f7da884578
This commit allow the driver to work with device-tree. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com> Acked-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
134 lines
3.3 KiB
C
134 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* BME680 - SPI Driver
|
|
*
|
|
* Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
|
|
*/
|
|
#include <linux/acpi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include "bme680.h"
|
|
|
|
static int bme680_regmap_spi_write(void *context, const void *data,
|
|
size_t count)
|
|
{
|
|
struct spi_device *spi = context;
|
|
u8 buf[2];
|
|
|
|
memcpy(buf, data, 2);
|
|
/*
|
|
* The SPI register address (= full register address without bit 7)
|
|
* and the write command (bit7 = RW = '0')
|
|
*/
|
|
buf[0] &= ~0x80;
|
|
|
|
return spi_write_then_read(spi, buf, 2, NULL, 0);
|
|
}
|
|
|
|
static int bme680_regmap_spi_read(void *context, const void *reg,
|
|
size_t reg_size, void *val, size_t val_size)
|
|
{
|
|
struct spi_device *spi = context;
|
|
|
|
return spi_write_then_read(spi, reg, reg_size, val, val_size);
|
|
}
|
|
|
|
static struct regmap_bus bme680_regmap_bus = {
|
|
.write = bme680_regmap_spi_write,
|
|
.read = bme680_regmap_spi_read,
|
|
.reg_format_endian_default = REGMAP_ENDIAN_BIG,
|
|
.val_format_endian_default = REGMAP_ENDIAN_BIG,
|
|
};
|
|
|
|
static int bme680_spi_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
struct regmap *regmap;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
spi->bits_per_word = 8;
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "spi_setup failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
|
|
&spi->dev, &bme680_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&spi->dev, "Failed to register spi regmap %d\n",
|
|
(int)PTR_ERR(regmap));
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
|
|
BME680_CMD_SOFTRESET);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "Failed to reset chip\n");
|
|
return ret;
|
|
}
|
|
|
|
/* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
|
|
ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "Error reading SPI chip ID\n");
|
|
return ret;
|
|
}
|
|
|
|
if (val != BME680_CHIP_ID_VAL) {
|
|
dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
|
|
val, BME680_CHIP_ID_VAL);
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* select Page 1 of spi_mem_page to enable access to
|
|
* to registers from address 0x00 to 0x7F.
|
|
*/
|
|
ret = regmap_write_bits(regmap, BME680_REG_STATUS,
|
|
BME680_SPI_MEM_PAGE_BIT,
|
|
BME680_SPI_MEM_PAGE_1_VAL);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
|
|
return ret;
|
|
}
|
|
|
|
return bme680_core_probe(&spi->dev, regmap, id->name);
|
|
}
|
|
|
|
static const struct spi_device_id bme680_spi_id[] = {
|
|
{"bme680", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, bme680_spi_id);
|
|
|
|
static const struct acpi_device_id bme680_acpi_match[] = {
|
|
{"BME0680", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
|
|
|
|
static const struct of_device_id bme680_of_spi_match[] = {
|
|
{ .compatible = "bosch,bme680", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
|
|
|
|
static struct spi_driver bme680_spi_driver = {
|
|
.driver = {
|
|
.name = "bme680_spi",
|
|
.acpi_match_table = ACPI_PTR(bme680_acpi_match),
|
|
.of_match_table = bme680_of_spi_match,
|
|
},
|
|
.probe = bme680_spi_probe,
|
|
.id_table = bme680_spi_id,
|
|
};
|
|
module_spi_driver(bme680_spi_driver);
|
|
|
|
MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
|
|
MODULE_DESCRIPTION("Bosch BME680 SPI driver");
|
|
MODULE_LICENSE("GPL v2");
|