343 lines
14 KiB
ReStructuredText
343 lines
14 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
=========================
|
|
Generic Counter Interface
|
|
=========================
|
|
|
|
Introduction
|
|
============
|
|
|
|
Counter devices are prevalent within a diverse spectrum of industries.
|
|
The ubiquitous presence of these devices necessitates a common interface
|
|
and standard of interaction and exposure. This driver API attempts to
|
|
resolve the issue of duplicate code found among existing counter device
|
|
drivers by introducing a generic counter interface for consumption. The
|
|
Generic Counter interface enables drivers to support and expose a common
|
|
set of components and functionality present in counter devices.
|
|
|
|
Theory
|
|
======
|
|
|
|
Counter devices can vary greatly in design, but regardless of whether
|
|
some devices are quadrature encoder counters or tally counters, all
|
|
counter devices consist of a core set of components. This core set of
|
|
components, shared by all counter devices, is what forms the essence of
|
|
the Generic Counter interface.
|
|
|
|
There are three core components to a counter:
|
|
|
|
* Count:
|
|
Count data for a set of Signals.
|
|
|
|
* Signal:
|
|
Input data that is evaluated by the counter to determine the count
|
|
data.
|
|
|
|
* Synapse:
|
|
The association of a Signal with a respective Count.
|
|
|
|
COUNT
|
|
-----
|
|
A Count represents the count data for a set of Signals. The Generic
|
|
Counter interface provides the following available count data types:
|
|
|
|
* COUNT_POSITION:
|
|
Unsigned integer value representing position.
|
|
|
|
A Count has a count function mode which represents the update behavior
|
|
for the count data. The Generic Counter interface provides the following
|
|
available count function modes:
|
|
|
|
* Increase:
|
|
Accumulated count is incremented.
|
|
|
|
* Decrease:
|
|
Accumulated count is decremented.
|
|
|
|
* Pulse-Direction:
|
|
Rising edges on signal A updates the respective count. The input level
|
|
of signal B determines direction.
|
|
|
|
* Quadrature:
|
|
A pair of quadrature encoding signals are evaluated to determine
|
|
position and direction. The following Quadrature modes are available:
|
|
|
|
- x1 A:
|
|
If direction is forward, rising edges on quadrature pair signal A
|
|
updates the respective count; if the direction is backward, falling
|
|
edges on quadrature pair signal A updates the respective count.
|
|
Quadrature encoding determines the direction.
|
|
|
|
- x1 B:
|
|
If direction is forward, rising edges on quadrature pair signal B
|
|
updates the respective count; if the direction is backward, falling
|
|
edges on quadrature pair signal B updates the respective count.
|
|
Quadrature encoding determines the direction.
|
|
|
|
- x2 A:
|
|
Any state transition on quadrature pair signal A updates the
|
|
respective count. Quadrature encoding determines the direction.
|
|
|
|
- x2 B:
|
|
Any state transition on quadrature pair signal B updates the
|
|
respective count. Quadrature encoding determines the direction.
|
|
|
|
- x4:
|
|
Any state transition on either quadrature pair signals updates the
|
|
respective count. Quadrature encoding determines the direction.
|
|
|
|
A Count has a set of one or more associated Signals.
|
|
|
|
SIGNAL
|
|
------
|
|
A Signal represents a counter input data; this is the input data that is
|
|
evaluated by the counter to determine the count data; e.g. a quadrature
|
|
signal output line of a rotary encoder. Not all counter devices provide
|
|
user access to the Signal data.
|
|
|
|
The Generic Counter interface provides the following available signal
|
|
data types for when the Signal data is available for user access:
|
|
|
|
* SIGNAL_LEVEL:
|
|
Signal line state level. The following states are possible:
|
|
|
|
- SIGNAL_LEVEL_LOW:
|
|
Signal line is in a low state.
|
|
|
|
- SIGNAL_LEVEL_HIGH:
|
|
Signal line is in a high state.
|
|
|
|
A Signal may be associated with one or more Counts.
|
|
|
|
SYNAPSE
|
|
-------
|
|
A Synapse represents the association of a Signal with a respective
|
|
Count. Signal data affects respective Count data, and the Synapse
|
|
represents this relationship.
|
|
|
|
The Synapse action mode specifies the Signal data condition which
|
|
triggers the respective Count's count function evaluation to update the
|
|
count data. The Generic Counter interface provides the following
|
|
available action modes:
|
|
|
|
* None:
|
|
Signal does not trigger the count function. In Pulse-Direction count
|
|
function mode, this Signal is evaluated as Direction.
|
|
|
|
* Rising Edge:
|
|
Low state transitions to high state.
