818 lines
23 KiB
Plaintext
818 lines
23 KiB
Plaintext
PVR350 Video decoder registers 0x02002800 -> 0x02002B00
|
|
=======================================================
|
|
|
|
This list has been worked out through trial and error. There will be mistakes
|
|
and omissions. Some registers have no obvious effect so it's hard to say what
|
|
they do, while others interact with each other, or require a certain load
|
|
sequence. Horizontal filter setup is one example, with six registers working
|
|
in unison and requiring a certain load sequence to correctly configure. The
|
|
indexed colour palette is much easier to set at just two registers, but again
|
|
it requires a certain load sequence.
|
|
|
|
Some registers are fussy about what they are set to. Load in a bad value & the
|
|
decoder will fail. A firmware reload will often recover, but sometimes a reset
|
|
is required. For registers containing size information, setting them to 0 is
|
|
generally a bad idea. For other control registers i.e. 2878, you'll only find
|
|
out what values are bad when it hangs.
|
|
|
|
--------------------------------------------------------------------------------
|
|
2800
|
|
bit 0
|
|
Decoder enable
|
|
0 = disable
|
|
1 = enable
|
|
--------------------------------------------------------------------------------
|
|
2804
|
|
bits 0:31
|
|
Decoder horizontal Y alias register 1
|
|
---------------
|
|
2808
|
|
bits 0:31
|
|
Decoder horizontal Y alias register 2
|
|
---------------
|
|
280C
|
|
bits 0:31
|
|
Decoder horizontal Y alias register 3
|
|
---------------
|
|
2810
|
|
bits 0:31
|
|
Decoder horizontal Y alias register 4
|
|
---------------
|
|
2814
|
|
bits 0:31
|
|
Decoder horizontal Y alias register 5
|
|
---------------
|
|
2818
|
|
bits 0:31
|
|
Decoder horizontal Y alias trigger
|
|
|
|
These six registers control the horizontal aliasing filter for the Y plane.
|
|
The first five registers must all be loaded before accessing the trigger
|
|
(2818), as this register actually clocks the data through for the first
|
|
five.
|
|
|
|
To correctly program set the filter, this whole procedure must be done 16
|
|
times. The actual register contents are copied from a lookup-table in the
|
|
firmware which contains 4 different filter settings.
|
|
|
|
--------------------------------------------------------------------------------
|
|
281C
|
|
bits 0:31
|
|
Decoder horizontal UV alias register 1
|
|
---------------
|
|
2820
|
|
bits 0:31
|
|
Decoder horizontal UV alias register 2
|
|
---------------
|
|
2824
|
|
bits 0:31
|
|
Decoder horizontal UV alias register 3
|
|
---------------
|
|
2828
|
|
bits 0:31
|
|
Decoder horizontal UV alias register 4
|
|
---------------
|
|
282C
|
|
bits 0:31
|
|
Decoder horizontal UV alias register 5
|
|
---------------
|
|
2830
|
|
bits 0:31
|
|
Decoder horizontal UV alias trigger
|
|
|
|
These six registers control the horizontal aliasing for the UV plane.
|
|
Operation is the same as the Y filter, with 2830 being the trigger
|
|
register.
|
|
|
|
--------------------------------------------------------------------------------
|
|
2834
|
|
bits 0:15
|
|
Decoder Y source width in pixels
|
|
|
|
bits 16:31
|
|
Decoder Y destination width in pixels
|
|
---------------
|
|
2838
|
|
bits 0:15
|
|
Decoder UV source width in pixels
|
|
|
|
bits 16:31
|
|
Decoder UV destination width in pixels
|
|
|
|
NOTE: For both registers, the resulting image must be fully visible on
|
|
screen. If the image exceeds the right edge both the source and destination
|
|
size must be adjusted to reflect the visible portion. For the source width,
|
|
you must take into account the scaling when calculating the new value.
