391 lines
9.9 KiB
C
391 lines
9.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Real Time Clock (RTC) Driver for i.MX53
|
|
* Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
|
|
* Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */
|
|
|
|
#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */
|
|
#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */
|
|
#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */
|
|
#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */
|
|
#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */
|
|
#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */
|
|
|
|
#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */
|
|
#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */
|
|
#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */
|
|
|
|
#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */
|
|
#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */
|
|
#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */
|
|
#define SRTC_LPCR 0x10 /* LP Control Reg */
|
|
#define SRTC_LPSR 0x14 /* LP Status Reg */
|
|
#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */
|
|
|
|
/* max. number of retries to read registers, 120 was max during test */
|
|
#define REG_READ_TIMEOUT 2000
|
|
|
|
struct mxc_rtc_data {
|
|
struct rtc_device *rtc;
|
|
void __iomem *ioaddr;
|
|
struct clk *clk;
|
|
spinlock_t lock; /* protects register access */
|
|
int irq;
|
|
};
|
|
|
|
/*
|
|
* This function does write synchronization for writes to the lp srtc block.
|
|
* To take care of the asynchronous CKIL clock, all writes from the IP domain
|
|
* will be synchronized to the CKIL domain.
|
|
* The caller should hold the pdata->lock
|
|
*/
|
|
static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Wait for 3 CKIL cycles */
|
|
for (i = 0; i < 3; i++) {
|
|
const u32 count = readl(ioaddr + SRTC_LPSCLR);
|
|
unsigned int timeout = REG_READ_TIMEOUT;
|
|
|
|
while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
|
|
if (!--timeout) {
|
|
dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* This function is the RTC interrupt service routine. */
|
|
static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct device *dev = dev_id;
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
unsigned long flags;
|
|
u32 lp_status;
|
|
u32 lp_cr;
|
|
|
|
spin_lock_irqsave(&pdata->lock, flags);
|
|
if (clk_enable(pdata->clk)) {
|
|
spin_unlock_irqrestore(&pdata->lock, flags);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
lp_status = readl(ioaddr + SRTC_LPSR);
|
|
lp_cr = readl(ioaddr + SRTC_LPCR);
|
|
|
|
/* update irq data & counter */
|
|
if (lp_status & SRTC_LPSR_ALP) {
|
|
if (lp_cr & SRTC_LPCR_ALP)
|
|
rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
|
|
|
|
/* disable further lp alarm interrupts */
|
|
lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
|
|
}
|
|
|
|
/* Update interrupt enables */
|
|
writel(lp_cr, ioaddr + SRTC_LPCR);
|
|
|
|
/* clear interrupt status */
|
|
writel(lp_status, ioaddr + SRTC_LPSR);
|
|
|
|
mxc_rtc_sync_lp_locked(dev, ioaddr);
|
|
clk_disable(pdata->clk);
|
|
spin_unlock_irqrestore(&pdata->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Enable clk and aquire spinlock
|
|
* @return 0 if successful; non-zero otherwise.
|
|
*/
|
|
static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
|
|
{
|
|
int ret;
|
|
|
|
spin_lock_irq(&pdata->lock);
|
|
ret = clk_enable(pdata->clk);
|
|
if (ret) {
|
|
spin_unlock_irq(&pdata->lock);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
|
|
{
|
|
clk_disable(pdata->clk);
|
|
spin_unlock_irq(&pdata->lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function reads the current RTC time into tm in Gregorian date.
|
|
*
|
|
* @param tm contains the RTC time value upon return
|
|
*
|
|
* @return 0 if successful; non-zero otherwise.
|
|
*/
|
|
static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
const int clk_failed = clk_enable(pdata->clk);
|
|
|
|
if (!clk_failed) {
|
|
const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
|
|
|
|
rtc_time64_to_tm(now, tm);
|
|
clk_disable(pdata->clk);
|
|
return 0;
|
|
}
|
|
return clk_failed;
|
|
}
|
|
|
|
/*
|
|
* This function sets the internal RTC time based on tm in Gregorian date.
|
|
*
|
|
* @param tm the time value to be set in the RTC
|
|
*
|
|
* @return 0 if successful; non-zero otherwise.
|
|
*/
|
|
static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
time64_t time = rtc_tm_to_time64(tm);
|
|
int ret;
|
|
|
|
ret = mxc_rtc_lock(pdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(time, pdata->ioaddr + SRTC_LPSCMR);
|
|
mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
|
|
return mxc_rtc_unlock(pdata);
|
|
}
|
|
|
|
/*
|
|
* This function reads the current alarm value into the passed in \b alrm
|
|
* argument. It updates the \b alrm's pending field value based on the whether
|
|
* an alarm interrupt occurs or not.