|
|
|
|
* Falling Edge:
|
|
High state transitions to low state.
|
|
|
|
* Both Edges:
|
|
Any state transition.
|
|
|
|
A counter is defined as a set of input signals associated with count
|
|
data that are generated by the evaluation of the state of the associated
|
|
input signals as defined by the respective count functions. Within the
|
|
context of the Generic Counter interface, a counter consists of Counts
|
|
each associated with a set of Signals, whose respective Synapse
|
|
instances represent the count function update conditions for the
|
|
associated Counts.
|
|
|
|
Paradigm
|
|
========
|
|
|
|
The most basic counter device may be expressed as a single Count
|
|
associated with a single Signal via a single Synapse. Take for example
|
|
a counter device which simply accumulates a count of rising edges on a
|
|
source input line::
|
|
|
|
Count Synapse Signal
|
|
----- ------- ------
|
|
+---------------------+
|
|
| Data: Count | Rising Edge ________
|
|
| Function: Increase | <------------- / Source \
|
|
| | ____________
|
|
+---------------------+
|
|
|
|
In this example, the Signal is a source input line with a pulsing
|
|
voltage, while the Count is a persistent count value which is repeatedly
|
|
incremented. The Signal is associated with the respective Count via a
|
|
Synapse. The increase function is triggered by the Signal data condition
|
|
specified by the Synapse -- in this case a rising edge condition on the
|
|
voltage input line. In summary, the counter device existence and
|
|
behavior is aptly represented by respective Count, Signal, and Synapse
|
|
components: a rising edge condition triggers an increase function on an
|
|
accumulating count datum.
|
|
|
|
A counter device is not limited to a single Signal; in fact, in theory
|
|
many Signals may be associated with even a single Count. For example, a
|
|
quadrature encoder counter device can keep track of position based on
|
|
the states of two input lines::
|
|
|
|
Count Synapse Signal
|
|
----- ------- ------
|
|
+-------------------------+
|
|
| Data: Position | Both Edges ___
|
|
| Function: Quadrature x4 | <------------ / A \
|
|
| | _______
|
|
| |
|
|
| | Both Edges ___
|
|
| | <------------ / B \
|
|
| | _______
|
|
+-------------------------+
|
|
|
|
In this example, two Signals (quadrature encoder lines A and B) are
|
|
associated with a single Count: a rising or falling edge on either A or
|
|
B triggers the "Quadrature x4" function which determines the direction
|
|
of movement and updates the respective position data. The "Quadrature
|
|
x4" function is likely implemented in the hardware of the quadrature
|
|
encoder counter device; the Count, Signals, and Synapses simply
|
|
represent this hardware behavior and functionality.
|
|
|
|
Signals associated with the same Count can have differing Synapse action
|
|
mode conditions. For example, a quadrature encoder counter device
|
|
operating in a non-quadrature Pulse-Direction mode could have one input
|
|
line dedicated for movement and a second input line dedicated for
|
|
direction::
|
|
|
|
Count Synapse Signal
|
|
----- ------- ------
|
|
+---------------------------+
|
|
| Data: Position | Rising Edge ___
|
|
| Function: Pulse-Direction | <------------- / A \ (Movement)
|
|
| | _______
|
|
| |
|
|
| | None ___
|
|
| | <------------- / B \ (Direction)
|
|
| | _______
|
|
+---------------------------+
|
|
|
|
Only Signal A triggers the "Pulse-Direction" update function, but the
|
|
instantaneous state of Signal B is still required in order to know the
|
|
direction so that the position data may be properly updated. Ultimately,
|
|
both Signals are associated with the same Count via two respective
|
|
Synapses, but only one Synapse has an active action mode condition which
|
|
triggers the respective count function while the other is left with a
|
|
"None" condition action mode to indicate its respective Signal's
|
|
availability for state evaluation despite its non-triggering mode.
|
|
|
|
Keep in mind that the Signal, Synapse, and Count are abstract
|
|
representations which do not need to be closely married to their
|
|
respective physical sources. This allows the user of a counter to
|
|
divorce themselves from the nuances of physical components (such as
|
|
whether an input line is differential or single-ended) and instead focus
|
|
on the core idea of what the data and process represent (e.g. position
|
|
as interpreted from quadrature encoding data).
|
|
|
|
Userspace Interface
|
|
===================
|
|
|
|
Several sysfs attributes are generated by the Generic Counter interface,
|
|
and reside under the /sys/bus/counter/devices/counterX directory, where
|
|
counterX refers to the respective counter device. Please see
|
|
Documentation/ABI/testing/sys-bus-counter-generic-sysfs for detailed
|
|
information on each Generic Counter interface sysfs attribute.
