OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/tty/serial
History
Arnd Bergmann 9ee51f01ee tty: serial/samsung: make register definitions global 
The registers for the Samsung S3C serial port are currently defined in
the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h
file, which is not visible to multiplatform capable drivers.

Unfortunately, it is not possible to move the file into a more local
place as we should normally try to, because the same registers
may be used in one of four places:

* In the driver itself
* In platform-independent ARM code for early debug output
* In platform_data definitions
* In the Samsung platform power management code

I have also found no way to logically split out a platform_data
file, other than possibly move everything into
include/linux/platform_data, which also felt wrong. The only
part of this file that makes sense to keep specific to the s3c24xx
platform are the virtual and physical addresses defined here,
which are needed in no other location.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 		2013-04-11 13:14:36 -07:00
..
8250 Merge 3.9-rc5 into tty-next 2013-04-01 12:01:10 -07:00
cpm_uart TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
jsm TTY: jsm, remove superfluous check 2013-03-18 16:17:20 -07:00
21285.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
68328serial.c TTY: cleanup tty->hw_stopped uses 2013-03-18 16:24:30 -07:00
Kconfig tty: serial: fix typo "SERIAL_S3C2412" 2013-03-12 08:53:23 -07:00
Makefile serial: rp2: New driver for Comtrol RocketPort 2 cards 2013-01-17 17:28:39 -08:00
altera_jtaguart.c tty: serial: altera_jtaguart: Simplify altera_jtaguart_init() 2013-02-05 11:13:51 -08:00
altera_uart.c tty: serial: altera_uart: Simplify altera_uart_init() 2013-02-05 11:13:50 -08:00
amba-pl010.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
amba-pl011.c amba-pl011: fix build error if CONFIG_DMA_ENGINE is not enabled 2013-04-03 11:34:55 -07:00
apbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
apbuart.h
…
ar933x_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
arc_uart.c TTY: cleanup tty->hw_stopped uses 2013-03-18 16:24:30 -07:00
atmel_serial.c tty: atmel_serial_probe(): index of atmel_ports[] fix 2013-03-15 13:23:29 -07:00
bcm63xx_uart.c serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char" 2013-03-12 08:53:23 -07:00
bfin_sport_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
bfin_sport_uart.h tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled. 2011-12-09 19:05:33 -08:00
bfin_uart.c TTY: serial/bfin_uart, unbreak build with KGDB enabled 2013-03-18 16:24:30 -07:00
clps711x.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
crisv10.c crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
crisv10.h crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
dz.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
dz.h
…
efm32-uart.c serial/efm32: parse location property 2013-01-21 13:56:46 -08:00
icom.c driver: tty: serial: remove cast for kzalloc return value 2013-03-18 17:09:37 -07:00
icom.h
…
ifx6x60.c tty: ifx6x60: Remove unused suspend/resume callbacks 2013-03-18 16:29:29 -07:00
ifx6x60.h serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown 2012-11-01 08:50:01 -07:00
imx.c serial: imx: fix uninitialized variable warning 2013-02-18 11:05:14 -08:00
ioc3_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ioc4_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ip22zilog.c TTY: ip22zilog, fix tty_flip_buffer_push call 2013-01-16 07:36:47 -08:00
ip22zilog.h
…
kgdb_nmi.c kgdb: remove #include <linux/serial_8250.h> from kgdb.h 2013-02-04 15:35:26 -08:00
kgdboc.c KGDB/KDB fixes and cleanups 2012-10-13 11:16:58 +09:00
lantiq.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
lpc32xx_hs.c serial: lpc32xx: Fix fallout from tty_port conversion 2013-01-18 16:05:15 -08:00
m32r_sio.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
m32r_sio.h TTY: serial, include pci.h in m32r_sio 2012-03-08 11:47:02 -08:00
m32r_sio_reg.h m32r: relocate drivers back out of 8250 dir 2012-02-08 15:04:32 -08:00
max310x.c tty: max310x: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
max3100.c serial: max3100: use spi_get_drvdata() and spi_set_drvdata() 2013-04-05 15:49:39 -07:00
mcf.c serial: mcf: Add support RS485 in ColdFire serial driver 2013-01-15 22:56:34 -08:00
mfd.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mpc52xx_uart.c tty: serial: mpc5xxx: fix PSC clock name bug 2013-03-12 08:53:22 -07:00
mpsc.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mrst_max3110.c tty: mrst_max3110: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
mrst_max3110.h max3110: add sysrq support 2011-08-26 11:01:15 -07:00
msm_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
msm_serial.h tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
msm_serial_hs.c TTY: serial/msm_serial_hs, remove unused tty 2013-03-18 16:24:30 -07:00
msm_smd_tty.c TTY: msm_smd_tty, clean up activate/shutdown 2013-03-18 16:19:44 -07:00
mux.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mxs-auart.c Merge 3.8-rc5 into tty-next 2013-01-25 13:27:36 -08:00
netx-serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
nwpserial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
of_serial.c serial: of_serial: Handle auto-flow-control property 2013-03-25 16:36:48 -07:00
omap-serial.c OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation 2013-02-05 11:13:16 -08:00
pch_uart.c serial: pch_uart: add console poll support 2013-03-15 13:55:23 -07:00
pmac_zilog.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pmac_zilog.h tty/serial/pmac_zilog: Fix suspend & resume 2011-12-16 11:10:01 +11:00
pnx8xxx_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pxa.c serial: pxa: fine-tune clk useage 2013-01-25 08:52:23 -08:00
rp2.c serial: rp2: New driver for Comtrol RocketPort 2 cards 2013-01-17 17:28:39 -08:00
sa1100.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
samsung.c tty: serial/samsung: make register definitions global 2013-04-11 13:14:36 -07:00
samsung.h serial: samsung: merge probe() function from all SoC specific extensions 2011-12-23 10:07:00 +09:00
sb1250-duart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sc26xx.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sccnxp.c tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
serial-tegra.c serial: tegra: Convert to devm_ioremap_resource() 2013-03-15 13:55:22 -07:00
serial_core.c tty: Remove ancient hardpps() 2013-02-13 10:17:06 -08:00
serial_ks8695.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
serial_txx9.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sh-sci.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sh-sci.h serial: sh-sci: remove obsolete Kconfig macros 2013-03-25 14:06:45 -07:00
sirfsoc_uart.c serial: sirf: only use lookup table to set baudrate when ioclk=150MHz 2013-01-17 17:18:55 -08:00
sirfsoc_uart.h serial: sirf: only use lookup table to set baudrate when ioclk=150MHz 2013-01-17 17:18:55 -08:00
sn_console.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
suncore.c tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h 2012-02-10 10:44:35 -08:00
sunhv.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sunsab.c TTY: serial, stop accessing potential NULLs 2013-03-18 17:09:37 -07:00
sunsab.h
…
sunsu.c sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option 2013-03-01 13:31:36 -08:00
sunzilog.c TTY: serial, stop accessing potential NULLs 2013-03-18 17:09:37 -07:00
sunzilog.h
…
timbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
timbuart.h
…
uartlite.c tty: serial: uartlite: Support uartlite on big and little endian systems 2013-02-13 08:38:45 -08:00
ucc_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
vr41xx_siu.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
vt8500_serial.c Merge 3.9-rc3 into tty-next 2013-03-21 16:07:34 -07:00
xilinx_uartps.c Merge 3.9-rc5 into tty-next 2013-04-01 12:01:10 -07:00
zs.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
zs.h
…