|
|
*
|
|
* @param alrm contains the RTC alarm value upon return
|
|
*
|
|
* @return 0 if successful; non-zero otherwise.
|
|
*/
|
|
static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
void __iomem *ioaddr = pdata->ioaddr;
|
|
int ret;
|
|
|
|
ret = mxc_rtc_lock(pdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
|
|
alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
|
|
return mxc_rtc_unlock(pdata);
|
|
}
|
|
|
|
/*
|
|
* Enable/Disable alarm interrupt
|
|
* The caller should hold the pdata->lock
|
|
*/
|
|
static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
|
|
unsigned int enable)
|
|
{
|
|
u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
|
|
|
|
if (enable)
|
|
lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
|
|
else
|
|
lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
|
|
|
|
writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
|
|
}
|
|
|
|
static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
|
|
{
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
int ret = mxc_rtc_lock(pdata);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
mxc_rtc_alarm_irq_enable_locked(pdata, enable);
|
|
return mxc_rtc_unlock(pdata);
|
|
}
|
|
|
|
/*
|
|
* This function sets the RTC alarm based on passed in alrm.
|
|
*
|
|
* @param alrm the alarm value to be set in the RTC
|
|
*
|
|
* @return 0 if successful; non-zero otherwise.
|
|
*/
|
|
static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
const time64_t time = rtc_tm_to_time64(&alrm->time);
|
|
struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
|
|
int ret = mxc_rtc_lock(pdata);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
|
|
|
|
/* clear alarm interrupt status bit */
|
|
writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
|
|
mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
|
|
|
|
mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
|
|
mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
|
|
mxc_rtc_unlock(pdata);
|
|
return ret;
|
|
}
|
|
|
|
static const struct rtc_class_ops mxc_rtc_ops = {
|
|
.read_time = mxc_rtc_read_time,
|
|
.set_time = mxc_rtc_set_time,
|
|
.read_alarm = mxc_rtc_read_alarm,
|
|
.set_alarm = mxc_rtc_set_alarm,
|
|
.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
|
|
{
|
|
unsigned int timeout = REG_READ_TIMEOUT;
|
|
|
|
while (!(readl(ioaddr) & flag)) {
|
|
if (!--timeout)
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct mxc_rtc_data *pdata;
|
|
void __iomem *ioaddr;
|
|
int ret = 0;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pdata->ioaddr))
|
|
return PTR_ERR(pdata->ioaddr);
|
|
|
|
ioaddr = pdata->ioaddr;
|
|
|
|
pdata->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pdata->clk)) {
|
|
dev_err(&pdev->dev, "unable to get rtc clock!\n");
|
|
return PTR_ERR(pdata->clk);
|
|
}
|
|
|
|
spin_lock_init(&pdata->lock);
|
|
pdata->irq = platform_get_irq(pdev, 0);
|
|
if (pdata->irq < 0)
|
|
return pdata->irq;
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "failed to enable irq wake\n");
|
|
|
|
ret = clk_prepare_enable(pdata->clk);
|
|
if (ret)
|
|
return ret;
|
|
/* initialize glitch detect */
|
|
writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
|
|
|
|
/* clear lp interrupt status */
|
|
writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
|
|
|
|
/* move out of init state */
|
|
writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
|
|
ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
|
|
clk_disable_unprepare(pdata->clk);
|
|
return ret;
|
|
}
|
|
|
|
/* move out of non-valid state */
|
|
writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
|
|
SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
|
|
ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
|
|
clk_disable_unprepare(pdata->clk);
|
|
return ret;
|
|
}
|
|
|
|
pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
|
|
if (IS_ERR(pdata->rtc))
|
|
return PTR_ERR(pdata->rtc);
|
|
|
|
pdata->rtc->ops = &mxc_rtc_ops;
|
|
pdata->rtc->range_max = U32_MAX;
|
|
|
|
clk_disable(pdata->clk);
|
|
platform_set_drvdata(pdev, pdata);
|
|
ret =
|
|
devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
|
|
pdev->name, &pdev->dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "interrupt not available.\n");
|
|
clk_unprepare(pdata->clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = rtc_register_device(pdata->rtc);
|
|
if (ret < 0)
|
|
clk_unprepare(pdata->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxc_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(pdata->clk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mxc_ids[] = {
|
|
{ .compatible = "fsl,imx53-rtc", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver mxc_rtc_driver = {
|
|
.driver = {
|
|
.name = "mxc_rtc_v2",
|
|
.of_match_table = mxc_ids,
|
|
},
|
|
.probe = mxc_rtc_probe,
|
|
.remove = mxc_rtc_remove,
|
|
};
|
|
|
|
module_platform_driver(mxc_rtc_driver);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
|
MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
|
|
MODULE_LICENSE("GPL");
|