6865 lines
177 KiB
C
6865 lines
177 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* drxk_hard: DRX-K DVB-C/T demodulator driver
|
|
*
|
|
* Copyright (C) 2010-2011 Digital Devices GmbH
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hardirq.h>
|
|
#include <asm/div64.h>
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "drxk.h"
|
|
#include "drxk_hard.h"
|
|
#include <media/dvb_math.h>
|
|
|
|
static int power_down_dvbt(struct drxk_state *state, bool set_power_mode);
|
|
static int power_down_qam(struct drxk_state *state);
|
|
static int set_dvbt_standard(struct drxk_state *state,
|
|
enum operation_mode o_mode);
|
|
static int set_qam_standard(struct drxk_state *state,
|
|
enum operation_mode o_mode);
|
|
static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz,
|
|
s32 tuner_freq_offset);
|
|
static int set_dvbt_standard(struct drxk_state *state,
|
|
enum operation_mode o_mode);
|
|
static int dvbt_start(struct drxk_state *state);
|
|
static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
|
|
s32 tuner_freq_offset);
|
|
static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status);
|
|
static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status);
|
|
static int switch_antenna_to_qam(struct drxk_state *state);
|
|
static int switch_antenna_to_dvbt(struct drxk_state *state);
|
|
|
|
static bool is_dvbt(struct drxk_state *state)
|
|
{
|
|
return state->m_operation_mode == OM_DVBT;
|
|
}
|
|
|
|
static bool is_qam(struct drxk_state *state)
|
|
{
|
|
return state->m_operation_mode == OM_QAM_ITU_A ||
|
|
state->m_operation_mode == OM_QAM_ITU_B ||
|
|
state->m_operation_mode == OM_QAM_ITU_C;
|
|
}
|
|
|
|
#define NOA1ROM 0
|
|
|
|
#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
|
|
#define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0)
|
|
|
|
#define DEFAULT_MER_83 165
|
|
#define DEFAULT_MER_93 250
|
|
|
|
#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
|
|
#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02)
|
|
#endif
|
|
|
|
#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
|
|
#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
|
|
#endif
|
|
|
|
#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
|
|
#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
|
|
|
|
#ifndef DRXK_KI_RAGC_ATV
|
|
#define DRXK_KI_RAGC_ATV 4
|
|
#endif
|
|
#ifndef DRXK_KI_IAGC_ATV
|
|
#define DRXK_KI_IAGC_ATV 6
|
|
#endif
|
|
#ifndef DRXK_KI_DAGC_ATV
|
|
#define DRXK_KI_DAGC_ATV 7
|
|
#endif
|
|
|
|
#ifndef DRXK_KI_RAGC_QAM
|
|
#define DRXK_KI_RAGC_QAM 3
|
|
#endif
|
|
#ifndef DRXK_KI_IAGC_QAM
|
|
#define DRXK_KI_IAGC_QAM 4
|
|
#endif
|
|
#ifndef DRXK_KI_DAGC_QAM
|
|
#define DRXK_KI_DAGC_QAM 7
|
|
#endif
|
|
#ifndef DRXK_KI_RAGC_DVBT
|
|
#define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2)
|
|
#endif
|
|
#ifndef DRXK_KI_IAGC_DVBT
|
|
#define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2)
|
|
#endif
|
|
#ifndef DRXK_KI_DAGC_DVBT
|
|
#define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7)
|
|
#endif
|
|
|
|
#ifndef DRXK_AGC_DAC_OFFSET
|
|
#define DRXK_AGC_DAC_OFFSET (0x800)
|
|
#endif
|
|
|
|
#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ
|
|
#define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L)
|
|
#endif
|
|
|
|
#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ
|
|
#define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L)
|
|
#endif
|
|
|
|
#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ
|
|
#define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L)
|
|
#endif
|
|
|
|
#ifndef DRXK_QAM_SYMBOLRATE_MAX
|
|
#define DRXK_QAM_SYMBOLRATE_MAX (7233000)
|
|
#endif
|
|
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_BG 24
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40
|
|
#define DRXK_BL_ROM_OFFSET_TAPS_FM 48
|
|
#define DRXK_BL_ROM_OFFSET_UCODE 0
|
|
|
|
#define DRXK_BLC_TIMEOUT 100
|
|
|
|
#define DRXK_BLCC_NR_ELEMENTS_TAPS 2
|
|
#define DRXK_BLCC_NR_ELEMENTS_UCODE 6
|
|
|
|
#define DRXK_BLDC_NR_ELEMENTS_TAPS 28
|
|
|
|
#ifndef DRXK_OFDM_NE_NOTCH_WIDTH
|
|
#define DRXK_OFDM_NE_NOTCH_WIDTH (4)
|
|
#endif
|
|
|
|
#define DRXK_QAM_SL_SIG_POWER_QAM16 (40960)
|
|
#define DRXK_QAM_SL_SIG_POWER_QAM32 (20480)
|
|
#define DRXK_QAM_SL_SIG_POWER_QAM64 (43008)
|
|
#define DRXK_QAM_SL_SIG_POWER_QAM128 (20992)
|
|
#define DRXK_QAM_SL_SIG_POWER_QAM256 (43520)
|
|
|
|
static unsigned int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable debug messages");
|
|
|
|
#define dprintk(level, fmt, arg...) do { \
|
|
if (debug >= level) \
|
|
printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg); \
|
|
} while (0)
|
|
|
|
|
|
static inline u32 MulDiv32(u32 a, u32 b, u32 c)
|
|
{
|
|
u64 tmp64;
|
|
|
|
tmp64 = (u64) a * (u64) b;
|
|
do_div(tmp64, c);
|
|
|
|
return (u32) tmp64;
|
|
}
|
|
|
|
static inline u32 Frac28a(u32 a, u32 c)
|
|
{
|
|
int i = 0;
|
|
u32 Q1 = 0;
|
|
u32 R0 = 0;
|
|
|
|
R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */
|
|
Q1 = a / c; /*
|
|
* integer part, only the 4 least significant
|
|
* bits will be visible in the result
|
|
*/
|
|
|
|
/* division using radix 16, 7 nibbles in the result */
|
|
for (i = 0; i < 7; i++) {
|
|
Q1 = (Q1 << 4) | (R0 / c);
|
|
R0 = (R0 % c) << 4;
|
|
}
|
|
/* rounding */
|
|
if ((R0 >> 3) >= c)
|
|
Q1++;
|
|
|
|
return Q1;
|
|
}
|
|
|
|
static inline u32 log10times100(u32 value)
|
|
{
|
|
return (100L * intlog10(value)) >> 24;
|
|
}
|
|
|
|
/***************************************************************************/
|
|
/* I2C **********************************************************************/
|
|
/***************************************************************************/
|
|
|
|
static int drxk_i2c_lock(struct drxk_state *state)
|
|
{
|
|
i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
|
|
state->drxk_i2c_exclusive_lock = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void drxk_i2c_unlock(struct drxk_state *state)
|
|
{
|
|
if (!state->drxk_i2c_exclusive_lock)
|
|
return;
|
|
|
|
i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
|
|
state->drxk_i2c_exclusive_lock = false;
|
|
}
|
|
|
|
static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs,
|
|
unsigned len)
|
|
{
|
|
if (state->drxk_i2c_exclusive_lock)
|
|
return __i2c_transfer(state->i2c, msgs, len);
|
|
else
|
|
return i2c_transfer(state->i2c, msgs, len);
|
|
}
|
|
|
|
static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val)
|
|
{
|
|
struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD,
|
|
.buf = val, .len = 1}
|
|
};
|
|
|
|
return drxk_i2c_transfer(state, msgs, 1);
|
|
}
|
|
|
|
static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len)
|
|
{
|
|
int status;
|
|
struct i2c_msg msg = {
|
|
.addr = adr, .flags = 0, .buf = data, .len = len };
|
|
|
|
dprintk(3, ":");
|
|
if (debug > 2) {
|
|
int i;
|
|
for (i = 0; i < len; i++)
|
|
pr_cont(" %02x", data[i]);
|
|
pr_cont("\n");
|
|
}
|
|
status = drxk_i2c_transfer(state, &msg, 1);
|
|
if (status >= 0 && status != 1)
|
|
status = -EIO;
|
|
|
|
if (status < 0)
|
|
pr_err("i2c write error at addr 0x%02x\n", adr);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int i2c_read(struct drxk_state *state,
|
|
u8 adr, u8 *msg, int len, u8 *answ, int alen)
|
|
{
|
|
int status;
|
|
struct i2c_msg msgs[2] = {
|
|
{.addr = adr, .flags = 0,
|
|
.buf = msg, .len = len},
|
|
{.addr = adr, .flags = I2C_M_RD,
|
|
.buf = answ, .len = alen}
|
|
};
|
|
|
|
status = drxk_i2c_transfer(state, msgs, 2);
|
|
if (status != 2) {
|
|
if (debug > 2)
|
|
pr_cont(": ERROR!\n");
|
|
if (status >= 0)
|
|
status = -EIO;
|
|
|
|
pr_err("i2c read error at addr 0x%02x\n", adr);
|
|
return status;
|
|
}
|
|
if (debug > 2) {
|
|
int i;
|
|
dprintk(2, ": read from");
|
|
for (i = 0; i < len; i++)
|
|
pr_cont(" %02x", msg[i]);
|
|
pr_cont(", value = ");
|
|
for (i = 0; i < alen; i++)
|
|
pr_cont(" %02x", answ[i]);
|
|
pr_cont("\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
|
|
{
|
|
int status;
|
|
u8 adr = state->demod_address, mm1[4], mm2[2], len;
|
|
|
|
if (state->single_master)
|
|
flags |= 0xC0;
|
|
|
|
if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
|
|
mm1[0] = (((reg << 1) & 0xFF) | 0x01);
|
|
mm1[1] = ((reg >> 16) & 0xFF);
|
|
mm1[2] = ((reg >> 24) & 0xFF) | flags;
|
|
mm1[3] = ((reg >> 7) & 0xFF);
|
|
len = 4;
|
|
} else {
|
|
mm1[0] = ((reg << 1) & 0xFF);
|
|
mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
|
|
len = 2;
|
|
}
|
|
dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
|
|
status = i2c_read(state, adr, mm1, len, mm2, 2);
|
|
if (status < 0)
|
|
return status;
|
|
if (data)
|
|
*data = mm2[0] | (mm2[1] << 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read16(struct drxk_state *state, u32 reg, u16 *data)
|
|
{
|
|
return read16_flags(state, reg, data, 0);
|
|
}
|
|
|
|
static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
|
|
{
|
|
int status;
|
|
u8 adr = state->demod_address, mm1[4], mm2[4], len;
|
|
|
|
if (state->single_master)
|
|
flags |= 0xC0;
|
|
|
|
if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
|
|
mm1[0] = (((reg << 1) & 0xFF) | 0x01);
|
|
mm1[1] = ((reg >> 16) & 0xFF);
|
|
mm1[2] = ((reg >> 24) & 0xFF) | flags;
|
|
mm1[3] = ((reg >> 7) & 0xFF);
|
|
len = 4;
|
|
} else {
|
|
mm1[0] = ((reg << 1) & 0xFF);
|
|
mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
|
|
len = 2;
|
|
}
|
|
dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
|
|
status = i2c_read(state, adr, mm1, len, mm2, 4);
|
|
if (status < 0)
|
|
return status;
|
|
if (data)
|
|
*data = mm2[0] | (mm2[1] << 8) |
|
|
(mm2[2] << 16) | (mm2[3] << 24);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read32(struct drxk_state *state, u32 reg, u32 *data)
|
|
{
|
|
return read32_flags(state, reg, data, 0);
|
|
}
|
|
|
|
static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
|
|
{
|
|
u8 adr = state->demod_address, mm[6], len;
|
|
|
|
if (state->single_master)
|
|
flags |= 0xC0;
|
|
if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
|
|
mm[0] = (((reg << 1) & 0xFF) | 0x01);
|
|
mm[1] = ((reg >> 16) & 0xFF);
|
|
mm[2] = ((reg >> 24) & 0xFF) | flags;
|
|
mm[3] = ((reg >> 7) & 0xFF);
|
|
len = 4;
|
|
} else {
|
|
mm[0] = ((reg << 1) & 0xFF);
|
|
mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
|
|
len = 2;
|
|
}
|
|
mm[len] = data & 0xff;
|
|
mm[len + 1] = (data >> 8) & 0xff;
|
|
|
|
dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags);
|
|
return i2c_write(state, adr, mm, len + 2);
|
|
}
|
|
|
|
static int write16(struct drxk_state *state, u32 reg, u16 data)
|
|
{
|
|
return write16_flags(state, reg, data, 0);
|
|
}
|
|
|
|
static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
|
|
{
|
|
u8 adr = state->demod_address, mm[8], len;
|
|
|
|
if (state->single_master)
|
|
flags |= 0xC0;
|
|
if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
|
|
mm[0] = (((reg << 1) & 0xFF) | 0x01);
|
|
mm[1] = ((reg >> 16) & 0xFF);
|
|
mm[2] = ((reg >> 24) & 0xFF) | flags;
|
|
mm[3] = ((reg >> 7) & 0xFF);
|
|
len = 4;
|
|
} else {
|
|
mm[0] = ((reg << 1) & 0xFF);
|
|
mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
|
|
len = 2;
|
|
}
|
|
mm[len] = data & 0xff;
|
|
mm[len + 1] = (data >> 8) & 0xff;
|
|
mm[len + 2] = (data >> 16) & 0xff;
|
|
mm[len + 3] = (data >> 24) & 0xff;
|
|
dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags);
|
|
|
|
return i2c_write(state, adr, mm, len + 4);
|
|
}
|
|
|
|
static int write32(struct drxk_state *state, u32 reg, u32 data)
|
|
{
|
|
return write32_flags(state, reg, data, 0);
|
|
}
|
|
|
|
static int write_block(struct drxk_state *state, u32 address,
|
|
const int block_size, const u8 p_block[])
|
|
{
|
|
int status = 0, blk_size = block_size;
|
|
u8 flags = 0;
|
|
|
|
if (state->single_master)
|
|
flags |= 0xC0;
|
|
|
|
while (blk_size > 0) {
|
|
int chunk = blk_size > state->m_chunk_size ?
