OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9ef5932f8a
linux/security/Kconfig
Daniel Jurgens d291f1a652 IB/core: Enforce PKey security on QPs 
Add new LSM hooks to allocate and free security contexts and check for
permission to access a PKey.

Allocate and free a security context when creating and destroying a QP.
This context is used for controlling access to PKeys.

When a request is made to modify a QP that changes the port, PKey index,
or alternate path, check that the QP has permission for the PKey in the
PKey table index on the subnet prefix of the port. If the QP is shared
make sure all handles to the QP also have access.

Store which port and PKey index a QP is using. After the reset to init
transition the user can modify the port, PKey index and alternate path
independently. So port and PKey settings changes can be a merge of the
previous settings and the new ones.

In order to maintain access control if there are PKey table or subnet
prefix change keep a list of all QPs are using each PKey index on
each port. If a change occurs all QPs using that device and port must
have access enforced for the new cache settings.

These changes add a transaction to the QP modify process. Association
with the old port and PKey index must be maintained if the modify fails,
and must be removed if it succeeds. Association with the new port and
PKey index must be established prior to the modify and removed if the
modify fails.

1. When a QP is modified to a particular Port, PKey index or alternate
   path insert that QP into the appropriate lists.

2. Check permission to access the new settings.

3. If step 2 grants access attempt to modify the QP.

4a. If steps 2 and 3 succeed remove any prior associations.

4b. If ether fails remove the new setting associations.

If a PKey table or subnet prefix changes walk the list of QPs and
check that they have permission. If not send the QP to the error state
and raise a fatal error event. If it's a shared QP make sure all the
QPs that share the real_qp have permission as well. If the QP that
owns a security structure is denied access the security structure is
marked as such and the QP is added to an error_list. Once the moving
the QP to error is complete the security structure mark is cleared.

Maintaining the lists correctly turns QP destroy into a transaction.
The hardware driver for the device frees the ib_qp structure, so while
the destroy is in progress the ib_qp pointer in the ib_qp_security
struct is undefined. When the destroy process begins the ib_qp_security
structure is marked as destroying. This prevents any action from being
taken on the QP pointer. After the QP is destroyed successfully it
could still listed on an error_list wait for it to be processed by that
flow before cleaning up the structure.

If the destroy fails the QPs port and PKey settings are reinserted into
the appropriate lists, the destroying flag is cleared, and access control
is enforced, in case there were any cache changes during the destroy
flow.

To keep the security changes isolated a new file is used to hold security
related functionality.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: merge fixup in ib_verbs.h and uverbs_cmd.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-05-23 12:26:59 -04:00

