1727339590
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the clocksource at early stage. However, this macro is also used to initialize the clockevent if any, or the clockevent only. It was originally suggested to declare another macro to initialize a clockevent, so in order to separate the two entities even they belong to the same IP. This was not accepted because of the impact on the DT where splitting a clocksource/clockevent definition does not make sense as it is a Linux concept not a hardware description. On the other side, the clocksource has not interrupt declared while the clockevent has, so it is easy from the driver to know if the description is for a clockevent or a clocksource, IOW it could be implemented at the driver level. So instead of dealing with a named clocksource macro, let's use a more generic one: TIMER_OF_DECLARE. The patch has not functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
243 lines
6.8 KiB
C
243 lines
6.8 KiB
C
/*
|
|
* Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#define DRIVER_NAME "asm9260-timer"
|
|
|
|
/*
|
|
* this device provide 4 offsets for each register:
|
|
* 0x0 - plain read write mode
|
|
* 0x4 - set mode, OR logic.
|
|
* 0x8 - clr mode, XOR logic.
|
|
* 0xc - togle mode.
|
|
*/
|
|
#define SET_REG 4
|
|
#define CLR_REG 8
|
|
|
|
#define HW_IR 0x0000 /* RW. Interrupt */
|
|
#define BM_IR_CR0 BIT(4)
|
|
#define BM_IR_MR3 BIT(3)
|
|
#define BM_IR_MR2 BIT(2)
|
|
#define BM_IR_MR1 BIT(1)
|
|
#define BM_IR_MR0 BIT(0)
|
|
|
|
#define HW_TCR 0x0010 /* RW. Timer controller */
|
|
/* BM_C*_RST
|
|
* Timer Counter and the Prescale Counter are synchronously reset on the
|
|
* next positive edge of PCLK. The counters remain reset until TCR[1] is
|
|
* returned to zero. */
|
|
#define BM_C3_RST BIT(7)
|
|
#define BM_C2_RST BIT(6)
|
|
#define BM_C1_RST BIT(5)
|
|
#define BM_C0_RST BIT(4)
|
|
/* BM_C*_EN
|
|
* 1 - Timer Counter and Prescale Counter are enabled for counting
|
|
* 0 - counters are disabled */
|
|
#define BM_C3_EN BIT(3)
|
|
#define BM_C2_EN BIT(2)
|
|
#define BM_C1_EN BIT(1)
|
|
#define BM_C0_EN BIT(0)
|
|
|
|
#define HW_DIR 0x0020 /* RW. Direction? */
|
|
/* 00 - count up
|
|
* 01 - count down
|
|
* 10 - ?? 2^n/2 */
|
|
#define BM_DIR_COUNT_UP 0
|
|
#define BM_DIR_COUNT_DOWN 1
|
|
#define BM_DIR0_SHIFT 0
|
|
#define BM_DIR1_SHIFT 4
|
|
#define BM_DIR2_SHIFT 8
|
|
#define BM_DIR3_SHIFT 12
|
|
#define BM_DIR_DEFAULT (BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
|
|
BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
|
|
|
|
#define HW_TC0 0x0030 /* RO. Timer counter 0 */
|
|
/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
|
|
* interrupt. This registers can be used to detect overflow */
|
|
#define HW_TC1 0x0040
|
|
#define HW_TC2 0x0050
|
|
#define HW_TC3 0x0060
|
|
|
|
#define HW_PR 0x0070 /* RW. prescaler */
|
|
#define BM_PR_DISABLE 0
|
|
#define HW_PC 0x0080 /* RO. Prescaler counter */
|
|
#define HW_MCR 0x0090 /* RW. Match control */
|
|
/* enable interrupt on match */
|
|
#define BM_MCR_INT_EN(n) (1 << (n * 3 + 0))
|
|
/* enable TC reset on match */
|
|
#define BM_MCR_RES_EN(n) (1 << (n * 3 + 1))
|
|
/* enable stop TC on match */
|
|
#define BM_MCR_STOP_EN(n) (1 << (n * 3 + 2))
|
|
|
|
#define HW_MR0 0x00a0 /* RW. Match reg */
|
|
#define HW_MR1 0x00b0
|
|
#define HW_MR2 0x00C0
|
|
#define HW_MR3 0x00D0
|
|
|
|
#define HW_CTCR 0x0180 /* Counter control */
|
|
#define BM_CTCR0_SHIFT 0
|
|
#define BM_CTCR1_SHIFT 2
|
|
#define BM_CTCR2_SHIFT 4
|
|
#define BM_CTCR3_SHIFT 6
|
|
#define BM_CTCR_TM 0 /* Timer mode. Every rising PCLK edge. */
|
|
#define BM_CTCR_DEFAULT (BM_CTCR_TM << BM_CTCR0_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR1_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR2_SHIFT | \
