41279f0197
Make use of the 64 bit sdbuf width on Renesas R-Car Gen3. If the registers are 8 byte apart, the width is also 64 bit. For all others, the width is 32 bit, even if the registers are only 16 bit apart. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
670 lines
18 KiB
C
670 lines
18 KiB
C
/*
|
|
* Renesas SDHI
|
|
*
|
|
* Copyright (C) 2015-17 Renesas Electronics Corporation
|
|
* Copyright (C) 2016-17 Sang Engineering, Wolfram Sang
|
|
* Copyright (C) 2016-17 Horms Solutions, Simon Horman
|
|
* Copyright (C) 2009 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Based on "Compaq ASIC3 support":
|
|
*
|
|
* Copyright 2001 Compaq Computer Corporation.
|
|
* Copyright 2004-2005 Phil Blundell
|
|
* Copyright 2007-2008 OpenedHand Ltd.
|
|
*
|
|
* Authors: Phil Blundell <pb@handhelds.org>,
|
|
* Samuel Ortiz <sameo@openedhand.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/sh_dma.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/pinctrl-state.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "renesas_sdhi.h"
|
|
#include "tmio_mmc.h"
|
|
|
|
#define EXT_ACC 0xe4
|
|
|
|
#define SDHI_VER_GEN2_SDR50 0x490c
|
|
#define SDHI_VER_RZ_A1 0x820b
|
|
/* very old datasheets said 0x490c for SDR104, too. They are wrong! */
|
|
#define SDHI_VER_GEN2_SDR104 0xcb0d
|
|
#define SDHI_VER_GEN3_SD 0xcc10
|
|
#define SDHI_VER_GEN3_SDMMC 0xcd10
|
|
|
|
#define host_to_priv(host) \
|
|
container_of((host)->pdata, struct renesas_sdhi, mmc_data)
|
|
|
|
struct renesas_sdhi {
|
|
struct clk *clk;
|
|
struct clk *clk_cd;
|
|
struct tmio_mmc_data mmc_data;
|
|
struct tmio_mmc_dma dma_priv;
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default, *pins_uhs;
|
|
void __iomem *scc_ctl;
|
|
};
|
|
|
|
static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* see also
|
|
* renesas_sdhi_of_data :: dma_buswidth
|
|
*/
|
|
switch (sd_ctrl_read16(host, CTL_VERSION)) {
|
|
case SDHI_VER_GEN2_SDR50:
|
|
val = (width == 32) ? 0x0001 : 0x0000;
|
|
break;
|
|
case SDHI_VER_GEN2_SDR104:
|
|
val = (width == 32) ? 0x0000 : 0x0001;
|
|
break;
|
|
case SDHI_VER_GEN3_SD:
|
|
case SDHI_VER_GEN3_SDMMC:
|
|
if (width == 64)
|
|
val = 0x0000;
|
|
else if (width == 32)
|
|
val = 0x0101;
|
|
else
|
|
val = 0x0001;
|
|
break;
|
|
default:
|
|
/* nothing to do */
|
|
return;
|
|
}
|
|
|
|
sd_ctrl_write16(host, EXT_ACC, val);
|
|
}
|
|
|
|
static int renesas_sdhi_clk_enable(struct tmio_mmc_host *host)
|
|
{
|
|
struct mmc_host *mmc = host->mmc;
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
int ret = clk_prepare_enable(priv->clk);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(priv->clk_cd);
|
|
if (ret < 0) {
|
|
clk_disable_unprepare(priv->clk);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The clock driver may not know what maximum frequency
|
|
* actually works, so it should be set with the max-frequency
|
|
* property which will already have been read to f_max. If it
|
|
* was missing, assume the current frequency is the maximum.
|
|
*/
|
|
if (!mmc->f_max)
|
|
mmc->f_max = clk_get_rate(priv->clk);
|
|
|
|
/*
|
|
* Minimum frequency is the minimum input clock frequency
|
|
* divided by our maximum divider.
