8f33450a4c
Although the ivtv driver reports radio support through the V4L2 API, it fails to actually enable it. This patch fixes that. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
1475 lines
45 KiB
C
1475 lines
45 KiB
C
/*
|
|
ivtv driver initialization and card probing
|
|
Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
|
|
Copyright (C) 2004 Chris Kennedy <c@groovy.org>
|
|
Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/* Main Driver file for the ivtv project:
|
|
* Driver for the Conexant CX23415/CX23416 chip.
|
|
* Author: Kevin Thayer (nufan_wfk at yahoo.com)
|
|
* License: GPL
|
|
* http://www.ivtvdriver.org
|
|
*
|
|
* -----
|
|
* MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
|
|
* and Takeru KOMORIYA<komoriya@paken.org>
|
|
*
|
|
* AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
|
|
* using information provided by Jiun-Kuei Jung @ AVerMedia.
|
|
*
|
|
* Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
|
|
* using information from T.Adachi,Takeru KOMORIYA and others :-)
|
|
*
|
|
* Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
|
|
* version by T.Adachi. Special thanks Mr.Suzuki
|
|
*/
|
|
|
|
#include "ivtv-driver.h"
|
|
#include "ivtv-version.h"
|
|
#include "ivtv-fileops.h"
|
|
#include "ivtv-i2c.h"
|
|
#include "ivtv-firmware.h"
|
|
#include "ivtv-queue.h"
|
|
#include "ivtv-udma.h"
|
|
#include "ivtv-irq.h"
|
|
#include "ivtv-mailbox.h"
|
|
#include "ivtv-streams.h"
|
|
#include "ivtv-ioctl.h"
|
|
#include "ivtv-cards.h"
|
|
#include "ivtv-vbi.h"
|
|
#include "ivtv-routing.h"
|
|
#include "ivtv-controls.h"
|
|
#include "ivtv-gpio.h"
|
|
|
|
#include <media/tveeprom.h>
|
|
#include <media/saa7115.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include "tuner-xc2028.h"
|
|
|
|
/* If you have already X v4l cards, then set this to X. This way
|
|
the device numbers stay matched. Example: you have a WinTV card
|
|
without radio and a PVR-350 with. Normally this would give a
|
|
video1 device together with a radio0 device for the PVR. By
|
|
setting this to 1 you ensure that radio0 is now also radio1. */
|
|
int ivtv_first_minor;
|
|
|
|
/* add your revision and whatnot here */
|
|
static struct pci_device_id ivtv_pci_tbl[] __devinitdata = {
|
|
{PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV16,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl);
|
|
|
|
/* ivtv instance counter */
|
|
static atomic_t ivtv_instance = ATOMIC_INIT(0);
|
|
|
|
/* Parameter declarations */
|
|
static int cardtype[IVTV_MAX_CARDS];
|
|
static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1 };
|
|
static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1 };
|
|
static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1 };
|
|
|
|
static unsigned int cardtype_c = 1;
|
|
static unsigned int tuner_c = 1;
|
|
static unsigned int radio_c = 1;
|
|
static unsigned int i2c_clock_period_c = 1;
|
|
static char pal[] = "---";
|
|
static char secam[] = "--";
|
|
static char ntsc[] = "-";
|
|
|
|
/* Buffers */
|
|
|
|
/* DMA Buffers, Default size in MB allocated */
|
|
#define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
|
|
#define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
|
|
#define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
|
|
/* Exception: size in kB for this stream (MB is overkill) */
|
|
#define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
|
|
#define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
|
|
#define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
|
|
/* Exception: size in kB for this stream (MB is way overkill) */
|
|
#define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
|
|
|
|
static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS;
|
|
static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS;
|
|
static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS;
|
|
static int enc_pcm_buffers = IVTV_DEFAULT_ENC_PCM_BUFFERS;
|
|
static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS;
|
|
static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS;
|
|
static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS;
|
|
|
|
static int ivtv_yuv_mode;
|
|
static int ivtv_yuv_threshold = -1;
|
|
static int ivtv_pci_latency = 1;
|
|
|
|
int ivtv_debug;
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
int ivtv_fw_debug;
|
|
#endif
|
|
|
|
static int tunertype = -1;
|
|
static int newi2c = -1;
|
|
|
|
module_param_array(tuner, int, &tuner_c, 0644);
|
|
module_param_array(radio, bool, &radio_c, 0644);
|
|
module_param_array(cardtype, int, &cardtype_c, 0644);
|
|
module_param_string(pal, pal, sizeof(pal), 0644);
|
|
module_param_string(secam, secam, sizeof(secam), 0644);
|
|
module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
|
|
module_param_named(debug,ivtv_debug, int, 0644);
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
module_param_named(fw_debug, ivtv_fw_debug, int, 0644);
|
|
#endif
|
|
module_param(ivtv_pci_latency, int, 0644);
|
|
module_param(ivtv_yuv_mode, int, 0644);
|
|
module_param(ivtv_yuv_threshold, int, 0644);
|
|
module_param(ivtv_first_minor, int, 0644);
|
|
|
|
module_param(enc_mpg_buffers, int, 0644);
|
|
module_param(enc_yuv_buffers, int, 0644);
|
|
module_param(enc_vbi_buffers, int, 0644);
|
|
module_param(enc_pcm_buffers, int, 0644);
|
|
module_param(dec_mpg_buffers, int, 0644);
|
|
module_param(dec_yuv_buffers, int, 0644);
|
|
module_param(dec_vbi_buffers, int, 0644);
|
|
|
|
module_param(tunertype, int, 0644);
|
|
module_param(newi2c, int, 0644);
|
|
module_param_array(i2c_clock_period, int, &i2c_clock_period_c, 0644);
|
|
|
|
MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
|
|
"\t\t\tsee tuner.h for values");
|
|
MODULE_PARM_DESC(radio,
|
|
"Enable or disable the radio. Use only if autodetection\n"
|
|
"\t\t\tfails. 0 = disable, 1 = enable");
|
|
MODULE_PARM_DESC(cardtype,
|
|
"Only use this option if your card is not detected properly.\n"
|
|
"\t\tSpecify card type:\n"
|
|
"\t\t\t 1 = WinTV PVR 250\n"
|
|
"\t\t\t 2 = WinTV PVR 350\n"
|
|
"\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
|
|
"\t\t\t 4 = AVerMedia M179\n"
|
|
"\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
|
|
"\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
|
|
"\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
|
|
"\t\t\t 8 = Adaptec AVC-2410\n"
|
|
"\t\t\t 9 = Adaptec AVC-2010\n"
|
|
"\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
|
|
"\t\t\t11 = AOpen VA2000MAX-STN6\n"
|
|
"\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
|
|
"\t\t\t13 = I/O Data GV-MVP/RX\n"
|
|
"\t\t\t14 = I/O Data GV-MVP/RX2E\n"
|
|
"\t\t\t15 = GOTVIEW PCI DVD\n"
|
|
"\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
|
|
"\t\t\t17 = Yuan MPC622\n"
|
|
"\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
|
|
"\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
|
|
"\t\t\t20 = Club3D ZAP-TV1x01\n"
|
|
"\t\t\t21 = AverTV MCE 116 Plus\n"
|
|
"\t\t\t22 = ASUS Falcon2\n"
|
|
"\t\t\t23 = AverMedia PVR-150 Plus\n"
|
|
"\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
|
|
"\t\t\t25 = AverMedia M104 (not yet working)\n"
|
|
"\t\t\t26 = Buffalo PC-MV5L/PCI\n"
|
|
"\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
|
|
"\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
|
|
"\t\t\t 0 = Autodetect (default)\n"
|
|
"\t\t\t-1 = Ignore this card\n\t\t");
|
|
MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
|
|
MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC");
|
|
MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)");
|
|
MODULE_PARM_DESC(tunertype,
|
|
"Specify tuner type:\n"
|
|
"\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
|
|
"\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
|
|
"\t\t\t-1 = Autodetect (default)\n");
|
|
MODULE_PARM_DESC(debug,
|
|
"Debug level (bitmask). Default: 0\n"
|
|
"\t\t\t 1/0x0001: warning\n"
|
|
"\t\t\t 2/0x0002: info\n"
|
|
"\t\t\t 4/0x0004: mailbox\n"
|
|
"\t\t\t 8/0x0008: ioctl\n"
|
|
"\t\t\t 16/0x0010: file\n"
|
|
"\t\t\t 32/0x0020: dma\n"
|
|
"\t\t\t 64/0x0040: irq\n"
|
|
"\t\t\t 128/0x0080: decoder\n"
|
|
"\t\t\t 256/0x0100: yuv\n"
|
|
"\t\t\t 512/0x0200: i2c\n"
|
|
"\t\t\t1024/0x0400: high volume\n");
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
MODULE_PARM_DESC(fw_debug,
|
|
"Enable code for debugging firmware problems. Default: 0\n");
|
|
#endif
|
|
MODULE_PARM_DESC(ivtv_pci_latency,
|
|
"Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
|
|
"\t\t\tDefault: Yes");
|
|
MODULE_PARM_DESC(ivtv_yuv_mode,
|
|
"Specify the yuv playback mode:\n"
|
|
"\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
|
|
"\t\t\tDefault: 0 (interlaced)");
|
|
MODULE_PARM_DESC(ivtv_yuv_threshold,
|
|
"If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
|
|
"\t\t\tDefault: 480");
|
|
MODULE_PARM_DESC(enc_mpg_buffers,
|
|
"Encoder MPG Buffers (in MB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS));
|
|
MODULE_PARM_DESC(enc_yuv_buffers,
|
|
"Encoder YUV Buffers (in MB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS));
|
|
MODULE_PARM_DESC(enc_vbi_buffers,
|
|
"Encoder VBI Buffers (in MB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS));
|
|
MODULE_PARM_DESC(enc_pcm_buffers,
|
|
"Encoder PCM buffers (in kB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS));
|
|
MODULE_PARM_DESC(dec_mpg_buffers,
|
|
"Decoder MPG buffers (in MB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS));
|
|
MODULE_PARM_DESC(dec_yuv_buffers,
|
|
"Decoder YUV buffers (in MB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS));
|
|
MODULE_PARM_DESC(dec_vbi_buffers,
|
|
"Decoder VBI buffers (in kB)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS));
|
|
MODULE_PARM_DESC(newi2c,
|
|
"Use new I2C implementation\n"
|
|
"\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
|
|
"\t\t\tDefault is autodetect");
|
|
MODULE_PARM_DESC(i2c_clock_period,
|
|
"Period of SCL for the I2C bus controlled by the CX23415/6\n"
|
|
"\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
|
|
"\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD));
|
|
|
|
MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card");
|
|
|
|
MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
|
|
MODULE_DESCRIPTION("CX23415/CX23416 driver");
|
|
MODULE_SUPPORTED_DEVICE
|
|
("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
|
|
"\t\t\tYuan MPG series and similar)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(IVTV_VERSION);
|
|
|
|
void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask)
|
|
{
|
|
itv->irqmask &= ~mask;
|
|
write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
|
|
}
|
|
|
|
void ivtv_set_irq_mask(struct ivtv *itv, u32 mask)
|
|
{
|
|
itv->irqmask |= mask;
|
|
write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
|
|
}
|
|
|
|
int ivtv_set_output_mode(struct ivtv *itv, int mode)
|
|
{
|
|
int old_mode;
|
|
|
|
spin_lock(&itv->lock);
|
|
old_mode = itv->output_mode;
|
|
if (old_mode == 0)
|
|
itv->output_mode = old_mode = mode;
|
|
spin_unlock(&itv->lock);
|
|
return old_mode;
|
|
}
|
|
|
|
struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv)
|
|
{
|
|
switch (itv->output_mode) {
|
|
case OUT_MPG:
|
|
return &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
|
|
case OUT_YUV:
|
|
return &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
int ivtv_waitq(wait_queue_head_t *waitq)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
|
|
prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE);
|
|
schedule();
|
|
finish_wait(waitq, &wait);
|
|
return signal_pending(current) ? -EINTR : 0;
|
|
}
|
|
|
|
/* Generic utility functions */
|
|
int ivtv_msleep_timeout(unsigned int msecs, int intr)
|
|
{
|
|
int timeout = msecs_to_jiffies(msecs);
|
|
|
|
do {
|
|
set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
|
|
timeout = schedule_timeout(timeout);
|
|
if (intr) {
|
|
int ret = signal_pending(current);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
} while (timeout);
|
|
return 0;
|
|
}
|
|
|
|
/* Release ioremapped memory */
|
|
static void ivtv_iounmap(struct ivtv *itv)
|
|
{
|
|
if (itv == NULL)
|
|
return;
|
|
|
|
/* Release registers memory */
|
|
if (itv->reg_mem != NULL) {
|
|
IVTV_DEBUG_INFO("releasing reg_mem\n");
|
|
iounmap(itv->reg_mem);
|
|
itv->reg_mem = NULL;
|
|
}
|
|
/* Release io memory */
|
|
if (itv->has_cx23415 && itv->dec_mem != NULL) {
|
|
IVTV_DEBUG_INFO("releasing dec_mem\n");
|
|
iounmap(itv->dec_mem);
|
|
}
|
|
itv->dec_mem = NULL;
|
|
|
|
/* Release io memory */
|
|
if (itv->enc_mem != NULL) {
|
|
IVTV_DEBUG_INFO("releasing enc_mem\n");
|
|
iounmap(itv->enc_mem);
|
|
itv->enc_mem = NULL;
|
|
}
|
|
}
|
|
|
|
/* Hauppauge card? get values from tveeprom */
|
|
void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv)
|
|
{
|
|
u8 eedata[256];
|
|
|
|
itv->i2c_client.addr = 0xA0 >> 1;
|
|
tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata));
|
|
tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata);
|
|
}
|
|
|
|
static void ivtv_process_eeprom(struct ivtv *itv)
|
|
{
|
|
struct tveeprom tv;
|
|
int pci_slot = PCI_SLOT(itv->pdev->devfn);
|
|
|
|
ivtv_read_eeprom(itv, &tv);
|
|
|
|
/* Many thanks to Steven Toth from Hauppauge for providing the
|
|
model numbers */
|
|
switch (tv.model) {
|
|
/* In a few cases the PCI subsystem IDs do not correctly
|
|
identify the card. A better method is to check the
|
|
model number from the eeprom instead. */
|
|
case 30012 ... 30039: /* Low profile PVR250 */
|
|
case 32000 ... 32999:
|
|
case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
|
|
case 48400 ... 48599:
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_250);
|
|
break;
|
|
case 48100 ... 48399:
|
|
case 48600 ... 48999:
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_350);
|
|
break;
|
|
case 23000 ... 23999: /* PVR500 */
|
|
case 25000 ... 25999: /* Low profile PVR150 */
|
|
case 26000 ... 26999: /* Regular PVR150 */
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
|
|
break;
|
|
case 0:
|
|
IVTV_ERR("Invalid EEPROM\n");
|
|
return;
|
|
default:
|
|
IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model);
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
|
|
break;
|
|
}
|
|
|
|
switch (tv.model) {
|
|
/* Old style PVR350 (with an saa7114) uses this input for
|
|
the tuner. */
|
|
case 48254:
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_350_V1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
itv->v4l2_cap = itv->card->v4l2_capabilities;
|
|
itv->card_name = itv->card->name;
|
|
itv->card_i2c = itv->card->i2c;
|
|
|
|
/* If this is a PVR500 then it should be possible to detect whether it is the
|
|
first or second unit by looking at the subsystem device ID: is bit 4 is
|
|
set, then it is the second unit (according to info from Hauppauge).