|
|
state->m_chunk_size : blk_size;
|
|
u8 *adr_buf = &state->chunk[0];
|
|
u32 adr_length = 0;
|
|
|
|
if (DRXDAP_FASI_LONG_FORMAT(address) || (flags != 0)) {
|
|
adr_buf[0] = (((address << 1) & 0xFF) | 0x01);
|
|
adr_buf[1] = ((address >> 16) & 0xFF);
|
|
adr_buf[2] = ((address >> 24) & 0xFF);
|
|
adr_buf[3] = ((address >> 7) & 0xFF);
|
|
adr_buf[2] |= flags;
|
|
adr_length = 4;
|
|
if (chunk == state->m_chunk_size)
|
|
chunk -= 2;
|
|
} else {
|
|
adr_buf[0] = ((address << 1) & 0xFF);
|
|
adr_buf[1] = (((address >> 16) & 0x0F) |
|
|
((address >> 18) & 0xF0));
|
|
adr_length = 2;
|
|
}
|
|
memcpy(&state->chunk[adr_length], p_block, chunk);
|
|
dprintk(2, "(0x%08x, 0x%02x)\n", address, flags);
|
|
if (debug > 1) {
|
|
int i;
|
|
if (p_block)
|
|
for (i = 0; i < chunk; i++)
|
|
pr_cont(" %02x", p_block[i]);
|
|
pr_cont("\n");
|
|
}
|
|
status = i2c_write(state, state->demod_address,
|
|
&state->chunk[0], chunk + adr_length);
|
|
if (status < 0) {
|
|
pr_err("%s: i2c write error at addr 0x%02x\n",
|
|
__func__, address);
|
|
break;
|
|
}
|
|
p_block += chunk;
|
|
address += (chunk >> 1);
|
|
blk_size -= chunk;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
#ifndef DRXK_MAX_RETRIES_POWERUP
|
|
#define DRXK_MAX_RETRIES_POWERUP 20
|
|
#endif
|
|
|
|
static int power_up_device(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
u8 data = 0;
|
|
u16 retry_count = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
status = i2c_read1(state, state->demod_address, &data);
|
|
if (status < 0) {
|
|
do {
|
|
data = 0;
|
|
status = i2c_write(state, state->demod_address,
|
|
&data, 1);
|
|
usleep_range(10000, 11000);
|
|
retry_count++;
|
|
if (status < 0)
|
|
continue;
|
|
status = i2c_read1(state, state->demod_address,
|
|
&data);
|
|
} while (status < 0 &&
|
|
(retry_count < DRXK_MAX_RETRIES_POWERUP));
|
|
if (status < 0 && retry_count >= DRXK_MAX_RETRIES_POWERUP)
|
|
goto error;
|
|
}
|
|
|
|
/* Make sure all clk domains are active */
|
|
status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Enable pll lock tests */
|
|
status = write16(state, SIO_CC_PLL_LOCK__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
state->m_current_power_mode = DRX_POWER_UP;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
static int init_state(struct drxk_state *state)
|
|
{
|
|
/*
|
|
* FIXME: most (all?) of the values below should be moved into
|
|
* struct drxk_config, as they are probably board-specific
|
|
*/
|
|
u32 ul_vsb_if_agc_mode = DRXK_AGC_CTRL_AUTO;
|
|
u32 ul_vsb_if_agc_output_level = 0;
|
|
u32 ul_vsb_if_agc_min_level = 0;
|
|
u32 ul_vsb_if_agc_max_level = 0x7FFF;
|
|
u32 ul_vsb_if_agc_speed = 3;
|
|
|
|
u32 ul_vsb_rf_agc_mode = DRXK_AGC_CTRL_AUTO;
|
|
u32 ul_vsb_rf_agc_output_level = 0;
|
|
u32 ul_vsb_rf_agc_min_level = 0;
|
|
u32 ul_vsb_rf_agc_max_level = 0x7FFF;
|
|
u32 ul_vsb_rf_agc_speed = 3;
|
|
u32 ul_vsb_rf_agc_top = 9500;
|
|
u32 ul_vsb_rf_agc_cut_off_current = 4000;
|
|
|
|
u32 ul_atv_if_agc_mode = DRXK_AGC_CTRL_AUTO;
|
|
u32 ul_atv_if_agc_output_level = 0;
|
|
u32 ul_atv_if_agc_min_level = 0;
|
|
u32 ul_atv_if_agc_max_level = 0;
|
|
u32 ul_atv_if_agc_speed = 3;
|
|
|
|
u32 ul_atv_rf_agc_mode = DRXK_AGC_CTRL_OFF;
|
|
u32 ul_atv_rf_agc_output_level = 0;
|
|
u32 ul_atv_rf_agc_min_level = 0;
|
|
u32 ul_atv_rf_agc_max_level = 0;
|
|
u32 ul_atv_rf_agc_top = 9500;
|
|
u32 ul_atv_rf_agc_cut_off_current = 4000;
|
|
u32 ul_atv_rf_agc_speed = 3;
|
|
|
|
u32 ulQual83 = DEFAULT_MER_83;
|
|
u32 ulQual93 = DEFAULT_MER_93;
|
|
|
|
u32 ul_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
|
|
u32 ul_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
|
|
|
|
/* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */
|
|
/* io_pad_cfg_mode output mode is drive always */
|
|
/* io_pad_cfg_drive is set to power 2 (23 mA) */
|
|
u32 ul_gpio_cfg = 0x0113;
|
|
u32 ul_invert_ts_clock = 0;
|
|
u32 ul_ts_data_strength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
|
|
u32 ul_dvbt_bitrate = 50000000;
|
|
u32 ul_dvbc_bitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
|
|
|
|
u32 ul_insert_rs_byte = 0;
|
|
|
|
u32 ul_rf_mirror = 1;
|
|
u32 ul_power_down = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
state->m_has_lna = false;
|
|
state->m_has_dvbt = false;
|
|
state->m_has_dvbc = false;
|
|
state->m_has_atv = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_audio = false;
|
|
|
|
if (!state->m_chunk_size)
|
|
state->m_chunk_size = 124;
|
|
|
|
state->m_osc_clock_freq = 0;
|
|
state->m_smart_ant_inverted = false;
|
|
state->m_b_p_down_open_bridge = false;
|
|
|
|
/* real system clock frequency in kHz */
|
|
state->m_sys_clock_freq = 151875;
|
|
/* Timing div, 250ns/Psys */
|
|
/* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */
|
|
state->m_hi_cfg_timing_div = ((state->m_sys_clock_freq / 1000) *
|
|
HI_I2C_DELAY) / 1000;
|
|
/* Clipping */
|
|
if (state->m_hi_cfg_timing_div > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
|
|
state->m_hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
|
|
state->m_hi_cfg_wake_up_key = (state->demod_address << 1);
|
|
/* port/bridge/power down ctrl */
|
|
state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
|
|
|
|
state->m_b_power_down = (ul_power_down != 0);
|
|
|
|
state->m_drxk_a3_patch_code = false;
|
|
|
|
/* Init AGC and PGA parameters */
|
|
/* VSB IF */
|
|
state->m_vsb_if_agc_cfg.ctrl_mode = ul_vsb_if_agc_mode;
|
|
state->m_vsb_if_agc_cfg.output_level = ul_vsb_if_agc_output_level;
|
|
state->m_vsb_if_agc_cfg.min_output_level = ul_vsb_if_agc_min_level;
|
|
state->m_vsb_if_agc_cfg.max_output_level = ul_vsb_if_agc_max_level;
|
|
state->m_vsb_if_agc_cfg.speed = ul_vsb_if_agc_speed;
|
|
state->m_vsb_pga_cfg = 140;
|
|
|
|
/* VSB RF */
|
|
state->m_vsb_rf_agc_cfg.ctrl_mode = ul_vsb_rf_agc_mode;
|
|
state->m_vsb_rf_agc_cfg.output_level = ul_vsb_rf_agc_output_level;
|
|
state->m_vsb_rf_agc_cfg.min_output_level = ul_vsb_rf_agc_min_level;
|
|
state->m_vsb_rf_agc_cfg.max_output_level = ul_vsb_rf_agc_max_level;
|
|
state->m_vsb_rf_agc_cfg.speed = ul_vsb_rf_agc_speed;
|
|
state->m_vsb_rf_agc_cfg.top = ul_vsb_rf_agc_top;
|
|
state->m_vsb_rf_agc_cfg.cut_off_current = ul_vsb_rf_agc_cut_off_current;
|
|
state->m_vsb_pre_saw_cfg.reference = 0x07;
|
|
state->m_vsb_pre_saw_cfg.use_pre_saw = true;
|
|
|
|
state->m_Quality83percent = DEFAULT_MER_83;
|
|
state->m_Quality93percent = DEFAULT_MER_93;
|
|
if (ulQual93 <= 500 && ulQual83 < ulQual93) {
|
|
state->m_Quality83percent = ulQual83;
|
|
state->m_Quality93percent = ulQual93;
|
|
}
|
|
|
|
/* ATV IF */
|
|
state->m_atv_if_agc_cfg.ctrl_mode = ul_atv_if_agc_mode;
|
|
state->m_atv_if_agc_cfg.output_level = ul_atv_if_agc_output_level;
|
|
state->m_atv_if_agc_cfg.min_output_level = ul_atv_if_agc_min_level;
|
|
state->m_atv_if_agc_cfg.max_output_level = ul_atv_if_agc_max_level;
|
|
state->m_atv_if_agc_cfg.speed = ul_atv_if_agc_speed;
|
|
|
|
/* ATV RF */
|
|
state->m_atv_rf_agc_cfg.ctrl_mode = ul_atv_rf_agc_mode;
|
|
state->m_atv_rf_agc_cfg.output_level = ul_atv_rf_agc_output_level;
|
|
state->m_atv_rf_agc_cfg.min_output_level = ul_atv_rf_agc_min_level;
|
|
state->m_atv_rf_agc_cfg.max_output_level = ul_atv_rf_agc_max_level;
|
|
state->m_atv_rf_agc_cfg.speed = ul_atv_rf_agc_speed;
|
|
state->m_atv_rf_agc_cfg.top = ul_atv_rf_agc_top;
|
|
state->m_atv_rf_agc_cfg.cut_off_current = ul_atv_rf_agc_cut_off_current;
|
|
state->m_atv_pre_saw_cfg.reference = 0x04;
|
|
state->m_atv_pre_saw_cfg.use_pre_saw = true;
|
|
|
|
|
|
/* DVBT RF */
|
|
state->m_dvbt_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF;
|
|
state->m_dvbt_rf_agc_cfg.output_level = 0;
|
|
state->m_dvbt_rf_agc_cfg.min_output_level = 0;
|
|
state->m_dvbt_rf_agc_cfg.max_output_level = 0xFFFF;
|
|
state->m_dvbt_rf_agc_cfg.top = 0x2100;
|
|
state->m_dvbt_rf_agc_cfg.cut_off_current = 4000;
|
|
state->m_dvbt_rf_agc_cfg.speed = 1;
|
|
|
|
|
|
/* DVBT IF */
|
|
state->m_dvbt_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO;
|
|
state->m_dvbt_if_agc_cfg.output_level = 0;
|
|
state->m_dvbt_if_agc_cfg.min_output_level = 0;
|
|
state->m_dvbt_if_agc_cfg.max_output_level = 9000;
|
|
state->m_dvbt_if_agc_cfg.top = 13424;
|
|
state->m_dvbt_if_agc_cfg.cut_off_current = 0;
|
|
state->m_dvbt_if_agc_cfg.speed = 3;
|
|
state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay = 30;
|
|
state->m_dvbt_if_agc_cfg.ingain_tgt_max = 30000;
|
|
/* state->m_dvbtPgaCfg = 140; */
|
|
|
|
state->m_dvbt_pre_saw_cfg.reference = 4;
|
|
state->m_dvbt_pre_saw_cfg.use_pre_saw = false;
|
|
|
|
/* QAM RF */
|
|
state->m_qam_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF;
|
|
state->m_qam_rf_agc_cfg.output_level = 0;
|
|
state->m_qam_rf_agc_cfg.min_output_level = 6023;
|
|
state->m_qam_rf_agc_cfg.max_output_level = 27000;
|
|
state->m_qam_rf_agc_cfg.top = 0x2380;
|
|
state->m_qam_rf_agc_cfg.cut_off_current = 4000;
|
|
state->m_qam_rf_agc_cfg.speed = 3;
|
|
|
|
/* QAM IF */
|
|
state->m_qam_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO;
|
|
state->m_qam_if_agc_cfg.output_level = 0;
|
|
state->m_qam_if_agc_cfg.min_output_level = 0;
|
|
state->m_qam_if_agc_cfg.max_output_level = 9000;
|
|
state->m_qam_if_agc_cfg.top = 0x0511;
|
|
state->m_qam_if_agc_cfg.cut_off_current = 0;
|
|
state->m_qam_if_agc_cfg.speed = 3;
|
|
state->m_qam_if_agc_cfg.ingain_tgt_max = 5119;
|
|
state->m_qam_if_agc_cfg.fast_clip_ctrl_delay = 50;
|
|
|
|
state->m_qam_pga_cfg = 140;
|
|
state->m_qam_pre_saw_cfg.reference = 4;
|
|
state->m_qam_pre_saw_cfg.use_pre_saw = false;
|
|
|
|
state->m_operation_mode = OM_NONE;
|
|
state->m_drxk_state = DRXK_UNINITIALIZED;
|
|
|
|
/* MPEG output configuration */
|
|
state->m_enable_mpeg_output = true; /* If TRUE; enable MPEG output */
|
|
state->m_insert_rs_byte = false; /* If TRUE; insert RS byte */
|
|
state->m_invert_data = false; /* If TRUE; invert DATA signals */
|
|
state->m_invert_err = false; /* If TRUE; invert ERR signal */
|
|
state->m_invert_str = false; /* If TRUE; invert STR signals */
|
|
state->m_invert_val = false; /* If TRUE; invert VAL signals */
|
|
state->m_invert_clk = (ul_invert_ts_clock != 0); /* If TRUE; invert CLK signals */
|
|
|
|
/* If TRUE; static MPEG clockrate will be used;
|
|
otherwise clockrate will adapt to the bitrate of the TS */
|
|
|
|
state->m_dvbt_bitrate = ul_dvbt_bitrate;
|
|
state->m_dvbc_bitrate = ul_dvbc_bitrate;
|
|
|
|
state->m_ts_data_strength = (ul_ts_data_strength & 0x07);
|
|
|
|
/* Maximum bitrate in b/s in case static clockrate is selected */
|
|
state->m_mpeg_ts_static_bitrate = 19392658;
|
|
state->m_disable_te_ihandling = false;
|
|
|
|
if (ul_insert_rs_byte)
|
|
state->m_insert_rs_byte = true;
|
|
|
|
state->m_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
|
|
if (ul_mpeg_lock_time_out < 10000)
|
|
state->m_mpeg_lock_time_out = ul_mpeg_lock_time_out;
|
|
state->m_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
|
|
if (ul_demod_lock_time_out < 10000)
|
|
state->m_demod_lock_time_out = ul_demod_lock_time_out;
|
|
|
|
/* QAM defaults */
|
|
state->m_constellation = DRX_CONSTELLATION_AUTO;
|
|
state->m_qam_interleave_mode = DRXK_QAM_I12_J17;
|
|
state->m_fec_rs_plen = 204 * 8; /* fecRsPlen annex A */
|
|
state->m_fec_rs_prescale = 1;
|
|
|
|
state->m_sqi_speed = DRXK_DVBT_SQI_SPEED_MEDIUM;
|
|
state->m_agcfast_clip_ctrl_delay = 0;
|
|
|
|
state->m_gpio_cfg = ul_gpio_cfg;
|
|
|
|
state->m_b_power_down = false;
|
|
state->m_current_power_mode = DRX_POWER_DOWN;
|
|
|
|
state->m_rfmirror = (ul_rf_mirror == 0);
|
|
state->m_if_agc_pol = false;
|
|
return 0;
|
|
}
|
|
|
|
static int drxx_open(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
u32 jtag = 0;
|
|
u16 bid = 0;
|
|
u16 key = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* stop lock indicator process */
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Check device id */
|
|
status = read16(state, SIO_TOP_COMM_KEY__A, &key);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, key);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int get_device_capabilities(struct drxk_state *state)
|
|
{
|
|
u16 sio_pdr_ohw_cfg = 0;
|
|
u32 sio_top_jtagid_lo = 0;
|
|
int status;
|
|
const char *spin = "";
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* driver 0.9.0 */
|
|
/* stop lock indicator process */
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
|
|
case 0:
|
|
/* ignore (bypass ?) */
|
|
break;
|
|
case 1:
|
|
/* 27 MHz */
|
|
state->m_osc_clock_freq = 27000;
|
|
break;
|
|
case 2:
|
|
/* 20.25 MHz */
|
|
state->m_osc_clock_freq = 20250;
|
|
break;
|
|
case 3:
|
|
/* 4 MHz */
|
|
state->m_osc_clock_freq = 20250;
|
|
break;
|
|
default:
|
|
pr_err("Clock Frequency is unknown\n");
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
Determine device capabilities
|
|
Based on pinning v14
|
|
*/
|
|
status = read32(state, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
pr_info("status = 0x%08x\n", sio_top_jtagid_lo);
|
|
|
|
/* driver 0.9.0 */
|
|
switch ((sio_top_jtagid_lo >> 29) & 0xF) {
|
|
case 0:
|
|
state->m_device_spin = DRXK_SPIN_A1;
|
|
spin = "A1";
|
|
break;
|
|
case 2:
|
|
state->m_device_spin = DRXK_SPIN_A2;
|
|
spin = "A2";
|
|
break;
|
|
case 3:
|
|
state->m_device_spin = DRXK_SPIN_A3;
|
|
spin = "A3";
|
|
break;
|
|
default:
|
|
state->m_device_spin = DRXK_SPIN_UNKNOWN;
|
|
status = -EINVAL;
|
|
pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF);
|
|
goto error2;
|
|
}
|
|
switch ((sio_top_jtagid_lo >> 12) & 0xFF) {
|
|
case 0x13:
|
|
/* typeId = DRX3913K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = false;
|
|
state->m_has_audio = false;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = true;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = false;
|
|
state->m_has_gpio1 = false;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x15:
|
|
/* typeId = DRX3915K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = false;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = false;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x16:
|
|
/* typeId = DRX3916K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = false;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = false;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x18:
|
|
/* typeId = DRX3918K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = true;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = false;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x21:
|
|
/* typeId = DRX3921K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = true;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = true;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x23:
|
|
/* typeId = DRX3923K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = true;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = true;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x25:
|
|
/* typeId = DRX3925K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = true;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = true;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
case 0x26:
|
|
/* typeId = DRX3926K_TYPE_ID */
|
|
state->m_has_lna = false;
|
|
state->m_has_oob = false;
|
|
state->m_has_atv = true;
|
|
state->m_has_audio = false;
|
|
state->m_has_dvbt = true;
|
|
state->m_has_dvbc = true;
|
|
state->m_has_sawsw = true;
|
|
state->m_has_gpio2 = true;
|
|
state->m_has_gpio1 = true;
|
|
state->m_has_irqn = false;
|
|
break;
|
|
default:
|
|
pr_err("DeviceID 0x%02x not supported\n",
|
|
((sio_top_jtagid_lo >> 12) & 0xFF));
|
|
status = -EINVAL;
|
|
goto error2;
|
|
}
|
|
|
|
pr_info("detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n",
|
|
((sio_top_jtagid_lo >> 12) & 0xFF), spin,
|
|
state->m_osc_clock_freq / 1000,
|
|
state->m_osc_clock_freq % 1000);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
error2:
|
|
return status;
|
|
}
|
|
|
|
static int hi_command(struct drxk_state *state, u16 cmd, u16 *p_result)
|
|
{
|
|
int status;
|
|
bool powerdown_cmd;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Write command */
|
|
status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd);
|
|
if (status < 0)
|
|
goto error;
|
|
if (cmd == SIO_HI_RA_RAM_CMD_RESET)
|
|
usleep_range(1000, 2000);
|
|
|
|
powerdown_cmd =
|
|
(bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
|
|
((state->m_hi_cfg_ctrl) &
|
|
SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) ==
|
|
SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ);
|
|
if (!powerdown_cmd) {
|
|
/* Wait until command rdy */
|
|
u32 retry_count = 0;
|
|
u16 wait_cmd;
|
|
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
retry_count += 1;
|
|
status = read16(state, SIO_HI_RA_RAM_CMD__A,
|
|
&wait_cmd);
|
|
} while ((status < 0) && (retry_count < DRXK_MAX_RETRIES)
|
|
&& (wait_cmd != 0));
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, SIO_HI_RA_RAM_RES__A, p_result);
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int hi_cfg_command(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_6__A,
|
|
state->m_hi_cfg_timeout);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_5__A,
|
|
state->m_hi_cfg_ctrl);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_4__A,
|
|
state->m_hi_cfg_wake_up_key);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_3__A,
|
|
state->m_hi_cfg_bridge_delay);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
|
|
state->m_hi_cfg_timing_div);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_1__A,
|
|
SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
status = hi_command(state, SIO_HI_RA_RAM_CMD_CONFIG, NULL);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
state->m_hi_cfg_ctrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
|
|
error:
|
|
mutex_unlock(&state->mutex);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int init_hi(struct drxk_state *state)
|
|
{
|
|
dprintk(1, "\n");
|
|
|
|
state->m_hi_cfg_wake_up_key = (state->demod_address << 1);
|
|
state->m_hi_cfg_timeout = 0x96FF;
|
|
/* port/bridge/power down ctrl */
|
|
state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
|
|
|
|
return hi_cfg_command(state);
|
|
}
|
|
|
|
static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
|
|
{
|
|
int status = -1;
|
|
u16 sio_pdr_mclk_cfg = 0;
|
|
u16 sio_pdr_mdx_cfg = 0;
|
|
u16 err_cfg = 0;
|
|
|
|
dprintk(1, ": mpeg %s, %s mode\n",
|
|
mpeg_enable ? "enable" : "disable",
|
|
state->m_enable_parallel ? "parallel" : "serial");
|
|
|
|
/* stop lock indicator process */
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* MPEG TS pad configuration */
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (!mpeg_enable) {
|
|
/* Set MPEG TS pads to inputmode */
|
|
status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
} else {
|
|
/* Enable MPEG output */
|
|
sio_pdr_mdx_cfg =
|
|
((state->m_ts_data_strength <<
|
|
SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003);
|
|
sio_pdr_mclk_cfg = ((state->m_ts_clockk_strength <<
|
|
SIO_PDR_MCLK_CFG_DRIVE__B) |
|
|
0x0003);
|
|
|
|
status = write16(state, SIO_PDR_MSTRT_CFG__A, sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (state->enable_merr_cfg)
|
|
err_cfg = sio_pdr_mdx_cfg;
|
|
|
|
status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (state->m_enable_parallel) {
|
|
/* parallel -> enable MD1 to MD7 */
|
|
status = write16(state, SIO_PDR_MD1_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD2_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD3_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD4_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD5_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD6_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD7_CFG__A,
|
|
sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
} else {
|
|
sio_pdr_mdx_cfg = ((state->m_ts_data_strength <<
|
|
SIO_PDR_MD0_CFG_DRIVE__B)
|
|
| 0x0003);
|
|
/* serial -> disable MD1 to MD7 */
|
|
status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
status = write16(state, SIO_PDR_MCLK_CFG__A, sio_pdr_mclk_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_PDR_MD0_CFG__A, sio_pdr_mdx_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
/* Enable MB output over MPEG pads and ctl input */
|
|
status = write16(state, SIO_PDR_MON_CFG__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Write nomagic word to enable pdr reg write */
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_disable(struct drxk_state *state)
|
|
{
|
|
dprintk(1, "\n");
|
|
|
|
return mpegts_configure_pins(state, false);
|
|
}
|
|
|
|
static int bl_chain_cmd(struct drxk_state *state,
|
|
u16 rom_offset, u16 nr_of_elements, u32 time_out)
|
|
{
|
|
u16 bl_status = 0;
|
|
int status;
|
|
unsigned long end;
|
|
|
|
dprintk(1, "\n");
|
|
mutex_lock(&state->mutex);
|
|
status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_CHAIN_ADDR__A, rom_offset);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_CHAIN_LEN__A, nr_of_elements);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
end = jiffies + msecs_to_jiffies(time_out);
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
status = read16(state, SIO_BL_STATUS__A, &bl_status);
|
|
if (status < 0)
|
|
goto error;
|
|
} while ((bl_status == 0x1) &&
|
|
((time_is_after_jiffies(end))));
|
|
|
|
if (bl_status == 0x1) {
|
|
pr_err("SIO not ready\n");
|
|
status = -EINVAL;
|
|
goto error2;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
error2:
|
|
mutex_unlock(&state->mutex);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int download_microcode(struct drxk_state *state,
|
|
const u8 p_mc_image[], u32 length)
|
|
{
|
|
const u8 *p_src = p_mc_image;
|
|
u32 address;
|
|
u16 n_blocks;
|
|
u16 block_size;
|
|
u32 offset = 0;
|
|
u32 i;
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* down the drain (we don't care about MAGIC_WORD) */
|
|
#if 0
|
|
/* For future reference */
|
|
drain = (p_src[0] << 8) | p_src[1];
|
|
#endif
|
|
p_src += sizeof(u16);
|
|
offset += sizeof(u16);
|
|
n_blocks = (p_src[0] << 8) | p_src[1];
|
|
p_src += sizeof(u16);
|
|
offset += sizeof(u16);
|
|
|
|
for (i = 0; i < n_blocks; i += 1) {
|
|
address = (p_src[0] << 24) | (p_src[1] << 16) |
|
|
(p_src[2] << 8) | p_src[3];
|
|
p_src += sizeof(u32);
|
|
offset += sizeof(u32);
|
|
|
|
block_size = ((p_src[0] << 8) | p_src[1]) * sizeof(u16);
|
|
p_src += sizeof(u16);
|
|
offset += sizeof(u16);
|
|
|
|
#if 0
|
|
/* For future reference */
|
|
flags = (p_src[0] << 8) | p_src[1];
|
|
#endif
|
|
p_src += sizeof(u16);
|
|
offset += sizeof(u16);
|
|
|
|
#if 0
|
|
/* For future reference */
|
|
block_crc = (p_src[0] << 8) | p_src[1];
|
|
#endif
|
|
p_src += sizeof(u16);
|
|
offset += sizeof(u16);
|
|
|
|
if (offset + block_size > length) {
|
|
pr_err("Firmware is corrupted.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
status = write_block(state, address, block_size, p_src);
|
|
if (status < 0) {
|
|
pr_err("Error %d while loading firmware\n", status);
|
|
break;
|
|
}
|
|
p_src += block_size;
|
|
offset += block_size;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int dvbt_enable_ofdm_token_ring(struct drxk_state *state, bool enable)
|
|
{
|
|
int status;
|
|
u16 data = 0;
|
|
u16 desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON;
|
|
u16 desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED;
|
|
unsigned long end;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (!enable) {
|
|
desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF;
|
|
desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN;
|
|
}
|
|
|
|
status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
|
|
if (status >= 0 && data == desired_status) {
|
|
/* tokenring already has correct status */
|
|
return status;
|
|
}
|
|
/* Disable/enable dvbt tokenring bridge */
|
|
status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desired_ctrl);
|
|
|
|
end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT);
|
|
do {
|
|
status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
|
|
if ((status >= 0 && data == desired_status)
|
|
|| time_is_after_jiffies(end))
|
|
break;
|
|
usleep_range(1000, 2000);
|
|
} while (1);
|
|
if (data != desired_status) {
|
|
pr_err("SIO not ready\n");
|
|
return -EINVAL;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_stop(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
u16 fec_oc_snc_mode = 0;
|
|
u16 fec_oc_ipr_mode = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Graceful shutdown (byte boundaries) */
|
|
status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
fec_oc_snc_mode |= FEC_OC_SNC_MODE_SHUTDOWN__M;
|
|
status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Suppress MCLK during absence of data */
|
|
status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
fec_oc_ipr_mode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M;
|
|
status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int scu_command(struct drxk_state *state,
|
|
u16 cmd, u8 parameter_len,
|
|
u16 *parameter, u8 result_len, u16 *result)
|
|
{
|
|
#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15
|
|
#error DRXK register mapping no longer compatible with this routine!
