linux/arch/arm/boot/dts/imx53-mba53.dts

130 lines
2.7 KiB
Plaintext

/*
* Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx53-tqma53.dtsi"
/ {
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
};
&iomuxc {
lvds1 {
pinctrl_lvds1_1: lvds1-grp1 {
fsl,pins = <730 0x10000 /* LVDS0_TX3 */
732 0x10000 /* LVDS0_CLK */
734 0x10000 /* LVDS0_TX2 */
736 0x10000 /* LVDS0_TX1 */
738 0x10000>; /* LVDS0_TX0 */
};
pinctrl_lvds1_2: lvds1-grp2 {
fsl,pins = <720 0x10000 /* LVDS1_TX3 */
722 0x10000 /* LVDS1_TX2 */
724 0x10000 /* LVDS1_CLK */
726 0x10000 /* LVDS1_TX1 */
728 0x10000>; /* LVDS1_TX0 */
};
};
disp1 {
pinctrl_disp1_1: disp1-grp1 {
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */
570 0x10000 /* DISP1_DAT_17 */
575 0x10000 /* DISP1_DAT_16 */
580 0x10000 /* DISP1_DAT_15 */
585 0x10000 /* DISP1_DAT_14 */
590 0x10000 /* DISP1_DAT_13 */
595 0x10000 /* DISP1_DAT_12 */
628 0x10000 /* DISP1_DAT_11 */
634 0x10000 /* DISP1_DAT_10 */
639 0x10000 /* DISP1_DAT_9 */
644 0x10000 /* DISP1_DAT_8 */
649 0x10000 /* DISP1_DAT_7 */
654 0x10000 /* DISP1_DAT_6 */
659 0x10000 /* DISP1_DAT_5 */
664 0x10000 /* DISP1_DAT_4 */
669 0x10000 /* DISP1_DAT_3 */
674 0x10000 /* DISP1_DAT_2 */
679 0x10000 /* DISP1_DAT_1 */
684 0x10000>; /* DISP1_DAT_0 */
};
};
};
&cspi {
status = "okay";
};
&i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
};
expander: pca9554@20 {
compatible = "pca9554";
reg = <0x20>;
interrupts = <109>;
};
sensor2: lm75@49 {
compatible = "lm75";
reg = <0x49>;
};
};
&fec {
status = "okay";
};
&esdhc2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&ecspi1 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&can1 {
status = "okay";
};
&can2 {
status = "okay";
};
&i2c3 {
status = "okay";
};