|
|
|
|
However, while this works for most cards, I have seen a few PVR500 cards
|
|
where both units have the same subsystem ID.
|
|
|
|
So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
|
|
PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
|
|
it is the second unit. It is possible that it is a different slot when ivtv is
|
|
used in Xen, in that case I ignore this card here. The worst that can happen
|
|
is that the card presents itself with a non-working radio device.
|
|
|
|
This detection is needed since the eeprom reports incorrectly that a radio is
|
|
present on the second unit. */
|
|
if (tv.model / 1000 == 23) {
|
|
static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = {
|
|
.radio = { 0x60, I2C_CLIENT_END },
|
|
.demod = { 0x43, I2C_CLIENT_END },
|
|
.tv = { 0x61, I2C_CLIENT_END },
|
|
};
|
|
|
|
itv->card_name = "WinTV PVR 500";
|
|
itv->card_i2c = &ivtv_i2c_radio;
|
|
if (pci_slot == 8 || pci_slot == 9) {
|
|
int is_first = (pci_slot & 1) == 0;
|
|
|
|
itv->card_name = is_first ? "WinTV PVR 500 (unit #1)" :
|
|
"WinTV PVR 500 (unit #2)";
|
|
if (!is_first) {
|
|
IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
|
|
tv.has_radio = 0;
|
|
}
|
|
}
|
|
}
|
|
IVTV_INFO("Autodetected %s\n", itv->card_name);
|
|
|
|
switch (tv.tuner_hauppauge_model) {
|
|
case 85:
|
|
case 99:
|
|
case 112:
|
|
itv->pvr150_workaround = 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (tv.tuner_type == TUNER_ABSENT)
|
|
IVTV_ERR("tveeprom cannot autodetect tuner!\n");
|
|
|
|
if (itv->options.tuner == -1)
|
|
itv->options.tuner = tv.tuner_type;
|
|
if (itv->options.radio == -1)
|
|
itv->options.radio = (tv.has_radio != 0);
|
|
/* only enable newi2c if an IR blaster is present */
|
|
if (itv->options.newi2c == -1 && tv.has_ir) {
|
|
itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0;
|
|
if (itv->options.newi2c) {
|
|
IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
|
|
exit_ivtv_i2c(itv);
|
|
init_ivtv_i2c(itv);
|
|
}
|
|
}
|
|
|
|
if (itv->std != 0)
|
|
/* user specified tuner standard */
|
|
return;
|
|
|
|
/* autodetect tuner standard */
|
|
if (tv.tuner_formats & V4L2_STD_PAL) {
|
|
IVTV_DEBUG_INFO("PAL tuner detected\n");
|
|
itv->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
|
|
} else if (tv.tuner_formats & V4L2_STD_NTSC) {
|
|
IVTV_DEBUG_INFO("NTSC tuner detected\n");
|
|
itv->std |= V4L2_STD_NTSC_M;
|
|
} else if (tv.tuner_formats & V4L2_STD_SECAM) {
|
|
IVTV_DEBUG_INFO("SECAM tuner detected\n");
|
|
itv->std |= V4L2_STD_SECAM_L;
|
|
} else {
|
|
IVTV_INFO("No tuner detected, default to NTSC-M\n");
|
|
itv->std |= V4L2_STD_NTSC_M;
|
|
}
|
|
}
|
|
|
|
static v4l2_std_id ivtv_parse_std(struct ivtv *itv)
|
|
{
|
|
switch (pal[0]) {
|
|
case '6':
|
|
tunertype = 0;
|
|
return V4L2_STD_PAL_60;
|
|
case 'b':
|
|
case 'B':
|
|
case 'g':
|
|
case 'G':
|
|
case 'h':
|
|
case 'H':
|
|
tunertype = 0;
|
|
return V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
|
|
case 'n':
|
|
case 'N':
|
|
tunertype = 1;
|
|
if (pal[1] == 'c' || pal[1] == 'C')
|
|
return V4L2_STD_PAL_Nc;
|
|
return V4L2_STD_PAL_N;
|
|
case 'i':
|
|
case 'I':
|
|
tunertype = 0;
|
|
return V4L2_STD_PAL_I;
|
|
case 'd':
|
|
case 'D':
|
|
case 'k':
|
|
case 'K':
|
|
tunertype = 0;
|
|
return V4L2_STD_PAL_DK;
|
|
case 'M':
|
|
case 'm':
|
|
tunertype = 1;
|
|
return V4L2_STD_PAL_M;
|
|
case '-':
|
|
break;
|
|
default:
|
|
IVTV_WARN("pal= argument not recognised\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (secam[0]) {
|
|
case 'b':
|
|
case 'B':
|
|
case 'g':
|
|
case 'G':
|
|
case 'h':
|
|
case 'H':
|
|
tunertype = 0;
|
|
return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
|
|
case 'd':
|
|
case 'D':
|
|
case 'k':
|
|
case 'K':
|
|
tunertype = 0;
|
|
return V4L2_STD_SECAM_DK;
|
|
case 'l':
|
|
case 'L':
|
|
tunertype = 0;
|
|
if (secam[1] == 'C' || secam[1] == 'c')
|
|
return V4L2_STD_SECAM_LC;
|
|
return V4L2_STD_SECAM_L;
|
|
case '-':
|
|
break;
|
|
default:
|
|
IVTV_WARN("secam= argument not recognised\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (ntsc[0]) {
|
|
case 'm':
|
|
case 'M':
|
|
tunertype = 1;
|
|
return V4L2_STD_NTSC_M;
