpers to keep the number of #ifdefs to a minimum */
|
|
static inline int __init ace_of_register(void)
|
|
{
|
|
pr_debug("xsysace: registering OF binding\n");
|
|
return of_register_platform_driver(&ace_of_driver);
|
|
}
|
|
|
|
static inline void __exit ace_of_unregister(void)
|
|
{
|
|
of_unregister_platform_driver(&ace_of_driver);
|
|
}
|
|
#else /* CONFIG_OF */
|
|
/* CONFIG_OF not enabled; do nothing helpers */
|
|
static inline int __init ace_of_register(void) { return 0; }
|
|
static inline void __exit ace_of_unregister(void) { }
|
|
#endif /* CONFIG_OF */
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Module init/exit routines
|
|
*/
|
|
static int __init ace_init(void)
|
|
{
|
|
int rc;
|
|
|
|
ace_major = register_blkdev(ace_major, "xsysace");
|
|
if (ace_major <= 0) {
|
|
rc = -ENOMEM;
|
|
goto err_blk;
|
|
}
|
|
|
|
rc = ace_of_register();
|
|
if (rc)
|
|
goto err_of;
|
|
|
|
pr_debug("xsysace: registering platform binding\n");
|
|
rc = platform_driver_register(&ace_platform_driver);
|
|
if (rc)
|
|
goto err_plat;
|
|
|
|
pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major);
|
|
return 0;
|
|
|
|
err_plat:
|
|
ace_of_unregister();
|
|
err_of:
|
|
unregister_blkdev(ace_major, "xsysace");
|
|
err_blk:
|
|
printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
static void __exit ace_exit(void)
|
|
{
|
|
pr_debug("Unregistering Xilinx SystemACE driver\n");
|
|
platform_driver_unregister(&ace_platform_driver);
|
|
ace_of_unregister();
|
|
unregister_blkdev(ace_major, "xsysace");
|
|
}
|
|
|
|
module_init(ace_init);
|
|
module_exit(ace_exit);
|