linux/arch/arm/mach-imx/mach-mx31lite.c

299 lines
7.5 KiB
C

/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/moduleparam.h>
#include <linux/smsc911x.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/page.h>
#include <asm/setup.h>
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
/*
* This file contains the module-specific initialization routines.
*/
static unsigned int mx31lite_pins[] = {
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS1__SS1,
MX31_PIN_CSPI2_SS2__SS2,
};
static const struct mxc_nand_platform_data
mx31lite_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static struct smsc911x_platform_config smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT,
};
static struct resource smsc911x_resources[] = {
{
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smsc911x_config,
},
};
/*
* SPI
*
* The MC13783 is the only hard-wired SPI device on the module.
*/
static int spi_internal_chipselect[] = {
MXC_SPI_CS(0),
};
static const struct spi_imx_master spi1_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
.flags = MC13XXX_USE_RTC,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
};
/*
* USB
*/
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbh2_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_USBH2_CLK__USBH2_CLK,
MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT,
MX31_PIN_USBH2_STP__USBH2_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
"USBH2_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
/*
* NOR flash
*/
static struct physmap_flash_data nor_flash_data = {
.width = 2,
};
static struct resource nor_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device physmap_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_flash_data,
},
.resource = &nor_flash_resource,
.num_resources = 1,
};
/*
* This structure defines the MX31 memory map.
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
/*
* Set up static virtual mappings.
*/
void __init mx31lite_map_io(void)
{
mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
static int mx31lite_baseboard;
core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
static void __init mx31lite_init(void)
{
int ret;
imx31_soc_init();
switch (mx31lite_baseboard) {
case MX31LITE_NOBOARD:
break;
case MX31LITE_DB:
mx31lite_db_init();
break;
default:
printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
mx31lite_baseboard);
}
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
smsc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
smsc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
platform_device_register(&smsc911x_device);
}
}
static void __init mx31lite_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.restart = mxc_restart,
MACHINE_END