|
|
case 'j':
|
|
case 'J':
|
|
tunertype = 1;
|
|
return V4L2_STD_NTSC_M_JP;
|
|
case 'k':
|
|
case 'K':
|
|
tunertype = 1;
|
|
return V4L2_STD_NTSC_M_KR;
|
|
case '-':
|
|
break;
|
|
default:
|
|
IVTV_WARN("ntsc= argument not recognised\n");
|
|
return 0;
|
|
}
|
|
|
|
/* no match found */
|
|
return 0;
|
|
}
|
|
|
|
static void ivtv_process_options(struct ivtv *itv)
|
|
{
|
|
const char *chipname;
|
|
int i, j;
|
|
|
|
itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024;
|
|
itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024;
|
|
itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024;
|
|
itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
|
|
itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024;
|
|
itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024;
|
|
itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers;
|
|
itv->options.cardtype = cardtype[itv->instance];
|
|
itv->options.tuner = tuner[itv->instance];
|
|
itv->options.radio = radio[itv->instance];
|
|
|
|
itv->options.i2c_clock_period = i2c_clock_period[itv->instance];
|
|
if (itv->options.i2c_clock_period == -1)
|
|
itv->options.i2c_clock_period = IVTV_DEFAULT_I2C_CLOCK_PERIOD;
|
|
else if (itv->options.i2c_clock_period < 10)
|
|
itv->options.i2c_clock_period = 10;
|
|
else if (itv->options.i2c_clock_period > 4500)
|
|
itv->options.i2c_clock_period = 4500;
|
|
|
|
itv->options.newi2c = newi2c;
|
|
if (tunertype < -1 || tunertype > 1) {
|
|
IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
|
|
tunertype = -1;
|
|
}
|
|
itv->std = ivtv_parse_std(itv);
|
|
if (itv->std == 0 && tunertype >= 0)
|
|
itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN);
|
|
itv->has_cx23415 = (itv->pdev->device == PCI_DEVICE_ID_IVTV15);
|
|
chipname = itv->has_cx23415 ? "cx23415" : "cx23416";
|
|
if (itv->options.cardtype == -1) {
|
|
IVTV_INFO("Ignore card (detected %s based chip)\n", chipname);
|
|
return;
|
|
}
|
|
if ((itv->card = ivtv_get_card(itv->options.cardtype - 1))) {
|
|
IVTV_INFO("User specified %s card (detected %s based chip)\n",
|
|
itv->card->name, chipname);
|
|
} else if (itv->options.cardtype != 0) {
|
|
IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
|
|
}
|
|
if (itv->card == NULL) {
|
|
if (itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE ||
|
|
itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT1 ||
|
|
itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT2) {
|
|
itv->card = ivtv_get_card(itv->has_cx23415 ? IVTV_CARD_PVR_350 : IVTV_CARD_PVR_150);
|
|
IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
|
|
chipname);
|
|
}
|
|
}
|
|
if (itv->card == NULL) {
|
|
for (i = 0; (itv->card = ivtv_get_card(i)); i++) {
|
|
if (itv->card->pci_list == NULL)
|
|
continue;
|
|
for (j = 0; itv->card->pci_list[j].device; j++) {
|
|
if (itv->pdev->device !=
|
|
itv->card->pci_list[j].device)
|
|
continue;
|
|
if (itv->pdev->subsystem_vendor !=
|
|
itv->card->pci_list[j].subsystem_vendor)
|
|
continue;
|
|
if (itv->pdev->subsystem_device !=
|
|
itv->card->pci_list[j].subsystem_device)
|
|
continue;
|
|
IVTV_INFO("Autodetected %s card (%s based)\n",
|
|
itv->card->name, chipname);
|
|
goto done;
|
|
}
|
|
}
|
|
}
|
|
done:
|
|
|
|
if (itv->card == NULL) {
|
|
itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
|
|
IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
|
|
itv->pdev->vendor, itv->pdev->device);
|
|
IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
|
|
itv->pdev->subsystem_vendor, itv->pdev->subsystem_device);
|
|
IVTV_ERR(" %s based\n", chipname);
|
|
IVTV_ERR("Defaulting to %s card\n", itv->card->name);
|
|
IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
|
|
IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
|
|
IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
|
|
}
|
|
itv->v4l2_cap = itv->card->v4l2_capabilities;
|
|
itv->card_name = itv->card->name;
|
|
itv->card_i2c = itv->card->i2c;
|
|
}
|
|
|
|
/* Precondition: the ivtv structure has been memset to 0. Only
|
|
the dev and num fields have been filled in.
|
|
No assumptions on the card type may be made here (see ivtv_init_struct2
|
|
for that).
