linux/net/bridge/br.c

221 lines
4.5 KiB
C

/*
* Generic parts
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/llc.h>
#include <net/llc.h>
#include <net/stp.h>
#include "br_private.h"
/*
* Handle changes in state of network devices enslaved to a bridge.
*
* Note: don't care about up/down if bridge itself is down, because
* port state is checked when bridge is brought up.
*/
static int br_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net_bridge_port *p;
struct net_bridge *br;
bool changed_addr;
int err;
/* register of bridge completed, add sysfs entries */
if ((dev->priv_flags & IFF_EBRIDGE) && event == NETDEV_REGISTER) {
br_sysfs_addbr(dev);
return NOTIFY_DONE;
}
/* not a port of a bridge */
p = br_port_get_rtnl(dev);
if (!p)
return NOTIFY_DONE;
br = p->br;
switch (event) {
case NETDEV_CHANGEMTU:
dev_set_mtu(br->dev, br_min_mtu(br));
break;
case NETDEV_CHANGEADDR:
spin_lock_bh(&br->lock);
br_fdb_changeaddr(p, dev->dev_addr);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
break;
case NETDEV_CHANGE:
br_port_carrier_check(p);
break;
case NETDEV_FEAT_CHANGE:
netdev_update_features(br->dev);
break;
case NETDEV_DOWN:
spin_lock_bh(&br->lock);
if (br->dev->flags & IFF_UP)
br_stp_disable_port(p);
spin_unlock_bh(&br->lock);
break;
case NETDEV_UP:
if (netif_running(br->dev) && netif_oper_up(dev)) {
spin_lock_bh(&br->lock);
br_stp_enable_port(p);
spin_unlock_bh(&br->lock);
}
break;
case NETDEV_UNREGISTER:
br_del_if(br, dev);
break;
case NETDEV_CHANGENAME:
err = br_sysfs_renameif(p);
if (err)
return notifier_from_errno(err);
break;
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
return NOTIFY_BAD;
case NETDEV_RESEND_IGMP:
/* Propagate to master device */
call_netdevice_notifiers(event, br->dev);
break;
}
/* Events that may cause spanning tree to refresh */
if (event == NETDEV_CHANGEADDR || event == NETDEV_UP ||
event == NETDEV_CHANGE || event == NETDEV_DOWN)
br_ifinfo_notify(RTM_NEWLINK, p);
return NOTIFY_DONE;
}
static struct notifier_block br_device_notifier = {
.notifier_call = br_device_event
};
static void __net_exit br_net_exit(struct net *net)
{
struct net_device *dev;
LIST_HEAD(list);
rtnl_lock();
for_each_netdev(net, dev)
if (dev->priv_flags & IFF_EBRIDGE)
br_dev_delete(dev, &list);
unregister_netdevice_many(&list);
rtnl_unlock();
}
static struct pernet_operations br_net_ops = {
.exit = br_net_exit,
};
static const struct stp_proto br_stp_proto = {
.rcv = br_stp_rcv,
};
static int __init br_init(void)
{
int err;
err = stp_proto_register(&br_stp_proto);
if (err < 0) {
pr_err("bridge: can't register sap for STP\n");
return err;
}
err = br_fdb_init();
if (err)
goto err_out;
err = register_pernet_subsys(&br_net_ops);
if (err)
goto err_out1;
err = br_netfilter_init();
if (err)
goto err_out2;
err = register_netdevice_notifier(&br_device_notifier);
if (err)
goto err_out3;
err = br_netlink_init();
if (err)
goto err_out4;
brioctl_set(br_ioctl_deviceless_stub);
#if IS_ENABLED(CONFIG_ATM_LANE)
br_fdb_test_addr_hook = br_fdb_test_addr;
#endif
return 0;
err_out4:
unregister_netdevice_notifier(&br_device_notifier);
err_out3:
br_netfilter_fini();
err_out2:
unregister_pernet_subsys(&br_net_ops);
err_out1:
br_fdb_fini();
err_out:
stp_proto_unregister(&br_stp_proto);
return err;
}
static void __exit br_deinit(void)
{
stp_proto_unregister(&br_stp_proto);
br_netlink_fini();
unregister_netdevice_notifier(&br_device_notifier);
brioctl_set(NULL);
unregister_pernet_subsys(&br_net_ops);
rcu_barrier(); /* Wait for completion of call_rcu()'s */
br_netfilter_fini();
#if IS_ENABLED(CONFIG_ATM_LANE)
br_fdb_test_addr_hook = NULL;
#endif
br_fdb_fini();
}
module_init(br_init)
module_exit(br_deinit)
MODULE_LICENSE("GPL");
MODULE_VERSION(BR_VERSION);
MODULE_ALIAS_RTNL_LINK("bridge");