1387 lines
33 KiB
C
1387 lines
33 KiB
C
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/arch/at32ap7000.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/portmux.h>
|
|
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
#include "clock.h"
|
|
#include "hmatrix.h"
|
|
#include "pio.h"
|
|
#include "pm.h"
|
|
|
|
|
|
#define PBMEM(base) \
|
|
{ \
|
|
.start = base, \
|
|
.end = base + 0x3ff, \
|
|
.flags = IORESOURCE_MEM, \
|
|
}
|
|
#define IRQ(num) \
|
|
{ \
|
|
.start = num, \
|
|
.end = num, \
|
|
.flags = IORESOURCE_IRQ, \
|
|
}
|
|
#define NAMED_IRQ(num, _name) \
|
|
{ \
|
|
.start = num, \
|
|
.end = num, \
|
|
.name = _name, \
|
|
.flags = IORESOURCE_IRQ, \
|
|
}
|
|
|
|
/* REVISIT these assume *every* device supports DMA, but several
|
|
* don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
|
|
*/
|
|
#define DEFINE_DEV(_name, _id) \
|
|
static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
static struct platform_device _name##_id##_device = { \
|
|
.name = #_name, \
|
|
.id = _id, \
|
|
.dev = { \
|
|
.dma_mask = &_name##_id##_dma_mask, \
|
|
.coherent_dma_mask = DMA_32BIT_MASK, \
|
|
}, \
|
|
.resource = _name##_id##_resource, \
|
|
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
}
|
|
#define DEFINE_DEV_DATA(_name, _id) \
|
|
static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
static struct platform_device _name##_id##_device = { \
|
|
.name = #_name, \
|
|
.id = _id, \
|
|
.dev = { \
|
|
.dma_mask = &_name##_id##_dma_mask, \
|
|
.platform_data = &_name##_id##_data, \
|
|
.coherent_dma_mask = DMA_32BIT_MASK, \
|
|
}, \
|
|
.resource = _name##_id##_resource, \
|
|
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
}
|
|
|
|
#define select_peripheral(pin, periph, flags) \
|
|
at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
|
|
|
|
#define DEV_CLK(_name, devname, bus, _index) \
|
|
static struct clk devname##_##_name = { \
|
|
.name = #_name, \
|
|
.dev = &devname##_device.dev, \
|
|
.parent = &bus##_clk, \
|
|
.mode = bus##_clk_mode, \
|
|
.get_rate = bus##_clk_get_rate, \
|
|
.index = _index, \
|
|
}
|
|
|
|
static DEFINE_SPINLOCK(pm_lock);
|
|
|
|
unsigned long at32ap7000_osc_rates[3] = {
|
|
[0] = 32768,
|
|
/* FIXME: these are ATSTK1002-specific */
|
|
[1] = 20000000,
|
|
[2] = 12000000,
|
|
};
|
|
|
|
static unsigned long osc_get_rate(struct clk *clk)
|
|
{
|
|
return at32ap7000_osc_rates[clk->index];
|
|
}
|
|
|
|
static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
|
|
{
|
|
unsigned long div, mul, rate;
|
|
|
|
if (!(control & PM_BIT(PLLEN)))
|
|
return 0;
|
|
|
|
div = PM_BFEXT(PLLDIV, control) + 1;
|
|
mul = PM_BFEXT(PLLMUL, control) + 1;
|
|
|
|
rate = clk->parent->get_rate(clk->parent);
|
|
rate = (rate + div / 2) / div;
|
|
rate *= mul;
|
|
|
|
return rate;
|
|
}
|
|
|
|
static unsigned long pll0_get_rate(struct clk *clk)
|
|
{
|
|
u32 control;
|
|
|
|
control = pm_readl(PLL0);
|
|
|
|
return pll_get_rate(clk, control);
|
|
}
|
|
|
|
static unsigned long pll1_get_rate(struct clk *clk)
|
|
{
|
|
u32 control;
|
|
|
|
control = pm_readl(PLL1);
|
|
|
|
return pll_get_rate(clk, control);
|
|
}
|
|
|
|
/*
|
|
* The AT32AP7000 has five primary clock sources: One 32kHz
|
|
* oscillator, two crystal oscillators and two PLLs.
|
|
*/
|
|
static struct clk osc32k = {
|
|
.name = "osc32k",
|
|
.get_rate = osc_get_rate,
|
|
.users = 1,
|
|
.index = 0,
|
|
};
|
|
static struct clk osc0 = {
|
|
.name = "osc0",
|
|
.get_rate = osc_get_rate,
|
|
.users = 1,
|
|
.index = 1,
|
|
};
|
|
static struct clk osc1 = {
|
|
.name = "osc1",
|
|
.get_rate = osc_get_rate,
|
|
.index = 2,
|
|
};
|
|
static struct clk pll0 = {
|
|
.name = "pll0",
|
|
.get_rate = pll0_get_rate,
|
|
.parent = &osc0,
|
|
};
|
|
static struct clk pll1 = {
|
|
.name = "pll1",
|
|
.get_rate = pll1_get_rate,
|
|
.parent = &osc0,
|
|
};
|
|
|
|
/*
|
|
* The main clock can be either osc0 or pll0. The boot loader may
|
|
* have chosen one for us, so we don't really know which one until we
|
|
* have a look at the SM.