|
|
*/
|
|
static int __devinit ivtv_init_struct1(struct ivtv *itv)
|
|
{
|
|
struct sched_param param = { .sched_priority = 99 };
|
|
|
|
itv->base_addr = pci_resource_start(itv->pdev, 0);
|
|
itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */
|
|
itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */
|
|
|
|
mutex_init(&itv->serialize_lock);
|
|
mutex_init(&itv->i2c_bus_lock);
|
|
mutex_init(&itv->udma.lock);
|
|
|
|
spin_lock_init(&itv->lock);
|
|
spin_lock_init(&itv->dma_reg_lock);
|
|
|
|
init_kthread_worker(&itv->irq_worker);
|
|
itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker,
|
|
itv->v4l2_dev.name);
|
|
if (IS_ERR(itv->irq_worker_task)) {
|
|
IVTV_ERR("Could not create ivtv task\n");
|
|
return -1;
|
|
}
|
|
/* must use the FIFO scheduler as it is realtime sensitive */
|
|
sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, ¶m);
|
|
|
|
init_kthread_work(&itv->irq_work, ivtv_irq_work_handler);
|
|
|
|
/* start counting open_id at 1 */
|
|
itv->open_id = 1;
|
|
|
|
/* Initial settings */
|
|
itv->cxhdl.port = CX2341X_PORT_MEMORY;
|
|
itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
|
|
init_waitqueue_head(&itv->eos_waitq);
|
|
init_waitqueue_head(&itv->event_waitq);
|
|
init_waitqueue_head(&itv->vsync_waitq);
|
|
init_waitqueue_head(&itv->dma_waitq);
|
|
init_timer(&itv->dma_timer);
|
|
itv->dma_timer.function = ivtv_unfinished_dma;
|
|
itv->dma_timer.data = (unsigned long)itv;
|
|
|
|
itv->cur_dma_stream = -1;
|
|
itv->cur_pio_stream = -1;
|
|
itv->audio_stereo_mode = AUDIO_STEREO;
|
|
itv->audio_bilingual_mode = AUDIO_MONO_LEFT;
|
|
|
|
/* Ctrls */
|
|
itv->speed = 1000;
|
|
|
|
/* VBI */
|
|
itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
|
|
itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced;
|
|
|
|
/* Init the sg table for osd/yuv output */
|
|
sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT);
|
|
|
|
/* OSD */
|
|
itv->osd_global_alpha_state = 1;
|
|
itv->osd_global_alpha = 255;
|
|
|
|
/* YUV */
|
|
atomic_set(&itv->yuv_info.next_dma_frame, -1);
|
|
itv->yuv_info.lace_mode = ivtv_yuv_mode;
|
|
itv->yuv_info.lace_threshold = ivtv_yuv_threshold;
|
|
itv->yuv_info.max_frames_buffered = 3;
|
|
itv->yuv_info.track_osd = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* Second initialization part. Here the card type has been
|
|
autodetected. */
|
|
static void __devinit ivtv_init_struct2(struct ivtv *itv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++)
|
|
if (itv->card->video_inputs[i].video_type == 0)
|
|
break;
|
|
itv->nof_inputs = i;
|
|
for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++)
|
|
if (itv->card->audio_inputs[i].audio_type == 0)
|
|
break;
|
|
itv->nof_audio_inputs = i;
|
|
|
|
if (itv->card->hw_all & IVTV_HW_CX25840) {
|
|
itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */
|
|
} else {
|
|
itv->vbi.sliced_size = 64; /* multiple of 16, real size = 52 */
|
|
}
|
|
|
|
/* Find tuner input */
|
|
for (i = 0; i < itv->nof_inputs; i++) {
|
|
if (itv->card->video_inputs[i].video_type ==
|
|
IVTV_CARD_INPUT_VID_TUNER)
|
|
break;
|
|
}
|
|
if (i == itv->nof_inputs)
|
|
i = 0;
|
|
itv->active_input = i;
|
|
itv->audio_input = itv->card->video_inputs[i].audio_index;
|
|
}
|
|
|
|
static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
u16 cmd;
|
|
unsigned char pci_latency;
|
|
|
|
IVTV_DEBUG_INFO("Enabling pci device\n");
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
IVTV_ERR("Can't enable device!\n");
|
|
return -EIO;
|
|
}
|
|
if (pci_set_dma_mask(pdev, 0xffffffff)) {
|
|
IVTV_ERR("No suitable DMA available.\n");
|
|
return -EIO;
|
|
}
|
|
if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder")) {
|
|
IVTV_ERR("Cannot request encoder memory region.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!request_mem_region(itv->base_addr + IVTV_REG_OFFSET,
|
|
IVTV_REG_SIZE, "ivtv registers")) {
|
|
IVTV_ERR("Cannot request register memory region.\n");
|
|
release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
|
|
return -EIO;
|
|
}
|
|
|
|
if (itv->has_cx23415 &&
|
|
!request_mem_region(itv->base_addr + IVTV_DECODER_OFFSET,
|
|
IVTV_DECODER_SIZE, "ivtv decoder")) {
|
|
IVTV_ERR("Cannot request decoder memory region.\n");
|
|
release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
|
|
release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Check for bus mastering */
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
if (!(cmd & PCI_COMMAND_MASTER)) {
|
|
IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
|
|
pci_set_master(pdev);
|
|
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
|
|
if (!(cmd & PCI_COMMAND_MASTER)) {
|
|
IVTV_ERR("Bus Mastering is not enabled\n");
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
|
|
|
|
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
|
|
|
|
if (pci_latency < 64 && ivtv_pci_latency) {
|
|
IVTV_INFO("Unreasonably low latency timer, "
|
|
"setting to 64 (was %d)\n", pci_latency);
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
|
|
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
|
|
}
|
|
/* This config space value relates to DMA latencies. The
|
|
default value 0x8080 is too low however and will lead
|
|
to DMA errors. 0xffff is the max value which solves
|
|
these problems. */
|
|
pci_write_config_dword(pdev, 0x40, 0xffff);
|
|
|
|
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
|
|
"irq: %d, latency: %d, memory: 0x%lx\n",
|
|
pdev->device, pdev->revision, pdev->bus->number,
|
|
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
|
|
pdev->irq, pci_latency, (unsigned long)itv->base_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ivtv_load_and_init_modules(struct ivtv *itv)
|
|
{
|
|
u32 hw = itv->card->hw_all;
|
|
unsigned i;
|
|
|
|
/* check which i2c devices are actually found */
|
|
for (i = 0; i < 32; i++) {
|
|
u32 device = 1 << i;
|
|
|
|
if (!(device & hw))
|
|
continue;
|
|
if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) {
|
|
/* GPIO and TVEEPROM do not use i2c probing */
|
|
itv->hw_flags |= device;
|
|
continue;
|
|
}
|
|
if (ivtv_i2c_register(itv, i) == 0)
|
|
itv->hw_flags |= device;
|
|
}
|
|
|
|
/* probe for legacy IR controllers that aren't in card definitions */
|
|
if ((itv->hw_flags & IVTV_HW_IR_ANY) == 0)
|
|
ivtv_i2c_new_ir_legacy(itv);
|
|
|
|
if (itv->card->hw_all & IVTV_HW_CX25840)
|
|
itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840);
|
|
else if (itv->card->hw_all & IVTV_HW_SAA717X)
|
|
itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA717X);
|
|
else if (itv->card->hw_all & IVTV_HW_SAA7114)
|
|
itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7114);
|
|
else
|
|
itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7115);
|
|
itv->sd_audio = ivtv_find_hw(itv, itv->card->hw_audio_ctrl);
|
|
itv->sd_muxer = ivtv_find_hw(itv, itv->card->hw_muxer);
|
|
|
|
hw = itv->hw_flags;
|
|
|
|
if (itv->card->type == IVTV_CARD_CX23416GYC) {
|
|
/* Several variations of this card exist, detect which card
|
|
type should be used. */
|
|
if ((hw & (IVTV_HW_UPD64031A | IVTV_HW_UPD6408X)) == 0)
|
|
itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS);
|
|
else if ((hw & IVTV_HW_UPD64031A) == 0)
|
|
itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR);
|
|
}
|
|
else if (itv->card->type == IVTV_CARD_GV_MVPRX ||
|
|
itv->card->type == IVTV_CARD_GV_MVPRX2E) {
|
|
/* The crystal frequency of GVMVPRX is 24.576MHz */
|
|
v4l2_subdev_call(itv->sd_video, video, s_crystal_freq,
|
|
SAA7115_FREQ_24_576_MHZ, SAA7115_FREQ_FL_UCGC);
|
|
}
|
|
|
|
if (hw & IVTV_HW_CX25840) {
|
|
itv->vbi.raw_decoder_line_size = 1444;
|
|
itv->vbi.raw_decoder_sav_odd_field = 0x20;
|
|
itv->vbi.raw_decoder_sav_even_field = 0x60;
|
|
itv->vbi.sliced_decoder_line_size = 272;
|
|
itv->vbi.sliced_decoder_sav_odd_field = 0xB0;
|
|
itv->vbi.sliced_decoder_sav_even_field = 0xF0;
|
|
}
|
|
|
|
if (hw & IVTV_HW_SAA711X) {
|
|
struct v4l2_dbg_chip_ident v;
|
|
|
|
/* determine the exact saa711x model */
|
|
itv->hw_flags &= ~IVTV_HW_SAA711X;
|
|
|
|
v.match.type = V4L2_CHIP_MATCH_I2C_DRIVER;
|
|
strlcpy(v.match.name, "saa7115", sizeof(v.match.name));
|
|
ivtv_call_hw(itv, IVTV_HW_SAA711X, core, g_chip_ident, &v);
|
|
if (v.ident == V4L2_IDENT_SAA7114) {
|
|
itv->hw_flags |= IVTV_HW_SAA7114;
|
|
/* VBI is not yet supported by the saa7114 driver. */
|
|
itv->v4l2_cap &= ~(V4L2_CAP_SLICED_VBI_CAPTURE|V4L2_CAP_VBI_CAPTURE);
|
|
} else {
|
|
itv->hw_flags |= IVTV_HW_SAA7115;
|
|
}
|
|
itv->vbi.raw_decoder_line_size = 1443;
|
|
itv->vbi.raw_decoder_sav_odd_field = 0x25;
|
|
itv->vbi.raw_decoder_sav_even_field = 0x62;
|
|
itv->vbi.sliced_decoder_line_size = 51;
|
|
itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
|
|
itv->vbi.sliced_decoder_sav_even_field = 0xEC;
|
|
}
|
|
|
|
if (hw & IVTV_HW_SAA717X) {
|
|
itv->vbi.raw_decoder_line_size = 1443;
|
|
itv->vbi.raw_decoder_sav_odd_field = 0x25;
|
|
itv->vbi.raw_decoder_sav_even_field = 0x62;
|
|
itv->vbi.sliced_decoder_line_size = 51;
|
|
itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
|
|
itv->vbi.sliced_decoder_sav_even_field = 0xEC;
|
|
}
|
|
}
|
|
|
|
static int __devinit ivtv_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
int retval = 0;
|
|
int vbi_buf_size;
|
|
struct ivtv *itv;
|
|
|
|
itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC);
|
|
if (itv == NULL)
|
|
return -ENOMEM;
|
|
itv->pdev = pdev;
|
|
itv->instance = v4l2_device_set_name(&itv->v4l2_dev, "ivtv",
|
|
&ivtv_instance);
|
|
|
|
retval = v4l2_device_register(&pdev->dev, &itv->v4l2_dev);
|
|
if (retval) {
|
|
kfree(itv);
|
|
return retval;
|
|
}
|
|
IVTV_INFO("Initializing card %d\n", itv->instance);
|
|
|
|
ivtv_process_options(itv);
|
|
if (itv->options.cardtype == -1) {
|
|
retval = -ENODEV;
|
|
goto err;
|
|
}
|
|
if (ivtv_init_struct1(itv)) {
|
|
retval = -ENOMEM;
|
|
goto err;
|
|
}
|
|
retval = cx2341x_handler_init(&itv->cxhdl, 50);
|
|
if (retval)
|
|
goto err;
|
|
itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl;
|
|
itv->cxhdl.ops = &ivtv_cxhdl_ops;
|
|
itv->cxhdl.priv = itv;
|
|
itv->cxhdl.func = ivtv_api_func;
|
|
|
|
IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
|
|
|
|
/* PCI Device Setup */
|
|
retval = ivtv_setup_pci(itv, pdev, pci_id);
|
|
if (retval == -EIO)
|
|
goto free_worker;
|
|
if (retval == -ENXIO)
|
|
goto free_mem;
|
|
|
|
/* map io memory */
|
|
IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
|
|
itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
|
|
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
|
|
IVTV_ENCODER_SIZE);
|
|
if (!itv->enc_mem) {
|
|
IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
|
|
"encoder memory\n");
|
|
IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
|
|
"vmalloc address space for this window\n");
|
|
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
|
|
IVTV_ERR("Use the vmalloc= kernel command line option to set "
|
|
"VmallocTotal to a larger value\n");
|
|
retval = -ENOMEM;
|
|
goto free_mem;
|
|
}
|
|
|
|
if (itv->has_cx23415) {
|
|
IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
|
|
itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
|
|
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
|
|
IVTV_DECODER_SIZE);
|
|
if (!itv->dec_mem) {
|
|
IVTV_ERR("ioremap failed. Can't get a window into "
|
|
"CX23415 decoder memory\n");
|
|
IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
|
|
"of vmalloc address space for this window\n");
|
|
IVTV_ERR("Check the output of 'grep Vmalloc "
|
|
"/proc/meminfo'\n");
|
|
IVTV_ERR("Use the vmalloc= kernel command line option "
|
|
"to set VmallocTotal to a larger value\n");
|
|
retval = -ENOMEM;
|
|
goto free_mem;
|
|
}
|
|
}
|
|
else {
|
|
itv->dec_mem = itv->enc_mem;
|
|
}
|
|
|
|
/* map registers memory */
|
|
IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
|
|
itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
|
|
itv->reg_mem =
|
|
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
|
|
if (!itv->reg_mem) {
|
|
IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
|
|
"register space\n");
|
|
IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
|
|
"vmalloc address space for this window\n");
|
|
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
|
|
IVTV_ERR("Use the vmalloc= kernel command line option to set "
|
|
"VmallocTotal to a larger value\n");
|
|
retval = -ENOMEM;
|
|
goto free_io;
|
|
}
|
|
|
|
retval = ivtv_gpio_init(itv);
|
|
if (retval)
|
|
goto free_io;
|
|
|
|
/* active i2c */
|
|
IVTV_DEBUG_INFO("activating i2c...\n");
|
|
if (init_ivtv_i2c(itv)) {
|
|
IVTV_ERR("Could not initialize i2c\n");
|
|
goto free_io;
|
|
}
|
|
|
|
if (itv->card->hw_all & IVTV_HW_TVEEPROM) {
|
|
/* Based on the model number the cardtype may be changed.