|
|
#endif
|
|
u16 cur_cmd = 0;
|
|
int status = -EINVAL;
|
|
unsigned long end;
|
|
u8 buffer[34];
|
|
int cnt = 0, ii;
|
|
const char *p;
|
|
char errname[30];
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if ((cmd == 0) || ((parameter_len > 0) && (parameter == NULL)) ||
|
|
((result_len > 0) && (result == NULL))) {
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
/* assume that the command register is ready
|
|
since it is checked afterwards */
|
|
if (parameter) {
|
|
for (ii = parameter_len - 1; ii >= 0; ii -= 1) {
|
|
buffer[cnt++] = (parameter[ii] & 0xFF);
|
|
buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF);
|
|
}
|
|
}
|
|
buffer[cnt++] = (cmd & 0xFF);
|
|
buffer[cnt++] = ((cmd >> 8) & 0xFF);
|
|
|
|
write_block(state, SCU_RAM_PARAM_0__A -
|
|
(parameter_len - 1), cnt, buffer);
|
|
/* Wait until SCU has processed command */
|
|
end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME);
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
status = read16(state, SCU_RAM_COMMAND__A, &cur_cmd);
|
|
if (status < 0)
|
|
goto error;
|
|
} while (!(cur_cmd == DRX_SCU_READY) && (time_is_after_jiffies(end)));
|
|
if (cur_cmd != DRX_SCU_READY) {
|
|
pr_err("SCU not ready\n");
|
|
status = -EIO;
|
|
goto error2;
|
|
}
|
|
/* read results */
|
|
if ((result_len > 0) && (result != NULL)) {
|
|
s16 err;
|
|
int ii;
|
|
|
|
for (ii = result_len - 1; ii >= 0; ii -= 1) {
|
|
status = read16(state, SCU_RAM_PARAM_0__A - ii,
|
|
&result[ii]);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* Check if an error was reported by SCU */
|
|
err = (s16)result[0];
|
|
if (err >= 0)
|
|
goto error;
|
|
|
|
/* check for the known error codes */
|
|
switch (err) {
|
|
case SCU_RESULT_UNKCMD:
|
|
p = "SCU_RESULT_UNKCMD";
|
|
break;
|
|
case SCU_RESULT_UNKSTD:
|
|
p = "SCU_RESULT_UNKSTD";
|
|
break;
|
|
case SCU_RESULT_SIZE:
|
|
p = "SCU_RESULT_SIZE";
|
|
break;
|
|
case SCU_RESULT_INVPAR:
|
|
p = "SCU_RESULT_INVPAR";
|
|
break;
|
|
default: /* Other negative values are errors */
|
|
sprintf(errname, "ERROR: %d\n", err);
|
|
p = errname;
|
|
}
|
|
pr_err("%s while sending cmd 0x%04x with params:", p, cmd);
|
|
print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt);
|
|
status = -EINVAL;
|
|
goto error2;
|
|
}
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
error2:
|
|
mutex_unlock(&state->mutex);
|
|
return status;
|
|
}
|
|
|
|
static int set_iqm_af(struct drxk_state *state, bool active)
|
|
{
|
|
u16 data = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Configure IQM */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (!active) {
|
|
data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY
|
|
| IQM_AF_STDBY_STDBY_AMP_STANDBY
|
|
| IQM_AF_STDBY_STDBY_PD_STANDBY
|
|
| IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY
|
|
| IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY);
|
|
} else {
|
|
data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY)
|
|
& (~IQM_AF_STDBY_STDBY_AMP_STANDBY)
|
|
& (~IQM_AF_STDBY_STDBY_PD_STANDBY)
|
|
& (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY)
|
|
& (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY)
|
|
);
|
|
}
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int ctrl_power_mode(struct drxk_state *state, enum drx_power_mode *mode)
|
|
{
|
|
int status = 0;
|
|
u16 sio_cc_pwd_mode = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Check arguments */
|
|
if (mode == NULL)
|
|
return -EINVAL;
|
|
|
|
switch (*mode) {
|
|
case DRX_POWER_UP:
|
|
sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE;
|
|
break;
|
|
case DRXK_POWER_DOWN_OFDM:
|
|
sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OFDM;
|
|
break;
|
|
case DRXK_POWER_DOWN_CORE:
|
|
sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK;
|
|
break;
|
|
case DRXK_POWER_DOWN_PLL:
|
|
sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL;
|
|
break;
|
|
case DRX_POWER_DOWN:
|
|
sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC;
|
|
break;
|
|
default:
|
|
/* Unknow sleep mode */
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If already in requested power mode, do nothing */
|
|
if (state->m_current_power_mode == *mode)
|
|
return 0;
|
|
|
|
/* For next steps make sure to start from DRX_POWER_UP mode */
|
|
if (state->m_current_power_mode != DRX_POWER_UP) {
|
|
status = power_up_device(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = dvbt_enable_ofdm_token_ring(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
if (*mode == DRX_POWER_UP) {
|
|
/* Restore analog & pin configuration */
|
|
} else {
|
|
/* Power down to requested mode */
|
|
/* Backup some register settings */
|
|
/* Set pins with possible pull-ups connected
|
|
to them in input mode */
|
|
/* Analog power down */
|
|
/* ADC power down */
|
|
/* Power down device */
|
|
/* stop all comm_exec */
|
|
/* Stop and power down previous standard */
|
|
switch (state->m_operation_mode) {
|
|
case OM_DVBT:
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = power_down_dvbt(state, false);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
case OM_QAM_ITU_A:
|
|
case OM_QAM_ITU_C:
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = power_down_qam(state);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
status = dvbt_enable_ofdm_token_ring(state, false);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (*mode != DRXK_POWER_DOWN_OFDM) {
|
|
state->m_hi_cfg_ctrl |=
|
|
SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
|
|
status = hi_cfg_command(state);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
}
|
|
state->m_current_power_mode = *mode;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int power_down_dvbt(struct drxk_state *state, bool set_power_mode)
|
|
{
|
|
enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
|
|
u16 cmd_result = 0;
|
|
u16 data = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
status = read16(state, SCU_COMM_EXEC__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
if (data == SCU_COMM_EXEC_ACTIVE) {
|
|
/* Send OFDM stop command */
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_STOP,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Send OFDM reset command */
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_RESET,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* Reset datapath for OFDM, processors first */
|
|
status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* powerdown AFE */
|
|
status = set_iqm_af(state, false);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* powerdown to OFDM mode */
|
|
if (set_power_mode) {
|
|
status = ctrl_power_mode(state, &power_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int setoperation_mode(struct drxk_state *state,
|
|
enum operation_mode o_mode)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/*
|
|
Stop and power down previous standard
|
|
TODO investigate total power down instead of partial
|
|
power down depending on "previous" standard.
|
|
*/
|
|
|
|
/* disable HW lock indicator */
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Device is already at the required mode */
|
|
if (state->m_operation_mode == o_mode)
|
|
return 0;
|
|
|
|
switch (state->m_operation_mode) {
|
|
/* OM_NONE was added for start up */
|
|
case OM_NONE:
|
|
break;
|
|
case OM_DVBT:
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = power_down_dvbt(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_operation_mode = OM_NONE;
|
|
break;
|
|
case OM_QAM_ITU_A: /* fallthrough */
|
|
case OM_QAM_ITU_C:
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = power_down_qam(state);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_operation_mode = OM_NONE;
|
|
break;
|
|
case OM_QAM_ITU_B:
|
|
default:
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/*
|
|
Power up new standard
|
|
*/
|
|
switch (o_mode) {
|
|
case OM_DVBT:
|
|
dprintk(1, ": DVB-T\n");
|
|
state->m_operation_mode = o_mode;
|
|
status = set_dvbt_standard(state, o_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
case OM_QAM_ITU_A: /* fallthrough */
|
|
case OM_QAM_ITU_C:
|
|
dprintk(1, ": DVB-C Annex %c\n",
|
|
(state->m_operation_mode == OM_QAM_ITU_A) ? 'A' : 'C');
|
|
state->m_operation_mode = o_mode;
|
|
status = set_qam_standard(state, o_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
case OM_QAM_ITU_B:
|
|
default:
|
|
status = -EINVAL;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int start(struct drxk_state *state, s32 offset_freq,
|
|
s32 intermediate_frequency)
|
|
{
|
|
int status = -EINVAL;
|
|
|
|
u16 i_freqk_hz;
|
|
s32 offsetk_hz = offset_freq / 1000;
|
|
|
|
dprintk(1, "\n");
|
|
if (state->m_drxk_state != DRXK_STOPPED &&
|
|
state->m_drxk_state != DRXK_DTV_STARTED)
|
|
goto error;
|
|
|
|
state->m_b_mirror_freq_spect = (state->props.inversion == INVERSION_ON);
|
|
|
|
if (intermediate_frequency < 0) {
|
|
state->m_b_mirror_freq_spect = !state->m_b_mirror_freq_spect;
|
|
intermediate_frequency = -intermediate_frequency;
|
|
}
|
|
|
|
switch (state->m_operation_mode) {
|
|
case OM_QAM_ITU_A:
|
|
case OM_QAM_ITU_C:
|
|
i_freqk_hz = (intermediate_frequency / 1000);
|
|
status = set_qam(state, i_freqk_hz, offsetk_hz);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_drxk_state = DRXK_DTV_STARTED;
|
|
break;
|
|
case OM_DVBT:
|
|
i_freqk_hz = (intermediate_frequency / 1000);
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_dvbt(state, i_freqk_hz, offsetk_hz);
|
|
if (status < 0)
|
|
goto error;
|
|
status = dvbt_start(state);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_drxk_state = DRXK_DTV_STARTED;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int shut_down(struct drxk_state *state)
|
|
{
|
|
dprintk(1, "\n");
|
|
|
|
mpegts_stop(state);
|
|
return 0;
|
|
}
|
|
|
|
static int get_lock_status(struct drxk_state *state, u32 *p_lock_status)
|
|
{
|
|
int status = -EINVAL;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (p_lock_status == NULL)
|
|
goto error;
|
|
|
|
*p_lock_status = NOT_LOCKED;
|
|
|
|
/* define the SCU command code */
|
|
switch (state->m_operation_mode) {
|
|
case OM_QAM_ITU_A:
|
|
case OM_QAM_ITU_B:
|
|
case OM_QAM_ITU_C:
|
|
status = get_qam_lock_status(state, p_lock_status);
|
|
break;
|
|
case OM_DVBT:
|
|
status = get_dvbt_lock_status(state, p_lock_status);
|
|
break;
|
|
default:
|
|
pr_debug("Unsupported operation mode %d in %s\n",
|
|
state->m_operation_mode, __func__);
|
|
return 0;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_start(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
|
|
u16 fec_oc_snc_mode = 0;
|
|
|
|
/* Allow OC to sync again */
|
|
status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
fec_oc_snc_mode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M;
|
|
status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_SNC_UNLOCK__A, 1);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_dto_init(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Rate integration settings */
|
|
status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Additional configuration */
|
|
status = write16(state, FEC_OC_OCR_INVERT__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_SNC_LWM__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_SNC_HWM__A, 12);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_dto_setup(struct drxk_state *state,
|
|
enum operation_mode o_mode)
|
|
{
|
|
int status;
|
|
|
|
u16 fec_oc_reg_mode = 0; /* FEC_OC_MODE register value */
|
|
u16 fec_oc_reg_ipr_mode = 0; /* FEC_OC_IPR_MODE register value */
|
|
u16 fec_oc_dto_mode = 0; /* FEC_OC_IPR_INVERT register value */
|
|
u16 fec_oc_fct_mode = 0; /* FEC_OC_IPR_INVERT register value */
|
|
u16 fec_oc_dto_period = 2; /* FEC_OC_IPR_INVERT register value */
|
|
u16 fec_oc_dto_burst_len = 188; /* FEC_OC_IPR_INVERT register value */
|
|
u32 fec_oc_rcn_ctl_rate = 0; /* FEC_OC_IPR_INVERT register value */
|
|
u16 fec_oc_tmd_mode = 0;
|
|
u16 fec_oc_tmd_int_upd_rate = 0;
|
|
u32 max_bit_rate = 0;
|
|
bool static_clk = false;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Check insertion of the Reed-Solomon parity bytes */
|
|
status = read16(state, FEC_OC_MODE__A, &fec_oc_reg_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M);
|
|
fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
|
|
if (state->m_insert_rs_byte) {
|
|
/* enable parity symbol forward */
|
|
fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M;
|
|
/* MVAL disable during parity bytes */
|
|
fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
|
|
/* TS burst length to 204 */
|
|
fec_oc_dto_burst_len = 204;
|
|
}
|
|
|
|
/* Check serial or parallel output */
|
|
fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
|
|
if (!state->m_enable_parallel) {
|
|
/* MPEG data output is serial -> set ipr_mode[0] */
|
|
fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M;
|
|
}
|
|
|
|
switch (o_mode) {
|
|
case OM_DVBT:
|
|
max_bit_rate = state->m_dvbt_bitrate;
|
|
fec_oc_tmd_mode = 3;
|
|
fec_oc_rcn_ctl_rate = 0xC00000;
|
|
static_clk = state->m_dvbt_static_clk;
|
|
break;
|
|
case OM_QAM_ITU_A: /* fallthrough */
|
|
case OM_QAM_ITU_C:
|
|
fec_oc_tmd_mode = 0x0004;
|
|
fec_oc_rcn_ctl_rate = 0xD2B4EE; /* good for >63 Mb/s */
|
|
max_bit_rate = state->m_dvbc_bitrate;
|
|
static_clk = state->m_dvbc_static_clk;
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
} /* switch (standard) */
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Configure DTO's */
|
|
if (static_clk) {
|
|
u32 bit_rate = 0;
|
|
|
|
/* Rational DTO for MCLK source (static MCLK rate),
|
|
Dynamic DTO for optimal grouping
|
|
(avoid intra-packet gaps),
|
|
DTO offset enable to sync TS burst with MSTRT */
|
|
fec_oc_dto_mode = (FEC_OC_DTO_MODE_DYNAMIC__M |
|
|
FEC_OC_DTO_MODE_OFFSET_ENABLE__M);
|
|
fec_oc_fct_mode = (FEC_OC_FCT_MODE_RAT_ENA__M |
|
|
FEC_OC_FCT_MODE_VIRT_ENA__M);
|
|
|
|
/* Check user defined bitrate */
|
|
bit_rate = max_bit_rate;
|
|
if (bit_rate > 75900000UL) { /* max is 75.9 Mb/s */
|
|
bit_rate = 75900000UL;
|
|
}
|
|
/* Rational DTO period:
|
|
dto_period = (Fsys / bitrate) - 2
|
|
|
|
result should be floored,
|
|
to make sure >= requested bitrate
|
|
*/
|
|
fec_oc_dto_period = (u16) (((state->m_sys_clock_freq)
|
|
* 1000) / bit_rate);
|
|
if (fec_oc_dto_period <= 2)
|
|
fec_oc_dto_period = 0;
|
|
else
|
|
fec_oc_dto_period -= 2;
|
|
fec_oc_tmd_int_upd_rate = 8;
|
|
} else {
|
|
/* (commonAttr->static_clk == false) => dynamic mode */
|
|
fec_oc_dto_mode = FEC_OC_DTO_MODE_DYNAMIC__M;
|
|
fec_oc_fct_mode = FEC_OC_FCT_MODE__PRE;
|
|
fec_oc_tmd_int_upd_rate = 5;
|
|
}
|
|
|
|
/* Write appropriate registers with requested configuration */
|
|
status = write16(state, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_DTO_MODE__A, fec_oc_dto_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_FCT_MODE__A, fec_oc_fct_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_MODE__A, fec_oc_reg_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Rate integration settings */
|
|
status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fec_oc_rcn_ctl_rate);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A,
|
|
fec_oc_tmd_int_upd_rate);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_TMD_MODE__A, fec_oc_tmd_mode);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int mpegts_configure_polarity(struct drxk_state *state)
|
|
{
|
|
u16 fec_oc_reg_ipr_invert = 0;
|
|
|
|
/* Data mask for the output data byte */
|
|
u16 invert_data_mask =
|
|
FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
|
|
FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
|
|
FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
|
|
FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Control selective inversion of output bits */
|
|
fec_oc_reg_ipr_invert &= (~(invert_data_mask));
|
|
if (state->m_invert_data)
|
|
fec_oc_reg_ipr_invert |= invert_data_mask;
|
|
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M));
|
|
if (state->m_invert_err)
|
|
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M;
|
|
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
|
|
if (state->m_invert_str)
|
|
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M;
|
|
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
|
|
if (state->m_invert_val)
|
|
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M;
|
|
fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
|
|
if (state->m_invert_clk)
|
|
fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M;
|
|
|
|
return write16(state, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert);
|
|
}
|
|
|
|
#define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000
|
|
|
|
static int set_agc_rf(struct drxk_state *state,
|
|
struct s_cfg_agc *p_agc_cfg, bool is_dtv)
|
|
{
|
|
int status = -EINVAL;
|
|
u16 data = 0;
|
|
struct s_cfg_agc *p_if_agc_settings;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (p_agc_cfg == NULL)
|
|
goto error;
|
|
|
|
switch (p_agc_cfg->ctrl_mode) {
|
|
case DRXK_AGC_CTRL_AUTO:
|
|
/* Enable RF AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Enable SCU RF AGC loop */
|
|
data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
|
|
|
|
/* Polarity */
|
|
if (state->m_rf_agc_pol)
|
|
data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
|
|
else
|
|
data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Set speed (using complementary reduction value) */
|
|
status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M;
|
|
data |= (~(p_agc_cfg->speed <<
|
|