|
|
BM_CTCR_TM << BM_CTCR3_SHIFT)
|
|
|
|
static struct asm9260_timer_priv {
|
|
void __iomem *base;
|
|
unsigned long ticks_per_jiffy;
|
|
} priv;
|
|
|
|
static int asm9260_timer_set_next_event(unsigned long delta,
|
|
struct clock_event_device *evt)
|
|
{
|
|
/* configure match count for TC0 */
|
|
writel_relaxed(delta, priv.base + HW_MR0);
|
|
/* enable TC0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
/* stop timer0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
|
|
}
|
|
|
|
static int asm9260_timer_shutdown(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
return 0;
|
|
}
|
|
|
|
static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
|
|
/* enable reset and stop on match */
|
|
writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
|
|
priv.base + HW_MCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static int asm9260_timer_set_periodic(struct clock_event_device *evt)
|
|
{
|
|
__asm9260_timer_shutdown(evt);
|
|
|
|
/* disable reset and stop on match */
|
|
writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
|
|
priv.base + HW_MCR + CLR_REG);
|
|
/* configure match count for TC0 */
|
|
writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
|
|
/* enable TC0 */
|
|
writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device event_dev = {
|
|
.name = DRIVER_NAME,
|
|
.rating = 200,
|
|
.features = CLOCK_EVT_FEAT_PERIODIC |
|
|
CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_next_event = asm9260_timer_set_next_event,
|
|
.set_state_shutdown = asm9260_timer_shutdown,
|
|
.set_state_periodic = asm9260_timer_set_periodic,
|
|
.set_state_oneshot = asm9260_timer_set_oneshot,
|
|
.tick_resume = asm9260_timer_shutdown,
|
|
};
|
|
|
|
static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
evt->event_handler(evt);
|
|
|
|
writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* Timer initialization
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
static int __init asm9260_timer_init(struct device_node *np)
|
|
{
|
|
int irq;
|
|
struct clk *clk;
|
|
int ret;
|
|
unsigned long rate;
|
|
|
|
priv.base = of_io_request_and_map(np, 0, np->name);
|
|
if (IS_ERR(priv.base)) {
|
|
pr_err("%s: unable to map resource\n", np->name);
|
|
return PTR_ERR(priv.base);
|
|
}
|
|
|
|
clk = of_clk_get(np, 0);
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
pr_err("Failed to enable clk!\n");
|
|
return ret;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
|
|
DRIVER_NAME, &event_dev);
|
|
if (ret) {
|
|
pr_err("Failed to setup irq!\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set all timers for count-up */
|
|
writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
|
|
/* disable divider */
|
|
writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
|
|
/* make sure all timers use every rising PCLK edge. */
|
|
writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
|
|
/* enable interrupt for TC0 and clean setting for all other lines */
|
|
writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
|
|
|
|
rate = clk_get_rate(clk);
|
|
clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
|
|
200, 32, clocksource_mmio_readl_up);
|
|
|
|
/* Seems like we can't use counter without match register even if
|
|
* actions for MR are disabled. So, set MR to max value. */
|
|
writel_relaxed(0xffffffff, priv.base + HW_MR1);
|
|
/* enable TC1 */
|
|
writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
|
|
|
|
priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
|
|
event_dev.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
|
|
|
|
return 0;
|
|
}
|
|
TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
|
|
asm9260_timer_init);
|