linux/drivers/net/phy/smsc.c

322 lines
7.9 KiB
C

/*
* drivers/net/phy/smsc.c
*
* Driver for SMSC PHYs
*
* Author: Herbert Valerio Riedel
*
* Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/smscphy.h>
struct smsc_phy_priv {
bool energy_enable;
};
static int smsc_phy_config_intr(struct phy_device *phydev)
{
int rc = phy_write (phydev, MII_LAN83C185_IM,
((PHY_INTERRUPT_ENABLED == phydev->interrupts)
? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
: 0));
return rc < 0 ? rc : 0;
}
static int smsc_phy_ack_interrupt(struct phy_device *phydev)
{
int rc = phy_read (phydev, MII_LAN83C185_ISF);
return rc < 0 ? rc : 0;
}
static int smsc_phy_config_init(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
if (priv->energy_enable) {
/* Enable energy detect mode for this SMSC Transceivers */
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
}
return smsc_phy_ack_interrupt(phydev);
}
static int smsc_phy_reset(struct phy_device *phydev)
{
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
if (rc < 0)
return rc;
/* If the SMSC PHY is in power down mode, then set it
* in all capable mode before using it.
*/
if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
/* set "all capable" mode */
rc |= MII_LAN83C185_MODE_ALL;
phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
}
/* reset the phy */
return genphy_soft_reset(phydev);
}
static int lan911x_config_init(struct phy_device *phydev)
{
return smsc_phy_ack_interrupt(phydev);
}
/*
* The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
* plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
* unstable detection of plugging in Ethernet cable.
* This workaround disables Energy Detect Power-Down mode and waiting for
* response on link pulses to detect presence of plugged Ethernet cable.
* The Energy Detect Power-Down mode is enabled again in the end of procedure to
* save approximately 220 mW of power if cable is unplugged.
*/
static int lan87xx_read_status(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
int err = genphy_read_status(phydev);
if (!phydev->link && priv->energy_enable) {
int i;
/* Disable EDPD to wake up PHY */
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc & ~MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
/* Wait max 640 ms to detect energy */
for (i = 0; i < 64; i++) {
/* Sleep to allow link test pulses to be sent */
msleep(10);
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
if (rc & MII_LAN83C185_ENERGYON)
break;
}
/* Re-enable EDPD */
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
}
return err;
}
static int smsc_phy_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
struct smsc_phy_priv *priv;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->energy_enable = true;
if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
priv->energy_enable = false;
phydev->priv = priv;
return 0;
}
static struct phy_driver smsc_phy_driver[] = {
{
.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN83C185",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8187",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8700",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN911x Internal PHY",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = lan911x_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8710/LAN8720",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c110,
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8740",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = smsc_phy_probe,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
module_phy_driver(smsc_phy_driver);
MODULE_DESCRIPTION("SMSC PHY driver");
MODULE_AUTHOR("Herbert Valerio Riedel");
MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused smsc_tbl[] = {
{ 0x0007c0a0, 0xfffffff0 },
{ 0x0007c0b0, 0xfffffff0 },
{ 0x0007c0c0, 0xfffffff0 },
{ 0x0007c0d0, 0xfffffff0 },
{ 0x0007c0f0, 0xfffffff0 },
{ 0x0007c110, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, smsc_tbl);