SCU_RAM_AGC_KI_RED_RAGC_RED__B)
|
|
& SCU_RAM_AGC_KI_RED_RAGC_RED__M);
|
|
|
|
status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (is_dvbt(state))
|
|
p_if_agc_settings = &state->m_dvbt_if_agc_cfg;
|
|
else if (is_qam(state))
|
|
p_if_agc_settings = &state->m_qam_if_agc_cfg;
|
|
else
|
|
p_if_agc_settings = &state->m_atv_if_agc_cfg;
|
|
if (p_if_agc_settings == NULL) {
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* Set TOP, only if IF-AGC is in AUTO mode */
|
|
if (p_if_agc_settings->ctrl_mode == DRXK_AGC_CTRL_AUTO) {
|
|
status = write16(state,
|
|
SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
|
|
p_agc_cfg->top);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* Cut-Off current */
|
|
status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A,
|
|
p_agc_cfg->cut_off_current);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Max. output level */
|
|
status = write16(state, SCU_RAM_AGC_RF_MAX__A,
|
|
p_agc_cfg->max_output_level);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
break;
|
|
|
|
case DRXK_AGC_CTRL_USER:
|
|
/* Enable RF AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Disable SCU RF AGC loop */
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
|
|
if (state->m_rf_agc_pol)
|
|
data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
|
|
else
|
|
data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* SCU c.o.c. to 0, enabling full control range */
|
|
status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Write value to output pin */
|
|
status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A,
|
|
p_agc_cfg->output_level);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
|
|
case DRXK_AGC_CTRL_OFF:
|
|
/* Disable RF AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Disable SCU RF AGC loop */
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
|
|
default:
|
|
status = -EINVAL;
|
|
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000
|
|
|
|
static int set_agc_if(struct drxk_state *state,
|
|
struct s_cfg_agc *p_agc_cfg, bool is_dtv)
|
|
{
|
|
u16 data = 0;
|
|
int status = 0;
|
|
struct s_cfg_agc *p_rf_agc_settings;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
switch (p_agc_cfg->ctrl_mode) {
|
|
case DRXK_AGC_CTRL_AUTO:
|
|
|
|
/* Enable IF AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Enable SCU IF AGC loop */
|
|
data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
|
|
|
|
/* Polarity */
|
|
if (state->m_if_agc_pol)
|
|
data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
|
|
else
|
|
data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Set speed (using complementary reduction value) */
|
|
status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M;
|
|
data |= (~(p_agc_cfg->speed <<
|
|
SCU_RAM_AGC_KI_RED_IAGC_RED__B)
|
|
& SCU_RAM_AGC_KI_RED_IAGC_RED__M);
|
|
|
|
status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (is_qam(state))
|
|
p_rf_agc_settings = &state->m_qam_rf_agc_cfg;
|
|
else
|
|
p_rf_agc_settings = &state->m_atv_rf_agc_cfg;
|
|
if (p_rf_agc_settings == NULL)
|
|
return -1;
|
|
/* Restore TOP */
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
|
|
p_rf_agc_settings->top);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
|
|
case DRXK_AGC_CTRL_USER:
|
|
|
|
/* Enable IF AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Disable SCU IF AGC loop */
|
|
data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
|
|
|
|
/* Polarity */
|
|
if (state->m_if_agc_pol)
|
|
data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
|
|
else
|
|
data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Write value to output pin */
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
|
|
p_agc_cfg->output_level);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
|
|
case DRXK_AGC_CTRL_OFF:
|
|
|
|
/* Disable If AGC DAC */
|
|
status = read16(state, IQM_AF_STDBY__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
|
|
status = write16(state, IQM_AF_STDBY__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Disable SCU IF AGC loop */
|
|
status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
|
|
status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
} /* switch (agcSettingsIf->ctrl_mode) */
|
|
|
|
/* always set the top to support
|
|
configurations without if-loop */
|
|
status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_cfg->top);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int get_qam_signal_to_noise(struct drxk_state *state,
|
|
s32 *p_signal_to_noise)
|
|
{
|
|
int status = 0;
|
|
u16 qam_sl_err_power = 0; /* accum. error between
|
|
raw and sliced symbols */
|
|
u32 qam_sl_sig_power = 0; /* used for MER, depends of
|
|
QAM modulation */
|
|
u32 qam_sl_mer = 0; /* QAM MER */
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* MER calculation */
|
|
|
|
/* get the register value needed for MER */
|
|
status = read16(state, QAM_SL_ERR_POWER__A, &qam_sl_err_power);
|
|
if (status < 0) {
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (state->props.modulation) {
|
|
case QAM_16:
|
|
qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM16 << 2;
|
|
break;
|
|
case QAM_32:
|
|
qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM32 << 2;
|
|
break;
|
|
case QAM_64:
|
|
qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM64 << 2;
|
|
break;
|
|
case QAM_128:
|
|
qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM128 << 2;
|
|
break;
|
|
default:
|
|
case QAM_256:
|
|
qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM256 << 2;
|
|
break;
|
|
}
|
|
|
|
if (qam_sl_err_power > 0) {
|
|
qam_sl_mer = log10times100(qam_sl_sig_power) -
|
|
log10times100((u32) qam_sl_err_power);
|
|
}
|
|
*p_signal_to_noise = qam_sl_mer;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int get_dvbt_signal_to_noise(struct drxk_state *state,
|
|
s32 *p_signal_to_noise)
|
|
{
|
|
int status;
|
|
u16 reg_data = 0;
|
|
u32 eq_reg_td_sqr_err_i = 0;
|
|
u32 eq_reg_td_sqr_err_q = 0;
|
|
u16 eq_reg_td_sqr_err_exp = 0;
|
|
u16 eq_reg_td_tps_pwr_ofs = 0;
|
|
u16 eq_reg_td_req_smb_cnt = 0;
|
|
u32 tps_cnt = 0;
|
|
u32 sqr_err_iq = 0;
|
|
u32 a = 0;
|
|
u32 b = 0;
|
|
u32 c = 0;
|
|
u32 i_mer = 0;
|
|
u16 transmission_params = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A,
|
|
&eq_reg_td_tps_pwr_ofs);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A,
|
|
&eq_reg_td_req_smb_cnt);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A,
|
|
&eq_reg_td_sqr_err_exp);
|
|
if (status < 0)
|
|
goto error;
|
|
status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A,
|
|
®_data);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Extend SQR_ERR_I operational range */
|
|
eq_reg_td_sqr_err_i = (u32) reg_data;
|
|
if ((eq_reg_td_sqr_err_exp > 11) &&
|
|
(eq_reg_td_sqr_err_i < 0x00000FFFUL)) {
|
|
eq_reg_td_sqr_err_i += 0x00010000UL;
|
|
}
|
|
status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®_data);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Extend SQR_ERR_Q operational range */
|
|
eq_reg_td_sqr_err_q = (u32) reg_data;
|
|
if ((eq_reg_td_sqr_err_exp > 11) &&
|
|
(eq_reg_td_sqr_err_q < 0x00000FFFUL))
|
|
eq_reg_td_sqr_err_q += 0x00010000UL;
|
|
|
|
status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A,
|
|
&transmission_params);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Check input data for MER */
|
|
|
|
/* MER calculation (in 0.1 dB) without math.h */
|
|
if ((eq_reg_td_tps_pwr_ofs == 0) || (eq_reg_td_req_smb_cnt == 0))
|
|
i_mer = 0;
|
|
else if ((eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) == 0) {
|
|
/* No error at all, this must be the HW reset value
|
|
* Apparently no first measurement yet
|
|
* Set MER to 0.0 */
|
|
i_mer = 0;
|
|
} else {
|
|
sqr_err_iq = (eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) <<
|
|
eq_reg_td_sqr_err_exp;
|
|
if ((transmission_params &
|
|
OFDM_SC_RA_RAM_OP_PARAM_MODE__M)
|
|
== OFDM_SC_RA_RAM_OP_PARAM_MODE_2K)
|
|
tps_cnt = 17;
|
|
else
|
|
tps_cnt = 68;
|
|
|
|
/* IMER = 100 * log10 (x)
|
|
where x = (eq_reg_td_tps_pwr_ofs^2 *
|
|
eq_reg_td_req_smb_cnt * tps_cnt)/sqr_err_iq
|
|
|
|
=> IMER = a + b -c
|
|
where a = 100 * log10 (eq_reg_td_tps_pwr_ofs^2)
|
|
b = 100 * log10 (eq_reg_td_req_smb_cnt * tps_cnt)
|
|
c = 100 * log10 (sqr_err_iq)
|
|
*/
|
|
|
|
/* log(x) x = 9bits * 9bits->18 bits */
|
|
a = log10times100(eq_reg_td_tps_pwr_ofs *
|
|
eq_reg_td_tps_pwr_ofs);
|
|
/* log(x) x = 16bits * 7bits->23 bits */
|
|
b = log10times100(eq_reg_td_req_smb_cnt * tps_cnt);
|
|
/* log(x) x = (16bits + 16bits) << 15 ->32 bits */
|
|
c = log10times100(sqr_err_iq);
|
|
|
|
i_mer = a + b - c;
|
|
}
|
|
*p_signal_to_noise = i_mer;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int get_signal_to_noise(struct drxk_state *state, s32 *p_signal_to_noise)
|
|
{
|
|
dprintk(1, "\n");
|
|
|
|
*p_signal_to_noise = 0;
|
|
switch (state->m_operation_mode) {
|
|
case OM_DVBT:
|
|
return get_dvbt_signal_to_noise(state, p_signal_to_noise);
|
|
case OM_QAM_ITU_A:
|
|
case OM_QAM_ITU_C:
|
|
return get_qam_signal_to_noise(state, p_signal_to_noise);
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
static int get_dvbt_quality(struct drxk_state *state, s32 *p_quality)
|
|
{
|
|
/* SNR Values for quasi errorfree reception rom Nordig 2.2 */
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
static s32 QE_SN[] = {
|
|
51, /* QPSK 1/2 */
|
|
69, /* QPSK 2/3 */
|
|
79, /* QPSK 3/4 */
|
|
89, /* QPSK 5/6 */
|
|
97, /* QPSK 7/8 */
|
|
108, /* 16-QAM 1/2 */
|
|
131, /* 16-QAM 2/3 */
|
|
146, /* 16-QAM 3/4 */
|
|
156, /* 16-QAM 5/6 */
|
|
160, /* 16-QAM 7/8 */
|
|
165, /* 64-QAM 1/2 */
|
|
187, /* 64-QAM 2/3 */
|
|
202, /* 64-QAM 3/4 */
|
|
216, /* 64-QAM 5/6 */
|
|
225, /* 64-QAM 7/8 */
|
|
};
|
|
|
|
*p_quality = 0;
|
|
|
|
do {
|
|
s32 signal_to_noise = 0;
|
|
u16 constellation = 0;
|
|
u16 code_rate = 0;
|
|
u32 signal_to_noise_rel;
|
|
u32 ber_quality;
|
|
|
|
status = get_dvbt_signal_to_noise(state, &signal_to_noise);
|
|
if (status < 0)
|
|
break;
|
|
status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A,
|
|
&constellation);
|
|
if (status < 0)
|
|
break;
|
|
constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M;
|
|
|
|
status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A,
|
|
&code_rate);
|
|
if (status < 0)
|
|
break;
|
|
code_rate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M;
|
|
|
|
if (constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM ||
|
|
code_rate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8)
|
|
break;
|
|
signal_to_noise_rel = signal_to_noise -
|
|
QE_SN[constellation * 5 + code_rate];
|
|
ber_quality = 100;
|
|
|
|
if (signal_to_noise_rel < -70)
|
|
*p_quality = 0;
|
|
else if (signal_to_noise_rel < 30)
|
|
*p_quality = ((signal_to_noise_rel + 70) *
|
|
ber_quality) / 100;
|
|
else
|
|
*p_quality = ber_quality;
|
|
} while (0);
|
|
return 0;
|
|
};
|
|
|
|
static int get_dvbc_quality(struct drxk_state *state, s32 *p_quality)
|
|
{
|
|
int status = 0;
|
|
*p_quality = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
do {
|
|
u32 signal_to_noise = 0;
|
|
u32 ber_quality = 100;
|
|
u32 signal_to_noise_rel = 0;
|
|
|
|
status = get_qam_signal_to_noise(state, &signal_to_noise);
|
|
if (status < 0)
|
|
break;
|
|
|
|
switch (state->props.modulation) {
|
|
case QAM_16:
|
|
signal_to_noise_rel = signal_to_noise - 200;
|
|
break;
|
|
case QAM_32:
|
|
signal_to_noise_rel = signal_to_noise - 230;
|
|
break; /* Not in NorDig */
|
|
case QAM_64:
|
|
signal_to_noise_rel = signal_to_noise - 260;
|
|
break;
|
|
case QAM_128:
|
|
signal_to_noise_rel = signal_to_noise - 290;
|
|
break;
|
|
default:
|
|
case QAM_256:
|
|
signal_to_noise_rel = signal_to_noise - 320;
|
|
break;
|
|
}
|
|
|
|
if (signal_to_noise_rel < -70)
|
|
*p_quality = 0;
|
|
else if (signal_to_noise_rel < 30)
|
|
*p_quality = ((signal_to_noise_rel + 70) *
|
|
ber_quality) / 100;
|
|
else
|
|
*p_quality = ber_quality;
|
|
} while (0);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int get_quality(struct drxk_state *state, s32 *p_quality)
|
|
{
|
|
dprintk(1, "\n");
|
|
|
|
switch (state->m_operation_mode) {
|
|
case OM_DVBT:
|
|
return get_dvbt_quality(state, p_quality);
|
|
case OM_QAM_ITU_A:
|
|
return get_dvbc_quality(state, p_quality);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* Free data ram in SIO HI */
|
|
#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
|
|
#define SIO_HI_RA_RAM_USR_END__A 0x420060
|
|
|
|
#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
|
|
#define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
|
|
#define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
|
|
#define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
|
|
|
|
#define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F)
|
|
#define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F)
|
|
#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF)
|
|
|
|
static int ConfigureI2CBridge(struct drxk_state *state, bool b_enable_bridge)
|
|
{
|
|
int status = -EINVAL;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return 0;
|
|
if (state->m_drxk_state == DRXK_POWERED_DOWN)
|
|
goto error;
|
|
|
|
if (state->no_i2c_bridge)
|
|
return 0;
|
|
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_1__A,
|
|
SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
if (b_enable_bridge) {
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
|
|
SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED);
|
|
if (status < 0)
|
|
goto error;
|
|
} else {
|
|
status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
|
|
SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
status = hi_command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, NULL);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int set_pre_saw(struct drxk_state *state,
|
|
struct s_cfg_pre_saw *p_pre_saw_cfg)
|
|
{
|
|
int status = -EINVAL;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if ((p_pre_saw_cfg == NULL)
|
|
|| (p_pre_saw_cfg->reference > IQM_AF_PDREF__M))
|
|
goto error;
|
|
|
|
status = write16(state, IQM_AF_PDREF__A, p_pre_saw_cfg->reference);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int bl_direct_cmd(struct drxk_state *state, u32 target_addr,
|
|
u16 rom_offset, u16 nr_of_elements, u32 time_out)
|
|
{
|
|
u16 bl_status = 0;
|
|
u16 offset = (u16) ((target_addr >> 0) & 0x00FFFF);
|
|
u16 blockbank = (u16) ((target_addr >> 16) & 0x000FFF);
|
|
int status;
|
|
unsigned long end;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
mutex_lock(&state->mutex);
|
|
status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_TGT_HDR__A, blockbank);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_TGT_ADDR__A, offset);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_SRC_ADDR__A, rom_offset);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_SRC_LEN__A, nr_of_elements);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
end = jiffies + msecs_to_jiffies(time_out);
|
|
do {
|
|
status = read16(state, SIO_BL_STATUS__A, &bl_status);
|
|
if (status < 0)
|
|
goto error;
|
|
} while ((bl_status == 0x1) && time_is_after_jiffies(end));
|
|
if (bl_status == 0x1) {
|
|
pr_err("SIO not ready\n");
|
|
status = -EINVAL;
|
|
goto error2;
|
|
}
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
error2:
|
|
mutex_unlock(&state->mutex);
|
|
return status;
|
|
|
|
}
|
|
|
|
static int adc_sync_measurement(struct drxk_state *state, u16 *count)
|
|
{
|
|
u16 data = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* start measurement */
|
|
status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_START_LOCK__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
*count = 0;
|
|
status = read16(state, IQM_AF_PHASE0__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
if (data == 127)
|
|
*count = *count + 1;
|
|
status = read16(state, IQM_AF_PHASE1__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
if (data == 127)
|
|
*count = *count + 1;
|
|
status = read16(state, IQM_AF_PHASE2__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
if (data == 127)
|
|
*count = *count + 1;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int adc_synchronization(struct drxk_state *state)
|
|
{
|
|
u16 count = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
status = adc_sync_measurement(state, &count);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (count == 1) {
|
|
/* Try sampling on a different edge */
|
|
u16 clk_neg = 0;
|
|
|
|
status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
|
|
if (status < 0)
|
|
goto error;
|
|
if ((clk_neg & IQM_AF_CLKNEG_CLKNEGDATA__M) ==
|
|
IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) {
|
|
clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
|
|
clk_neg |=
|
|
IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG;
|
|
} else {
|
|
clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
|
|
clk_neg |=
|
|
IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS;
|
|
}
|
|
status = write16(state, IQM_AF_CLKNEG__A, clk_neg);
|
|
if (status < 0)
|
|
goto error;
|
|
status = adc_sync_measurement(state, &count);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
if (count < 2)
|
|
status = -EINVAL;
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int set_frequency_shifter(struct drxk_state *state,
|
|
u16 intermediate_freqk_hz,
|
|
s32 tuner_freq_offset, bool is_dtv)
|
|
{
|
|
bool select_pos_image = false;
|
|
u32 rf_freq_residual = tuner_freq_offset;
|
|
u32 fm_frequency_shift = 0;
|
|
