201 lines
4.4 KiB
C
201 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* drivers/net/phy/rockchip.c
|
|
*
|
|
* Driver for ROCKCHIP Ethernet PHYs
|
|
*
|
|
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
|
|
*
|
|
* David Wu <david.wu@rock-chips.com>
|
|
*/
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/phy.h>
|
|
|
|
#define INTERNAL_EPHY_ID 0x1234d400
|
|
|
|
#define MII_INTERNAL_CTRL_STATUS 17
|
|
#define SMI_ADDR_TSTCNTL 20
|
|
#define SMI_ADDR_TSTREAD1 21
|
|
#define SMI_ADDR_TSTREAD2 22
|
|
#define SMI_ADDR_TSTWRITE 23
|
|
#define MII_SPECIAL_CONTROL_STATUS 31
|
|
|
|
#define MII_AUTO_MDIX_EN BIT(7)
|
|
#define MII_MDIX_EN BIT(6)
|
|
|
|
#define MII_SPEED_10 BIT(2)
|
|
#define MII_SPEED_100 BIT(3)
|
|
|
|
#define TSTCNTL_RD (BIT(15) | BIT(10))
|
|
#define TSTCNTL_WR (BIT(14) | BIT(10))
|
|
|
|
#define TSTMODE_ENABLE 0x400
|
|
#define TSTMODE_DISABLE 0x0
|
|
|
|
#define WR_ADDR_A7CFG 0x18
|
|
|
|
static int rockchip_init_tstmode(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable access to Analog and DSP register banks */
|
|
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE);
|
|
}
|
|
|
|
static int rockchip_close_tstmode(struct phy_device *phydev)
|
|
{
|
|
/* Back to basic register bank */
|
|
return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE);
|
|
}
|
|
|
|
static int rockchip_integrated_phy_analog_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = rockchip_init_tstmode(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Adjust tx amplitude to make sginal better,
|
|
* the default value is 0x8.
|
|
*/
|
|
ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB);
|
|
if (ret)
|
|
return ret;
|
|
ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return rockchip_close_tstmode(phydev);
|
|
}
|
|
|
|
static int rockchip_integrated_phy_config_init(struct phy_device *phydev)
|
|
{
|
|
int val, ret;
|
|
|
|
/*
|
|
* The auto MIDX has linked problem on some board,
|
|
* workround to disable auto MDIX.
|
|
*/
|
|
val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
|
|
if (val < 0)
|
|
return val;
|
|
val &= ~MII_AUTO_MDIX_EN;
|
|
ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return rockchip_integrated_phy_analog_init(phydev);
|
|
}
|
|
|
|
static void rockchip_link_change_notify(struct phy_device *phydev)
|
|
{
|
|
/*
|
|
* If mode switch happens from 10BT to 100BT, all DSP/AFE
|
|
* registers are set to default values. So any AFE/DSP
|
|
* registers have to be re-initialized in this case.
|
|
*/
|
|
if (phydev->state == PHY_RUNNING && phydev->speed == SPEED_100) {
|
|
int ret = rockchip_integrated_phy_analog_init(phydev);
|
|
|
|
if (ret)
|
|
phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static int rockchip_set_polarity(struct phy_device *phydev, int polarity)
|
|
{
|
|
int reg, err, val;
|
|
|
|
/* get the current settings */
|
|
reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~MII_AUTO_MDIX_EN;
|
|
val = reg;
|
|
switch (polarity) {
|
|
case ETH_TP_MDI:
|
|
val &= ~MII_MDIX_EN;
|
|
break;
|
|
case ETH_TP_MDI_X:
|
|
val |= MII_MDIX_EN;
|
|
break;
|
|
case ETH_TP_MDI_AUTO:
|
|
case ETH_TP_MDI_INVALID:
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (val != reg) {
|
|
/* Set the new polarity value in the register */
|
|
err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = rockchip_set_polarity(phydev, phydev->mdix);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int rockchip_phy_resume(struct phy_device *phydev)
|
|
{
|
|
genphy_resume(phydev);
|
|
|
|
return rockchip_integrated_phy_config_init(phydev);
|
|
}
|
|
|
|
static struct phy_driver rockchip_phy_driver[] = {
|
|
{
|
|
.phy_id = INTERNAL_EPHY_ID,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Rockchip integrated EPHY",
|
|
/* PHY_BASIC_FEATURES */
|
|
.flags = 0,
|
|
.link_change_notify = rockchip_link_change_notify,
|
|
.soft_reset = genphy_soft_reset,
|
|
.config_init = rockchip_integrated_phy_config_init,
|
|
.config_aneg = rockchip_config_aneg,
|
|
.suspend = genphy_suspend,
|
|
.resume = rockchip_phy_resume,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(rockchip_phy_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = {
|
|
{ INTERNAL_EPHY_ID, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl);
|
|
|
|
MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>");
|
|
MODULE_DESCRIPTION("Rockchip Ethernet PHY driver");
|
|
MODULE_LICENSE("GPL");
|