|
|
|
|
Through these sysfs attributes, programs and scripts may interact with
|
|
the Generic Counter paradigm Counts, Signals, and Synapses of respective
|
|
counter devices.
|
|
|
|
Driver API
|
|
==========
|
|
|
|
Driver authors may utilize the Generic Counter interface in their code
|
|
by including the include/linux/counter.h header file. This header file
|
|
provides several core data structures, function prototypes, and macros
|
|
for defining a counter device.
|
|
|
|
.. kernel-doc:: include/linux/counter.h
|
|
:internal:
|
|
|
|
.. kernel-doc:: drivers/counter/counter.c
|
|
:export:
|
|
|
|
Implementation
|
|
==============
|
|
|
|
To support a counter device, a driver must first allocate the available
|
|
Counter Signals via counter_signal structures. These Signals should
|
|
be stored as an array and set to the signals array member of an
|
|
allocated counter_device structure before the Counter is registered to
|
|
the system.
|
|
|
|
Counter Counts may be allocated via counter_count structures, and
|
|
respective Counter Signal associations (Synapses) made via
|
|
counter_synapse structures. Associated counter_synapse structures are
|
|
stored as an array and set to the the synapses array member of the
|
|
respective counter_count structure. These counter_count structures are
|
|
set to the counts array member of an allocated counter_device structure
|
|
before the Counter is registered to the system.
|
|
|
|
Driver callbacks should be provided to the counter_device structure via
|
|
a constant counter_ops structure in order to communicate with the
|
|
device: to read and write various Signals and Counts, and to set and get
|
|
the "action mode" and "function mode" for various Synapses and Counts
|
|
respectively.
|
|
|
|
A defined counter_device structure may be registered to the system by
|
|
passing it to the counter_register function, and unregistered by passing
|
|
it to the counter_unregister function. Similarly, the
|
|
devm_counter_register and devm_counter_unregister functions may be used
|
|
if device memory-managed registration is desired.
|
|
|
|
Extension sysfs attributes can be created for auxiliary functionality
|
|
and data by passing in defined counter_device_ext, counter_count_ext,
|
|
and counter_signal_ext structures. In these cases, the
|
|
counter_device_ext structure is used for global configuration of the
|
|
respective Counter device, while the counter_count_ext and
|
|
counter_signal_ext structures allow for auxiliary exposure and
|
|
configuration of a specific Count or Signal respectively.
|
|
|
|
Architecture
|
|
============
|
|
|
|
When the Generic Counter interface counter module is loaded, the
|
|
counter_init function is called which registers a bus_type named
|
|
"counter" to the system. Subsequently, when the module is unloaded, the
|
|
counter_exit function is called which unregisters the bus_type named
|
|
"counter" from the system.
|
|
|
|
Counter devices are registered to the system via the counter_register
|
|
function, and later removed via the counter_unregister function. The
|
|
counter_register function establishes a unique ID for the Counter
|
|
device and creates a respective sysfs directory, where X is the
|
|
mentioned unique ID:
|
|
|
|
/sys/bus/counter/devices/counterX
|
|
|
|
Sysfs attributes are created within the counterX directory to expose
|
|
functionality, configurations, and data relating to the Counts, Signals,
|
|
and Synapses of the Counter device, as well as options and information
|
|
for the Counter device itself.
|
|
|
|
Each Signal has a directory created to house its relevant sysfs
|
|
attributes, where Y is the unique ID of the respective Signal:
|
|
|
|
/sys/bus/counter/devices/counterX/signalY
|
|
|
|
Similarly, each Count has a directory created to house its relevant
|
|
sysfs attributes, where Y is the unique ID of the respective Count:
|
|
|
|
/sys/bus/counter/devices/counterX/countY
|
|
|
|
For a more detailed breakdown of the available Generic Counter interface
|
|
sysfs attributes, please refer to the
|
|
Documentation/ABI/testing/sys-bus-counter file.
|
|
|
|
The Signals and Counts associated with the Counter device are registered
|
|
to the system as well by the counter_register function. The
|
|
signal_read/signal_write driver callbacks are associated with their
|
|
respective Signal attributes, while the count_read/count_write and
|
|
function_get/function_set driver callbacks are associated with their
|
|
respective Count attributes; similarly, the same is true for the
|
|
action_get/action_set driver callbacks and their respective Synapse
|
|
attributes. If a driver callback is left undefined, then the respective
|
|
read/write permission is left disabled for the relevant attributes.
|
|
|
|
Similarly, extension sysfs attributes are created for the defined
|
|
counter_device_ext, counter_count_ext, and counter_signal_ext
|
|
structures that are passed in.
|