6fa41b31f9
Based on 1 normalized pattern(s): derived from gplv2+ licensed source [copyright] [c] [2008] [wondermedia] [technologies] [inc] this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 or at your option any later version as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071900.028616342@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
471 lines
11 KiB
C
471 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Wondermedia I2C Master Mode Driver
|
|
*
|
|
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
|
|
*
|
|
* Derived from GPLv2+ licensed source:
|
|
* - Copyright (C) 2008 WonderMedia Technologies, Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define REG_CR 0x00
|
|
#define REG_TCR 0x02
|
|
#define REG_CSR 0x04
|
|
#define REG_ISR 0x06
|
|
#define REG_IMR 0x08
|
|
#define REG_CDR 0x0A
|
|
#define REG_TR 0x0C
|
|
#define REG_MCR 0x0E
|
|
#define REG_SLAVE_CR 0x10
|
|
#define REG_SLAVE_SR 0x12
|
|
#define REG_SLAVE_ISR 0x14
|
|
#define REG_SLAVE_IMR 0x16
|
|
#define REG_SLAVE_DR 0x18
|
|
#define REG_SLAVE_TR 0x1A
|
|
|
|
/* REG_CR Bit fields */
|
|
#define CR_TX_NEXT_ACK 0x0000
|
|
#define CR_ENABLE 0x0001
|
|
#define CR_TX_NEXT_NO_ACK 0x0002
|
|
#define CR_TX_END 0x0004
|
|
#define CR_CPU_RDY 0x0008
|
|
#define SLAV_MODE_SEL 0x8000
|
|
|
|
/* REG_TCR Bit fields */
|
|
#define TCR_STANDARD_MODE 0x0000
|
|
#define TCR_MASTER_WRITE 0x0000
|
|
#define TCR_HS_MODE 0x2000
|
|
#define TCR_MASTER_READ 0x4000
|
|
#define TCR_FAST_MODE 0x8000
|
|
#define TCR_SLAVE_ADDR_MASK 0x007F
|
|
|
|
/* REG_ISR Bit fields */
|
|
#define ISR_NACK_ADDR 0x0001
|
|
#define ISR_BYTE_END 0x0002
|
|
#define ISR_SCL_TIMEOUT 0x0004
|
|
#define ISR_WRITE_ALL 0x0007
|
|
|
|
/* REG_IMR Bit fields */
|
|
#define IMR_ENABLE_ALL 0x0007
|
|
|
|
/* REG_CSR Bit fields */
|
|
#define CSR_RCV_NOT_ACK 0x0001
|
|
#define CSR_RCV_ACK_MASK 0x0001
|
|
#define CSR_READY_MASK 0x0002
|
|
|
|
/* REG_TR */
|
|
#define SCL_TIMEOUT(x) (((x) & 0xFF) << 8)
|
|
#define TR_STD 0x0064
|
|
#define TR_HS 0x0019
|
|
|
|
/* REG_MCR */
|
|
#define MCR_APB_96M 7
|
|
#define MCR_APB_166M 12
|
|
|
|
#define I2C_MODE_STANDARD 0
|
|
#define I2C_MODE_FAST 1
|
|
|
|
#define WMT_I2C_TIMEOUT (msecs_to_jiffies(1000))
|
|
|
|
struct wmt_i2c_dev {
|
|
struct i2c_adapter adapter;
|
|
struct completion complete;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
int mode;
|
|
int irq;
|
|
u16 cmd_status;
|
|
};
|
|
|
|
static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + WMT_I2C_TIMEOUT;
|
|
while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
|
|
return -EBUSY;
|
|
}
|
|
msleep(20);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (i2c_dev->cmd_status & ISR_NACK_ADDR)
|
|
ret = -EIO;
|
|
|
|
if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
|
|
ret = -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
|
|
int last)
|
|
{
|
|
struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
|
|
u16 val, tcr_val;
|
|
int ret;
|
|
unsigned long wait_result;
|
|
int xfer_len = 0;
|
|
|
|
if (!(pmsg->flags & I2C_M_NOSTART)) {
|
|
ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (pmsg->len == 0) {
|
|
/*
|
|
* We still need to run through the while (..) once, so
|
|
* start at -1 and break out early from the loop
|
|
*/
|
|
xfer_len = -1;
|
|
writew(0, i2c_dev->base + REG_CDR);
|
|
} else {
|
|
writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
|
|
}
|
|
|
|
if (!(pmsg->flags & I2C_M_NOSTART)) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val &= ~CR_TX_END;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_CPU_RDY;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
|
|