|
|
*/
|
|
static struct clk *main_clock;
|
|
|
|
/*
|
|
* Synchronous clocks are generated from the main clock. The clocks
|
|
* must satisfy the constraint
|
|
* fCPU >= fHSB >= fPB
|
|
* i.e. each clock must not be faster than its parent.
|
|
*/
|
|
static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
|
|
{
|
|
return main_clock->get_rate(main_clock) >> shift;
|
|
};
|
|
|
|
static void cpu_clk_mode(struct clk *clk, int enabled)
|
|
{
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&pm_lock, flags);
|
|
mask = pm_readl(CPU_MASK);
|
|
if (enabled)
|
|
mask |= 1 << clk->index;
|
|
else
|
|
mask &= ~(1 << clk->index);
|
|
pm_writel(CPU_MASK, mask);
|
|
spin_unlock_irqrestore(&pm_lock, flags);
|
|
}
|
|
|
|
static unsigned long cpu_clk_get_rate(struct clk *clk)
|
|
{
|
|
unsigned long cksel, shift = 0;
|
|
|
|
cksel = pm_readl(CKSEL);
|
|
if (cksel & PM_BIT(CPUDIV))
|
|
shift = PM_BFEXT(CPUSEL, cksel) + 1;
|
|
|
|
return bus_clk_get_rate(clk, shift);
|
|
}
|
|
|
|
static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
{
|
|
u32 control;
|
|
unsigned long parent_rate, child_div, actual_rate, div;
|
|
|
|
parent_rate = clk->parent->get_rate(clk->parent);
|
|
control = pm_readl(CKSEL);
|
|
|
|
if (control & PM_BIT(HSBDIV))
|
|
child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
|
|
else
|
|
child_div = 1;
|
|
|
|
if (rate > 3 * (parent_rate / 4) || child_div == 1) {
|
|
actual_rate = parent_rate;
|
|
control &= ~PM_BIT(CPUDIV);
|
|
} else {
|
|
unsigned int cpusel;
|
|
div = (parent_rate + rate / 2) / rate;
|
|
if (div > child_div)
|
|
div = child_div;
|
|
cpusel = (div > 1) ? (fls(div) - 2) : 0;
|
|
control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
|
|
actual_rate = parent_rate / (1 << (cpusel + 1));
|
|
}
|
|
|
|
pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
|
|
clk->name, rate, actual_rate);
|
|
|
|
if (apply)
|
|
pm_writel(CKSEL, control);
|
|
|
|
return actual_rate;
|
|
}
|
|
|
|
static void hsb_clk_mode(struct clk *clk, int enabled)
|
|
{
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&pm_lock, flags);
|
|
mask = pm_readl(HSB_MASK);
|
|
if (enabled)
|
|
mask |= 1 << clk->index;
|
|
else
|
|
mask &= ~(1 << clk->index);
|
|
pm_writel(HSB_MASK, mask);
|
|
spin_unlock_irqrestore(&pm_lock, flags);
|
|
}
|
|
|
|
static unsigned long hsb_clk_get_rate(struct clk *clk)
|
|
{
|
|
unsigned long cksel, shift = 0;
|
|
|
|
cksel = pm_readl(CKSEL);
|
|
if (cksel & PM_BIT(HSBDIV))
|
|
shift = PM_BFEXT(HSBSEL, cksel) + 1;
|
|
|
|
return bus_clk_get_rate(clk, shift);
|
|
}
|
|
|
|
static void pba_clk_mode(struct clk *clk, int enabled)
|
|
{
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&pm_lock, flags);
|
|
mask = pm_readl(PBA_MASK);
|
|
if (enabled)
|
|
mask |= 1 << clk->index;
|
|
else
|
|
mask &= ~(1 << clk->index);
|
|
pm_writel(PBA_MASK, mask);
|
|
spin_unlock_irqrestore(&pm_lock, flags);
|
|
}
|
|
|
|
static unsigned long pba_clk_get_rate(struct clk *clk)
|
|
{
|
|
unsigned long cksel, shift = 0;
|
|
|
|
cksel = pm_readl(CKSEL);
|
|
if (cksel & PM_BIT(PBADIV))
|
|
shift = PM_BFEXT(PBASEL, cksel) + 1;
|
|
|
|
return bus_clk_get_rate(clk, shift);
|
|
}
|
|
|
|
static void pbb_clk_mode(struct clk *clk, int enabled)
|
|
{
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&pm_lock, flags);
|
|
mask = pm_readl(PBB_MASK);
|
|
if (enabled)
|
|
mask |= 1 << clk->index;
|
|
else
|
|
mask &= ~(1 << clk->index);
|
|
pm_writel(PBB_MASK, mask);
|
|
spin_unlock_irqrestore(&pm_lock, flags);
|
|
}
|
|
|
|
static unsigned long pbb_clk_get_rate(struct clk *clk)
|
|
{
|
|
unsigned long cksel, shift = 0;
|
|
|
|
cksel = pm_readl(CKSEL);
|
|
if (cksel & PM_BIT(PBBDIV))
|
|
shift = PM_BFEXT(PBBSEL, cksel) + 1;
|
|
|
|
return bus_clk_get_rate(clk, shift);
|
|
}
|
|
|
|
static struct clk cpu_clk = {
|
|
.name = "cpu",
|
|
.get_rate = cpu_clk_get_rate,
|
|
.set_rate = cpu_clk_set_rate,
|
|
.users = 1,
|
|
};
|
|
static struct clk hsb_clk = {