bool tuner_mirror = !state->m_b_mirror_freq_spect;
|
|
u32 adc_freq;
|
|
bool adc_flip;
|
|
int status;
|
|
u32 if_freq_actual;
|
|
u32 sampling_frequency = (u32) (state->m_sys_clock_freq / 3);
|
|
u32 frequency_shift;
|
|
bool image_to_select;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/*
|
|
Program frequency shifter
|
|
No need to account for mirroring on RF
|
|
*/
|
|
if (is_dtv) {
|
|
if ((state->m_operation_mode == OM_QAM_ITU_A) ||
|
|
(state->m_operation_mode == OM_QAM_ITU_C) ||
|
|
(state->m_operation_mode == OM_DVBT))
|
|
select_pos_image = true;
|
|
else
|
|
select_pos_image = false;
|
|
}
|
|
if (tuner_mirror)
|
|
/* tuner doesn't mirror */
|
|
if_freq_actual = intermediate_freqk_hz +
|
|
rf_freq_residual + fm_frequency_shift;
|
|
else
|
|
/* tuner mirrors */
|
|
if_freq_actual = intermediate_freqk_hz -
|
|
rf_freq_residual - fm_frequency_shift;
|
|
if (if_freq_actual > sampling_frequency / 2) {
|
|
/* adc mirrors */
|
|
adc_freq = sampling_frequency - if_freq_actual;
|
|
adc_flip = true;
|
|
} else {
|
|
/* adc doesn't mirror */
|
|
adc_freq = if_freq_actual;
|
|
adc_flip = false;
|
|
}
|
|
|
|
frequency_shift = adc_freq;
|
|
image_to_select = state->m_rfmirror ^ tuner_mirror ^
|
|
adc_flip ^ select_pos_image;
|
|
state->m_iqm_fs_rate_ofs =
|
|
Frac28a((frequency_shift), sampling_frequency);
|
|
|
|
if (image_to_select)
|
|
state->m_iqm_fs_rate_ofs = ~state->m_iqm_fs_rate_ofs + 1;
|
|
|
|
/* Program frequency shifter with tuner offset compensation */
|
|
/* frequency_shift += tuner_freq_offset; TODO */
|
|
status = write32(state, IQM_FS_RATE_OFS_LO__A,
|
|
state->m_iqm_fs_rate_ofs);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int init_agc(struct drxk_state *state, bool is_dtv)
|
|
{
|
|
u16 ingain_tgt = 0;
|
|
u16 ingain_tgt_min = 0;
|
|
u16 ingain_tgt_max = 0;
|
|
u16 clp_cyclen = 0;
|
|
u16 clp_sum_min = 0;
|
|
u16 clp_dir_to = 0;
|
|
u16 sns_sum_min = 0;
|
|
u16 sns_sum_max = 0;
|
|
u16 clp_sum_max = 0;
|
|
u16 sns_dir_to = 0;
|
|
u16 ki_innergain_min = 0;
|
|
u16 if_iaccu_hi_tgt = 0;
|
|
u16 if_iaccu_hi_tgt_min = 0;
|
|
u16 if_iaccu_hi_tgt_max = 0;
|
|
u16 data = 0;
|
|
u16 fast_clp_ctrl_delay = 0;
|
|
u16 clp_ctrl_mode = 0;
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* Common settings */
|
|
sns_sum_max = 1023;
|
|
if_iaccu_hi_tgt_min = 2047;
|
|
clp_cyclen = 500;
|
|
clp_sum_max = 1023;
|
|
|
|
/* AGCInit() not available for DVBT; init done in microcode */
|
|
if (!is_qam(state)) {
|
|
pr_err("%s: mode %d is not DVB-C\n",
|
|
__func__, state->m_operation_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* FIXME: Analog TV AGC require different settings */
|
|
|
|
/* Standard specific settings */
|
|
clp_sum_min = 8;
|
|
clp_dir_to = (u16) -9;
|
|
clp_ctrl_mode = 0;
|
|
sns_sum_min = 8;
|
|
sns_dir_to = (u16) -9;
|
|
ki_innergain_min = (u16) -1030;
|
|
if_iaccu_hi_tgt_max = 0x2380;
|
|
if_iaccu_hi_tgt = 0x2380;
|
|
ingain_tgt_min = 0x0511;
|
|
ingain_tgt = 0x0511;
|
|
ingain_tgt_max = 5119;
|
|
fast_clp_ctrl_delay = state->m_qam_if_agc_cfg.fast_clip_ctrl_delay;
|
|
|
|
status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A,
|
|
fast_clp_ctrl_delay);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clp_ctrl_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingain_tgt);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingain_tgt_min);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingain_tgt_max);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A,
|
|
if_iaccu_hi_tgt_min);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
|
|
if_iaccu_hi_tgt_max);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clp_sum_max);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, sns_sum_max);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A,
|
|
ki_innergain_min);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A,
|
|
if_iaccu_hi_tgt);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clp_cyclen);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clp_sum_min);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, sns_sum_min);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clp_dir_to);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, sns_dir_to);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Initialize inner-loop KI gain factors */
|
|
status = read16(state, SCU_RAM_AGC_KI__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
data = 0x0657;
|
|
data &= ~SCU_RAM_AGC_KI_RF__M;
|
|
data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
|
|
data &= ~SCU_RAM_AGC_KI_IF__M;
|
|
data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
|
|
|
|
status = write16(state, SCU_RAM_AGC_KI__A, data);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int dvbtqam_get_acc_pkt_err(struct drxk_state *state, u16 *packet_err)
|
|
{
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
if (packet_err == NULL)
|
|
status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
|
|
else
|
|
status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A,
|
|
packet_err);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int dvbt_sc_command(struct drxk_state *state,
|
|
u16 cmd, u16 subcmd,
|
|
u16 param0, u16 param1, u16 param2,
|
|
u16 param3, u16 param4)
|
|
{
|
|
u16 cur_cmd = 0;
|
|
u16 err_code = 0;
|
|
u16 retry_cnt = 0;
|
|
u16 sc_exec = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_exec);
|
|
if (sc_exec != 1) {
|
|
/* SC is not running */
|
|
status = -EINVAL;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Wait until sc is ready to receive command */
|
|
retry_cnt = 0;
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd);
|
|
retry_cnt++;
|
|
} while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES));
|
|
if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0))
|
|
goto error;
|
|
|
|
/* Write sub-command */
|
|
switch (cmd) {
|
|
/* All commands using sub-cmd */
|
|
case OFDM_SC_RA_RAM_CMD_PROC_START:
|
|
case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
|
|
case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
|
|
status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
default:
|
|
/* Do nothing */
|
|
break;
|
|
}
|
|
|
|
/* Write needed parameters and the command */
|
|
status = 0;
|
|
switch (cmd) {
|
|
/* All commands using 5 parameters */
|
|
/* All commands using 4 parameters */
|
|
/* All commands using 3 parameters */
|
|
/* All commands using 2 parameters */
|
|
case OFDM_SC_RA_RAM_CMD_PROC_START:
|
|
case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
|
|
case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
|
|
status |= write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
|
|
/* fall through - All commands using 1 parameters */
|
|
case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
|
|
case OFDM_SC_RA_RAM_CMD_USER_IO:
|
|
status |= write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
|
|
/* fall through - All commands using 0 parameters */
|
|
case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
|
|
case OFDM_SC_RA_RAM_CMD_NULL:
|
|
/* Write command */
|
|
status |= write16(state, OFDM_SC_RA_RAM_CMD__A, cmd);
|
|
break;
|
|
default:
|
|
/* Unknown command */
|
|
status = -EINVAL;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Wait until sc is ready processing command */
|
|
retry_cnt = 0;
|
|
do {
|
|
usleep_range(1000, 2000);
|
|
status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd);
|
|
retry_cnt++;
|
|
} while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES));
|
|
if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0))
|
|
goto error;
|
|
|
|
/* Check for illegal cmd */
|
|
status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &err_code);
|
|
if (err_code == 0xFFFF) {
|
|
/* illegal command */
|
|
status = -EINVAL;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Retrieve results parameters from SC */
|
|
switch (cmd) {
|
|
/* All commands yielding 5 results */
|
|
/* All commands yielding 4 results */
|
|
/* All commands yielding 3 results */
|
|
/* All commands yielding 2 results */
|
|
/* All commands yielding 1 result */
|
|
case OFDM_SC_RA_RAM_CMD_USER_IO:
|
|
case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
|
|
status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0));
|
|
/* All commands yielding 0 results */
|
|
case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
|
|
case OFDM_SC_RA_RAM_CMD_SET_TIMER:
|
|
case OFDM_SC_RA_RAM_CMD_PROC_START:
|
|
case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
|
|
case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
|
|
case OFDM_SC_RA_RAM_CMD_NULL:
|
|
break;
|
|
default:
|
|
/* Unknown command */
|
|
status = -EINVAL;
|
|
break;
|
|
} /* switch (cmd->cmd) */
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int power_up_dvbt(struct drxk_state *state)
|
|
{
|
|
enum drx_power_mode power_mode = DRX_POWER_UP;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
status = ctrl_power_mode(state, &power_mode);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int dvbt_ctrl_set_inc_enable(struct drxk_state *state, bool *enabled)
|
|
{
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
if (*enabled)
|
|
status = write16(state, IQM_CF_BYPASSDET__A, 0);
|
|
else
|
|
status = write16(state, IQM_CF_BYPASSDET__A, 1);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
#define DEFAULT_FR_THRES_8K 4000
|
|
static int dvbt_ctrl_set_fr_enable(struct drxk_state *state, bool *enabled)
|
|
{
|
|
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
if (*enabled) {
|
|
/* write mask to 1 */
|
|
status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A,
|
|
DEFAULT_FR_THRES_8K);
|
|
} else {
|
|
/* write mask to 0 */
|
|
status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0);
|
|
}
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int dvbt_ctrl_set_echo_threshold(struct drxk_state *state,
|
|
struct drxk_cfg_dvbt_echo_thres_t *echo_thres)
|
|
{
|
|
u16 data = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
switch (echo_thres->fft_mode) {
|
|
case DRX_FFTMODE_2K:
|
|
data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M;
|
|
data |= ((echo_thres->threshold <<
|
|
OFDM_SC_RA_RAM_ECHO_THRES_2K__B)
|
|
& (OFDM_SC_RA_RAM_ECHO_THRES_2K__M));
|
|
break;
|
|
case DRX_FFTMODE_8K:
|
|
data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M;
|
|
data |= ((echo_thres->threshold <<
|
|
OFDM_SC_RA_RAM_ECHO_THRES_8K__B)
|
|
& (OFDM_SC_RA_RAM_ECHO_THRES_8K__M));
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int dvbt_ctrl_set_sqi_speed(struct drxk_state *state,
|
|
enum drxk_cfg_dvbt_sqi_speed *speed)
|
|
{
|
|
int status = -EINVAL;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
switch (*speed) {
|
|
case DRXK_DVBT_SQI_SPEED_FAST:
|
|
case DRXK_DVBT_SQI_SPEED_MEDIUM:
|
|
case DRXK_DVBT_SQI_SPEED_SLOW:
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A,
|
|
(u16) *speed);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Activate DVBT specific presets
|
|
* \param demod instance of demodulator.
|
|
* \return DRXStatus_t.
|
|
*
|
|
* Called in DVBTSetStandard
|
|
*
|
|
*/
|
|
static int dvbt_activate_presets(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
bool setincenable = false;
|
|
bool setfrenable = true;
|
|
|
|
struct drxk_cfg_dvbt_echo_thres_t echo_thres2k = { 0, DRX_FFTMODE_2K };
|
|
struct drxk_cfg_dvbt_echo_thres_t echo_thres8k = { 0, DRX_FFTMODE_8K };
|
|
|
|
dprintk(1, "\n");
|
|
status = dvbt_ctrl_set_inc_enable(state, &setincenable);
|
|
if (status < 0)
|
|
goto error;
|
|
status = dvbt_ctrl_set_fr_enable(state, &setfrenable);
|
|
if (status < 0)
|
|
goto error;
|
|
status = dvbt_ctrl_set_echo_threshold(state, &echo_thres2k);
|
|
if (status < 0)
|
|
goto error;
|
|
status = dvbt_ctrl_set_echo_threshold(state, &echo_thres8k);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A,
|
|
state->m_dvbt_if_agc_cfg.ingain_tgt_max);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Initialize channelswitch-independent settings for DVBT.
|
|
* \param demod instance of demodulator.
|
|
* \return DRXStatus_t.
|
|
*
|
|
* For ROM code channel filter taps are loaded from the bootloader. For microcode
|
|
* the DVB-T taps from the drxk_filters.h are used.
|
|
*/
|
|
static int set_dvbt_standard(struct drxk_state *state,
|
|
enum operation_mode o_mode)
|
|
{
|
|
u16 cmd_result = 0;
|
|
u16 data = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
power_up_dvbt(state);
|
|
/* added antenna switch */
|
|
switch_antenna_to_dvbt(state);
|
|
/* send OFDM reset command */
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_RESET,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* send OFDM setenv command */
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* reset datapath for OFDM, processors first */
|
|
status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* IQM setup */
|
|
/* synchronize on ofdstate->m_festart */
|
|
status = write16(state, IQM_AF_UPD_SEL__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
/* window size for clipping ADC detection */
|
|
status = write16(state, IQM_AF_CLP_LEN__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
/* window size for for sense pre-SAW detection */
|
|
status = write16(state, IQM_AF_SNS_LEN__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
/* sense threshold for sense pre-SAW detection */
|
|
status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_iqm_af(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_AF_AGC_RF__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Impulse noise cruncher setup */
|
|
status = write16(state, IQM_AF_INC_LCT__A, 0); /* crunch in IQM_CF */
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_DET_LCT__A, 0); /* detect in IQM_CF */
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_WND_LEN__A, 3); /* peak detector window length */
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_RC_STRETCH__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_DS_ENA__A, 0x4); /* decimate output 2 */
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_SCALE__A, 1600);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_SCALE_SH__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* virtual clipping threshold for clipping ADC detection */
|
|
status = write16(state, IQM_AF_CLP_TH__A, 448);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_DATATH__A, 495); /* crunching threshold */
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT,
|
|
DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_CF_PKDTH__A, 2); /* peak detector threshold */
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
/* enable power measurement interrupt */
|
|
status = write16(state, IQM_CF_COMM_INT_MSK__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* IQM will not be reset from here, sync ADC and update/init AGC */
|
|
status = adc_synchronization(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_pre_saw(state, &state->m_dvbt_pre_saw_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Halt SCU to enable safe non-atomic accesses */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = set_agc_rf(state, &state->m_dvbt_rf_agc_cfg, true);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_agc_if(state, &state->m_dvbt_if_agc_cfg, true);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Set Noise Estimation notch width and enable DC fix */
|
|
status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M;
|
|
status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Activate SCU to enable SCU commands */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (!state->m_drxk_a3_rom_code) {
|
|
/* AGCInit() is not done for DVBT, so set agcfast_clip_ctrl_delay */
|
|
status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A,
|
|
state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* OFDM_SC setup */
|
|
#ifdef COMPILE_FOR_NONRT
|
|
status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
#endif
|
|
|
|
/* FEC setup */
|
|
status = write16(state, FEC_DI_INPUT_CTL__A, 1); /* OFDM input */
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
#ifdef COMPILE_FOR_NONRT
|
|
status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400);
|
|
if (status < 0)
|
|
goto error;
|
|
#else
|
|
status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000);
|
|
if (status < 0)
|
|
goto error;
|
|
#endif
|
|
status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Setup MPEG bus */
|
|
status = mpegts_dto_setup(state, OM_DVBT);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Set DVBT Presets */
|
|
status = dvbt_activate_presets(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
/*
|
|
* \brief start dvbt demodulating for channel.
|
|
* \param demod instance of demodulator.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int dvbt_start(struct drxk_state *state)
|
|
{
|
|
u16 param1;
|
|
int status;
|
|
/* drxk_ofdm_sc_cmd_t scCmd; */
|
|
|
|
dprintk(1, "\n");
|
|
/* start correct processes to get in lock */
|
|
/* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */
|
|
param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN;
|
|
status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0,
|
|
OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1,
|
|
0, 0, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
/* start FEC OC */
|
|
status = mpegts_start(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Set up dvbt demodulator for channel.
|
|
* \param demod instance of demodulator.
|
|
* \return DRXStatus_t.