|
|
--------------------------------------------------------------------------------
|
|
|
|
283C
|
|
bits 0:31
|
|
Decoder Y horizontal scaling
|
|
Normally = Reg 2854 >> 2
|
|
---------------
|
|
2840
|
|
bits 0:31
|
|
Decoder ?? unknown - horizontal scaling
|
|
Usually 0x00080514
|
|
---------------
|
|
2844
|
|
bits 0:31
|
|
Decoder UV horizontal scaling
|
|
Normally = Reg 2854 >> 2
|
|
---------------
|
|
2848
|
|
bits 0:31
|
|
Decoder ?? unknown - horizontal scaling
|
|
Usually 0x00100514
|
|
---------------
|
|
284C
|
|
bits 0:31
|
|
Decoder ?? unknown - Y plane
|
|
Usually 0x00200020
|
|
---------------
|
|
2850
|
|
bits 0:31
|
|
Decoder ?? unknown - UV plane
|
|
Usually 0x00200020
|
|
---------------
|
|
2854
|
|
bits 0:31
|
|
Decoder 'master' value for horizontal scaling
|
|
---------------
|
|
2858
|
|
bits 0:31
|
|
Decoder ?? unknown
|
|
Usually 0
|
|
---------------
|
|
285C
|
|
bits 0:31
|
|
Decoder ?? unknown
|
|
Normally = Reg 2854 >> 1
|
|
---------------
|
|
2860
|
|
bits 0:31
|
|
Decoder ?? unknown
|
|
Usually 0
|
|
---------------
|
|
2864
|
|
bits 0:31
|
|
Decoder ?? unknown
|
|
Normally = Reg 2854 >> 1
|
|
---------------
|
|
2868
|
|
bits 0:31
|
|
Decoder ?? unknown
|
|
Usually 0
|
|
|
|
Most of these registers either control horizontal scaling, or appear linked
|
|
to it in some way. Register 2854 contains the 'master' value & the other
|
|
registers can be calculated from that one. You must also remember to
|
|
correctly set the divider in Reg 2874.
|
|
|
|
To enlarge:
|
|
Reg 2854 = (source_width * 0x00200000) / destination_width
|
|
Reg 2874 = No divide
|
|
|
|
To reduce from full size down to half size:
|
|
Reg 2854 = (source_width/2 * 0x00200000) / destination width
|
|
Reg 2874 = Divide by 2
|
|
|
|
To reduce from half size down to quarter size:
|
|
Reg 2854 = (source_width/4 * 0x00200000) / destination width
|
|
Reg 2874 = Divide by 4
|
|
|
|
The result is always rounded up.
|
|
|
|
--------------------------------------------------------------------------------
|
|
286C
|
|
bits 0:15
|
|
Decoder horizontal Y buffer offset
|
|
|
|
bits 15:31
|
|
Decoder horizontal UV buffer offset
|
|
|
|
Offset into the video image buffer. If the offset is gradually incremented,
|
|
the on screen image will move left & wrap around higher up on the right.
|
|
|
|
--------------------------------------------------------------------------------
|
|
2870
|
|
bits 0:15
|
|
Decoder horizontal Y output offset
|
|
|
|
bits 16:31
|
|
Decoder horizontal UV output offset
|
|
|
|
Offsets the actual video output. Controls output alignment of the Y & UV
|
|
planes. The higher the value, the greater the shift to the left. Use
|
|
reg 2890 to move the image right.
|
|
|
|
--------------------------------------------------------------------------------
|
|
2874
|
|
bits 0:1
|
|
Decoder horizontal Y output size divider
|
|
00 = No divide
|
|
01 = Divide by 2
|
|
10 = Divide by 3
|
|
|
|
bits 4:5
|
|
Decoder horizontal UV output size divider
|
|
00 = No divide
|
|
01 = Divide by 2
|
|
10 = Divide by 3
|
|
|
|
bit 8
|
|
Decoder ?? unknown
|
|
0 = Normal
|
|
1 = Affects video output levels
|
|
|
|
bit 16
|
|
Decoder ?? unknown
|
|
0 = Normal
|
|
1 = Disable horizontal filter
|
|
|
|
--------------------------------------------------------------------------------
|
|
2878
|
|
bit 0
|
|
?? unknown
|
|
|
|
bit 1
|
|
osd on/off
|
|
0 = osd off
|
|
1 = osd on
|
|
|
|
bit 2
|
|
Decoder + osd video timing
|
|
0 = NTSC
|
|
1 = PAL
|
|
|
|
bits 3:4
|
|
?? unknown
|
|
|
|
bit 5
|
|
Decoder + osd
|
|
Swaps upper & lower fields
|
|
|
|
--------------------------------------------------------------------------------
|
|
287C
|
|
bits 0:10
|
|
Decoder & osd ?? unknown
|
|
Moves entire screen horizontally. Starts at 0x005 with the screen
|
|
shifted heavily to the right. Incrementing in steps of 0x004 will
|
|
gradually shift the screen to the left.