|
|
*/
|
|
mmc->f_min = max(clk_round_rate(priv->clk, 1) / 512, 1L);
|
|
|
|
/* enable 16bit data access on SDBUF as default */
|
|
renesas_sdhi_sdbuf_width(host, 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
|
|
unsigned int new_clock)
|
|
{
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
unsigned int freq, diff, best_freq = 0, diff_min = ~0;
|
|
int i, ret;
|
|
|
|
/* tested only on R-Car Gen2+ currently; may work for others */
|
|
if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
|
|
return clk_get_rate(priv->clk);
|
|
|
|
/*
|
|
* We want the bus clock to be as close as possible to, but no
|
|
* greater than, new_clock. As we can divide by 1 << i for
|
|
* any i in [0, 9] we want the input clock to be as close as
|
|
* possible, but no greater than, new_clock << i.
|
|
*/
|
|
for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) {
|
|
freq = clk_round_rate(priv->clk, new_clock << i);
|
|
if (freq > (new_clock << i)) {
|
|
/* Too fast; look for a slightly slower option */
|
|
freq = clk_round_rate(priv->clk,
|
|
(new_clock << i) / 4 * 3);
|
|
if (freq > (new_clock << i))
|
|
continue;
|
|
}
|
|
|
|
diff = new_clock - (freq >> i);
|
|
if (diff <= diff_min) {
|
|
best_freq = freq;
|
|
diff_min = diff;
|
|
}
|
|
}
|
|
|
|
ret = clk_set_rate(priv->clk, best_freq);
|
|
|
|
return ret == 0 ? best_freq : clk_get_rate(priv->clk);
|
|
}
|
|
|
|
static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host)
|
|
{
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
clk_disable_unprepare(priv->clk_cd);
|
|
}
|
|
|
|
static int renesas_sdhi_card_busy(struct mmc_host *mmc)
|
|
{
|
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
|
|
|
return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
|
|
TMIO_STAT_DAT0);
|
|
}
|
|
|
|
static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
struct pinctrl_state *pin_state;
|
|
int ret;
|
|
|
|
switch (ios->signal_voltage) {
|
|
case MMC_SIGNAL_VOLTAGE_330:
|
|
pin_state = priv->pins_default;
|
|
break;
|
|
case MMC_SIGNAL_VOLTAGE_180:
|
|
pin_state = priv->pins_uhs;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If anything is missing, assume signal voltage is fixed at
|
|
* 3.3V and succeed/fail accordingly.
|
|
*/
|
|
if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state))
|
|
return ios->signal_voltage ==
|
|
MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL;
|
|
|
|
ret = mmc_regulator_set_vqmmc(host->mmc, ios);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pinctrl_select_state(priv->pinctrl, pin_state);
|
|
}
|
|
|
|
/* SCC registers */
|
|
#define SH_MOBILE_SDHI_SCC_DTCNTL 0x000
|
|
#define SH_MOBILE_SDHI_SCC_TAPSET 0x002
|
|
#define SH_MOBILE_SDHI_SCC_DT2FF 0x004
|
|
#define SH_MOBILE_SDHI_SCC_CKSEL 0x006
|
|
#define SH_MOBILE_SDHI_SCC_RVSCNTL 0x008
|
|
#define SH_MOBILE_SDHI_SCC_RVSREQ 0x00A
|
|
|
|
/* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */
|
|
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN BIT(0)
|
|
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16
|
|
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff
|
|
|
|
/* Definitions for values the SH_MOBILE_SDHI_SCC_CKSEL register */
|
|
#define SH_MOBILE_SDHI_SCC_CKSEL_DTSEL BIT(0)
|
|
/* Definitions for values the SH_MOBILE_SDHI_SCC_RVSCNTL register */
|
|
#define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN BIT(0)
|
|
/* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */
|
|
#define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR BIT(2)
|
|
|
|
static inline u32 sd_scc_read32(struct tmio_mmc_host *host,
|
|
struct renesas_sdhi *priv, int addr)
|
|
{
|
|
return readl(priv->scc_ctl + (addr << host->bus_shift));
|
|
}
|
|
|
|
static inline void sd_scc_write32(struct tmio_mmc_host *host,
|
|
struct renesas_sdhi *priv,
|
|
int addr, u32 val)
|
|
{
|
|
writel(val, priv->scc_ctl + (addr << host->bus_shift));
|
|
}
|
|
|
|
static unsigned int renesas_sdhi_init_tuning(struct tmio_mmc_host *host)
|
|
{
|
|
struct renesas_sdhi *priv;
|
|
|
|
priv = host_to_priv(host);
|
|
|
|
/* set sampling clock selection range */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL,
|
|
0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT);
|
|
|
|
/* Initialize SCC */
|
|
sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, 0x0);
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL,
|
|
SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN |
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL));
|
|
|
|
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
|
|
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
|
|
SH_MOBILE_SDHI_SCC_CKSEL_DTSEL |
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL));