|
|
* // original DVBTSetChannel()
|
|
*/
|
|
static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
|
|
s32 tuner_freq_offset)
|
|
{
|
|
u16 cmd_result = 0;
|
|
u16 transmission_params = 0;
|
|
u16 operation_mode = 0;
|
|
u32 iqm_rc_rate_ofs = 0;
|
|
u32 bandwidth = 0;
|
|
u16 param1;
|
|
int status;
|
|
|
|
dprintk(1, "IF =%d, TFO = %d\n",
|
|
intermediate_freqk_hz, tuner_freq_offset);
|
|
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_STOP,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Halt SCU to enable safe non-atomic accesses */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Stop processors */
|
|
status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Mandatory fix, always stop CP, required to set spl offset back to
|
|
hardware default (is set to 0 by ucode during pilot detection */
|
|
status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/*== Write channel settings to device ================================*/
|
|
|
|
/* mode */
|
|
switch (state->props.transmission_mode) {
|
|
case TRANSMISSION_MODE_AUTO:
|
|
default:
|
|
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M;
|
|
/* fall through - try first guess DRX_FFTMODE_8K */
|
|
case TRANSMISSION_MODE_8K:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
|
|
break;
|
|
case TRANSMISSION_MODE_2K:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K;
|
|
break;
|
|
}
|
|
|
|
/* guard */
|
|
switch (state->props.guard_interval) {
|
|
default:
|
|
case GUARD_INTERVAL_AUTO:
|
|
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M;
|
|
/* fall through - try first guess DRX_GUARD_1DIV4 */
|
|
case GUARD_INTERVAL_1_4:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
|
|
break;
|
|
case GUARD_INTERVAL_1_32:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32;
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16;
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8;
|
|
break;
|
|
}
|
|
|
|
/* hierarchy */
|
|
switch (state->props.hierarchy) {
|
|
case HIERARCHY_AUTO:
|
|
case HIERARCHY_NONE:
|
|
default:
|
|
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M;
|
|
/* try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
|
|
/* transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */
|
|
/* fall through */
|
|
case HIERARCHY_1:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
|
|
break;
|
|
case HIERARCHY_2:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2;
|
|
break;
|
|
case HIERARCHY_4:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4;
|
|
break;
|
|
}
|
|
|
|
|
|
/* modulation */
|
|
switch (state->props.modulation) {
|
|
case QAM_AUTO:
|
|
default:
|
|
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M;
|
|
/* fall through - try first guess DRX_CONSTELLATION_QAM64 */
|
|
case QAM_64:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
|
|
break;
|
|
case QPSK:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK;
|
|
break;
|
|
case QAM_16:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16;
|
|
break;
|
|
}
|
|
#if 0
|
|
/* No hierarchical channels support in BDA */
|
|
/* Priority (only for hierarchical channels) */
|
|
switch (channel->priority) {
|
|
case DRX_PRIORITY_LOW:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO;
|
|
WR16(dev_addr, OFDM_EC_SB_PRIOR__A,
|
|
OFDM_EC_SB_PRIOR_LO);
|
|
break;
|
|
case DRX_PRIORITY_HIGH:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
|
|
WR16(dev_addr, OFDM_EC_SB_PRIOR__A,
|
|
OFDM_EC_SB_PRIOR_HI));
|
|
break;
|
|
case DRX_PRIORITY_UNKNOWN: /* fall through */
|
|
default:
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
#else
|
|
/* Set Priority high */
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
|
|
status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI);
|
|
if (status < 0)
|
|
goto error;
|
|
#endif
|
|
|
|
/* coderate */
|
|
switch (state->props.code_rate_HP) {
|
|
case FEC_AUTO:
|
|
default:
|
|
operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M;
|
|
/* fall through - try first guess DRX_CODERATE_2DIV3 */
|
|
case FEC_2_3:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
|
|
break;
|
|
case FEC_1_2:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2;
|
|
break;
|
|
case FEC_3_4:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4;
|
|
break;
|
|
case FEC_5_6:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6;
|
|
break;
|
|
case FEC_7_8:
|
|
transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* SAW filter selection: normally not necessary, but if wanted
|
|
* the application can select a SAW filter via the driver by
|
|
* using UIOs
|
|
*/
|
|
|
|
/* First determine real bandwidth (Hz) */
|
|
/* Also set delay for impulse noise cruncher */
|
|
/*
|
|
* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is
|
|
* changed by SC for fix for some 8K,1/8 guard but is restored by
|
|
* InitEC and ResetEC functions
|
|
*/
|
|
switch (state->props.bandwidth_hz) {
|
|
case 0:
|
|
state->props.bandwidth_hz = 8000000;
|
|
/* fall through */
|
|
case 8000000:
|
|
bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
|
|
status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
|
|
3052);
|
|
if (status < 0)
|
|
goto error;
|
|
/* cochannel protection for PAL 8 MHz */
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
|
|
7);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
|
|
7);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
|
|
7);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
|
|
1);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
case 7000000:
|
|
bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ;
|
|
status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
|
|
3491);
|
|
if (status < 0)
|
|
goto error;
|
|
/* cochannel protection for PAL 7 MHz */
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
|
|
8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
|
|
8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
|
|
4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
|
|
1);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
case 6000000:
|
|
bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ;
|
|
status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
|
|
4073);
|
|
if (status < 0)
|
|
goto error;
|
|
/* cochannel protection for NTSC 6 MHz */
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
|
|
19);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
|
|
19);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
|
|
14);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
|
|
1);
|
|
if (status < 0)
|
|
goto error;
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
if (iqm_rc_rate_ofs == 0) {
|
|
/* Now compute IQM_RC_RATE_OFS
|
|
(((SysFreq/BandWidth)/2)/2) -1) * 2^23)
|
|
=>
|
|
((SysFreq / BandWidth) * (2^21)) - (2^23)
|
|
*/
|
|
/* (SysFreq / BandWidth) * (2^28) */
|
|
/*
|
|
* assert (MAX(sysClk)/MIN(bandwidth) < 16)
|
|
* => assert(MAX(sysClk) < 16*MIN(bandwidth))
|
|
* => assert(109714272 > 48000000) = true
|
|
* so Frac 28 can be used
|
|
*/
|
|
iqm_rc_rate_ofs = Frac28a((u32)
|
|
((state->m_sys_clock_freq *
|
|
1000) / 3), bandwidth);
|
|
/* (SysFreq / BandWidth) * (2^21), rounding before truncating */
|
|
if ((iqm_rc_rate_ofs & 0x7fL) >= 0x40)
|
|
iqm_rc_rate_ofs += 0x80L;
|
|
iqm_rc_rate_ofs = iqm_rc_rate_ofs >> 7;
|
|
/* ((SysFreq / BandWidth) * (2^21)) - (2^23) */
|
|
iqm_rc_rate_ofs = iqm_rc_rate_ofs - (1 << 23);
|
|
}
|
|
|
|
iqm_rc_rate_ofs &=
|
|
((((u32) IQM_RC_RATE_OFS_HI__M) <<
|
|
IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M);
|
|
status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate_ofs);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Bandwidth setting done */
|
|
|
|
#if 0
|
|
status = dvbt_set_frequency_shift(demod, channel, tuner_offset);
|
|
if (status < 0)
|
|
goto error;
|
|
#endif
|
|
status = set_frequency_shifter(state, intermediate_freqk_hz,
|
|
tuner_freq_offset, true);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/*== start SC, write channel settings to SC ==========================*/
|
|
|
|
/* Activate SCU to enable SCU commands */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Enable SC after setting all other parameters */
|
|
status = write16(state, OFDM_SC_COMM_STATE__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, OFDM_SC_COMM_EXEC__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_START,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Write SC parameter registers, set all AUTO flags in operation mode */
|
|
param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M |
|
|
OFDM_SC_RA_RAM_OP_AUTO_GUARD__M |
|
|
OFDM_SC_RA_RAM_OP_AUTO_CONST__M |
|
|
OFDM_SC_RA_RAM_OP_AUTO_HIER__M |
|
|
OFDM_SC_RA_RAM_OP_AUTO_RATE__M);
|
|
status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM,
|
|
0, transmission_params, param1, 0, 0, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (!state->m_drxk_a3_rom_code)
|
|
status = dvbt_ctrl_set_sqi_speed(state, &state->m_sqi_speed);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Retrieve lock status .
|
|
* \param demod Pointer to demodulator instance.
|
|
* \param lockStat Pointer to lock status structure.
|
|
* \return DRXStatus_t.
|
|
*
|
|
*/
|
|
static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status)
|
|
{
|
|
int status;
|
|
const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M |
|
|
OFDM_SC_RA_RAM_LOCK_FEC__M);
|
|
const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M);
|
|
const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M;
|
|
|
|
u16 sc_ra_ram_lock = 0;
|
|
u16 sc_comm_exec = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
*p_lock_status = NOT_LOCKED;
|
|
/* driver 0.9.0 */
|
|
/* Check if SC is running */
|
|
status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_comm_exec);
|
|
if (status < 0)
|
|
goto end;
|
|
if (sc_comm_exec == OFDM_SC_COMM_EXEC_STOP)
|
|
goto end;
|
|
|
|
status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &sc_ra_ram_lock);
|
|
if (status < 0)
|
|
goto end;
|
|
|
|
if ((sc_ra_ram_lock & mpeg_lock_mask) == mpeg_lock_mask)
|
|
*p_lock_status = MPEG_LOCK;
|
|
else if ((sc_ra_ram_lock & fec_lock_mask) == fec_lock_mask)
|
|
*p_lock_status = FEC_LOCK;
|
|
else if ((sc_ra_ram_lock & demod_lock_mask) == demod_lock_mask)
|
|
*p_lock_status = DEMOD_LOCK;
|
|
else if (sc_ra_ram_lock & OFDM_SC_RA_RAM_LOCK_NODVBT__M)
|
|
*p_lock_status = NEVER_LOCK;
|
|
end:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int power_up_qam(struct drxk_state *state)
|
|
{
|
|
enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
status = ctrl_power_mode(state, &power_mode);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/* Power Down QAM */
|
|
static int power_down_qam(struct drxk_state *state)
|
|
{
|
|
u16 data = 0;
|
|
u16 cmd_result;
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
status = read16(state, SCU_COMM_EXEC__A, &data);
|
|
if (status < 0)
|
|
goto error;
|
|
if (data == SCU_COMM_EXEC_ACTIVE) {
|
|
/*
|
|
STOP demodulator
|
|
QAM and HW blocks
|
|
*/
|
|
/* stop all comstate->m_exec */
|
|
status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_STOP,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
/* powerdown AFE */
|
|
status = set_iqm_af(state, false);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Setup of the QAM Measurement intervals for signal quality
|
|
* \param demod instance of demod.
|
|
* \param modulation current modulation.
|
|
* \return DRXStatus_t.
|
|
*
|
|
* NOTE:
|
|
* Take into account that for certain settings the errorcounters can overflow.
|
|
* The implementation does not check this.
|
|
*
|
|
*/
|
|
static int set_qam_measurement(struct drxk_state *state,
|
|
enum e_drxk_constellation modulation,
|
|
u32 symbol_rate)
|
|
{
|
|
u32 fec_bits_desired = 0; /* BER accounting period */
|
|
u32 fec_rs_period_total = 0; /* Total period */
|
|
u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */
|
|
u16 fec_rs_period = 0; /* Value for corresponding I2C register */
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
fec_rs_prescale = 1;
|
|
/* fec_bits_desired = symbol_rate [kHz] *
|
|
FrameLenght [ms] *
|
|
(modulation + 1) *
|
|
SyncLoss (== 1) *
|
|
ViterbiLoss (==1)
|
|
*/
|
|
switch (modulation) {
|
|
case DRX_CONSTELLATION_QAM16:
|
|
fec_bits_desired = 4 * symbol_rate;
|
|
break;
|
|
case DRX_CONSTELLATION_QAM32:
|
|
fec_bits_desired = 5 * symbol_rate;
|
|
break;
|
|
case DRX_CONSTELLATION_QAM64:
|
|
fec_bits_desired = 6 * symbol_rate;
|
|
break;
|
|
case DRX_CONSTELLATION_QAM128:
|
|
fec_bits_desired = 7 * symbol_rate;
|
|
break;
|
|
case DRX_CONSTELLATION_QAM256:
|
|
fec_bits_desired = 8 * symbol_rate;
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
fec_bits_desired /= 1000; /* symbol_rate [Hz] -> symbol_rate [kHz] */
|
|
fec_bits_desired *= 500; /* meas. period [ms] */
|
|
|
|
/* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */
|
|
/* fec_rs_period_total = fec_bits_desired / 1632 */
|
|
fec_rs_period_total = (fec_bits_desired / 1632UL) + 1; /* roughly ceil */
|
|
|
|
/* fec_rs_period_total = fec_rs_prescale * fec_rs_period */
|
|
fec_rs_prescale = 1 + (u16) (fec_rs_period_total >> 16);
|
|
if (fec_rs_prescale == 0) {
|
|
/* Divide by zero (though impossible) */
|
|
status = -EINVAL;
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
fec_rs_period =
|
|
((u16) fec_rs_period_total +
|
|
(fec_rs_prescale >> 1)) / fec_rs_prescale;
|
|
|
|
/* write corresponding registers */
|
|
status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fec_rs_period);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A,
|
|
fec_rs_prescale);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fec_rs_period);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int set_qam16(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* QAM Equalizer Setup */
|
|
/* Equalizer */
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Decision Feedback Equalizer */
|
|
status = write16(state, QAM_DQ_QUAL_FUN0__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN1__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN2__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN3__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN4__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_SY_SYNC_HWM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_AWM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_LWM__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM Slicer Settings */
|
|
status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
|
|
DRXK_QAM_SL_SIG_POWER_QAM16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM Loop Controller Coeficients */
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM State Machine (FSM) Thresholds */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM FSM Tracking Parameters */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief QAM32 specific setup
|
|
* \param demod instance of demod.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int set_qam32(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* QAM Equalizer Setup */
|
|
/* Equalizer */
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Decision Feedback Equalizer */
|
|
status = write16(state, QAM_DQ_QUAL_FUN0__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN1__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN2__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN3__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_SY_SYNC_HWM__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_AWM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_LWM__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM Slicer Settings */
|
|
|
|
status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
|
|
DRXK_QAM_SL_SIG_POWER_QAM32);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM Loop Controller Coeficients */
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM State Machine (FSM) Thresholds */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM FSM Tracking Parameters */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief QAM64 specific setup
|
|
* \param demod instance of demod.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int set_qam64(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* QAM Equalizer Setup */
|
|
/* Equalizer */
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Decision Feedback Equalizer */
|
|
status = write16(state, QAM_DQ_QUAL_FUN0__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN1__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN2__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN3__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_SY_SYNC_HWM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_AWM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_LWM__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM Slicer Settings */
|
|
status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
|
|
DRXK_QAM_SL_SIG_POWER_QAM64);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM Loop Controller Coeficients */
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM State Machine (FSM) Thresholds */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM FSM Tracking Parameters */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief QAM128 specific setup
|
|
* \param demod: instance of demod.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int set_qam128(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* QAM Equalizer Setup */
|
|
/* Equalizer */
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Decision Feedback Equalizer */
|
|
status = write16(state, QAM_DQ_QUAL_FUN0__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN1__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN2__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN3__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN4__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_SY_SYNC_HWM__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_AWM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_LWM__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM Slicer Settings */
|
|
|
|
status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
|
|
DRXK_QAM_SL_SIG_POWER_QAM128);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM Loop Controller Coeficients */
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM State Machine (FSM) Thresholds */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM FSM Tracking Parameters */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief QAM256 specific setup
|
|
* \param demod: instance of demod.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int set_qam256(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* QAM Equalizer Setup */
|
|
/* Equalizer */
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Decision Feedback Equalizer */
|
|
status = write16(state, QAM_DQ_QUAL_FUN0__A, 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN1__A, 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN2__A, 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN3__A, 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN4__A, 6);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_SY_SYNC_HWM__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_AWM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_SYNC_LWM__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* QAM Slicer Settings */
|
|
|
|
status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
|
|
DRXK_QAM_SL_SIG_POWER_QAM256);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM Loop Controller Coeficients */
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM State Machine (FSM) Thresholds */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
|
|
/* QAM FSM Tracking Parameters */
|
|
|
|
status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
|
|
/*============================================================================*/
|
|
/*
|
|
* \brief Reset QAM block.
|
|
* \param demod: instance of demod.
|
|
* \param channel: pointer to channel data.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int qam_reset_qam(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
u16 cmd_result;
|
|
|
|
dprintk(1, "\n");
|
|
/* Stop QAM comstate->m_exec */
|
|
status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_RESET,
|
|
0, NULL, 1, &cmd_result);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Set QAM symbolrate.
|
|
* \param demod: instance of demod.
|
|
* \param channel: pointer to channel data.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
static int qam_set_symbolrate(struct drxk_state *state)
|
|
{
|
|
u32 adc_frequency = 0;
|
|
u32 symb_freq = 0;
|
|
u32 iqm_rc_rate = 0;
|
|
u16 ratesel = 0;
|
|
u32 lc_symb_rate = 0;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
/* Select & calculate correct IQM rate */
|
|
adc_frequency = (state->m_sys_clock_freq * 1000) / 3;
|
|
ratesel = 0;
|
|
if (state->props.symbol_rate <= 1188750)
|
|
ratesel = 3;
|
|
else if (state->props.symbol_rate <= 2377500)
|
|
ratesel = 2;
|
|
else if (state->props.symbol_rate <= 4755000)
|
|
ratesel = 1;
|
|
status = write16(state, IQM_FD_RATESEL__A, ratesel);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/*
|
|
IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23)
|
|
*/
|
|
symb_freq = state->props.symbol_rate * (1 << ratesel);
|
|
if (symb_freq == 0) {
|
|
/* Divide by zero */
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
iqm_rc_rate = (adc_frequency / symb_freq) * (1 << 21) +
|
|
(Frac28a((adc_frequency % symb_freq), symb_freq) >> 7) -
|
|
(1 << 23);
|
|
status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_iqm_rc_rate = iqm_rc_rate;
|
|
/*
|
|
LcSymbFreq = round (.125 * symbolrate / adc_freq * (1<<15))
|
|
*/
|
|
symb_freq = state->props.symbol_rate;
|
|
if (adc_frequency == 0) {
|
|
/* Divide by zero */
|
|
status = -EINVAL;
|
|
goto error;
|
|
}
|
|
lc_symb_rate = (symb_freq / adc_frequency) * (1 << 12) +
|
|
(Frac28a((symb_freq % adc_frequency), adc_frequency) >>
|
|
16);
|
|
if (lc_symb_rate > 511)
|
|
lc_symb_rate = 511;
|
|
status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lc_symb_rate);
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
/*============================================================================*/
|
|
|
|
/*
|
|
* \brief Get QAM lock status.
|
|
* \param demod: instance of demod.
|
|
* \param channel: pointer to channel data.
|
|
* \return DRXStatus_t.