|
|
.name = "hsb",
|
|
.parent = &cpu_clk,
|
|
.get_rate = hsb_clk_get_rate,
|
|
};
|
|
static struct clk pba_clk = {
|
|
.name = "pba",
|
|
.parent = &hsb_clk,
|
|
.mode = hsb_clk_mode,
|
|
.get_rate = pba_clk_get_rate,
|
|
.index = 1,
|
|
};
|
|
static struct clk pbb_clk = {
|
|
.name = "pbb",
|
|
.parent = &hsb_clk,
|
|
.mode = hsb_clk_mode,
|
|
.get_rate = pbb_clk_get_rate,
|
|
.users = 1,
|
|
.index = 2,
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Generic Clock operations
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static void genclk_mode(struct clk *clk, int enabled)
|
|
{
|
|
u32 control;
|
|
|
|
control = pm_readl(GCCTRL(clk->index));
|
|
if (enabled)
|
|
control |= PM_BIT(CEN);
|
|
else
|
|
control &= ~PM_BIT(CEN);
|
|
pm_writel(GCCTRL(clk->index), control);
|
|
}
|
|
|
|
static unsigned long genclk_get_rate(struct clk *clk)
|
|
{
|
|
u32 control;
|
|
unsigned long div = 1;
|
|
|
|
control = pm_readl(GCCTRL(clk->index));
|
|
if (control & PM_BIT(DIVEN))
|
|
div = 2 * (PM_BFEXT(DIV, control) + 1);
|
|
|
|
return clk->parent->get_rate(clk->parent) / div;
|
|
}
|
|
|
|
static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
{
|
|
u32 control;
|
|
unsigned long parent_rate, actual_rate, div;
|
|
|
|
parent_rate = clk->parent->get_rate(clk->parent);
|
|
control = pm_readl(GCCTRL(clk->index));
|
|
|
|
if (rate > 3 * parent_rate / 4) {
|
|
actual_rate = parent_rate;
|
|
control &= ~PM_BIT(DIVEN);
|
|
} else {
|
|
div = (parent_rate + rate) / (2 * rate) - 1;
|
|
control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
|
|
actual_rate = parent_rate / (2 * (div + 1));
|
|
}
|
|
|
|
dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
|
|
clk->name, rate, actual_rate);
|
|
|
|
if (apply)
|
|
pm_writel(GCCTRL(clk->index), control);
|
|
|
|
return actual_rate;
|
|
}
|
|
|
|
int genclk_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
u32 control;
|
|
|
|
dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
|
|
clk->name, parent->name, clk->parent->name);
|
|
|
|
control = pm_readl(GCCTRL(clk->index));
|
|
|
|
if (parent == &osc1 || parent == &pll1)
|
|
control |= PM_BIT(OSCSEL);
|
|
else if (parent == &osc0 || parent == &pll0)
|
|
control &= ~PM_BIT(OSCSEL);
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (parent == &pll0 || parent == &pll1)
|
|
control |= PM_BIT(PLLSEL);
|
|
else
|
|
control &= ~PM_BIT(PLLSEL);
|
|
|
|
pm_writel(GCCTRL(clk->index), control);
|
|
clk->parent = parent;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init genclk_init_parent(struct clk *clk)
|
|
{
|
|
u32 control;
|
|
struct clk *parent;
|
|
|
|
BUG_ON(clk->index > 7);
|
|
|
|
control = pm_readl(GCCTRL(clk->index));
|
|
if (control & PM_BIT(OSCSEL))
|
|
parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
|
|
else
|
|
parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
|
|
|
|
clk->parent = parent;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* System peripherals
|
|
* -------------------------------------------------------------------- */
|
|
static struct resource at32_pm0_resource[] = {
|
|
{
|
|
.start = 0xfff00000,
|
|
.end = 0xfff0007f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
IRQ(20),
|
|
};
|
|
|
|
static struct resource at32ap700x_rtc0_resource[] = {
|
|
{
|
|
.start = 0xfff00080,
|
|
.end = 0xfff000af,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
IRQ(21),
|
|
};
|
|
|
|
static struct resource at32_wdt0_resource[] = {
|
|
{
|
|
.start = 0xfff000b0,
|
|
.end = 0xfff000bf,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct resource at32_eic0_resource[] = {
|
|
{
|
|
.start = 0xfff00100,
|
|
.end = 0xfff0013f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
IRQ(19),
|
|
};
|
|
|
|
DEFINE_DEV(at32_pm, 0);
|
|
DEFINE_DEV(at32ap700x_rtc, 0);
|
|
DEFINE_DEV(at32_wdt, 0);
|
|
DEFINE_DEV(at32_eic, 0);
|
|
|
|
/*
|
|
* Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
|
|
* is always running.