249 lines
8.6 KiB
Plaintext
Raw Blame History

#
# Security configuration
#
menu "Security options"
source security/keys/Kconfig
config SECURITY_DMESG_RESTRICT
bool "Restrict unprivileged access to the kernel syslog"
default n
help
This enforces restrictions on unprivileged users reading the kernel
syslog via dmesg(8).
If this option is not selected, no restrictions will be enforced
unless the dmesg_restrict sysctl is explicitly set to (1).
If you are unsure how to answer this question, answer N.
config SECURITY
bool "Enable different security models"
depends on SYSFS
depends on MULTIUSER
help
This allows you to choose different security modules to be
configured into your kernel.
If this option is not selected, the default Linux security
model will be used.
If you are unsure how to answer this question, answer N.
config SECURITY_WRITABLE_HOOKS
depends on SECURITY
bool
default n
config SECURITYFS
bool "Enable the securityfs filesystem"
help
This will build the securityfs filesystem. It is currently used by
the TPM bios character driver and IMA, an integrity provider. It is
not used by SELinux or SMACK.
If you are unsure how to answer this question, answer N.
config SECURITY_NETWORK
bool "Socket and Networking Security Hooks"
depends on SECURITY
help
This enables the socket and networking security hooks.
If enabled, a security module can use these hooks to
implement socket and networking access controls.
If you are unsure how to answer this question, answer N.
config SECURITY_INFINIBAND
bool "Infiniband Security Hooks"
depends on SECURITY && INFINIBAND
help
This enables the Infiniband security hooks.
If enabled, a security module can use these hooks to
implement Infiniband access controls.
If you are unsure how to answer this question, answer N.
config SECURITY_NETWORK_XFRM
bool "XFRM (IPSec) Networking Security Hooks"
depends on XFRM && SECURITY_NETWORK
help
This enables the XFRM (IPSec) networking security hooks.
If enabled, a security module can use these hooks to
implement per-packet access controls based on labels
derived from IPSec policy. Non-IPSec communications are
designated as unlabelled, and only sockets authorized
to communicate unlabelled data can send without using
IPSec.
If you are unsure how to answer this question, answer N.
config SECURITY_PATH
bool "Security hooks for pathname based access control"
depends on SECURITY
help
This enables the security hooks for pathname based access control.
If enabled, a security module can use these hooks to
implement pathname based access controls.
If you are unsure how to answer this question, answer N.
config INTEL_TXT
bool "Enable Intel(R) Trusted Execution Technology (Intel(R) TXT)"
depends on HAVE_INTEL_TXT
help
This option enables support for booting the kernel with the
Trusted Boot (tboot) module. This will utilize
Intel(R) Trusted Execution Technology to perform a measured launch
of the kernel. If the system does not support Intel(R) TXT, this
will have no effect.
Intel TXT will provide higher assurance of system configuration and
initial state as well as data reset protection. This is used to
create a robust initial kernel measurement and verification, which
helps to ensure that kernel security mechanisms are functioning
correctly. This level of protection requires a root of trust outside
of the kernel itself.
Intel TXT also helps solve real end user concerns about having
confidence that their hardware is running the VMM or kernel that
it was configured with, especially since they may be responsible for
providing such assurances to VMs and services running on it.
See <http://www.intel.com/technology/security/> for more information
about Intel(R) TXT.
See <http://tboot.sourceforge.net> for more information about tboot.
See Documentation/intel_txt.txt for a description of how to enable
Intel TXT support in a kernel boot.
If you are unsure as to whether this is required, answer N.
config LSM_MMAP_MIN_ADDR
int "Low address space for LSM to protect from user allocation"
depends on SECURITY && SECURITY_SELINUX
default 32768 if ARM || (ARM64 && COMPAT)
default 65536
help
This is the portion of low virtual memory which should be protected
from userspace allocation. Keeping a user from writing to low pages
can help reduce the impact of kernel NULL pointer bugs.
For most ia64, ppc64 and x86 users with lots of address space
a value of 65536 is reasonable and should cause no problems.
On arm and other archs it should not be higher than 32768.
Programs which use vm86 functionality or have some need to map
this low address space will need the permission specific to the
systems running LSM.
config HAVE_HARDENED_USERCOPY_ALLOCATOR
bool
help
The heap allocator implements __check_heap_object() for
validating memory ranges against heap object sizes in
support of CONFIG_HARDENED_USERCOPY.
config HARDENED_USERCOPY
bool "Harden memory copies between kernel and userspace"
depends on HAVE_HARDENED_USERCOPY_ALLOCATOR
select BUG
help
This option checks for obviously wrong memory regions when
copying memory to/from the kernel (via copy_to_user() and
copy_from_user() functions) by rejecting memory ranges that
are larger than the specified heap object, span multiple
separately allocated pages, are not on the process stack,
or are part of the kernel text. This kills entire classes
of heap overflow exploits and similar kernel memory exposures.
config HARDENED_USERCOPY_PAGESPAN
bool "Refuse to copy allocations that span multiple pages"
depends on HARDENED_USERCOPY
depends on EXPERT
help
When a multi-page allocation is done without __GFP_COMP,
hardened usercopy will reject attempts to copy it. There are,
however, several cases of this in the kernel that have not all
been removed. This config is intended to be used only while
trying to find such users.
config STATIC_USERMODEHELPER
bool "Force all usermode helper calls through a single binary"
help
By default, the kernel can call many different userspace
binary programs through the "usermode helper" kernel
interface. Some of these binaries are statically defined
either in the kernel code itself, or as a kernel configuration
option. However, some of these are dynamically created at
runtime, or can be modified after the kernel has started up.
To provide an additional layer of security, route all of these
calls through a single executable that can not have its name
changed.
Note, it is up to this single binary to then call the relevant
"real" usermode helper binary, based on the first argument
passed to it. If desired, this program can filter and pick
and choose what real programs are called.
If you wish for all usermode helper programs are to be
disabled, choose this option and then set
STATIC_USERMODEHELPER_PATH to an empty string.
config STATIC_USERMODEHELPER_PATH
string "Path to the static usermode helper binary"
depends on STATIC_USERMODEHELPER
default "/sbin/usermode-helper"
help
The binary called by the kernel when any usermode helper
program is wish to be run. The "real" application's name will
be in the first argument passed to this program on the command
line.
If you wish for all usermode helper programs to be disabled,
specify an empty string here (i.e. "").
source security/selinux/Kconfig
source security/smack/Kconfig
source security/tomoyo/Kconfig
source security/apparmor/Kconfig
source security/loadpin/Kconfig
source security/yama/Kconfig
source security/integrity/Kconfig
choice
prompt "Default security module"
default DEFAULT_SECURITY_SELINUX if SECURITY_SELINUX
default DEFAULT_SECURITY_SMACK if SECURITY_SMACK
default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
default DEFAULT_SECURITY_APPARMOR if SECURITY_APPARMOR
default DEFAULT_SECURITY_DAC
help
Select the security module that will be used by default if the
kernel parameter security= is not specified.
config DEFAULT_SECURITY_SELINUX
bool "SELinux" if SECURITY_SELINUX=y
config DEFAULT_SECURITY_SMACK
bool "Simplified Mandatory Access Control" if SECURITY_SMACK=y
config DEFAULT_SECURITY_TOMOYO
bool "TOMOYO" if SECURITY_TOMOYO=y
config DEFAULT_SECURITY_APPARMOR
bool "AppArmor" if SECURITY_APPARMOR=y
config DEFAULT_SECURITY_DAC
bool "Unix Discretionary Access Controls"
endchoice
config DEFAULT_SECURITY
string
default "selinux" if DEFAULT_SECURITY_SELINUX
default "smack" if DEFAULT_SECURITY_SMACK
default "tomoyo" if DEFAULT_SECURITY_TOMOYO
default "apparmor" if DEFAULT_SECURITY_APPARMOR
default "" if DEFAULT_SECURITY_DAC
endmenu
Reference in New Issue View Git Blame Copy Permalink