|
|
*/
|
|
|
|
static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status)
|
|
{
|
|
int status;
|
|
u16 result[2] = { 0, 0 };
|
|
|
|
dprintk(1, "\n");
|
|
*p_lock_status = NOT_LOCKED;
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_QAM |
|
|
SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2,
|
|
result);
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) {
|
|
/* 0x0000 NOT LOCKED */
|
|
} else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) {
|
|
/* 0x4000 DEMOD LOCKED */
|
|
*p_lock_status = DEMOD_LOCK;
|
|
} else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) {
|
|
/* 0x8000 DEMOD + FEC LOCKED (system lock) */
|
|
*p_lock_status = MPEG_LOCK;
|
|
} else {
|
|
/* 0xC000 NEVER LOCKED */
|
|
/* (system will never be able to lock to the signal) */
|
|
/*
|
|
* TODO: check this, intermediate & standard specific lock
|
|
* states are not taken into account here
|
|
*/
|
|
*p_lock_status = NEVER_LOCK;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
#define QAM_MIRROR__M 0x03
|
|
#define QAM_MIRROR_NORMAL 0x00
|
|
#define QAM_MIRRORED 0x01
|
|
#define QAM_MIRROR_AUTO_ON 0x02
|
|
#define QAM_LOCKRANGE__M 0x10
|
|
#define QAM_LOCKRANGE_NORMAL 0x10
|
|
|
|
static int qam_demodulator_command(struct drxk_state *state,
|
|
int number_of_parameters)
|
|
{
|
|
int status;
|
|
u16 cmd_result;
|
|
u16 set_param_parameters[4] = { 0, 0, 0, 0 };
|
|
|
|
set_param_parameters[0] = state->m_constellation; /* modulation */
|
|
set_param_parameters[1] = DRXK_QAM_I12_J17; /* interleave mode */
|
|
|
|
if (number_of_parameters == 2) {
|
|
u16 set_env_parameters[1] = { 0 };
|
|
|
|
if (state->m_operation_mode == OM_QAM_ITU_C)
|
|
set_env_parameters[0] = QAM_TOP_ANNEX_C;
|
|
else
|
|
set_env_parameters[0] = QAM_TOP_ANNEX_A;
|
|
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV,
|
|
1, set_env_parameters, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
|
|
number_of_parameters, set_param_parameters,
|
|
1, &cmd_result);
|
|
} else if (number_of_parameters == 4) {
|
|
if (state->m_operation_mode == OM_QAM_ITU_C)
|
|
set_param_parameters[2] = QAM_TOP_ANNEX_C;
|
|
else
|
|
set_param_parameters[2] = QAM_TOP_ANNEX_A;
|
|
|
|
set_param_parameters[3] |= (QAM_MIRROR_AUTO_ON);
|
|
/* Env parameters */
|
|
/* check for LOCKRANGE Extended */
|
|
/* set_param_parameters[3] |= QAM_LOCKRANGE_NORMAL; */
|
|
|
|
status = scu_command(state,
|
|
SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
|
|
number_of_parameters, set_param_parameters,
|
|
1, &cmd_result);
|
|
} else {
|
|
pr_warn("Unknown QAM demodulator parameter count %d\n",
|
|
number_of_parameters);
|
|
status = -EINVAL;
|
|
}
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_warn("Warning %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz,
|
|
s32 tuner_freq_offset)
|
|
{
|
|
int status;
|
|
u16 cmd_result;
|
|
int qam_demod_param_count = state->qam_demod_parameter_count;
|
|
|
|
dprintk(1, "\n");
|
|
/*
|
|
* STEP 1: reset demodulator
|
|
* resets FEC DI and FEC RS
|
|
* resets QAM block
|
|
* resets SCU variables
|
|
*/
|
|
status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = qam_reset_qam(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/*
|
|
* STEP 2: configure demodulator
|
|
* -set params; resets IQM,QAM,FEC HW; initializes some
|
|
* SCU variables
|
|
*/
|
|
status = qam_set_symbolrate(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Set params */
|
|
switch (state->props.modulation) {
|
|
case QAM_256:
|
|
state->m_constellation = DRX_CONSTELLATION_QAM256;
|
|
break;
|
|
case QAM_AUTO:
|
|
case QAM_64:
|
|
state->m_constellation = DRX_CONSTELLATION_QAM64;
|
|
break;
|
|
case QAM_16:
|
|
state->m_constellation = DRX_CONSTELLATION_QAM16;
|
|
break;
|
|
case QAM_32:
|
|
state->m_constellation = DRX_CONSTELLATION_QAM32;
|
|
break;
|
|
case QAM_128:
|
|
state->m_constellation = DRX_CONSTELLATION_QAM128;
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
break;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Use the 4-parameter if it's requested or we're probing for
|
|
* the correct command. */
|
|
if (state->qam_demod_parameter_count == 4
|
|
|| !state->qam_demod_parameter_count) {
|
|
qam_demod_param_count = 4;
|
|
status = qam_demodulator_command(state, qam_demod_param_count);
|
|
}
|
|
|
|
/* Use the 2-parameter command if it was requested or if we're
|
|
* probing for the correct command and the 4-parameter command
|
|
* failed. */
|
|
if (state->qam_demod_parameter_count == 2
|
|
|| (!state->qam_demod_parameter_count && status < 0)) {
|
|
qam_demod_param_count = 2;
|
|
status = qam_demodulator_command(state, qam_demod_param_count);
|
|
}
|
|
|
|
if (status < 0) {
|
|
dprintk(1, "Could not set demodulator parameters.\n");
|
|
dprintk(1,
|
|
"Make sure qam_demod_parameter_count (%d) is correct for your firmware (%s).\n",
|
|
state->qam_demod_parameter_count,
|
|
state->microcode_name);
|
|
goto error;
|
|
} else if (!state->qam_demod_parameter_count) {
|
|
dprintk(1,
|
|
"Auto-probing the QAM command parameters was successful - using %d parameters.\n",
|
|
qam_demod_param_count);
|
|
|
|
/*
|
|
* One of our commands was successful. We don't need to
|
|
* auto-probe anymore, now that we got the correct command.
|
|
*/
|
|
state->qam_demod_parameter_count = qam_demod_param_count;
|
|
}
|
|
|
|
/*
|
|
* STEP 3: enable the system in a mode where the ADC provides valid
|
|
* signal setup modulation independent registers
|
|
*/
|
|
#if 0
|
|
status = set_frequency(channel, tuner_freq_offset));
|
|
if (status < 0)
|
|
goto error;
|
|
#endif
|
|
status = set_frequency_shifter(state, intermediate_freqk_hz,
|
|
tuner_freq_offset, true);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Setup BER measurement */
|
|
status = set_qam_measurement(state, state->m_constellation,
|
|
state->props.symbol_rate);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Reset default values */
|
|
status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Reset default LC values */
|
|
status = write16(state, QAM_LC_RATE_LIMIT__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_LPF_FACTORP__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_LPF_FACTORI__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_MODE__A, 7);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, QAM_LC_QUAL_TAB0__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB1__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB2__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB3__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB4__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB5__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB6__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB8__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB9__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB10__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB12__A, 2);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB15__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB16__A, 3);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB20__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_LC_QUAL_TAB25__A, 4);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Mirroring, QAM-block starting point not inverted */
|
|
status = write16(state, QAM_SY_SP_INV__A,
|
|
QAM_SY_SP_INV_SPECTRUM_INV_DIS);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Halt SCU to enable safe non-atomic accesses */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* STEP 4: modulation specific setup */
|
|
switch (state->props.modulation) {
|
|
case QAM_16:
|
|
status = set_qam16(state);
|
|
break;
|
|
case QAM_32:
|
|
status = set_qam32(state);
|
|
break;
|
|
case QAM_AUTO:
|
|
case QAM_64:
|
|
status = set_qam64(state);
|
|
break;
|
|
case QAM_128:
|
|
status = set_qam128(state);
|
|
break;
|
|
case QAM_256:
|
|
status = set_qam256(state);
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
break;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Activate SCU to enable SCU commands */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Re-configure MPEG output, requires knowledge of channel bitrate */
|
|
/* extAttr->currentChannel.modulation = channel->modulation; */
|
|
/* extAttr->currentChannel.symbolrate = channel->symbolrate; */
|
|
status = mpegts_dto_setup(state, state->m_operation_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* start processes */
|
|
status = mpegts_start(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */
|
|
status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
|
|
| SCU_RAM_COMMAND_CMD_DEMOD_START,
|
|
0, NULL, 1, &cmd_result);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* update global DRXK data container */
|
|
/*? extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */
|
|
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int set_qam_standard(struct drxk_state *state,
|
|
enum operation_mode o_mode)
|
|
{
|
|
int status;
|
|
#ifdef DRXK_QAM_TAPS
|
|
#define DRXK_QAMA_TAPS_SELECT
|
|
#include "drxk_filters.h"
|
|
#undef DRXK_QAMA_TAPS_SELECT
|
|
#endif
|
|
|
|
dprintk(1, "\n");
|
|
|
|
/* added antenna switch */
|
|
switch_antenna_to_qam(state);
|
|
|
|
/* Ensure correct power-up mode */
|
|
status = power_up_qam(state);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Reset QAM block */
|
|
status = qam_reset_qam(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Setup IQM */
|
|
|
|
status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Upload IQM Channel Filter settings by
|
|
boot loader from ROM table */
|
|
switch (o_mode) {
|
|
case OM_QAM_ITU_A:
|
|
status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A,
|
|
DRXK_BLCC_NR_ELEMENTS_TAPS,
|
|
DRXK_BLC_TIMEOUT);
|
|
break;
|
|
case OM_QAM_ITU_C:
|
|
status = bl_direct_cmd(state, IQM_CF_TAP_RE0__A,
|
|
DRXK_BL_ROM_OFFSET_TAPS_ITU_C,
|
|
DRXK_BLDC_NR_ELEMENTS_TAPS,
|
|
DRXK_BLC_TIMEOUT);
|
|
if (status < 0)
|
|
goto error;
|
|
status = bl_direct_cmd(state,
|
|
IQM_CF_TAP_IM0__A,
|
|
DRXK_BL_ROM_OFFSET_TAPS_ITU_C,
|
|
DRXK_BLDC_NR_ELEMENTS_TAPS,
|
|
DRXK_BLC_TIMEOUT);
|
|
break;
|
|
default:
|
|
status = -EINVAL;
|
|
}
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_CF_OUT_ENA__A, 1 << IQM_CF_OUT_ENA_QAM__B);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_SYMMETRIC__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_MIDTAP__A,
|
|
((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B)));
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_RC_STRETCH__A, 21);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_CLP_LEN__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_CLP_TH__A, 448);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_SNS_LEN__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, IQM_FS_ADJ_SEL__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_RC_ADJ_SEL__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_ADJ_SEL__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_UPD_SEL__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* IQM Impulse Noise Processing Unit */
|
|
status = write16(state, IQM_CF_CLP_VAL__A, 500);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_DATATH__A, 1000);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_BYPASSDET__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_DET_LCT__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_WND_LEN__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_CF_PKDTH__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_INC_BYPASS__A, 1);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* turn on IQMAF. Must be done before setAgc**() */
|
|
status = set_iqm_af(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, IQM_AF_START_LOCK__A, 0x01);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* IQM will not be reset from here, sync ADC and update/init AGC */
|
|
status = adc_synchronization(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Set the FSM step period */
|
|
status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Halt SCU to enable safe non-atomic accesses */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* No more resets of the IQM, current standard correctly set =>
|
|
now AGCs can be configured. */
|
|
|
|
status = init_agc(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_pre_saw(state, &(state->m_qam_pre_saw_cfg));
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Configure AGC's */
|
|
status = set_agc_rf(state, &(state->m_qam_rf_agc_cfg), true);
|
|
if (status < 0)
|
|
goto error;
|
|
status = set_agc_if(state, &(state->m_qam_if_agc_cfg), true);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Activate SCU to enable SCU commands */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int write_gpio(struct drxk_state *state)
|
|
{
|
|
int status;
|
|
u16 value = 0;
|
|
|
|
dprintk(1, "\n");
|
|
/* stop lock indicator process */
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Write magic word to enable pdr reg write */
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (state->m_has_sawsw) {
|
|
if (state->uio_mask & 0x0001) { /* UIO-1 */
|
|
/* write to io pad configuration register - output mode */
|
|
status = write16(state, SIO_PDR_SMA_TX_CFG__A,
|
|
state->m_gpio_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* use corresponding bit in io data output registar */
|
|
status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
|
|
if (status < 0)
|
|
goto error;
|
|
if ((state->m_gpio & 0x0001) == 0)
|
|
value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */
|
|
else
|
|
value |= 0x8000; /* write one to 15th bit - 1st UIO */
|
|
/* write back to io data output register */
|
|
status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
if (state->uio_mask & 0x0002) { /* UIO-2 */
|
|
/* write to io pad configuration register - output mode */
|
|
status = write16(state, SIO_PDR_SMA_RX_CFG__A,
|
|
state->m_gpio_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* use corresponding bit in io data output registar */
|
|
status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
|
|
if (status < 0)
|
|
goto error;
|
|
if ((state->m_gpio & 0x0002) == 0)
|
|
value &= 0xBFFF; /* write zero to 14th bit - 2st UIO */
|
|
else
|
|
value |= 0x4000; /* write one to 14th bit - 2st UIO */
|
|
/* write back to io data output register */
|
|
status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
if (state->uio_mask & 0x0004) { /* UIO-3 */
|
|
/* write to io pad configuration register - output mode */
|
|
status = write16(state, SIO_PDR_GPIO_CFG__A,
|
|
state->m_gpio_cfg);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* use corresponding bit in io data output registar */
|
|
status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
|
|
if (status < 0)
|
|
goto error;
|
|
if ((state->m_gpio & 0x0004) == 0)
|
|
value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */
|
|
else
|
|
value |= 0x0004; /* write one to 2nd bit - 3rd UIO */
|
|
/* write back to io data output register */
|
|
status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
}
|
|
/* Write magic word to disable pdr reg write */
|
|
status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int switch_antenna_to_qam(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
bool gpio_state;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (!state->antenna_gpio)
|
|
return 0;
|
|
|
|
gpio_state = state->m_gpio & state->antenna_gpio;
|
|
|
|
if (state->antenna_dvbt ^ gpio_state) {
|
|
/* Antenna is on DVB-T mode. Switch */
|
|
if (state->antenna_dvbt)
|
|
state->m_gpio &= ~state->antenna_gpio;
|
|
else
|
|
state->m_gpio |= state->antenna_gpio;
|
|
status = write_gpio(state);
|
|
}
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
static int switch_antenna_to_dvbt(struct drxk_state *state)
|
|
{
|
|
int status = 0;
|
|
bool gpio_state;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (!state->antenna_gpio)
|
|
return 0;
|
|
|
|
gpio_state = state->m_gpio & state->antenna_gpio;
|
|
|
|
if (!(state->antenna_dvbt ^ gpio_state)) {
|
|
/* Antenna is on DVB-C mode. Switch */
|
|
if (state->antenna_dvbt)
|
|
state->m_gpio |= state->antenna_gpio;
|
|
else
|
|
state->m_gpio &= ~state->antenna_gpio;
|
|
status = write_gpio(state);
|
|
}
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int power_down_device(struct drxk_state *state)
|
|
{
|
|
/* Power down to requested mode */
|
|
/* Backup some register settings */
|
|
/* Set pins with possible pull-ups connected to them in input mode */
|
|
/* Analog power down */
|
|
/* ADC power down */
|
|
/* Power down device */
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
if (state->m_b_p_down_open_bridge) {
|
|
/* Open I2C bridge before power down of DRXK */
|
|
status = ConfigureI2CBridge(state, true);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
/* driver 0.9.0 */
|
|
status = dvbt_enable_ofdm_token_ring(state, false);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = write16(state, SIO_CC_PWD_MODE__A,
|
|
SIO_CC_PWD_MODE_LEVEL_CLOCK);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_hi_cfg_ctrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
|
|
status = hi_cfg_command(state);
|
|
error:
|
|
if (status < 0)
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int init_drxk(struct drxk_state *state)
|
|
{
|
|
int status = 0, n = 0;
|
|
enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
|
|
u16 driver_version;
|
|
|
|
dprintk(1, "\n");
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED) {
|
|
drxk_i2c_lock(state);
|
|
status = power_up_device(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = drxx_open(state);
|
|
if (status < 0)
|
|
goto error;
|
|
/* Soft reset of OFDM-, sys- and osc-clockdomain */
|
|
status = write16(state, SIO_CC_SOFT_RST__A,
|
|
SIO_CC_SOFT_RST_OFDM__M
|
|
| SIO_CC_SOFT_RST_SYS__M
|
|
| SIO_CC_SOFT_RST_OSC__M);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
|
|
if (status < 0)
|
|
goto error;
|
|
/*
|
|
* TODO is this needed? If yes, how much delay in
|
|
* worst case scenario
|
|
*/
|
|
usleep_range(1000, 2000);
|
|
state->m_drxk_a3_patch_code = true;
|
|
status = get_device_capabilities(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Bridge delay, uses oscilator clock */
|
|
/* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */
|
|
/* SDA brdige delay */
|
|
state->m_hi_cfg_bridge_delay =
|
|
(u16) ((state->m_osc_clock_freq / 1000) *
|
|
HI_I2C_BRIDGE_DELAY) / 1000;
|
|
/* Clipping */
|
|
if (state->m_hi_cfg_bridge_delay >
|
|
SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) {
|
|
state->m_hi_cfg_bridge_delay =
|
|
SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
|
|
}
|
|
/* SCL bridge delay, same as SDA for now */
|
|
state->m_hi_cfg_bridge_delay +=
|
|
state->m_hi_cfg_bridge_delay <<
|
|
SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B;
|
|
|
|
status = init_hi(state);
|
|
if (status < 0)
|
|
goto error;
|
|
/* disable various processes */
|
|
#if NOA1ROM
|
|
if (!(state->m_DRXK_A1_ROM_CODE)
|
|
&& !(state->m_DRXK_A2_ROM_CODE))
|
|
#endif
|
|
{
|
|
status = write16(state, SCU_RAM_GPIO__A,
|
|
SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* disable MPEG port */
|
|
status = mpegts_disable(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Stop AUD and SCU */
|
|
status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* enable token-ring bus through OFDM block for possible ucode upload */
|
|
status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A,
|
|
SIO_OFDM_SH_OFDM_RING_ENABLE_ON);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* include boot loader section */
|
|
status = write16(state, SIO_BL_COMM_EXEC__A,
|
|
SIO_BL_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = bl_chain_cmd(state, 0, 6, 100);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
if (state->fw) {
|
|
status = download_microcode(state, state->fw->data,
|
|
state->fw->size);
|
|
if (status < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* disable token-ring bus through OFDM block for possible ucode upload */
|
|
status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A,
|
|
SIO_OFDM_SH_OFDM_RING_ENABLE_OFF);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Run SCU for a little while to initialize microcode version numbers */
|
|
status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
|
|
if (status < 0)
|
|
goto error;
|
|
status = drxx_open(state);
|
|
if (status < 0)
|
|
goto error;
|
|
/* added for test */
|
|
msleep(30);
|
|
|
|
power_mode = DRXK_POWER_DOWN_OFDM;
|
|
status = ctrl_power_mode(state, &power_mode);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* Stamp driver version number in SCU data RAM in BCD code
|
|
Done to enable field application engineers to retrieve drxdriver version
|
|
via I2C from SCU RAM.