|
|
|
|
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
|
|
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
|
|
~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, host->scc_tappos);
|
|
|
|
/* Read TAPNUM */
|
|
return (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL) >>
|
|
SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) &
|
|
SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK;
|
|
}
|
|
|
|
static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host,
|
|
unsigned long tap)
|
|
{
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
|
|
/* Set sampling clock position */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap);
|
|
}
|
|
|
|
#define SH_MOBILE_SDHI_MAX_TAP 3
|
|
|
|
static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
|
|
{
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
unsigned long tap_cnt; /* counter of tuning success */
|
|
unsigned long tap_set; /* tap position */
|
|
unsigned long tap_start;/* start position of tuning success */
|
|
unsigned long tap_end; /* end position of tuning success */
|
|
unsigned long ntap; /* temporary counter of tuning success */
|
|
unsigned long i;
|
|
|
|
/* Clear SCC_RVSREQ */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
|
|
|
|
/*
|
|
* Find the longest consecutive run of successful probes. If that
|
|
* is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the
|
|
* center index as the tap.
|
|
*/
|
|
tap_cnt = 0;
|
|
ntap = 0;
|
|
tap_start = 0;
|
|
tap_end = 0;
|
|
for (i = 0; i < host->tap_num * 2; i++) {
|
|
if (test_bit(i, host->taps)) {
|
|
ntap++;
|
|
} else {
|
|
if (ntap > tap_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
tap_cnt = ntap;
|
|
}
|
|
ntap = 0;
|
|
}
|
|
}
|
|
|
|
if (ntap > tap_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
tap_cnt = ntap;
|
|
}
|
|
|
|
if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP)
|
|
tap_set = (tap_start + tap_end) / 2 % host->tap_num;
|
|
else
|
|
return -EIO;
|
|
|
|
/* Set SCC */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap_set);
|
|
|
|
/* Enable auto re-tuning */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
|
|
SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN |
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host)
|
|
{
|
|
struct renesas_sdhi *priv = host_to_priv(host);
|
|
|
|
/* Check SCC error */
|
|
if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) &
|
|
SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &&
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) &
|
|
SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) {
|
|
/* Clear SCC error */
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
|
|
{
|
|
struct renesas_sdhi *priv;
|
|
|
|
priv = host_to_priv(host);
|
|
|
|
/* Reset SCC */
|
|
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
|
|
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
|
|
~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL &
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL));
|
|
|
|
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
|
|
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
|
|
~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
|
|
|
|
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
|
|
~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
|
|
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
|
|
}
|
|
|
|
static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
|
|
{
|
|
int timeout = 1000;
|
|
/* CBSY is set when busy, SCLKDIVEN is cleared when busy */
|
|
u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0);
|
|
|
|
while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
|
|
& bit) == wait_state)
|
|
udelay(1);
|
|
|
|
if (!timeout) {
|
|
dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
|
|
{
|
|
u32 bit = TMIO_STAT_SCLKDIVEN;
|
|
|
|
switch (addr) {
|
|
case CTL_SD_CMD:
|
|
case CTL_STOP_INTERNAL_ACTION:
|
|
case CTL_XFER_BLK_COUNT:
|
|
case CTL_SD_XFER_LEN:
|
|
case CTL_SD_MEM_CARD_OPT:
|
|
case CTL_TRANSACTION_CTL:
|
|
case CTL_DMA_ENABLE:
|
|
case EXT_ACC:
|
|
if (host->pdata->flags & TMIO_MMC_HAVE_CBSY)
|
|
bit = TMIO_STAT_CMD_BUSY;
|
|
/* fallthrough */
|
|
case CTL_SD_CARD_CLK_CTL:
|
|
return renesas_sdhi_wait_idle(host, bit);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int renesas_sdhi_multi_io_quirk(struct mmc_card *card,
|
|
unsigned int direction, int blk_size)
|
|
{
|
|
/*
|
|
* In Renesas controllers, when performing a
|
|
* multiple block read of one or two blocks,
|
|
* depending on the timing with which the
|
|
* response register is read, the response
|
|
* value may not be read properly.
