165 lines
6.5 KiB
Plaintext
165 lines
6.5 KiB
Plaintext
In-kernel memory-mapped I/O tracing
|
|
|
|
|
|
Home page and links to optional user space tools:
|
|
|
|
http://nouveau.freedesktop.org/wiki/MmioTrace
|
|
|
|
MMIO tracing was originally developed by Intel around 2003 for their Fault
|
|
Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel,
|
|
Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau
|
|
project in mind. Since then many people have contributed.
|
|
|
|
Mmiotrace was built for reverse engineering any memory-mapped IO device with
|
|
the Nouveau project as the first real user. Only x86 and x86_64 architectures
|
|
are supported.
|
|
|
|
Out-of-tree mmiotrace was originally modified for mainline inclusion and
|
|
ftrace framework by Pekka Paalanen <pq@iki.fi>.
|
|
|
|
|
|
Preparation
|
|
-----------
|
|
|
|
Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is
|
|
disabled by default, so it is safe to have this set to yes. SMP systems are
|
|
supported, but tracing is unreliable and may miss events if more than one CPU
|
|
is on-line, therefore mmiotrace takes all but one CPU off-line during run-time
|
|
activation. You can re-enable CPUs by hand, but you have been warned, there
|
|
is no way to automatically detect if you are losing events due to CPUs racing.
|
|
|
|
|
|
Usage Quick Reference
|
|
---------------------
|
|
|
|
$ mount -t debugfs debugfs /debug
|
|
$ echo mmiotrace > /debug/tracing/current_tracer
|
|
$ cat /debug/tracing/trace_pipe > mydump.txt &
|
|
Start X or whatever.
|
|
$ echo "X is up" > /debug/tracing/marker
|
|
$ echo none > /debug/tracing/current_tracer
|
|
Check for lost events.
|
|
|
|
|
|
Usage
|
|
-----
|
|
|
|
Make sure debugfs is mounted to /debug. If not, (requires root privileges)
|
|
$ mount -t debugfs debugfs /debug
|
|
|
|
Check that the driver you are about to trace is not loaded.
|
|
|
|
Activate mmiotrace (requires root privileges):
|
|
$ echo mmiotrace > /debug/tracing/current_tracer
|
|
|
|
Start storing the trace:
|
|
$ cat /debug/tracing/trace_pipe > mydump.txt &
|
|
The 'cat' process should stay running (sleeping) in the background.
|
|
|
|
Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
|
|
accesses to areas that are ioremapped while mmiotrace is active.
|
|
|
|
[Unimplemented feature:]
|
|
During tracing you can place comments (markers) into the trace by
|
|
$ echo "X is up" > /debug/tracing/marker
|
|
This makes it easier to see which part of the (huge) trace corresponds to
|
|
which action. It is recommended to place descriptive markers about what you
|
|
do.
|
|
|
|
Shut down mmiotrace (requires root privileges):
|
|
$ echo none > /debug/tracing/current_tracer
|
|
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
|
|
pressing ctrl+c.
|
|
|
|
Check that mmiotrace did not lose events due to a buffer filling up. Either
|
|
$ grep -i lost mydump.txt
|
|
which tells you exactly how many events were lost, or use
|
|
$ dmesg
|
|
to view your kernel log and look for "mmiotrace has lost events" warning. If
|
|
events were lost, the trace is incomplete. You should enlarge the buffers and
|
|
try again. Buffers are enlarged by first seeing how large the current buffers
|
|
are:
|
|
$ cat /debug/tracing/trace_entries
|
|
gives you a number. Approximately double this number and write it back, for
|
|
instance:
|
|
$ echo 128000 > /debug/tracing/trace_entries
|
|
Then start again from the top.
|
|
|
|
If you are doing a trace for a driver project, e.g. Nouveau, you should also
|
|
do the following before sending your results:
|
|
$ lspci -vvv > lspci.txt
|
|
$ dmesg > dmesg.txt
|
|
$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt
|
|
and then send the .tar.gz file. The trace compresses considerably. Replace
|
|
"pciid" and "nick" with the PCI ID or model name of your piece of hardware
|
|
under investigation and your nick name.
|
|
|
|
|
|
How Mmiotrace Works
|
|
-------------------
|
|
|
|
Access to hardware IO-memory is gained by mapping addresses from PCI bus by
|
|
calling one of the ioremap_*() functions. Mmiotrace is hooked into the
|
|
__ioremap() function and gets called whenever a mapping is created. Mapping is
|
|
an event that is recorded into the trace log. Note, that ISA range mappings
|
|
are not caught, since the mapping always exists and is returned directly.
|
|
|
|
MMIO accesses are recorded via page faults. Just before __ioremap() returns,
|
|
the mapped pages are marked as not present. Any access to the pages causes a
|
|
fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace
|
|
marks the page present, sets TF flag to achieve single stepping and exits the
|
|
fault handler. The instruction that faulted is executed and debug trap is
|
|
entered. Here mmiotrace again marks the page as not present. The instruction
|
|
is decoded to get the type of operation (read/write), data width and the value
|
|
read or written. These are stored to the trace log.
|
|
|
|
Setting the page present in the page fault handler has a race condition on SMP
|
|
machines. During the single stepping other CPUs may run freely on that page
|
|
and events can be missed without a notice. Re-enabling other CPUs during
|
|
tracing is discouraged.
|
|
|
|
|
|
Trace Log Format
|
|
----------------
|
|
|
|
The raw log is text and easily filtered with e.g. grep and awk. One record is
|
|
one line in the log. A record starts with a keyword, followed by keyword
|
|
dependant arguments. Arguments are separated by a space, or continue until the
|
|
end of line. The format for version 20070824 is as follows:
|
|
|
|
Explanation Keyword Space separated arguments
|
|
---------------------------------------------------------------------------
|
|
|
|
read event R width, timestamp, map id, physical, value, PC, PID
|
|
write event W width, timestamp, map id, physical, value, PC, PID
|
|
ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID
|
|
iounmap event UNMAP timestamp, map id, PC, PID
|
|
marker MARK timestamp, text
|
|
version VERSION the string "20070824"
|
|
info for reader LSPCI one line from lspci -v
|
|
PCI address map PCIDEV space separated /proc/bus/pci/devices data
|
|
unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID
|
|
|
|
Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual
|
|
is a kernel virtual address. Width is the data width in bytes and value is the
|
|
data value. Map id is an arbitrary id number identifying the mapping that was
|
|
used in an operation. PC is the program counter and PID is process id. PC is
|
|
zero if it is not recorded. PID is always zero as tracing MMIO accesses
|
|
originating in user space memory is not yet supported.
|
|
|
|
For instance, the following awk filter will pass all 32-bit writes that target
|
|
physical addresses in the range [0xfb73ce40, 0xfb800000[
|
|
|
|
$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 &&
|
|
adr < 0xfb800000) print; }'
|
|
|
|
|
|
Tools for Developers
|
|
--------------------
|
|
|
|
The user space tools include utilities for:
|
|
- replacing numeric addresses and values with hardware register names
|
|
- replaying MMIO logs, i.e., re-executing the recorded writes
|
|
|
|
|