|
|
|
|
bits 11:31
|
|
?? unknown
|
|
|
|
Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL)
|
|
|
|
--------------------------------------------------------------------------------
|
|
2880 -------- ?? unknown
|
|
2884 -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
2888
|
|
bit 0
|
|
Decoder + osd ?? unknown
|
|
0 = Normal
|
|
1 = Misaligned fields (Correctable through 289C & 28A4)
|
|
|
|
bit 4
|
|
?? unknown
|
|
|
|
bit 8
|
|
?? unknown
|
|
|
|
Warning: Bad values will require a firmware reload to recover.
|
|
Known to be bad are 0x000,0x011,0x100,0x111
|
|
--------------------------------------------------------------------------------
|
|
288C
|
|
bits 0:15
|
|
osd ?? unknown
|
|
Appears to affect the osd position stability. The higher the value the
|
|
more unstable it becomes. Decoder output remains stable.
|
|
|
|
bits 16:31
|
|
osd ?? unknown
|
|
Same as bits 0:15
|
|
|
|
--------------------------------------------------------------------------------
|
|
2890
|
|
bits 0:11
|
|
Decoder output horizontal offset.
|
|
|
|
Horizontal offset moves the video image right. A small left shift is
|
|
possible, but it's better to use reg 2870 for that due to its greater
|
|
range.
|
|
|
|
NOTE: Video corruption will occur if video window is shifted off the right
|
|
edge. To avoid this read the notes for 2834 & 2838.
|
|
--------------------------------------------------------------------------------
|
|
2894
|
|
bits 0:23
|
|
Decoder output video surround colour.
|
|
|
|
Contains the colour (in yuv) used to fill the screen when the video is
|
|
running in a window.
|
|
--------------------------------------------------------------------------------
|
|
2898
|
|
bits 0:23
|
|
Decoder video window colour
|
|
Contains the colour (in yuv) used to fill the video window when the
|
|
video is turned off.
|
|
|
|
bit 24
|
|
Decoder video output
|
|
0 = Video on
|
|
1 = Video off
|
|
|
|
bit 28
|
|
Decoder plane order
|
|
0 = Y,UV
|
|
1 = UV,Y
|
|
|
|
bit 29
|
|
Decoder second plane byte order
|
|
0 = Normal (UV)
|
|
1 = Swapped (VU)
|
|
|
|
In normal usage, the first plane is Y & the second plane is UV. Though the
|
|
order of the planes can be swapped, only the byte order of the second plane
|
|
can be swapped. This isn't much use for the Y plane, but can be useful for
|
|
the UV plane.
|
|
|
|
--------------------------------------------------------------------------------
|
|
289C
|
|
bits 0:15
|
|
Decoder vertical field offset 1
|
|
|
|
bits 16:31
|
|
Decoder vertical field offset 2
|
|
|
|
Controls field output vertical alignment. The higher the number, the lower
|
|
the image on screen. Known starting values are 0x011E0017 (NTSC) &
|
|
0x01500017 (PAL)
|
|
--------------------------------------------------------------------------------
|
|
28A0
|
|
bits 0:15
|
|
Decoder & osd width in pixels
|
|
|
|
bits 16:31
|
|
Decoder & osd height in pixels
|
|
|
|
All output from the decoder & osd are disabled beyond this area. Decoder
|
|
output will simply go black outside of this region. If the osd tries to
|
|
exceed this area it will become corrupt.
|
|
--------------------------------------------------------------------------------
|
|
28A4
|
|
bits 0:11
|
|
osd left shift.
|
|
|
|
Has a range of 0x770->0x7FF. With the exception of 0, any value outside of
|
|
this range corrupts the osd.
|
|
--------------------------------------------------------------------------------
|
|
28A8
|
|
bits 0:15
|
|
osd vertical field offset 1
|
|
|
|
bits 16:31
|
|
osd vertical field offset 2
|
|
|
|
Controls field output vertical alignment. The higher the number, the lower
|
|
the image on screen. Known starting values are 0x011E0017 (NTSC) &
|
|
0x01500017 (PAL)
|
|
--------------------------------------------------------------------------------
|
|
28AC -------- ?? unknown
|
|
|
|
|
V
|
|
28BC -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
28C0
|
|
bit 0
|
|
Current output field
|
|
0 = first field
|
|
1 = second field
|
|
|
|
bits 16:31
|
|
Current scanline
|
|
The scanline counts from the top line of the first field
|
|
through to the last line of the second field.