|
|
* Use single block read for this HW bug
|
|
*/
|
|
if ((direction == MMC_DATA_READ) &&
|
|
blk_size == 2)
|
|
return 1;
|
|
|
|
return blk_size;
|
|
}
|
|
|
|
static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
|
|
{
|
|
/* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */
|
|
int width = (host->bus_shift == 2) ? 64 : 32;
|
|
|
|
sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0);
|
|
renesas_sdhi_sdbuf_width(host, enable ? width : 16);
|
|
}
|
|
|
|
int renesas_sdhi_probe(struct platform_device *pdev,
|
|
const struct tmio_mmc_dma_ops *dma_ops)
|
|
{
|
|
struct tmio_mmc_data *mmd = pdev->dev.platform_data;
|
|
const struct renesas_sdhi_of_data *of_data;
|
|
struct tmio_mmc_data *mmc_data;
|
|
struct tmio_mmc_dma *dma_priv;
|
|
struct tmio_mmc_host *host;
|
|
struct renesas_sdhi *priv;
|
|
struct resource *res;
|
|
int irq, ret, i;
|
|
|
|
of_data = of_device_get_match_data(&pdev->dev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct renesas_sdhi),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
mmc_data = &priv->mmc_data;
|
|
dma_priv = &priv->dma_priv;
|
|
|
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
ret = PTR_ERR(priv->clk);
|
|
dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
|
|
goto eprobe;
|
|
}
|
|
|
|
/*
|
|
* Some controllers provide a 2nd clock just to run the internal card
|
|
* detection logic. Unfortunately, the existing driver architecture does
|
|
* not support a separation of clocks for runtime PM usage. When
|
|
* native hotplug is used, the tmio driver assumes that the core
|
|
* must continue to run for card detect to stay active, so we cannot
|
|
* disable it.
|
|
* Additionally, it is prohibited to supply a clock to the core but not
|
|
* to the card detect circuit. That leaves us with if separate clocks
|
|
* are presented, we must treat them both as virtually 1 clock.
|
|
*/
|
|
priv->clk_cd = devm_clk_get(&pdev->dev, "cd");
|
|
if (IS_ERR(priv->clk_cd))
|
|
priv->clk_cd = NULL;
|
|
|
|
priv->pinctrl = devm_pinctrl_get(&pdev->dev);
|
|
if (!IS_ERR(priv->pinctrl)) {
|
|
priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
|
|
PINCTRL_STATE_DEFAULT);
|
|
priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl,
|
|
"state_uhs");
|
|
}
|
|
|
|
host = tmio_mmc_host_alloc(pdev);
|
|
if (!host) {
|
|
ret = -ENOMEM;
|
|
goto eprobe;
|
|
}
|
|
|
|
if (of_data) {
|
|
mmc_data->flags |= of_data->tmio_flags;
|
|
mmc_data->ocr_mask = of_data->tmio_ocr_mask;
|
|
mmc_data->capabilities |= of_data->capabilities;
|
|
mmc_data->capabilities2 |= of_data->capabilities2;
|
|
mmc_data->dma_rx_offset = of_data->dma_rx_offset;
|
|
mmc_data->max_blk_count = of_data->max_blk_count;
|
|
mmc_data->max_segs = of_data->max_segs;
|
|
dma_priv->dma_buswidth = of_data->dma_buswidth;
|
|
host->bus_shift = of_data->bus_shift;
|
|
}
|
|
|
|
host->dma = dma_priv;
|
|
host->write16_hook = renesas_sdhi_write16_hook;
|
|
host->clk_enable = renesas_sdhi_clk_enable;
|
|
host->clk_update = renesas_sdhi_clk_update;
|
|
host->clk_disable = renesas_sdhi_clk_disable;
|
|
host->multi_io_quirk = renesas_sdhi_multi_io_quirk;
|
|
|
|
/* SDR speeds are only available on Gen2+ */
|
|
if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
|
|
/* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
|
|
host->card_busy = renesas_sdhi_card_busy;
|
|
host->start_signal_voltage_switch =
|
|
renesas_sdhi_start_signal_voltage_switch;
|
|
}
|
|
|
|
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
|
|
if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */
|
|
host->bus_shift = 1;
|
|
|
|
if (mmd)
|
|
*mmc_data = *mmd;
|
|
|
|
dma_priv->filter = shdma_chan_filter;
|
|
dma_priv->enable = renesas_sdhi_enable_dma;
|
|
|
|
mmc_data->alignment_shift = 1; /* 2-byte alignment */
|
|
mmc_data->capabilities |= MMC_CAP_MMC_HIGHSPEED;
|
|
|
|
/*
|
|
* All SDHI blocks support 2-byte and larger block sizes in 4-bit
|
|
* bus width mode.
|
|
*/
|
|
mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES;
|
|
|
|
/*
|
|
* All SDHI blocks support SDIO IRQ signalling.
|
|
*/
|
|
mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
|
|
|
|
/* All SDHI have CMD12 control bit */
|
|
mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
|
|
|
|
/* All SDHI have SDIO status bits which must be 1 */
|
|
mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS;
|
|
|
|
ret = tmio_mmc_host_probe(host, mmc_data, dma_ops);
|
|
if (ret < 0)
|
|
goto efree;
|
|
|
|
/* One Gen2 SDHI incarnation does NOT have a CBSY bit */
|
|
if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN2_SDR50)
|
|
mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY;
|
|
|
|
/* Enable tuning iff we have an SCC and a supported mode */
|
|
if (of_data && of_data->scc_offset &&
|
|
(host->mmc->caps & MMC_CAP_UHS_SDR104 ||
|
|
host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) {
|
|
const struct renesas_sdhi_scc *taps = of_data->taps;
|
|
bool hit = false;
|
|
|
|
host->mmc->caps |= MMC_CAP_HW_RESET;
|
|
|
|
for (i = 0; i < of_data->taps_num; i++) {
|
|
if (taps[i].clk_rate == 0 ||
|
|
taps[i].clk_rate == host->mmc->f_max) {
|
|
host->scc_tappos = taps->tap;
|
|
hit = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!hit)
|
|
dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
|
|
|
|
priv->scc_ctl = host->ctl + of_data->scc_offset;
|
|
host->init_tuning = renesas_sdhi_init_tuning;
|
|
host->prepare_tuning = renesas_sdhi_prepare_tuning;
|
|
host->select_tuning = renesas_sdhi_select_tuning;
|
|
host->check_scc_error = renesas_sdhi_check_scc_error;
|
|
host->hw_reset = renesas_sdhi_hw_reset;
|
|
}
|
|
|
|
i = 0;
|
|
while (1) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq < 0)
|
|
break;
|
|
i++;
|
|
ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
|
|
dev_name(&pdev->dev), host);
|
|
if (ret)
|
|
goto eirq;
|
|
}
|
|
|
|
/* There must be at least one IRQ source */
|
|
if (!i) {
|
|
ret = irq;
|
|
goto eirq;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
|
|
mmc_hostname(host->mmc), (unsigned long)
|
|
(platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
|
|
host->mmc->f_max / 1000000);
|
|
|
|
return ret;
|
|
|
|
eirq:
|
|
tmio_mmc_host_remove(host);
|
|
efree:
|
|
tmio_mmc_host_free(host);
|
|
eprobe:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(renesas_sdhi_probe);
|
|
|
|
int renesas_sdhi_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
|
|
|
tmio_mmc_host_remove(host);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(renesas_sdhi_remove);
|