|
|
*/
|
|
static struct clk at32_pm_pclk = {
|
|
.name = "pclk",
|
|
.dev = &at32_pm0_device.dev,
|
|
.parent = &pbb_clk,
|
|
.mode = pbb_clk_mode,
|
|
.get_rate = pbb_clk_get_rate,
|
|
.users = 1,
|
|
.index = 0,
|
|
};
|
|
|
|
static struct resource intc0_resource[] = {
|
|
PBMEM(0xfff00400),
|
|
};
|
|
struct platform_device at32_intc0_device = {
|
|
.name = "intc",
|
|
.id = 0,
|
|
.resource = intc0_resource,
|
|
.num_resources = ARRAY_SIZE(intc0_resource),
|
|
};
|
|
DEV_CLK(pclk, at32_intc0, pbb, 1);
|
|
|
|
static struct clk ebi_clk = {
|
|
.name = "ebi",
|
|
.parent = &hsb_clk,
|
|
.mode = hsb_clk_mode,
|
|
.get_rate = hsb_clk_get_rate,
|
|
.users = 1,
|
|
};
|
|
static struct clk hramc_clk = {
|
|
.name = "hramc",
|
|
.parent = &hsb_clk,
|
|
.mode = hsb_clk_mode,
|
|
.get_rate = hsb_clk_get_rate,
|
|
.users = 1,
|
|
.index = 3,
|
|
};
|
|
|
|
static struct resource smc0_resource[] = {
|
|
PBMEM(0xfff03400),
|
|
};
|
|
DEFINE_DEV(smc, 0);
|
|
DEV_CLK(pclk, smc0, pbb, 13);
|
|
DEV_CLK(mck, smc0, hsb, 0);
|
|
|
|
static struct platform_device pdc_device = {
|
|
.name = "pdc",
|
|
.id = 0,
|
|
};
|
|
DEV_CLK(hclk, pdc, hsb, 4);
|
|
DEV_CLK(pclk, pdc, pba, 16);
|
|
|
|
static struct clk pico_clk = {
|
|
.name = "pico",
|
|
.parent = &cpu_clk,
|
|
.mode = cpu_clk_mode,
|
|
.get_rate = cpu_clk_get_rate,
|
|
.users = 1,
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* HMATRIX
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct clk hmatrix_clk = {
|
|
.name = "hmatrix_clk",
|
|
.parent = &pbb_clk,
|
|
.mode = pbb_clk_mode,
|
|
.get_rate = pbb_clk_get_rate,
|
|
.index = 2,
|
|
.users = 1,
|
|
};
|
|
#define HMATRIX_BASE ((void __iomem *)0xfff00800)
|
|
|
|
#define hmatrix_readl(reg) \
|
|
__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
|
|
#define hmatrix_writel(reg,value) \
|
|
__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
|
|
|
|
/*
|
|
* Set bits in the HMATRIX Special Function Register (SFR) used by the
|
|
* External Bus Interface (EBI). This can be used to enable special
|
|
* features like CompactFlash support, NAND Flash support, etc. on
|
|
* certain chipselects.
|
|
*/
|
|
static inline void set_ebi_sfr_bits(u32 mask)
|
|
{
|
|
u32 sfr;
|
|
|
|
clk_enable(&hmatrix_clk);
|
|
sfr = hmatrix_readl(SFR4);
|
|
sfr |= mask;
|
|
hmatrix_writel(SFR4, sfr);
|
|
clk_disable(&hmatrix_clk);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* System Timer/Counter (TC)
|
|
* -------------------------------------------------------------------- */
|
|
static struct resource at32_systc0_resource[] = {
|
|
PBMEM(0xfff00c00),
|
|
IRQ(22),
|
|
};
|
|
struct platform_device at32_systc0_device = {
|
|
.name = "systc",
|
|
.id = 0,
|
|
.resource = at32_systc0_resource,
|
|
.num_resources = ARRAY_SIZE(at32_systc0_resource),
|
|
};
|
|
DEV_CLK(pclk, at32_systc0, pbb, 3);
|
|
|
|
/* --------------------------------------------------------------------
|
|
* PIO
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct resource pio0_resource[] = {
|
|
PBMEM(0xffe02800),
|
|
IRQ(13),
|
|
};
|
|
DEFINE_DEV(pio, 0);
|
|
DEV_CLK(mck, pio0, pba, 10);
|
|
|
|
static struct resource pio1_resource[] = {
|
|
PBMEM(0xffe02c00),
|
|
IRQ(14),
|
|
};
|
|
DEFINE_DEV(pio, 1);
|
|
DEV_CLK(mck, pio1, pba, 11);
|
|
|
|
static struct resource pio2_resource[] = {
|
|
PBMEM(0xffe03000),
|
|
IRQ(15),
|
|
};
|
|
DEFINE_DEV(pio, 2);
|
|
DEV_CLK(mck, pio2, pba, 12);
|
|
|
|
static struct resource pio3_resource[] = {
|
|
PBMEM(0xffe03400),
|
|
IRQ(16),
|
|
};
|
|
DEFINE_DEV(pio, 3);
|
|
DEV_CLK(mck, pio3, pba, 13);
|
|
|
|
static struct resource pio4_resource[] = {
|
|
PBMEM(0xffe03800),
|
|
IRQ(17),
|
|
};
|
|
DEFINE_DEV(pio, 4);
|
|
DEV_CLK(mck, pio4, pba, 14);
|
|
|
|
void __init at32_add_system_devices(void)
|
|
{
|
|
platform_device_register(&at32_pm0_device);
|
|
platform_device_register(&at32_intc0_device);
|
|
platform_device_register(&at32ap700x_rtc0_device);
|
|
platform_device_register(&at32_wdt0_device);
|
|
platform_device_register(&at32_eic0_device);
|
|
platform_device_register(&smc0_device);
|
|
platform_device_register(&pdc_device);
|
|
|
|
platform_device_register(&at32_systc0_device);
|
|
|
|
platform_device_register(&pio0_device);
|
|
platform_device_register(&pio1_device);
|
|
platform_device_register(&pio2_device);
|
|
platform_device_register(&pio3_device);
|
|
platform_device_register(&pio4_device);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USART
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct atmel_uart_data atmel_usart0_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
static struct resource atmel_usart0_resource[] = {
|
|
PBMEM(0xffe00c00),
|
|
IRQ(6),
|
|
};
|
|
DEFINE_DEV_DATA(atmel_usart, 0);
|
|
DEV_CLK(usart, atmel_usart0, pba, 4);
|
|
|
|
