linux/arch/arm/boot/dts/imx53-evk.dts

127 lines
2.5 KiB
Plaintext

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx53.dtsi"
/ {
model = "Freescale i.MX53 Evaluation Kit";
compatible = "fsl,imx53-evk", "fsl,imx53";
memory {
reg = <0x70000000 0x80000000>;
};
leds {
compatible = "gpio-leds";
green {
label = "Heartbeat";
gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
flash: at45db321d@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
spi-max-frequency = <25000000>;
reg = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0x3c0000>;
};
};
};
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
compatible = "fsl,mc13892", "fsl,mc13xxx";
reg = <0x08>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};