|
|
The PCI IDs are not always reliable. */
|
|
ivtv_process_eeprom(itv);
|
|
}
|
|
if (itv->card->comment)
|
|
IVTV_INFO("%s", itv->card->comment);
|
|
if (itv->card->v4l2_capabilities == 0) {
|
|
/* card was detected but is not supported */
|
|
retval = -ENODEV;
|
|
goto free_i2c;
|
|
}
|
|
|
|
if (itv->std == 0) {
|
|
itv->std = V4L2_STD_NTSC_M;
|
|
}
|
|
|
|
if (itv->options.tuner == -1) {
|
|
int i;
|
|
|
|
for (i = 0; i < IVTV_CARD_MAX_TUNERS; i++) {
|
|
if ((itv->std & itv->card->tuners[i].std) == 0)
|
|
continue;
|
|
itv->options.tuner = itv->card->tuners[i].tuner;
|
|
break;
|
|
}
|
|
}
|
|
/* if no tuner was found, then pick the first tuner in the card list */
|
|
if (itv->options.tuner == -1 && itv->card->tuners[0].std) {
|
|
itv->std = itv->card->tuners[0].std;
|
|
if (itv->std & V4L2_STD_PAL)
|
|
itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
|
|
else if (itv->std & V4L2_STD_NTSC)
|
|
itv->std = V4L2_STD_NTSC_M;
|
|
else if (itv->std & V4L2_STD_SECAM)
|
|
itv->std = V4L2_STD_SECAM_L;
|
|
itv->options.tuner = itv->card->tuners[0].tuner;
|
|
}
|
|
if (itv->options.radio == -1)
|
|
itv->options.radio = (itv->card->radio_input.audio_type != 0);
|
|
|
|
/* The card is now fully identified, continue with card-specific
|
|
initialization. */
|
|
ivtv_init_struct2(itv);
|
|
|
|
ivtv_load_and_init_modules(itv);
|
|
|
|
if (itv->std & V4L2_STD_525_60) {
|
|
itv->is_60hz = 1;
|
|
itv->is_out_60hz = 1;
|
|
} else {
|
|
itv->is_50hz = 1;
|
|
itv->is_out_50hz = 1;
|
|
}
|
|
|
|
itv->yuv_info.osd_full_w = 720;
|
|
itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480;
|
|
itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
|
|
itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
|
|
|
|
cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz);
|
|
|
|
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
|
|
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
|
|
itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000;
|
|
itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000;
|
|
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000;
|
|
|
|
/* Setup VBI Raw Size. Should be big enough to hold PAL.
|
|
It is possible to switch between PAL and NTSC, so we need to
|
|
take the largest size here. */
|
|
/* 1456 is multiple of 16, real size = 1444 */
|
|
itv->vbi.raw_size = 1456;
|
|
/* We use a buffer size of 1/2 of the total size needed for a
|
|
frame. This is actually very useful, since we now receive
|
|
a field at a time and that makes 'compressing' the raw data
|
|
down to size by stripping off the SAV codes a lot easier.
|
|
Note: having two different buffer sizes prevents standard
|
|
switching on the fly. We need to find a better solution... */
|
|
vbi_buf_size = itv->vbi.raw_size * (itv->is_60hz ? 24 : 36) / 2;
|
|
itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_VBI] = vbi_buf_size;
|
|
itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_VBI] = sizeof(struct v4l2_sliced_vbi_data) * 36;
|
|
|
|
if (itv->options.radio > 0)
|
|
itv->v4l2_cap |= V4L2_CAP_RADIO;
|
|
|
|
if (itv->options.tuner > -1) {
|
|
struct tuner_setup setup;
|
|
|
|
setup.addr = ADDR_UNSET;
|
|
setup.type = itv->options.tuner;
|
|
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
|
|
if (itv->options.radio > 0)
|
|
setup.mode_mask |= T_RADIO;
|
|
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
|
|
ivtv_reset_tuner_gpio : NULL;
|
|
ivtv_call_all(itv, tuner, s_type_addr, &setup);
|
|
if (setup.type == TUNER_XC2028) {
|
|
static struct xc2028_ctrl ctrl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
};
|
|
struct v4l2_priv_tun_config cfg = {
|
|
.tuner = itv->options.tuner,
|
|
.priv = &ctrl,
|
|
};
|
|
ivtv_call_all(itv, tuner, s_config, &cfg);
|
|
}
|
|
}
|
|
|
|
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
|
|
are not. */
|
|
itv->tuner_std = itv->std;
|
|
|
|
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
|
|
ivtv_call_all(itv, video, s_std_output, itv->std);
|
|
/* Turn off the output signal. The mpeg decoder is not yet
|
|
active so without this you would get a green image until the
|
|
mpeg decoder becomes active. */
|
|
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
|
|
}
|
|
|
|
/* clear interrupt mask, effectively disabling interrupts */
|
|
ivtv_set_irq_mask(itv, 0xffffffff);
|
|
|
|
/* Register IRQ */
|
|
retval = request_irq(itv->pdev->irq, ivtv_irq_handler,
|
|
IRQF_SHARED | IRQF_DISABLED, itv->v4l2_dev.name, (void *)itv);
|
|
if (retval) {
|
|
IVTV_ERR("Failed to register irq %d\n", retval);
|
|
goto free_i2c;
|
|
}
|
|
|
|
retval = ivtv_streams_setup(itv);
|
|
if (retval) {
|
|
IVTV_ERR("Error %d setting up streams\n", retval);
|
|
goto free_irq;
|
|
}
|
|
retval = ivtv_streams_register(itv);
|
|
if (retval) {
|
|
IVTV_ERR("Error %d registering devices\n", retval);
|
|
goto free_streams;
|
|
}
|
|
IVTV_INFO("Initialized card: %s\n", itv->card_name);
|
|
return 0;
|
|
|
|
free_streams:
|
|
ivtv_streams_cleanup(itv, 1);
|
|
free_irq:
|
|
free_irq(itv->pdev->irq, (void *)itv);
|
|
free_i2c:
|
|
exit_ivtv_i2c(itv);
|
|
free_io:
|
|
ivtv_iounmap(itv);
|
|
free_mem:
|
|
release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
|
|
release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
|
|
if (itv->has_cx23415)
|
|
release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
|
|
free_worker:
|
|
kthread_stop(itv->irq_worker_task);
|
|
err:
|
|
if (retval == 0)
|
|
retval = -ENODEV;
|
|
IVTV_ERR("Error %d on initialization\n", retval);
|
|
|
|
v4l2_device_unregister(&itv->v4l2_dev);
|
|
kfree(itv);
|
|
return retval;
|
|
}
|
|
|
|
int ivtv_init_on_first_open(struct ivtv *itv)
|
|
{
|
|
struct v4l2_frequency vf;
|
|
/* Needed to call ioctls later */
|
|
struct ivtv_open_id fh;
|
|
int fw_retry_count = 3;
|
|
int video_input;
|
|
|
|
fh.itv = itv;
|
|
|
|
if (test_bit(IVTV_F_I_FAILED, &itv->i_flags))
|
|
return -ENXIO;
|
|
|
|
if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags))
|
|
return 0;
|
|
|
|
while (--fw_retry_count > 0) {
|
|
/* load firmware */
|
|
if (ivtv_firmware_init(itv) == 0)
|
|
break;
|
|
if (fw_retry_count > 1)
|
|
IVTV_WARN("Retry loading firmware\n");
|
|
}
|
|
|
|
if (fw_retry_count == 0) {
|
|
set_bit(IVTV_F_I_FAILED, &itv->i_flags);
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Try and get firmware versions */
|
|
IVTV_DEBUG_INFO("Getting firmware version..\n");
|
|
ivtv_firmware_versions(itv);
|
|
|
|
if (itv->card->hw_all & IVTV_HW_CX25840)
|
|
v4l2_subdev_call(itv->sd_video, core, load_fw);
|
|
|
|
vf.tuner = 0;
|
|
vf.type = V4L2_TUNER_ANALOG_TV;
|
|
vf.frequency = 6400; /* the tuner 'baseline' frequency */
|
|
|
|
/* Set initial frequency. For PAL/SECAM broadcasts no
|
|
'default' channel exists AFAIK. */
|
|
if (itv->std == V4L2_STD_NTSC_M_JP) {
|
|
vf.frequency = 1460; /* ch. 1 91250*16/1000 */
|
|
}
|
|
else if (itv->std & V4L2_STD_NTSC_M) {
|
|
vf.frequency = 1076; /* ch. 4 67250*16/1000 */
|
|
}
|
|
|
|
video_input = itv->active_input;
|
|
itv->active_input++; /* Force update of input */
|
|
ivtv_s_input(NULL, &fh, video_input);
|
|
|
|
/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
|
|
in one place. */
|
|
itv->std++; /* Force full standard initialization */
|
|
itv->std_out = itv->std;
|
|
ivtv_s_frequency(NULL, &fh, &vf);
|
|
|
|
if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
|
|
/* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
|
|
the mpeg decoder so now the saa7127 receives a proper
|
|
signal. */
|
|
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1);
|
|
ivtv_init_mpeg_decoder(itv);
|
|
}
|
|
|
|
/* On a cx23416 this seems to be able to enable DMA to the chip? */
|
|
if (!itv->has_cx23415)
|
|
write_reg_sync(0x03, IVTV_REG_DMACONTROL);
|
|
|
|
ivtv_s_std_enc(itv, &itv->tuner_std);
|
|
|
|
/* Default interrupts enabled. For the PVR350 this includes the
|
|
decoder VSYNC interrupt, which is always on. It is not only used
|
|
during decoding but also by the OSD.