static struct atmel_uart_data atmel_usart1_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
static struct resource atmel_usart1_resource[] = {
|
|
PBMEM(0xffe01000),
|
|
IRQ(7),
|
|
};
|
|
DEFINE_DEV_DATA(atmel_usart, 1);
|
|
DEV_CLK(usart, atmel_usart1, pba, 4);
|
|
|
|
static struct atmel_uart_data atmel_usart2_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
static struct resource atmel_usart2_resource[] = {
|
|
PBMEM(0xffe01400),
|
|
IRQ(8),
|
|
};
|
|
DEFINE_DEV_DATA(atmel_usart, 2);
|
|
DEV_CLK(usart, atmel_usart2, pba, 5);
|
|
|
|
static struct atmel_uart_data atmel_usart3_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
static struct resource atmel_usart3_resource[] = {
|
|
PBMEM(0xffe01800),
|
|
IRQ(9),
|
|
};
|
|
DEFINE_DEV_DATA(atmel_usart, 3);
|
|
DEV_CLK(usart, atmel_usart3, pba, 6);
|
|
|
|
static inline void configure_usart0_pins(void)
|
|
{
|
|
select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
|
|
select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
|
|
}
|
|
|
|
static inline void configure_usart1_pins(void)
|
|
{
|
|
select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
|
|
select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
|
|
}
|
|
|
|
static inline void configure_usart2_pins(void)
|
|
{
|
|
select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
|
|
select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
|
|
}
|
|
|
|
static inline void configure_usart3_pins(void)
|
|
{
|
|
select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
|
|
select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
|
|
}
|
|
|
|
static struct platform_device *__initdata at32_usarts[4];
|
|
|
|
void __init at32_map_usart(unsigned int hw_id, unsigned int line)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
switch (hw_id) {
|
|
case 0:
|
|
pdev = &atmel_usart0_device;
|
|
configure_usart0_pins();
|
|
break;
|
|
case 1:
|
|
pdev = &atmel_usart1_device;
|
|
configure_usart1_pins();
|
|
break;
|
|
case 2:
|
|
pdev = &atmel_usart2_device;
|
|
configure_usart2_pins();
|
|
break;
|
|
case 3:
|
|
pdev = &atmel_usart3_device;
|
|
configure_usart3_pins();
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (PXSEG(pdev->resource[0].start) == P4SEG) {
|
|
/* Addresses in the P4 segment are permanently mapped 1:1 */
|
|
struct atmel_uart_data *data = pdev->dev.platform_data;
|
|
data->regs = (void __iomem *)pdev->resource[0].start;
|
|
}
|
|
|
|
pdev->id = line;
|
|
at32_usarts[line] = pdev;
|
|
}
|
|
|
|
struct platform_device *__init at32_add_device_usart(unsigned int id)
|
|
{
|
|
platform_device_register(at32_usarts[id]);
|
|
return at32_usarts[id];
|
|
}
|
|
|
|
struct platform_device *atmel_default_console_device;
|
|
|
|
void __init at32_setup_serial_console(unsigned int usart_id)
|
|
{
|
|
atmel_default_console_device = at32_usarts[usart_id];
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Ethernet
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct eth_platform_data macb0_data;
|
|
static struct resource macb0_resource[] = {
|
|
PBMEM(0xfff01800),
|
|
IRQ(25),
|
|
};
|
|
DEFINE_DEV_DATA(macb, 0);
|
|
DEV_CLK(hclk, macb0, hsb, 8);
|
|
DEV_CLK(pclk, macb0, pbb, 6);
|
|
|
|
static struct eth_platform_data macb1_data;
|
|
static struct resource macb1_resource[] = {
|
|
PBMEM(0xfff01c00),
|
|
IRQ(26),
|
|
};
|
|
DEFINE_DEV_DATA(macb, 1);
|
|
DEV_CLK(hclk, macb1, hsb, 9);
|
|
DEV_CLK(pclk, macb1, pbb, 7);
|
|
|
|
struct platform_device *__init
|
|
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
switch (id) {
|
|
case 0:
|
|
pdev = &macb0_device;
|
|
|
|
select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
|
|
select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
|
|
select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
|
|
select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
|
|
select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
|
|
select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
|
|
select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
|
|
select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
|
|
select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
|
|
select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
|
|
|
|
if (!data->is_rmii) {
|
|
select_peripheral(PC(0), PERIPH_A, 0); /* COL */
|
|
select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
|
|
select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
|
|
select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
|
|
select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
|
|
select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
|
|
select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
|
|
select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
|
|
select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
pdev = &macb1_device;