|
|
Not using SCU command interface for SCU register access since no
|
|
microcode may be present.
|
|
*/
|
|
driver_version =
|
|
(((DRXK_VERSION_MAJOR / 100) % 10) << 12) +
|
|
(((DRXK_VERSION_MAJOR / 10) % 10) << 8) +
|
|
((DRXK_VERSION_MAJOR % 10) << 4) +
|
|
(DRXK_VERSION_MINOR % 10);
|
|
status = write16(state, SCU_RAM_DRIVER_VER_HI__A,
|
|
driver_version);
|
|
if (status < 0)
|
|
goto error;
|
|
driver_version =
|
|
(((DRXK_VERSION_PATCH / 1000) % 10) << 12) +
|
|
(((DRXK_VERSION_PATCH / 100) % 10) << 8) +
|
|
(((DRXK_VERSION_PATCH / 10) % 10) << 4) +
|
|
(DRXK_VERSION_PATCH % 10);
|
|
status = write16(state, SCU_RAM_DRIVER_VER_LO__A,
|
|
driver_version);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
pr_info("DRXK driver version %d.%d.%d\n",
|
|
DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR,
|
|
DRXK_VERSION_PATCH);
|
|
|
|
/*
|
|
* Dirty fix of default values for ROM/PATCH microcode
|
|
* Dirty because this fix makes it impossible to setup
|
|
* suitable values before calling DRX_Open. This solution
|
|
* requires changes to RF AGC speed to be done via the CTRL
|
|
* function after calling DRX_Open
|
|
*/
|
|
|
|
/* m_dvbt_rf_agc_cfg.speed = 3; */
|
|
|
|
/* Reset driver debug flags to 0 */
|
|
status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0);
|
|
if (status < 0)
|
|
goto error;
|
|
/* driver 0.9.0 */
|
|
/* Setup FEC OC:
|
|
NOTE: No more full FEC resets allowed afterwards!! */
|
|
status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP);
|
|
if (status < 0)
|
|
goto error;
|
|
/* MPEGTS functions are still the same */
|
|
status = mpegts_dto_init(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = mpegts_stop(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = mpegts_configure_polarity(state);
|
|
if (status < 0)
|
|
goto error;
|
|
status = mpegts_configure_pins(state, state->m_enable_mpeg_output);
|
|
if (status < 0)
|
|
goto error;
|
|
/* added: configure GPIO */
|
|
status = write_gpio(state);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
state->m_drxk_state = DRXK_STOPPED;
|
|
|
|
if (state->m_b_power_down) {
|
|
status = power_down_device(state);
|
|
if (status < 0)
|
|
goto error;
|
|
state->m_drxk_state = DRXK_POWERED_DOWN;
|
|
} else
|
|
state->m_drxk_state = DRXK_STOPPED;
|
|
|
|
/* Initialize the supported delivery systems */
|
|
n = 0;
|
|
if (state->m_has_dvbc) {
|
|
state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A;
|
|
state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C;
|
|
strlcat(state->frontend.ops.info.name, " DVB-C",
|
|
sizeof(state->frontend.ops.info.name));
|
|
}
|
|
if (state->m_has_dvbt) {
|
|
state->frontend.ops.delsys[n++] = SYS_DVBT;
|
|
strlcat(state->frontend.ops.info.name, " DVB-T",
|
|
sizeof(state->frontend.ops.info.name));
|
|
}
|
|
drxk_i2c_unlock(state);
|
|
}
|
|
error:
|
|
if (status < 0) {
|
|
state->m_drxk_state = DRXK_NO_DEV;
|
|
drxk_i2c_unlock(state);
|
|
pr_err("Error %d on %s\n", status, __func__);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static void load_firmware_cb(const struct firmware *fw,
|
|
void *context)
|
|
{
|
|
struct drxk_state *state = context;
|
|
|
|
dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded");
|
|
if (!fw) {
|
|
pr_err("Could not load firmware file %s.\n",
|
|
state->microcode_name);
|
|
pr_info("Copy %s to your hotplug directory!\n",
|
|
state->microcode_name);
|
|
state->microcode_name = NULL;
|
|
|
|
/*
|
|
* As firmware is now load asynchronous, it is not possible
|
|
* anymore to fail at frontend attach. We might silently
|
|
* return here, and hope that the driver won't crash.
|
|
* We might also change all DVB callbacks to return -ENODEV
|
|
* if the device is not initialized.
|
|
* As the DRX-K devices have their own internal firmware,
|
|
* let's just hope that it will match a firmware revision
|
|
* compatible with this driver and proceed.
|
|
*/
|
|
}
|
|
state->fw = fw;
|
|
|
|
init_drxk(state);
|
|
}
|
|
|
|
static void drxk_release(struct dvb_frontend *fe)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
|
|
dprintk(1, "\n");
|
|
release_firmware(state->fw);
|
|
|
|
kfree(state);
|
|
}
|
|
|
|
static int drxk_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return 0;
|
|
|
|
shut_down(state);
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
|
|
dprintk(1, ": %s\n", enable ? "enable" : "disable");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
|
|
return ConfigureI2CBridge(state, enable ? true : false);
|
|
}
|
|
|
|
static int drxk_set_parameters(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
u32 delsys = p->delivery_system, old_delsys;
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
u32 IF;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
if (!fe->ops.tuner_ops.get_if_frequency) {
|
|
pr_err("Error: get_if_frequency() not defined at tuner. Can't work without it!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
old_delsys = state->props.delivery_system;
|
|
state->props = *p;
|
|
|
|
if (old_delsys != delsys) {
|
|
shut_down(state);
|
|
switch (delsys) {
|
|
case SYS_DVBC_ANNEX_A:
|
|
case SYS_DVBC_ANNEX_C:
|
|
if (!state->m_has_dvbc)
|
|
return -EINVAL;
|
|
state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ?
|
|
true : false;
|
|
if (state->m_itut_annex_c)
|
|
setoperation_mode(state, OM_QAM_ITU_C);
|
|
else
|
|
setoperation_mode(state, OM_QAM_ITU_A);
|
|
break;
|
|
case SYS_DVBT:
|
|
if (!state->m_has_dvbt)
|
|
return -EINVAL;
|
|
setoperation_mode(state, OM_DVBT);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
|
|
start(state, 0, IF);
|
|
|
|
/* After set_frontend, stats aren't available */
|
|
p->strength.stat[0].scale = FE_SCALE_RELATIVE;
|
|
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_strength(struct drxk_state *state, u64 *strength)
|
|
{
|
|
int status;
|
|
struct s_cfg_agc rf_agc, if_agc;
|
|
u32 total_gain = 0;
|
|
u32 atten = 0;
|
|
u32 agc_range = 0;
|
|
u16 scu_lvl = 0;
|
|
u16 scu_coc = 0;
|
|
/* FIXME: those are part of the tuner presets */
|
|
u16 tuner_rf_gain = 50; /* Default value on az6007 driver */
|
|
u16 tuner_if_gain = 40; /* Default value on az6007 driver */
|
|
|
|
*strength = 0;
|
|
|
|
if (is_dvbt(state)) {
|
|
rf_agc = state->m_dvbt_rf_agc_cfg;
|
|
if_agc = state->m_dvbt_if_agc_cfg;
|
|
} else if (is_qam(state)) {
|
|
rf_agc = state->m_qam_rf_agc_cfg;
|
|
if_agc = state->m_qam_if_agc_cfg;
|
|
} else {
|
|
rf_agc = state->m_atv_rf_agc_cfg;
|
|
if_agc = state->m_atv_if_agc_cfg;
|
|
}
|
|
|
|
if (rf_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) {
|
|
/* SCU output_level */
|
|
status = read16(state, SCU_RAM_AGC_RF_IACCU_HI__A, &scu_lvl);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
/* SCU c.o.c. */
|
|
status = read16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, &scu_coc);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (((u32) scu_lvl + (u32) scu_coc) < 0xffff)
|
|
rf_agc.output_level = scu_lvl + scu_coc;
|
|
else
|
|
rf_agc.output_level = 0xffff;
|
|
|
|
/* Take RF gain into account */
|
|
total_gain += tuner_rf_gain;
|
|
|
|
/* clip output value */
|
|
if (rf_agc.output_level < rf_agc.min_output_level)
|
|
rf_agc.output_level = rf_agc.min_output_level;
|
|
if (rf_agc.output_level > rf_agc.max_output_level)
|
|
rf_agc.output_level = rf_agc.max_output_level;
|
|
|
|
agc_range = (u32) (rf_agc.max_output_level - rf_agc.min_output_level);
|
|
if (agc_range > 0) {
|
|
atten += 100UL *
|
|
((u32)(tuner_rf_gain)) *
|
|
((u32)(rf_agc.output_level - rf_agc.min_output_level))
|
|
/ agc_range;
|
|
}
|
|
}
|
|
|
|
if (if_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) {
|
|
status = read16(state, SCU_RAM_AGC_IF_IACCU_HI__A,
|
|
&if_agc.output_level);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
status = read16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A,
|
|
&if_agc.top);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
/* Take IF gain into account */
|
|
total_gain += (u32) tuner_if_gain;
|
|
|
|
/* clip output value */
|
|
if (if_agc.output_level < if_agc.min_output_level)
|
|
if_agc.output_level = if_agc.min_output_level;
|
|
if (if_agc.output_level > if_agc.max_output_level)
|
|
if_agc.output_level = if_agc.max_output_level;
|
|
|
|
agc_range = (u32)(if_agc.max_output_level - if_agc.min_output_level);
|
|
if (agc_range > 0) {
|
|
atten += 100UL *
|
|
((u32)(tuner_if_gain)) *
|
|
((u32)(if_agc.output_level - if_agc.min_output_level))
|
|
/ agc_range;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Convert to 0..65535 scale.
|
|
* If it can't be measured (AGC is disabled), just show 100%.
|
|
*/
|
|
if (total_gain > 0)
|
|
*strength = (65535UL * atten / total_gain / 100);
|
|
else
|
|
*strength = 65535;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_get_stats(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
int status;
|
|
u32 stat;
|
|
u16 reg16;
|
|
u32 post_bit_count;
|
|
u32 post_bit_err_count;
|
|
u32 post_bit_error_scale;
|
|
u32 pre_bit_err_count;
|
|
u32 pre_bit_count;
|
|
u32 pkt_count;
|
|
u32 pkt_error_count;
|
|
s32 cnr;
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
/* get status */
|
|
state->fe_status = 0;
|
|
get_lock_status(state, &stat);
|
|
if (stat == MPEG_LOCK)
|
|
state->fe_status |= 0x1f;
|
|
if (stat == FEC_LOCK)
|
|
state->fe_status |= 0x0f;
|
|
if (stat == DEMOD_LOCK)
|
|
state->fe_status |= 0x07;
|
|
|
|
/*
|
|
* Estimate signal strength from AGC
|
|
*/
|
|
get_strength(state, &c->strength.stat[0].uvalue);
|
|
c->strength.stat[0].scale = FE_SCALE_RELATIVE;
|
|
|
|
|
|
if (stat >= DEMOD_LOCK) {
|
|
get_signal_to_noise(state, &cnr);
|
|
c->cnr.stat[0].svalue = cnr * 100;
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
if (stat < FEC_LOCK) {
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
return 0;
|
|
}
|
|
|
|
/* Get post BER */
|
|
|
|
/* BER measurement is valid if at least FEC lock is achieved */
|
|
|
|
/*
|
|
* OFDM_EC_VD_REQ_SMB_CNT__A and/or OFDM_EC_VD_REQ_BIT_CNT can be
|
|
* written to set nr of symbols or bits over which to measure
|
|
* EC_VD_REG_ERR_BIT_CNT__A . See CtrlSetCfg().
|
|
*/
|
|
|
|
/* Read registers for post/preViterbi BER calculation */
|
|
status = read16(state, OFDM_EC_VD_ERR_BIT_CNT__A, ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
pre_bit_err_count = reg16;
|
|
|
|
status = read16(state, OFDM_EC_VD_IN_BIT_CNT__A , ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
pre_bit_count = reg16;
|
|
|
|
/* Number of bit-errors */
|
|
status = read16(state, FEC_RS_NR_BIT_ERRORS__A, ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
post_bit_err_count = reg16;
|
|
|
|
status = read16(state, FEC_RS_MEASUREMENT_PRESCALE__A, ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
post_bit_error_scale = reg16;
|
|
|
|
status = read16(state, FEC_RS_MEASUREMENT_PERIOD__A, ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
pkt_count = reg16;
|
|
|
|
status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, ®16);
|
|
if (status < 0)
|
|
goto error;
|
|
pkt_error_count = reg16;
|
|
write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
|
|
|
|
post_bit_err_count *= post_bit_error_scale;
|
|
|
|
post_bit_count = pkt_count * 204 * 8;
|
|
|
|
/* Store the results */
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue += pkt_error_count;
|
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_count.stat[0].uvalue += pkt_count;
|
|
|
|
c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->pre_bit_error.stat[0].uvalue += pre_bit_err_count;
|
|
c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->pre_bit_count.stat[0].uvalue += pre_bit_count;
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue += post_bit_err_count;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue += post_bit_count;
|
|
|
|
error:
|
|
return status;
|
|
}
|
|
|
|
|
|
static int drxk_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
int rc;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
rc = drxk_get_stats(fe);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
*status = state->fe_status;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_read_signal_strength(struct dvb_frontend *fe,
|
|
u16 *strength)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
*strength = c->strength.stat[0].uvalue;
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
s32 snr2;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
get_signal_to_noise(state, &snr2);
|
|
|
|
/* No negative SNR, clip to zero */
|
|
if (snr2 < 0)
|
|
snr2 = 0;
|
|
*snr = snr2 & 0xffff;
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
u16 err;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
dvbtqam_get_acc_pkt_err(state, &err);
|
|
*ucblocks = (u32) err;
|
|
return 0;
|
|
}
|
|
|
|
static int drxk_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *sets)
|
|
{
|
|
struct drxk_state *state = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
|
|
dprintk(1, "\n");
|
|
|
|
if (state->m_drxk_state == DRXK_NO_DEV)
|
|
return -ENODEV;
|
|
if (state->m_drxk_state == DRXK_UNINITIALIZED)
|
|
return -EAGAIN;
|
|
|
|
switch (p->delivery_system) {
|
|
case SYS_DVBC_ANNEX_A:
|
|
case SYS_DVBC_ANNEX_C:
|
|
case SYS_DVBT:
|
|
sets->min_delay_ms = 3000;
|
|
sets->max_drift = 0;
|
|
sets->step_size = 0;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct dvb_frontend_ops drxk_ops = {
|
|
/* .delsys will be filled dynamically */
|
|
.info = {
|
|
.name = "DRXK",
|
|
.frequency_min_hz = 47 * MHz,
|
|
.frequency_max_hz = 865 * MHz,
|
|
/* For DVB-C */
|
|
.symbol_rate_min = 870000,
|
|
.symbol_rate_max = 11700000,
|
|
/* For DVB-T */
|
|
.frequency_stepsize_hz = 166667,
|
|
|
|
.caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
|
|
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO
|
|
},
|
|
|
|
.release = drxk_release,
|
|
.sleep = drxk_sleep,
|
|
.i2c_gate_ctrl = drxk_gate_ctrl,
|
|
|
|
.set_frontend = drxk_set_parameters,
|
|
.get_tune_settings = drxk_get_tune_settings,
|
|
|
|
.read_status = drxk_read_status,
|
|
.read_signal_strength = drxk_read_signal_strength,
|
|
.read_snr = drxk_read_snr,
|
|
.read_ucblocks = drxk_read_ucblocks,
|
|
};
|
|
|
|
struct dvb_frontend *drxk_attach(const struct drxk_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct dtv_frontend_properties *p;
|
|
struct drxk_state *state = NULL;
|
|
u8 adr = config->adr;
|
|
int status;
|
|
|
|
dprintk(1, "\n");
|
|
state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL);
|
|
if (!state)
|
|
return NULL;
|
|
|
|
state->i2c = i2c;
|
|
state->demod_address = adr;
|
|
state->single_master = config->single_master;
|
|
state->microcode_name = config->microcode_name;
|
|
state->qam_demod_parameter_count = config->qam_demod_parameter_count;
|
|
state->no_i2c_bridge = config->no_i2c_bridge;
|
|
state->antenna_gpio = config->antenna_gpio;
|
|
state->antenna_dvbt = config->antenna_dvbt;
|
|
state->m_chunk_size = config->chunk_size;
|
|
state->enable_merr_cfg = config->enable_merr_cfg;
|
|
|
|
if (config->dynamic_clk) {
|
|
state->m_dvbt_static_clk = false;
|
|
state->m_dvbc_static_clk = false;
|
|
} else {
|
|
state->m_dvbt_static_clk = true;
|
|
state->m_dvbc_static_clk = true;
|
|
}
|
|
|
|
|
|
if (config->mpeg_out_clk_strength)
|
|
state->m_ts_clockk_strength = config->mpeg_out_clk_strength & 0x07;
|
|
else
|
|
state->m_ts_clockk_strength = 0x06;
|
|
|
|
if (config->parallel_ts)
|
|
state->m_enable_parallel = true;
|
|
else
|
|
state->m_enable_parallel = false;
|
|
|
|
/* NOTE: as more UIO bits will be used, add them to the mask */
|
|
state->uio_mask = config->antenna_gpio;
|
|
|
|
/* Default gpio to DVB-C */
|
|
if (!state->antenna_dvbt && state->antenna_gpio)
|
|
state->m_gpio |= state->antenna_gpio;
|
|
else
|
|
state->m_gpio &= ~state->antenna_gpio;
|
|
|
|
mutex_init(&state->mutex);
|
|
|
|
memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
init_state(state);
|
|
|
|
/* Load firmware and initialize DRX-K */
|
|
if (state->microcode_name) {
|
|
const struct firmware *fw = NULL;
|
|
|
|
status = request_firmware(&fw, state->microcode_name,
|
|
state->i2c->dev.parent);
|
|
if (status < 0)
|
|
fw = NULL;
|
|
load_firmware_cb(fw, state);
|
|
} else if (init_drxk(state) < 0)
|
|
goto error;
|
|
|
|
|
|
/* Initialize stats */
|
|
p = &state->frontend.dtv_property_cache;
|
|
p->strength.len = 1;
|
|
p->cnr.len = 1;
|
|
p->block_error.len = 1;
|
|
p->block_count.len = 1;
|
|
p->pre_bit_error.len = 1;
|
|
p->pre_bit_count.len = 1;
|
|
p->post_bit_error.len = 1;
|
|
p->post_bit_count.len = 1;
|
|
|
|
p->strength.stat[0].scale = FE_SCALE_RELATIVE;
|
|
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
pr_info("frontend initialized.\n");
|
|
return &state->frontend;
|
|
|
|
error:
|
|
pr_err("not found\n");
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(drxk_attach);
|
|
|
|
MODULE_DESCRIPTION("DRX-K driver");
|
|
MODULE_AUTHOR("Ralph Metzler");
|
|
MODULE_LICENSE("GPL");
|