|
|
Some old PVR250 cards had a cx23415, so testing for that is too
|
|
general. Instead test if the card has video output capability. */
|
|
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
|
|
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
|
|
ivtv_set_osd_alpha(itv);
|
|
ivtv_s_std_dec(itv, &itv->tuner_std);
|
|
} else {
|
|
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
|
|
}
|
|
|
|
/* Setup initial controls */
|
|
cx2341x_handler_setup(&itv->cxhdl);
|
|
return 0;
|
|
}
|
|
|
|
static void ivtv_remove(struct pci_dev *pdev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
|
|
struct ivtv *itv = to_ivtv(v4l2_dev);
|
|
int i;
|
|
|
|
IVTV_DEBUG_INFO("Removing card\n");
|
|
|
|
if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) {
|
|
/* Stop all captures */
|
|
IVTV_DEBUG_INFO("Stopping all streams\n");
|
|
if (atomic_read(&itv->capturing) > 0)
|
|
ivtv_stop_all_captures(itv);
|
|
|
|
/* Stop all decoding */
|
|
IVTV_DEBUG_INFO("Stopping decoding\n");
|
|
|
|
/* Turn off the TV-out */
|
|
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
|
|
ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
|
|
if (atomic_read(&itv->decoding) > 0) {
|
|
int type;
|
|
|
|
if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
|
|
type = IVTV_DEC_STREAM_TYPE_YUV;
|
|
else
|
|
type = IVTV_DEC_STREAM_TYPE_MPG;
|
|
ivtv_stop_v4l2_decode_stream(&itv->streams[type],
|
|
VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
|
|
}
|
|
ivtv_halt_firmware(itv);
|
|
}
|
|
|
|
/* Interrupts */
|
|
ivtv_set_irq_mask(itv, 0xffffffff);
|
|
del_timer_sync(&itv->dma_timer);
|
|
|
|
/* Kill irq worker */
|
|
flush_kthread_worker(&itv->irq_worker);
|
|
kthread_stop(itv->irq_worker_task);
|
|
|
|
ivtv_streams_cleanup(itv, 1);
|
|
ivtv_udma_free(itv);
|
|
|
|
exit_ivtv_i2c(itv);
|
|
|
|
free_irq(itv->pdev->irq, (void *)itv);
|
|
ivtv_iounmap(itv);
|
|
|
|
release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
|
|
release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
|
|
if (itv->has_cx23415)
|
|
release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
|
|
|
|
pci_disable_device(itv->pdev);
|
|
for (i = 0; i < IVTV_VBI_FRAMES; i++)
|
|
kfree(itv->vbi.sliced_mpeg_data[i]);
|
|
|
|
printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name);
|
|
|
|
v4l2_device_unregister(&itv->v4l2_dev);
|
|
kfree(itv);
|
|
}
|
|
|
|
/* define a pci_driver for card detection */
|
|
static struct pci_driver ivtv_pci_driver = {
|
|
.name = "ivtv",
|
|
.id_table = ivtv_pci_tbl,
|
|
.probe = ivtv_probe,
|
|
.remove = ivtv_remove,
|
|
};
|
|
|
|
static int __init module_start(void)
|
|
{
|
|
printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION);
|
|
|
|
/* Validate parameters */
|
|
if (ivtv_first_minor < 0 || ivtv_first_minor >= IVTV_MAX_CARDS) {
|
|
printk(KERN_ERR "ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
|
|
IVTV_MAX_CARDS - 1);
|
|
return -1;
|
|
}
|
|
|
|
if (ivtv_debug < 0 || ivtv_debug > 2047) {
|
|
ivtv_debug = 0;
|
|
printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n");
|
|
}
|
|
|
|
if (pci_register_driver(&ivtv_pci_driver)) {
|
|
printk(KERN_ERR "ivtv: Error detecting PCI card\n");
|
|
return -ENODEV;
|
|
}
|
|
printk(KERN_INFO "ivtv: End initialization\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit module_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&ivtv_pci_driver);
|
|
}
|
|
|
|
/* Note: These symbols are exported because they are used by the ivtvfb
|
|
framebuffer module and an infrared module for the IR-blaster. */
|
|
EXPORT_SYMBOL(ivtv_set_irq_mask);
|
|
EXPORT_SYMBOL(ivtv_api);
|
|
EXPORT_SYMBOL(ivtv_vapi);
|
|
EXPORT_SYMBOL(ivtv_vapi_result);
|
|
EXPORT_SYMBOL(ivtv_clear_irq_mask);
|
|
EXPORT_SYMBOL(ivtv_debug);
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
EXPORT_SYMBOL(ivtv_fw_debug);
|
|
#endif
|
|
EXPORT_SYMBOL(ivtv_reset_ir_gpio);
|
|
EXPORT_SYMBOL(ivtv_udma_setup);
|
|
EXPORT_SYMBOL(ivtv_udma_unmap);
|
|
EXPORT_SYMBOL(ivtv_udma_alloc);
|
|
EXPORT_SYMBOL(ivtv_udma_prepare);
|
|
EXPORT_SYMBOL(ivtv_init_on_first_open);
|
|
EXPORT_SYMBOL(ivtv_firmware_check);
|
|
|
|
module_init(module_start);
|
|
module_exit(module_cleanup);
|