|
|
|
|
select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
|
|
select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
|
|
select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
|
|
select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
|
|
select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
|
|
select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
|
|
select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
|
|
select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
|
|
select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
|
|
select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
|
|
|
|
if (!data->is_rmii) {
|
|
select_peripheral(PC(19), PERIPH_B, 0); /* COL */
|
|
select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
|
|
select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
|
|
select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
|
|
select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
|
|
select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
|
|
select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
|
|
select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
|
|
select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
|
|
platform_device_register(pdev);
|
|
|
|
return pdev;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
static struct resource atmel_spi0_resource[] = {
|
|
PBMEM(0xffe00000),
|
|
IRQ(3),
|
|
};
|
|
DEFINE_DEV(atmel_spi, 0);
|
|
DEV_CLK(spi_clk, atmel_spi0, pba, 0);
|
|
|
|
static struct resource atmel_spi1_resource[] = {
|
|
PBMEM(0xffe00400),
|
|
IRQ(4),
|
|
};
|
|
DEFINE_DEV(atmel_spi, 1);
|
|
DEV_CLK(spi_clk, atmel_spi1, pba, 1);
|
|
|
|
static void __init
|
|
at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
|
|
unsigned int n, const u8 *pins)
|
|
{
|
|
unsigned int pin, mode;
|
|
|
|
for (; n; n--, b++) {
|
|
b->bus_num = bus_num;
|
|
if (b->chip_select >= 4)
|
|
continue;
|
|
pin = (unsigned)b->controller_data;
|
|
if (!pin) {
|
|
pin = pins[b->chip_select];
|
|
b->controller_data = (void *)pin;
|
|
}
|
|
mode = AT32_GPIOF_OUTPUT;
|
|
if (!(b->mode & SPI_CS_HIGH))
|
|
mode |= AT32_GPIOF_HIGH;
|
|
at32_select_gpio(pin, mode);
|
|
}
|
|
}
|
|
|
|
struct platform_device *__init
|
|
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
|
|
{
|
|
/*
|
|
* Manage the chipselects as GPIOs, normally using the same pins
|
|
* the SPI controller expects; but boards can use other pins.
|
|
*/
|
|
static u8 __initdata spi0_pins[] =
|
|
{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
|
|
GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
|
|
static u8 __initdata spi1_pins[] =
|
|
{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
|
|
GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
|
|
struct platform_device *pdev;
|
|
|
|
switch (id) {
|
|
case 0:
|
|
pdev = &atmel_spi0_device;
|
|
select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
|
|
select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
|
|
select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
|
|
at32_spi_setup_slaves(0, b, n, spi0_pins);
|
|
break;
|
|
|
|
case 1:
|
|
pdev = &atmel_spi1_device;
|
|
select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
|
|
select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
|
|
select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
|
|
at32_spi_setup_slaves(1, b, n, spi1_pins);
|
|
break;
|
|
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
spi_register_board_info(b, n);
|
|
platform_device_register(pdev);
|
|
return pdev;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* LCDC
|
|
* -------------------------------------------------------------------- */
|
|
static struct atmel_lcdfb_info atmel_lcdfb0_data;
|
|
static struct resource atmel_lcdfb0_resource[] = {
|
|
{
|
|
.start = 0xff000000,
|
|
.end = 0xff000fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
IRQ(1),
|
|
{
|
|
/* Placeholder for pre-allocated fb memory */
|
|
.start = 0x00000000,
|
|
.end = 0x00000000,
|
|
.flags = 0,
|
|
},
|
|
};
|
|
DEFINE_DEV_DATA(atmel_lcdfb, 0);
|
|
DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
|
|
static struct clk atmel_lcdfb0_pixclk = {
|
|
.name = "lcdc_clk",
|
|
.dev = &atmel_lcdfb0_device.dev,
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 7,
|
|
};
|
|
|
|
struct platform_device *__init
|
|
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
|
|
unsigned long fbmem_start, unsigned long fbmem_len)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct atmel_lcdfb_info *info;
|
|
struct fb_monspecs *monspecs;
|
|
struct fb_videomode *modedb;
|
|
unsigned int modedb_size;
|
|
|
|
/*
|
|
* Do a deep copy of the fb data, monspecs and modedb. Make
|
|
* sure all allocations are done before setting up the
|
|
* portmux.