reinit_completion(&i2c_dev->complete);
|
|
|
|
if (i2c_dev->mode == I2C_MODE_STANDARD)
|
|
tcr_val = TCR_STANDARD_MODE;
|
|
else
|
|
tcr_val = TCR_FAST_MODE;
|
|
|
|
tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
|
|
|
|
writew(tcr_val, i2c_dev->base + REG_TCR);
|
|
|
|
if (pmsg->flags & I2C_M_NOSTART) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_CPU_RDY;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
|
|
while (xfer_len < pmsg->len) {
|
|
wait_result = wait_for_completion_timeout(&i2c_dev->complete,
|
|
msecs_to_jiffies(500));
|
|
|
|
if (wait_result == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
ret = wmt_check_status(i2c_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
xfer_len++;
|
|
|
|
val = readw(i2c_dev->base + REG_CSR);
|
|
if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
|
|
dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (pmsg->len == 0) {
|
|
val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
break;
|
|
}
|
|
|
|
if (xfer_len == pmsg->len) {
|
|
if (last != 1)
|
|
writew(CR_ENABLE, i2c_dev->base + REG_CR);
|
|
} else {
|
|
writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
|
|
REG_CDR);
|
|
writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
|
|
int last)
|
|
{
|
|
struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
|
|
u16 val, tcr_val;
|
|
int ret;
|
|
unsigned long wait_result;
|
|
u32 xfer_len = 0;
|
|
|
|
if (!(pmsg->flags & I2C_M_NOSTART)) {
|
|
ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val &= ~CR_TX_END;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val &= ~CR_TX_NEXT_NO_ACK;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
|
|
if (!(pmsg->flags & I2C_M_NOSTART)) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_CPU_RDY;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
|
|
if (pmsg->len == 1) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_TX_NEXT_NO_ACK;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
|
|
reinit_completion(&i2c_dev->complete);
|
|
|
|
if (i2c_dev->mode == I2C_MODE_STANDARD)
|
|
tcr_val = TCR_STANDARD_MODE;
|
|
else
|
|
tcr_val = TCR_FAST_MODE;
|
|
|
|
tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
|
|
|
|
writew(tcr_val, i2c_dev->base + REG_TCR);
|
|
|
|
if (pmsg->flags & I2C_M_NOSTART) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_CPU_RDY;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
|
|
while (xfer_len < pmsg->len) {
|
|
wait_result = wait_for_completion_timeout(&i2c_dev->complete,
|
|
msecs_to_jiffies(500));
|
|
|
|
if (!wait_result)
|
|
return -ETIMEDOUT;
|
|
|
|
ret = wmt_check_status(i2c_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
|
|
xfer_len++;
|
|
|
|
if (xfer_len == pmsg->len - 1) {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY);
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
} else {
|
|
val = readw(i2c_dev->base + REG_CR);
|
|
val |= CR_CPU_RDY;
|
|
writew(val, i2c_dev->base + REG_CR);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wmt_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[],
|
|
int num)
|
|
{
|
|
struct i2c_msg *pmsg;
|
|
int i, is_last;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret >= 0 && i < num; i++) {
|
|
is_last = ((i + 1) == num);
|
|
|
|
pmsg = &msgs[i];
|
|
if (pmsg->flags & I2C_M_RD)
|
|
ret = wmt_i2c_read(adap, pmsg, is_last);
|
|
else
|
|
ret = wmt_i2c_write(adap, pmsg, is_last);
|
|
}
|
|
|
|
return (ret < 0) ? ret : i;
|
|
}
|
|
|
|
static u32 wmt_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
|
|
}
|
|
|
|
static const struct i2c_algorithm wmt_i2c_algo = {
|
|
.master_xfer = wmt_i2c_xfer,
|
|
.functionality = wmt_i2c_func,