|
|
--------------------------------------------------------------------------------
|
|
28C4 -------- ?? unknown
|
|
|
|
|
V
|
|
28F8 -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
28FC
|
|
bit 0
|
|
?? unknown
|
|
0 = Normal
|
|
1 = Breaks decoder & osd output
|
|
--------------------------------------------------------------------------------
|
|
2900
|
|
bits 0:31
|
|
Decoder vertical Y alias register 1
|
|
---------------
|
|
2904
|
|
bits 0:31
|
|
Decoder vertical Y alias register 2
|
|
---------------
|
|
2908
|
|
bits 0:31
|
|
Decoder vertical Y alias trigger
|
|
|
|
These three registers control the vertical aliasing filter for the Y plane.
|
|
Operation is similar to the horizontal Y filter (2804). The only real
|
|
difference is that there are only two registers to set before accessing
|
|
the trigger register (2908). As for the horizontal filter, the values are
|
|
taken from a lookup table in the firmware, and the procedure must be
|
|
repeated 16 times to fully program the filter.
|
|
--------------------------------------------------------------------------------
|
|
290C
|
|
bits 0:31
|
|
Decoder vertical UV alias register 1
|
|
---------------
|
|
2910
|
|
bits 0:31
|
|
Decoder vertical UV alias register 2
|
|
---------------
|
|
2914
|
|
bits 0:31
|
|
Decoder vertical UV alias trigger
|
|
|
|
These three registers control the vertical aliasing filter for the UV
|
|
plane. Operation is the same as the Y filter, with 2914 being the trigger.
|
|
--------------------------------------------------------------------------------
|
|
2918
|
|
bits 0:15
|
|
Decoder Y source height in pixels
|
|
|
|
bits 16:31
|
|
Decoder Y destination height in pixels
|
|
---------------
|
|
291C
|
|
bits 0:15
|
|
Decoder UV source height in pixels divided by 2
|
|
|
|
bits 16:31
|
|
Decoder UV destination height in pixels
|
|
|
|
NOTE: For both registers, the resulting image must be fully visible on
|
|
screen. If the image exceeds the bottom edge both the source and
|
|
destination size must be adjusted to reflect the visible portion. For the
|
|
source height, you must take into account the scaling when calculating the
|
|
new value.
|
|
--------------------------------------------------------------------------------
|
|
2920
|
|
bits 0:31
|
|
Decoder Y vertical scaling
|
|
Normally = Reg 2930 >> 2
|
|
---------------
|
|
2924
|
|
bits 0:31
|
|
Decoder Y vertical scaling
|
|
Normally = Reg 2920 + 0x514
|
|
---------------
|
|
2928
|
|
bits 0:31
|
|
Decoder UV vertical scaling
|
|
When enlarging = Reg 2930 >> 2
|
|
When reducing = Reg 2930 >> 3
|
|
---------------
|
|
292C
|
|
bits 0:31
|
|
Decoder UV vertical scaling
|
|
Normally = Reg 2928 + 0x514
|
|
---------------
|
|
2930
|
|
bits 0:31
|
|
Decoder 'master' value for vertical scaling
|
|
---------------
|
|
2934
|
|
bits 0:31
|
|
Decoder ?? unknown - Y vertical scaling
|
|
---------------
|
|
2938
|
|
bits 0:31
|
|
Decoder Y vertical scaling
|
|
Normally = Reg 2930
|
|
---------------
|
|
293C
|
|
bits 0:31
|
|
Decoder ?? unknown - Y vertical scaling
|
|
---------------
|
|
2940
|
|
bits 0:31
|
|
Decoder UV vertical scaling
|
|
When enlarging = Reg 2930 >> 1
|
|
When reducing = Reg 2930
|
|
---------------
|
|
2944
|
|
bits 0:31
|
|
Decoder ?? unknown - UV vertical scaling
|
|
---------------
|
|
2948
|
|
bits 0:31
|
|
Decoder UV vertical scaling
|
|
Normally = Reg 2940
|
|
---------------
|
|
294C
|
|
bits 0:31
|
|
Decoder ?? unknown - UV vertical scaling
|
|
|
|
Most of these registers either control vertical scaling, or appear linked
|
|
to it in some way. Register 2930 contains the 'master' value & all other
|
|
registers can be calculated from that one. You must also remember to
|
|
correctly set the divider in Reg 296C
|
|
|
|
To enlarge:
|
|
Reg 2930 = (source_height * 0x00200000) / destination_height
|
|
Reg 296C = No divide
|
|
|
|
To reduce from full size down to half size:
|
|
Reg 2930 = (source_height/2 * 0x00200000) / destination height
|
|
Reg 296C = Divide by 2
|
|
|
|
To reduce from half down to quarter.