|
|
*/
|
|
monspecs = kmemdup(data->default_monspecs,
|
|
sizeof(struct fb_monspecs), GFP_KERNEL);
|
|
if (!monspecs)
|
|
return NULL;
|
|
|
|
modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
|
|
modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
|
|
if (!modedb)
|
|
goto err_dup_modedb;
|
|
monspecs->modedb = modedb;
|
|
|
|
switch (id) {
|
|
case 0:
|
|
pdev = &atmel_lcdfb0_device;
|
|
select_peripheral(PC(19), PERIPH_A, 0); /* CC */
|
|
select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
|
|
select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
|
|
select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
|
|
select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
|
|
select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
|
|
select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
|
|
select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
|
|
select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
|
|
select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
|
|
select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
|
|
select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
|
|
select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
|
|
select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
|
|
select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
|
|
select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
|
|
select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
|
|
select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
|
|
select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
|
|
select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
|
|
|
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
|
|
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
|
|
break;
|
|
|
|
default:
|
|
goto err_invalid_id;
|
|
}
|
|
|
|
if (fbmem_len) {
|
|
pdev->resource[2].start = fbmem_start;
|
|
pdev->resource[2].end = fbmem_start + fbmem_len - 1;
|
|
pdev->resource[2].flags = IORESOURCE_MEM;
|
|
}
|
|
|
|
info = pdev->dev.platform_data;
|
|
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
|
|
info->default_monspecs = monspecs;
|
|
|
|
platform_device_register(pdev);
|
|
return pdev;
|
|
|
|
err_invalid_id:
|
|
kfree(modedb);
|
|
err_dup_modedb:
|
|
kfree(monspecs);
|
|
return NULL;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SSC
|
|
* -------------------------------------------------------------------- */
|
|
static struct resource ssc0_resource[] = {
|
|
PBMEM(0xffe01c00),
|
|
IRQ(10),
|
|
};
|
|
DEFINE_DEV(ssc, 0);
|
|
DEV_CLK(pclk, ssc0, pba, 7);
|
|
|
|
static struct resource ssc1_resource[] = {
|
|
PBMEM(0xffe02000),
|
|
IRQ(11),
|
|
};
|
|
DEFINE_DEV(ssc, 1);
|
|
DEV_CLK(pclk, ssc1, pba, 8);
|
|
|
|
static struct resource ssc2_resource[] = {
|
|
PBMEM(0xffe02400),
|
|
IRQ(12),
|
|
};
|
|
DEFINE_DEV(ssc, 2);
|
|
DEV_CLK(pclk, ssc2, pba, 9);
|
|
|
|
struct platform_device *__init
|
|
at32_add_device_ssc(unsigned int id, unsigned int flags)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
switch (id) {
|
|
case 0:
|
|
pdev = &ssc0_device;
|
|
if (flags & ATMEL_SSC_RF)
|
|
select_peripheral(PA(21), PERIPH_A, 0); /* RF */
|
|
if (flags & ATMEL_SSC_RK)
|
|
select_peripheral(PA(22), PERIPH_A, 0); /* RK */
|
|
if (flags & ATMEL_SSC_TK)
|
|
select_peripheral(PA(23), PERIPH_A, 0); /* TK */
|
|
if (flags & ATMEL_SSC_TF)
|
|
select_peripheral(PA(24), PERIPH_A, 0); /* TF */
|
|
if (flags & ATMEL_SSC_TD)
|
|
select_peripheral(PA(25), PERIPH_A, 0); /* TD */
|
|
if (flags & ATMEL_SSC_RD)
|
|
select_peripheral(PA(26), PERIPH_A, 0); /* RD */
|
|
break;
|
|
case 1:
|
|
pdev = &ssc1_device;
|
|
if (flags & ATMEL_SSC_RF)
|
|
select_peripheral(PA(0), PERIPH_B, 0); /* RF */
|
|
if (flags & ATMEL_SSC_RK)
|
|
select_peripheral(PA(1), PERIPH_B, 0); /* RK */
|
|
if (flags & ATMEL_SSC_TK)
|
|
select_peripheral(PA(2), PERIPH_B, 0); /* TK */
|
|
if (flags & ATMEL_SSC_TF)
|
|
select_peripheral(PA(3), PERIPH_B, 0); /* TF */
|
|
if (flags & ATMEL_SSC_TD)
|
|
select_peripheral(PA(4), PERIPH_B, 0); /* TD */
|
|
if (flags & ATMEL_SSC_RD)
|
|
select_peripheral(PA(5), PERIPH_B, 0); /* RD */
|
|
break;
|
|
case 2:
|
|
pdev = &ssc2_device;
|
|
if (flags & ATMEL_SSC_TD)
|
|
select_peripheral(PB(13), PERIPH_A, 0); /* TD */
|
|
if (flags & ATMEL_SSC_RD)
|
|
select_peripheral(PB(14), PERIPH_A, 0); /* RD */
|
|
if (flags & ATMEL_SSC_TK)
|
|
select_peripheral(PB(15), PERIPH_A, 0); /* TK */
|
|
if (flags & ATMEL_SSC_TF)
|
|
select_peripheral(PB(16), PERIPH_A, 0); /* TF */
|
|
if (flags & ATMEL_SSC_RF)
|
|
select_peripheral(PB(17), PERIPH_A, 0); /* RF */
|
|
if (flags & ATMEL_SSC_RK)
|
|
select_peripheral(PB(18), PERIPH_A, 0); /* RK */
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
platform_device_register(pdev);
|
|
return pdev;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Device Controller