|
|
};
|
|
|
|
static irqreturn_t wmt_i2c_isr(int irq, void *data)
|
|
{
|
|
struct wmt_i2c_dev *i2c_dev = data;
|
|
|
|
/* save the status and write-clear it */
|
|
i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
|
|
writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
|
|
|
|
complete(&i2c_dev->complete);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
|
|
{
|
|
int err;
|
|
|
|
err = clk_prepare_enable(i2c_dev->clk);
|
|
if (err) {
|
|
dev_err(i2c_dev->dev, "failed to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_set_rate(i2c_dev->clk, 20000000);
|
|
if (err) {
|
|
dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
|
|
clk_disable_unprepare(i2c_dev->clk);
|
|
return err;
|
|
}
|
|
|
|
writew(0, i2c_dev->base + REG_CR);
|
|
writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
|
|
writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
|
|
writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
|
|
writew(CR_ENABLE, i2c_dev->base + REG_CR);
|
|
readw(i2c_dev->base + REG_CSR); /* read clear */
|
|
writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
|
|
|
|
if (i2c_dev->mode == I2C_MODE_STANDARD)
|
|
writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
|
|
else
|
|
writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wmt_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct wmt_i2c_dev *i2c_dev;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
int err;
|
|
u32 clk_rate;
|
|
|
|
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
|
|
if (!i2c_dev)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(i2c_dev->base))
|
|
return PTR_ERR(i2c_dev->base);
|
|
|
|
i2c_dev->irq = irq_of_parse_and_map(np, 0);
|
|
if (!i2c_dev->irq) {
|
|
dev_err(&pdev->dev, "irq missing or invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
i2c_dev->clk = of_clk_get(np, 0);
|
|
if (IS_ERR(i2c_dev->clk)) {
|
|
dev_err(&pdev->dev, "unable to request clock\n");
|
|
return PTR_ERR(i2c_dev->clk);
|
|
}
|
|
|
|
i2c_dev->mode = I2C_MODE_STANDARD;
|
|
err = of_property_read_u32(np, "clock-frequency", &clk_rate);
|
|
if ((!err) && (clk_rate == 400000))
|
|
i2c_dev->mode = I2C_MODE_FAST;
|
|
|
|
i2c_dev->dev = &pdev->dev;
|
|
|
|
err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
|
|
"i2c", i2c_dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
|
|
return err;
|
|
}
|
|
|
|
adap = &i2c_dev->adapter;
|
|
i2c_set_adapdata(adap, i2c_dev);
|
|
strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &wmt_i2c_algo;
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
|
|
init_completion(&i2c_dev->complete);
|
|
|
|
err = wmt_i2c_reset_hardware(i2c_dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "error initializing hardware\n");
|
|
return err;
|
|
}
|
|
|
|
err = i2c_add_adapter(adap);
|
|
if (err)
|
|
return err;
|
|
|
|
platform_set_drvdata(pdev, i2c_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wmt_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
|
|
|
|
/* Disable interrupts, clock and delete adapter */
|
|
writew(0, i2c_dev->base + REG_IMR);
|
|
clk_disable_unprepare(i2c_dev->clk);
|
|
i2c_del_adapter(&i2c_dev->adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id wmt_i2c_dt_ids[] = {
|
|
{ .compatible = "wm,wm8505-i2c" },
|
|
{ /* Sentinel */ },
|
|
};
|
|
|
|
static struct platform_driver wmt_i2c_driver = {
|
|
.probe = wmt_i2c_probe,
|
|
.remove = wmt_i2c_remove,
|
|
.driver = {
|
|
.name = "wmt-i2c",
|
|
.of_match_table = wmt_i2c_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(wmt_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
|
|
MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
|