linux/arch/sh/include/mach-se/mach/se7780.h

110 lines
4.0 KiB
C

#ifndef __ASM_SH_SE7780_H
#define __ASM_SH_SE7780_H
/*
* linux/include/asm-sh/se7780.h
*
* Copyright (C) 2006,2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7780 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/sh_intc.h>
#include <asm/addrspace.h>
/* Box specific addresses. */
#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
#define PA_ROM 0xa0000000 /* EPROM */
#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
#define PA_FROM 0xa1000000 /* Flash-ROM */
#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
#define PA_EXT1 0xa4000000
#define PA_EXT1_SIZE 0x04000000
#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */
#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */
#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
#define PA_SDRAM_SIZE 0x08000000
#define PA_EXT4 0xb0000000
#define PA_EXT4_SIZE 0x04000000
#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */
#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */
#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */
#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */
#define DISP_CHAR_RAM (7 << 3)
#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0)
#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1)
#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2)
#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3)
#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4)
#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5)
#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6)
#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7)
#define DISP_UDC_RAM (5 << 3)
#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */
/* FPGA register address and bit */
#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */
#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */
#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */
#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */
#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */
#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */
#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */
#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */
#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */
#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */
#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */
#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */
#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */
#define PA_LED FPGA_DBG_LED
#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */
#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */
#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */
/* FPGA INTSEL position */
/* INTSEL1 */
#define IRQPOS_SMC91CX (0 * 4)
#define IRQPOS_SM501 (1 * 4)
/* INTSEL2 */
#define IRQPOS_EXTINT1 (0 * 4)
#define IRQPOS_EXTINT2 (1 * 4)
#define IRQPOS_EXTINT3 (2 * 4)
#define IRQPOS_EXTINT4 (3 * 4)
/* INTSEL3 */
#define IRQPOS_PCCPW (0 * 4)
/* IDE interrupt */
#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */
/* SMC interrupt */
#define SMC_IRQ evt2irq(0x300)
/* SM501 interrupt */
#define SM501_IRQ evt2irq(0x200)
/* interrupt pin */
#define IRQPIN_EXTINT1 0 /* IRQ0 pin */
#define IRQPIN_EXTINT2 1 /* IRQ1 pin */
#define IRQPIN_EXTINT3 2 /* IRQ2 pin */
#define IRQPIN_SMC91CX 3 /* IRQ3 pin */
#define IRQPIN_EXTINT4 4 /* IRQ4 pin */
#define IRQPIN_PCC0 5 /* IRQ5 pin */
#define IRQPIN_PCC2 6 /* IRQ6 pin */
#define IRQPIN_SM501 7 /* IRQ7 pin */
#define IRQPIN_PCCPW 7 /* IRQ7 pin */
/* arch/sh/boards/se/7780/irq.c */
void init_se7780_IRQ(void);
#define __IO_PREFIX se7780
#include <asm/io_generic.h>
#endif /* __ASM_SH_SE7780_H */