|
|
Reg 2930 = (source_height/4 * 0x00200000) / destination height
|
|
Reg 296C = Divide by 4
|
|
|
|
--------------------------------------------------------------------------------
|
|
2950
|
|
bits 0:15
|
|
Decoder Y line index into display buffer, first field
|
|
|
|
bits 16:31
|
|
Decoder Y vertical line skip, first field
|
|
--------------------------------------------------------------------------------
|
|
2954
|
|
bits 0:15
|
|
Decoder Y line index into display buffer, second field
|
|
|
|
bits 16:31
|
|
Decoder Y vertical line skip, second field
|
|
--------------------------------------------------------------------------------
|
|
2958
|
|
bits 0:15
|
|
Decoder UV line index into display buffer, first field
|
|
|
|
bits 16:31
|
|
Decoder UV vertical line skip, first field
|
|
--------------------------------------------------------------------------------
|
|
295C
|
|
bits 0:15
|
|
Decoder UV line index into display buffer, second field
|
|
|
|
bits 16:31
|
|
Decoder UV vertical line skip, second field
|
|
--------------------------------------------------------------------------------
|
|
2960
|
|
bits 0:15
|
|
Decoder destination height minus 1
|
|
|
|
bits 16:31
|
|
Decoder destination height divided by 2
|
|
--------------------------------------------------------------------------------
|
|
2964
|
|
bits 0:15
|
|
Decoder Y vertical offset, second field
|
|
|
|
bits 16:31
|
|
Decoder Y vertical offset, first field
|
|
|
|
These two registers shift the Y plane up. The higher the number, the
|
|
greater the shift.
|
|
--------------------------------------------------------------------------------
|
|
2968
|
|
bits 0:15
|
|
Decoder UV vertical offset, second field
|
|
|
|
bits 16:31
|
|
Decoder UV vertical offset, first field
|
|
|
|
These two registers shift the UV plane up. The higher the number, the
|
|
greater the shift.
|
|
--------------------------------------------------------------------------------
|
|
296C
|
|
bits 0:1
|
|
Decoder vertical Y output size divider
|
|
00 = No divide
|
|
01 = Divide by 2
|
|
10 = Divide by 4
|
|
|
|
bits 8:9
|
|
Decoder vertical UV output size divider
|
|
00 = No divide
|
|
01 = Divide by 2
|
|
10 = Divide by 4
|
|
--------------------------------------------------------------------------------
|
|
2970
|
|
bit 0
|
|
Decoder ?? unknown
|
|
0 = Normal
|
|
1 = Affect video output levels
|
|
|
|
bit 16
|
|
Decoder ?? unknown
|
|
0 = Normal
|
|
1 = Disable vertical filter
|
|
|
|
--------------------------------------------------------------------------------
|
|
2974 -------- ?? unknown
|
|
|
|
|
V
|
|
29EF -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
2A00
|
|
bits 0:2
|
|
osd colour mode
|
|
000 = 8 bit indexed
|
|
001 = 16 bit (565)
|
|
010 = 15 bit (555)
|
|
011 = 12 bit (444)
|
|
100 = 32 bit (8888)
|
|
|
|
bits 4:5
|
|
osd display bpp
|
|
01 = 8 bit
|
|
10 = 16 bit
|
|
11 = 32 bit
|
|
|
|
bit 8
|
|
osd global alpha
|
|
0 = Off
|
|
1 = On
|
|
|
|
bit 9
|
|
osd local alpha
|
|
0 = Off
|
|
1 = On
|
|
|
|
bit 10
|
|
osd colour key
|
|
0 = Off
|
|
1 = On
|
|
|
|
bit 11
|
|
osd ?? unknown
|
|
Must be 1
|
|
|
|
bit 13
|
|
osd colour space
|
|
0 = ARGB
|
|
1 = AYVU
|
|
|
|
bits 16:31
|
|
osd ?? unknown
|
|
Must be 0x001B (some kind of buffer pointer ?)
|
|
|
|
When the bits-per-pixel is set to 8, the colour mode is ignored and
|
|
assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth
|
|
is honoured, and when using a colour depth that requires fewer bytes than
|
|
allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit
|
|
index colour, there are 3 padding bytes per pixel. It's also possible to
|
|
select 16bpp with a 32 bit colour mode. This results in the pixel width
|
|
being doubled, but the color key will not work as expected in this mode.