|
|
* -------------------------------------------------------------------- */
|
|
static struct resource usba0_resource[] __initdata = {
|
|
{
|
|
.start = 0xff300000,
|
|
.end = 0xff3fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = 0xfff03000,
|
|
.end = 0xfff033ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
IRQ(31),
|
|
};
|
|
static struct clk usba0_pclk = {
|
|
.name = "pclk",
|
|
.parent = &pbb_clk,
|
|
.mode = pbb_clk_mode,
|
|
.get_rate = pbb_clk_get_rate,
|
|
.index = 12,
|
|
};
|
|
static struct clk usba0_hclk = {
|
|
.name = "hclk",
|
|
.parent = &hsb_clk,
|
|
.mode = hsb_clk_mode,
|
|
.get_rate = hsb_clk_get_rate,
|
|
.index = 6,
|
|
};
|
|
|
|
struct platform_device *__init
|
|
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
if (id != 0)
|
|
return NULL;
|
|
|
|
pdev = platform_device_alloc("atmel_usba_udc", 0);
|
|
if (!pdev)
|
|
return NULL;
|
|
|
|
if (platform_device_add_resources(pdev, usba0_resource,
|
|
ARRAY_SIZE(usba0_resource)))
|
|
goto out_free_pdev;
|
|
|
|
if (data) {
|
|
if (platform_device_add_data(pdev, data, sizeof(*data)))
|
|
goto out_free_pdev;
|
|
|
|
if (data->vbus_pin != GPIO_PIN_NONE)
|
|
at32_select_gpio(data->vbus_pin, 0);
|
|
}
|
|
|
|
usba0_pclk.dev = &pdev->dev;
|
|
usba0_hclk.dev = &pdev->dev;
|
|
|
|
platform_device_add(pdev);
|
|
|
|
return pdev;
|
|
|
|
out_free_pdev:
|
|
platform_device_put(pdev);
|
|
return NULL;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* GCLK
|
|
* -------------------------------------------------------------------- */
|
|
static struct clk gclk0 = {
|
|
.name = "gclk0",
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 0,
|
|
};
|
|
static struct clk gclk1 = {
|
|
.name = "gclk1",
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 1,
|
|
};
|
|
static struct clk gclk2 = {
|
|
.name = "gclk2",
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 2,
|
|
};
|
|
static struct clk gclk3 = {
|
|
.name = "gclk3",
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 3,
|
|
};
|
|
static struct clk gclk4 = {
|
|
.name = "gclk4",
|
|
.mode = genclk_mode,
|
|
.get_rate = genclk_get_rate,
|
|
.set_rate = genclk_set_rate,
|
|
.set_parent = genclk_set_parent,
|
|
.index = 4,
|
|
};
|
|
|
|
struct clk *at32_clock_list[] = {
|
|
&osc32k,
|
|
&osc0,
|
|
&osc1,
|
|
&pll0,
|
|
&pll1,
|
|
&cpu_clk,
|
|
&hsb_clk,
|
|
&pba_clk,
|
|
&pbb_clk,
|
|
&at32_pm_pclk,
|
|
&at32_intc0_pclk,
|
|
&hmatrix_clk,
|
|
&ebi_clk,
|
|
&hramc_clk,
|
|
&smc0_pclk,
|
|
&smc0_mck,
|
|
&pdc_hclk,
|
|
&pdc_pclk,
|
|
&pico_clk,
|
|
&pio0_mck,
|
|
&pio1_mck,
|
|
&pio2_mck,
|
|
&pio3_mck,
|
|
&pio4_mck,
|
|
&at32_systc0_pclk,
|
|
&atmel_usart0_usart,
|
|
&atmel_usart1_usart,
|
|
&atmel_usart2_usart,
|
|
&atmel_usart3_usart,
|
|
&macb0_hclk,
|
|
&macb0_pclk,
|
|
&macb1_hclk,
|
|
&macb1_pclk,
|
|
&atmel_spi0_spi_clk,
|
|
&atmel_spi1_spi_clk,
|
|
&atmel_lcdfb0_hck1,
|
|
&atmel_lcdfb0_pixclk,
|
|
&ssc0_pclk,
|
|
&ssc1_pclk,
|
|
&ssc2_pclk,
|
|
&usba0_hclk,
|
|
&usba0_pclk,
|
|
&gclk0,
|
|
&gclk1,
|
|
&gclk2,
|
|
&gclk3,
|
|
&gclk4,
|
|
};
|
|
unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
|
|
|
|
void __init at32_portmux_init(void)
|
|
{
|
|
at32_init_pio(&pio0_device);
|
|
at32_init_pio(&pio1_device);
|
|
at32_init_pio(&pio2_device);
|
|
at32_init_pio(&pio3_device);
|
|
at32_init_pio(&pio4_device);
|
|
}
|
|
|
|
void __init at32_clock_init(void)
|
|
{
|
|
u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
|
|
int i;
|
|
|
|
if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
|
|
main_clock = &pll0;
|
|
cpu_clk.parent = &pll0;
|
|
} else {
|
|
main_clock = &osc0;
|
|
cpu_clk.parent = &osc0;
|
|
}
|
|
|
|
if (pm_readl(PLL0) & PM_BIT(PLLOSC))
|
|
pll0.parent = &osc1;
|
|
if (pm_readl(PLL1) & PM_BIT(PLLOSC))
|
|
pll1.parent = &osc1;
|
|
|
|
genclk_init_parent(&gclk0);
|
|
genclk_init_parent(&gclk1);
|
|
genclk_init_parent(&gclk2);
|
|
genclk_init_parent(&gclk3);
|
|
genclk_init_parent(&gclk4);
|
|
genclk_init_parent(&atmel_lcdfb0_pixclk);
|
|
|
|
/*
|
|
* Turn on all clocks that have at least one user already, and
|
|
* turn off everything else. We only do this for module
|
|
* clocks, and even though it isn't particularly pretty to
|
|
* check the address of the mode function, it should do the
|
|
* trick...
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
|
|
struct clk *clk = at32_clock_list[i];
|
|
|
|
if (clk->users == 0)
|
|
continue;
|
|
|
|
if (clk->mode == &cpu_clk_mode)
|
|
cpu_mask |= 1 << clk->index;
|
|
else if (clk->mode == &hsb_clk_mode)
|
|
hsb_mask |= 1 << clk->index;
|
|
else if (clk->mode == &pba_clk_mode)
|
|
pba_mask |= 1 << clk->index;
|
|
else if (clk->mode == &pbb_clk_mode)
|
|
pbb_mask |= 1 << clk->index;
|
|
}
|
|
|
|
pm_writel(CPU_MASK, cpu_mask);
|
|
pm_writel(HSB_MASK, hsb_mask);
|
|
pm_writel(PBA_MASK, pba_mask);
|
|
pm_writel(PBB_MASK, pbb_mask);
|
|
}
|