|
|
|
|
Colour key is as it suggests. You designate a colour which will become
|
|
completely transparent. When using 565, 555 or 444 colour modes, the
|
|
colour key is always 16 bits wide. The colour to key on is set in Reg 2A18.
|
|
|
|
Local alpha works differently depending on the colour mode. For 32bpp & 8
|
|
bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being
|
|
transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused
|
|
bit(s) act as a simple transparency switch, with 0 being solid & 1 being
|
|
fully transparent. There is no local alpha support for 16bit 565.
|
|
|
|
Global alpha is a 256 step transparency that applies to the entire osd,
|
|
with 0 being transparent & 255 being solid.
|
|
|
|
It's possible to combine colour key, local alpha & global alpha.
|
|
--------------------------------------------------------------------------------
|
|
2A04
|
|
bits 0:15
|
|
osd x coord for left edge
|
|
|
|
bits 16:31
|
|
osd y coord for top edge
|
|
---------------
|
|
2A08
|
|
bits 0:15
|
|
osd x coord for right edge
|
|
|
|
bits 16:31
|
|
osd y coord for bottom edge
|
|
|
|
For both registers, (0,0) = top left corner of the display area. These
|
|
registers do not control the osd size, only where it's positioned & how
|
|
much is visible. The visible osd area cannot exceed the right edge of the
|
|
display, otherwise the osd will become corrupt. See reg 2A10 for
|
|
setting osd width.
|
|
--------------------------------------------------------------------------------
|
|
2A0C
|
|
bits 0:31
|
|
osd buffer index
|
|
|
|
An index into the osd buffer. Slowly incrementing this moves the osd left,
|
|
wrapping around onto the right edge
|
|
--------------------------------------------------------------------------------
|
|
2A10
|
|
bits 0:11
|
|
osd buffer 32 bit word width
|
|
|
|
Contains the width of the osd measured in 32 bit words. This means that all
|
|
colour modes are restricted to a byte width which is divisible by 4.
|
|
--------------------------------------------------------------------------------
|
|
2A14
|
|
bits 0:15
|
|
osd height in pixels
|
|
|
|
bits 16:32
|
|
osd line index into buffer
|
|
osd will start displaying from this line.
|
|
--------------------------------------------------------------------------------
|
|
2A18
|
|
bits 0:31
|
|
osd colour key
|
|
|
|
Contains the colour value which will be transparent.
|
|
--------------------------------------------------------------------------------
|
|
2A1C
|
|
bits 0:7
|
|
osd global alpha
|
|
|
|
Contains the global alpha value (equiv ivtvfbctl --alpha XX)
|
|
--------------------------------------------------------------------------------
|
|
2A20 -------- ?? unknown
|
|
|
|
|
V
|
|
2A2C -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
2A30
|
|
bits 0:7
|
|
osd colour to change in indexed palette
|
|
---------------
|
|
2A34
|
|
bits 0:31
|
|
osd colour for indexed palette
|
|
|
|
To set the new palette, first load the index of the colour to change into
|
|
2A30, then load the new colour into 2A34. The full palette is 256 colours,
|
|
so the index range is 0x00-0xFF
|
|
--------------------------------------------------------------------------------
|
|
2A38 -------- ?? unknown
|
|
2A3C -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
2A40
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Affects overall brightness, wrapping around to black
|
|
--------------------------------------------------------------------------------
|
|
2A44
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Green tint
|
|
--------------------------------------------------------------------------------
|
|
2A48
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Red tint
|
|
--------------------------------------------------------------------------------
|
|
2A4C
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Affects overall brightness, wrapping around to black
|
|
--------------------------------------------------------------------------------
|
|
2A50
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Colour shift
|
|
--------------------------------------------------------------------------------
|
|
2A54
|
|
bits 0:31
|
|
osd ?? unknown
|
|
|
|
Colour shift
|
|
--------------------------------------------------------------------------------
|
|
2A58 -------- ?? unknown
|
|
|
|
|
V
|
|
2AFC -------- ?? unknown
|
|
--------------------------------------------------------------------------------
|
|
2B00
|
|
bit 0
|
|
osd filter control
|
|
0 = filter off
|
|
1 = filter on
|
|
|
|
bits 1:4
|
|
osd ?? unknown
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
v0.4 - 12 March 2007 - Ian Armstrong (ian@iarmst.demon.co.uk)
|
|
|